Availability
Showing In Stock Items. Show All 21 Items.
On Sale
AEM Electronics CD-7 digital racing dash displays feature 7 in. full-color digital screens that are super bright, high contrast, and with sunlight-readable displays. To ensure visibility at all times, they also have integrated glare diffusers and shade hoods to overcome the brightest daylight conditions. The CD-7s are designed to accept channels from CAN bus connections—and two CAN bus channels are included so that they can receive and collect data from AEMnet-enabled devices. Seven ultra-bright LEDs span the top of the display housing for rpm and shift light indication. You can program them to ascend in specific increments based on rpm range, and flash when it's time to shift. Brightness is also programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting—even with driving gloves on. These button functions are duplicated on the rear connector, allowing you to mount remote buttons on the steering wheel, if desired. Two additional programmable LEDs are located above the toggle buttons on the sides of the housing. AEM offers the CD-7 as "display only" (non-logging) or with built-in logger (CD-7L). The units are available in either a cast aluminum or carbon fiber composite housing—with sealed connectors on the rear and anti-vibration mounts.
( 2 )
$1,699.95
—
$2,099.95
$1,528.95
—
$1,888.95
On Sale
These MSD 8-Plus CD ignitions produce the same extreme output as the original 8-series, yet they are now in a smaller housing with improved efficiency and internal components. The new 8-Plus ignitions feature built-in, 2-step rev control. Now you can switch between two rev limits without extra wiring or housings. For those who are looking for a dual-fire MSD 8, the MSD 8-Plus CD ignitions are all that you need. MSD's engineers were able to deliver ignitions that are capable of firing two coils at once for those extreme racers using dual plug race setups.
( 3 )
$2,099.95
$1,888.95
On Sale
Stainless Works Redline Factory Connect exhaust systems with H-pipes deliver improved sound and performance for your new Mustang muscle car. SW has engineered drone-free aggressive mufflers tuned specifically for the improved Coyote engine from Ford. The systems are built from corrosion-resistant 304 stainless steel and TIG-welded in their state-of-the-art facility. Stainless Works Redline Factory Connect exhaust systems with H-pipes are available for systems with or without active exhaust valves. Their in-house engineered valve bolts directly to the factory electronics to allow for all exhaust modes, from the closed valve "quiet" mode, to the chambered "normal" mode, and to the wide open straight-through design on "track" mode. Stainless Works Redline H-pipe systems feature: * Redline System—their most aggressive sound * Factory Connect--necks down at factory connection point * 3 in. mandrel-bent tubing offers improved flow over stock exhaust * H-pipe crossover * Tuned mufflers for aggressive muscle car sound * Quad polished tips * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$2,196.40
—
$2,576.40
$1,849.60
—
$2,169.60
On Sale
Stainless Works Redline Factory Connect exhaust systems with X-pipes deliver improved sound and performance for your new muscle car. SW has engineered drone-free aggressive mufflers tuned specifically for your ride's V8 engine. The systems are built from corrosion-resistant 304 stainless steel and TIG-welded in their state-of-the-art facility. Stainless Works Redline Factory Connect exhaust systems with X-pipes are available for systems with or without active exhaust valves. Their in-house engineered valve bolts directly to the factory electronics to allow for all exhaust modes, from the closed valve "quiet" mode, to the chambered "normal" mode, and to the wide open straight-through design on "track" mode. Stainless Works Redline X-pipe systems feature: * Redline System—their most aggressive sound * Factory Connect--necks down at factory connection point * 3 in. mandrel-bent tubing offers improved flow over stock exhaust * X-pipe crossover * Tuned mufflers for aggressive muscle car sound * Quad polished or matte black tips * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
( 2 )
$2,124.20
—
$2,576.40
$1,788.80
—
$2,169.60
On Sale
Holley Dominator EFI vehicle management systems are intended for all engine applications, from street to high-end racing. They have nearly unlimited capabilities to control any power adder, input, or output that you can throw at them. Features include: * 12 sequentially driven 8:2 peak and hold injector drivers capable of driving up to 24 low or high-impedance injectors * 12-channel distributorless ignition outputs capable of directly driving smart ignition coils or Holley DIS coils * Plug-and-play control of factory GM 24x and 58x LSX engines * Integrated electronic transmission control--currently can control GM 4L60E and 4L80E * Integrated dual channel wideband oxygen sensor controls, work with NTK or Bosch sensors * Integrated drive by wire throttle body control, can control two drive by wire throttle bodies * 4-stage progressive nitrous oxide controller * Turbo boost control * Integrated water/methanol injection control * Integrated data acquisition and control allowed with massive amount of programmable inputs and outputs * Internal data logging standard with a huge 2 GB of memory * Self-tuning fuel table strategy greatly simplifies tuning process * Store and change between four calibrations * Individual cylinder fuel and spark control allows you to unlock your engine's potential
( 6 )
$2,349.95
$2,113.95
On Sale
The MSD Direct Ignition System (DIS) controller greatly simplifies the conversion from conventional distributor-type engines to a coil-per-plug configuration. Benefits include the elimination of distributor cap and rotor wear; reduced spark energy losses caused by long spark plug wires; and the ability to optimize your ignition tuning parameters. The integral 2.5 bar MAP sensor and optional temperature sensor input mean you get the most power and reliability out of your naturally aspirated or forced induction engine. Nitrous-fed engines benefit from the included Step Retard feature. Drag racers will appreciate the 2-Step rev limiter and Launch Retard features. Real-time DIS configuration and tune-up changes are a snap with easy-to-use MSDView software. Thanks to the real-time monitor feature of MSDView, and 8 MB of internal data storage in the DIS controller, data monitoring and logging have never been easier. The clearly labeled wiring harness, along with a full line of supporting components and accessories, take the difficulty and guesswork out of converting traditional distributor-type engines to a modern and efficient coil-per-plug ignition system. Features include: * Easily convert to a coil-per-plug ignition system * Pre-programmed timing maps * Fully programmable 2D and 3D timing maps provide complete timing control * Individual Cylinder Timing (ICT) allows precise tuning * Built-in 2.5 bar MAP sensor for boosted applications * Optional temperature sensor input to control timing based on temperature * Fully potted electronics and sealed connectors for maximum durability * Easily programmable through a Mini-USB communication port * Programmable max rev and launch RPM limiters provide engine protection * Consistent holeshots thanks to programmable launch timing retard * Single timing step retard ideal for pulling timing for nitrous applications * On-board data acquisition
( 5 )
$1,749.95
—
$1,999.95
$1,573.95
—
$1,798.95
On Sale
Cold Case offers radiator support module kits for a variety of applications, including 1960s era Camaro LS engine swaps. Each module comes fully assembled and ready to bolt into your vehicle. They consist of an aluminum radiator support, big 1.25 in. tube dual-core crossflow radiator, two 3600 cfm fans/shroud combination, billet cap, and billet overflow tank. These units are very popular with high-tech, high horsepower builds in which maximum cooling is a must. Available in either standard Chevrolet outlet configurations or LS outlet configurations, they're 100 percent TIG-welded and ready to paint or polish. Radiator support module features: * Extra forward design will clear big block and LS front drives * Brushed aluminum finish * 2 row design with 1.25" tubes * Includes dual 14 in. 3600 cfm fans and shroud combination setup * Easy to install even in finished cars * Optional AC condenser and electronic fan controller upgrades available
( 5 )
$2,299.54
$2,199.54
On Sale
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,801.99
—
$1,802.99
$1,621.79
—
$1,622.69
On Sale
APR DTR6054 turbocharger systems are direct replacements for the EA888 Gen 3 engine. These upgrades include matching software for various vehicles and mods, providing up to 491 hp and 425 lbs.-ft. of torque, depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the Golf R, S3, and TT S platform with fueling upgrades. For dedicated race cars the turbocharger is designed with plenty of headroom to go even further on your own! Designed and developed from the ground up by APR, DTR6054 turbochargers do not require a core and there's no additional downtime. They are built using an aluminum anti-surge compressor cover with appropriate A/R matched to a larger aircraft-grade, 6061 billet aluminum 60mm compressor wheel, a turbine housing cast with high-temperature 310 stainless steel to take the heat and abuse seen on a road course, and a nickel-based superalloy K418 high-flow 54mm turbine wheel. A German dual ceramic ball bearing center section provides smooth and reliable operation with a better transient response, eliminating the factory failure-prone journal bearing design. Each kit includes the complete turbocharger with compressor inlet pipe, compressor outlet hose, T-bolt clamps, gaskets, O-rings, exhaust ring, exhaust V-band, exhaust manifold gasket, studs, bolts, and washers, oil and coolant line O-rings, and APR's ECU upgrades for select vehicles. The upgrade uses your factory electronic wastegate and diverter valve, and connects to your factory exhaust, intake, turbo outlet pipe, and oil and coolant lines. Tested at various road courses, APR's DTR6054 turbocharger systems do not spike torque hard or run on the edge of what the factory rods and pistons have been known to handle, making them as safe on the stock engine as possible for these power levels. Additional features: * Over 30 percent compressor flow compared to the factory turbocharger * Various software levels depending on fueling modifications, including stock fueling * Supports 91, 93, 100, and 104 AKI in all configurations * Supports E60-E85 with fueling upgrades (Golf R/S3/TT S platform only) * VSR balanced turbocharger center housing rotating assembly (CHRA) for reliable operation * Oversized cast turbo inlet pipe connects directly to factory or upgraded intake system * Machined turbocharger speed sensor port with included billet block-off plug * Silicone discharge hose with APR EZ-flow stepped lips included (no turbo muffler) * Integrated diverter valve (DV) port * Available in turbo kit only, turbo kit with low- and high-pressure fuel pump, or turbo kit with low- and high-pressure fuel pump and multi-port injection
Not Yet Reviewed
$2,099.95
$1,888.95
On Sale
Stainless Works Redline Performance Connect exhaust systems with H-pipes deliver improved sound and performance for your new Mustang muscle car. SW has engineered drone-free aggressive mufflers tuned specifically for the improved Coyote engine from Ford. The systems are built from corrosion-resistant 304 stainless steel and TIG-welded in their state-of-the-art facility. Stainless Works Redline Performance Connect exhaust systems with H-pipes are available for systems with or without active exhaust valves. Their in-house engineered valve bolts directly to the factory electronics to allow for all exhaust modes, from the closed valve "quiet" mode, to the chambered "normal" mode, and to the wide open straight-through design on "track" mode. Stainless Works Redline H-pipe systems feature: * Redline System—their most aggressive sound * Performance Connect for a full 3 in. exhaust (to SW headers/exhaust) * 3 in. mandrel-bent tubing offers improved flow over stock exhaust * H-pipe crossover * Tuned mufflers for aggressive muscle car sound * Quad polished tips * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$2,576.40
$2,169.60
On Sale
Stainless Works Redline Performance Connect exhaust systems with X-pipes deliver improved sound and performance for your new Mustang muscle car. SW has engineered drone-free aggressive mufflers tuned specifically for the improved Coyote engine from Ford. The systems are built from corrosion-resistant 304 stainless steel and TIG-welded in their state-of-the-art facility. Stainless Works Redline Performance Connect exhaust systems with X-pipes are available for systems with or without active exhaust valves. Their in-house engineered valve bolts directly to the factory electronics to allow for all exhaust modes, from the closed valve "quiet" mode, to the chambered "normal" mode, and to the wide open straight-through design on "track" mode. Stainless Works Redline X-pipe systems feature: * Redline System—their most aggressive sound * Performance Connect for a full 3 in. exhaust (to SW headers/exhaust) * 3 in. mandrel-bent tubing offers improved flow over stock exhaust * X-pipe crossover * Tuned mufflers for aggressive muscle car sound * Quad polished tips * Slash-cut double-wall style * Excellent fitment for easy installation * 304 stainless steel * TIG-welded for beauty and strength * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$2,196.40
—
$2,576.40
$1,849.60
—
$2,169.60
On Sale
Brembo's Prime UV coated composite rotors are developed as direct replacements that meet or exceed OEM specifications. Environmentally friendly, the solvent-free UV Coating offers superior protection of the disc, including braking plate surfaces. The cast iron braking surface and the aluminum or steel hub minimize weight while retaining high heat strength-- all without sacrificing maximum performance and driving comfort. Included with the UV coated rotors is a fixing screw kit if necessary for simple and worry-free installation. A new intelligent marking location shows part number and the minimum thickness. In order to optimize and restore braking performance, rotors and pads should be replaced together. Pair your UV coated composite rotors with Brembo's NAO/Ceramic or Low Met brake pad formulations. Additional details: * Braking surface is machined to OEM specifications for synergy between rotor and friction material during run-in period * Brembo uses electronic balancing system during production to achieve balanced weight distribution * Modern calculation and simulation systems are applied in designing brake rotors to ensure peak performance * UV coating technology guarantees full rotor protection and maximum corrosion resistance * Patented PVT ventilation for improved cooling capacity and resistance to thermal cracks (depending on application) * No health-threatening compounds; guaranteed high resistance to chemical agents * Available for a wide selection of domestic and import applications
( 2 )
$1,953.57
$1,758.21
On Sale
FiTech Go Port EFI standalone system Force Fuel/Go-Spark fuel injection master kits combine a high-flow (850 cfm) FiTech throttle body with an integrated ECU, plus a fuel delivery system that makes converting your carbureted engine to EFI easier. The Go Port EFI standalone system supplies everything needed to adapt your intake and fuel rails--sensors, harness, gaskets, and a hand-held touch screen controller. Along with that will be FiTech's Go Fuel Force Fuel system. If you think electronic fuel ejection is too complex or expensive to achieve, FiTech will change your mind. FiTech Go Fuel Force Fuel system supports the demands of an 800 hp engine on gas. It is easy to mount, and a serviceable 10-micron fuel filter is supplied to ensure clean fuel reaches the injectors. The reservoir holds a 1/2 gallon of fuel to submerge an internal electric fuel pump, keeping it cool with no chance of fuel starvation. An internal regulator keeps the pressure at a consistent 58 psi, ideal for reliable EFI performance, and the Force Fuel system also includes 5 ft. of high-pressure fuel hose, fittings, return line fitting bung, and a liquid-filled gauge.
Not Yet Reviewed
$1,770.99
$1,593.89
On Sale
aFe Gemini XV Series exhaust systems produce power gains, aggressive sound, and awesome style. These cat-back systems are built from 3 in. mandrel-bent 304 stainless steel tubing and feature an electronically controlled exhaust cutout valve to quickly switch between mild and aggressive tones at the push of a button. Utilizing state-of-the-art computer-aided design technology, Gemini XV systems are designed for custom, high-tolerance factory fitment. They utilize factory-style hangers for a secure fit and hassle-free installation, and their construction offers race-proven strength and durability. aFe Gemini XV exhaust systems include two key fob remotes, control module, valve motor, and all necessary wiring. Additional features include: * Dual black or polished 304 stainless steel clamp-on exhaust tips * Tips feature an aFe POWER logo plate riveted on for a unique style * High-flow stainless steel muffler (finish may vary) * 100 percent MIG-welded for race-proven strength and durability * All necessary hardware is included
Not Yet Reviewed
$1,766.10
—
$2,238.60
$1,589.49
—
$2,014.74
On Sale
For cars with an identity crisis (they don't know if they're a street car or a race car), XFI Sportsman electronic fuel injection systems fill a hole in the middle of the FAST lineup. They're designed to satisfy the enthusiast who does spend some time racing, but also spends time cruising. These EFI engine control systems will serve to simplify the tuning process and give you the capability to control the engine with greater control and precision than currently exists. When we say simple, we mean really simple--installation is a snap, and if you've ever worked with tuning software in the past, XFI's C-Com software will be familiar to you. If not, then you can use the self-tuning option and be off to the races as you learn the capabilities of your new system. The FAST systems ship with an ECU, wiring harnesses, wideband oxygen sensor, and electronic fuel pressure kit.
( 5 )
$1,712.95
$1,541.66
On Sale
Dinan Big Turbos are the ultimate upgrades for racing enthusiasts to fully maximize the power output of your engine. The compressor wheel inside the turbocharger is increased in size enabling additional boost pressures, and thus increased horsepower at higher engine speeds--all while retaining efficiency. These are with an upgraded thrust system to ensure reliable and prolonged life. They are available as brand new units with a new stock turbine custom cast and manufactured, or as rebuilt factory units machined to Dinan specifications. Both come with an upgraded thrust system to ensure reliable, prolonged life. Dinan Big Turbos feature: * Larger billet compressor/impeller wheel that allows 30 percent greater flow over stock which then enables additional boost to be realized while retaining efficiency. * Dinan Installation instructions detail a procedure which is quicker than BMW's turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only). * Includes O-rings and gaskets needed for complete installation on a RWD vehicle only.
Not Yet Reviewed
$1,799.95
$1,618.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
