Availability
Showing In Stock Items. Show All 88 Items.
On Sale
FUELAB Titanium fuel cell quick-service surge tanks (QSST) come base as a "bare" unit without a lift pump and with an empty fuel pump hanger in the surge tank. (FUELLAB has options to add three different lift pumps, five different surge pumps, remote fuel fill, fuel level sensor, and a fuel tank vent kit.) Quick-service surge tanks are compatible with both brushed or brushless lift and surge pump options. Product features: * Quick Service Surge Tank for fast pump service * Provides protection against fuel slosh from standard fuel cell pump hangers * Fits the industry standard 24-bolt fill plate bolt pattern * Gasoline, Ethanol (E85), and Methanol compatible * Rollover flap protection * Fuel tank vent with rollover protection * Gaskets and hardware included * Stock with empty fill neck hole to give you options * WHAT MAKES THE FUELAB QSST BETTER? FUELAB's Quick Service Surge Tank is exactly that. You can service your Surge Tank Pumps in minutes. With only 10 bolts on top, you can pull the Surge Tank Pump Hanger out of the top of the cell and service your pumps quickly! Whereas most competitors require you to pull the entire 24 bolt plate, then remove the surge tank housing from the bottom to finally access your pumps. FUELAB units are compatible with Brushed and Brushless pumps for both the Lift Pump and the Surge Tank Pump(s), or a combination of the two using the same Base Plate. Base plates come standard in two enticing anodized colors, Titanium and Gold. Kit includes: * FUELAB QSST base plate and surge tank * Fuel tank vent with rollover protection * Lift pump hanger with pump mount * 3-Terminal for option of brushed or brushless lift pump * Fuel level sender block-off plate and gasket * Open fuel filler hole for customization (gasket included) * Empty dual pump fuel surge tank hanger (fits brushed or brushless pumps) * Corrugated fuel hose for lift pump into surge tank * 1/4 in.-28 hardware to mount to most fuel cell nut rings (NOTE: Don't forget to add on your FUELAB Fuel Filler Kit, Fuel Level Sender, and Fuel Cell Vent Kit!)
Not Yet Reviewed
$1,925.00
$1,732.50
On Sale
Does your engine seem like it's always out of breath? Give it a new lease on life and gain some horsepower with Holley high--flow EFI throttle bodies. Made from CNC billet aluminum, they're designed to use the stock TPS and IAC to simplify installation. They include all vacuum ports and linkage required for installation.
( 1 )
$1,749.95
$1,573.95
On Sale
FiTech Go Port EFI complete fuel injection systems are offered in two kits, one for up to 550 hp and one for up to 1,050 hp. Each system is supplied with a new aluminum intake machined and fitted with injectors (36 or 80 lb.), fuel rails, wiring harness, and an 850 cfm throttle body. The ECU, with its high-speed processor, is integral to the throttle body along with the TPS, IAC, IAT and MAP sensors reducing wiring and making installation as easy as possible. All setup is handled through the color touch screen monitor with no tuning experience necessary to have your engine ¬rev up and running at its best. Choose the system designed for your engine.
( 3 )
$2,064.00
$1,857.60
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 17 )
$1,749.95
—
$1,999.95
$1,573.95
—
$1,798.95
On Sale
Holley Sniper 2 EFI Inline Pump Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters for before and after the pump, fittings and hardware, cushioned mounting brackets, and an external, inline pump * Can be used with 3/8 in. factory sending units or add a dedicated bulkhead fitting * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 24 )
$1,749.95
—
$1,899.95
$1,573.95
—
$1,708.95
On Sale
Holley Super Sniper EFI Stealth 4150 fuel injection systems are what you need to convert your vehicle to fuel injection. Holley Super Sniper Stealth 4150 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Compatible with draw-through or blow-through forced induction applications * 2 Bar MAP sensor * Integrated ignition timing control * -6AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0-5 V sensors, one sensor ground supply for 0-5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-886 is recommended * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit for 2.250 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
( 4 )
$2,099.95
$1,888.95
On Sale
Holley Sniper EFI Stealth 4150 fuel injection systems feature four 100 lb.-hr. fuel injectors capable of supporting up to 650 hp naturally aspirated. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control--improving idle stability, drivability, and wide-open throttle horsepower! These systems also include transmission kickdown provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications. The 4150 is available individually or in a complete Master Kit (see contents listed below). ALL Sniper EFI Stealth 4150 systems feature: * Bolt-on 4150 flange carburetor replacement * Throttle body mounted ECU; no extra boxes to mount * Supports up to 650 hp with four 100 lb.-hr. injectors * All of the wiring exits below the rear fuel injector cover—for a completely stealth installation * Timed spark part for vacuum advanced distributors located under the front fuel bowl—for easy access to the distributor * Air entry is machined to fit most stock-style air cleaners with air cleaner locator provisions * Only four wiring connections required (battery +, battery -, switched ignition, and RPM) * External fuel pressure regulator required, set to a base pressure of 58.5 psi, such as 12-886 * Integrated ignition timing control * High-resolution full-color touch screen for initial setup, tuning, and gauge displays * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own); NO laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learn * OEM-style TPS/IAC and fuel pressure regulator, for years of dependable service * Included clamp-on oxygen sensor kit for 2.25 in. exhaust ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange * Available in three finishes: shiny, ceramic black, and classic gold MASTER KITS also include complete fuel system with an external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank.
( 41 )
$1,749.95
—
$1,799.95
$1,573.95
—
$1,618.95
On Sale
Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit
Not Yet Reviewed
$1,999.00
$1,699.15
On Sale
Holley Sniper EFI Quadrajet self-tuning fuel injection systems are ideal replacements when you're tired of rebuilding the 50-plus-year-old Rochester Quadrajet (Q-jet) on your classic ride. They're the first bolt-on, spread-bore, EFI throttle-body systems not requiring any additional adapters, sealing plates, or intake manifold swaps. They retain the same great features as the 4150 Sniper EFI version (four 100 lbs.-hr. injectors; built-in timing control; high resolution 3.5 in. full color touchscreen; etc.). Their throttle body will support naturally aspirated power up to 500 hp. In addition, they offer multiple fuel inlet configurations that allow for a stock-appearing installation and fit most stock air cleaners. Modernize your Q-jet-powered classic vehicle with a Holley Sniper EFI Quadrajet self-tuning fuel injection system. They are offered individually or in Master kits with external fuel pressure regulator preset to 58.5 psi, 20 ft. of 3/8 in. Vapor Guard fuel hose, fuel pump, filters, necessary hardware, and bulkhead fitting to return fuel into the tank. Features, items, and specs: * Designed to deliver the signature "Rochester Roar" at wide-open throttle! * Throttle body-mounted ECU–no extra boxes to mount * Only 4 wiring connections required (battery positive and negative, switched ignition, and rpm) * Transmission provisions on throttle lever for TH350/TH400 and 200R4/700R4 * Universal throttle and transmission kick-down bracket * Brake booster adapter (if required) * Simple calibration wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own—no laptop required) * Internal fuel pressure regulator preset to 58.5 psi * 20 ft. of 3/8 in. Vapor Guard fuel hose * Fuel pump and filters * Necessary hardware and bulkhead fitting to return fuel to the tank * Genuine Bosch LSU 4.9 wide-band oxygen sensor provides real-time fuel map learning * OEM-style throttle position sensor (TPS) and idle air control (IAC) for years of dependable service * Clamp-on oxygen sensor kit ensures leak-free oxygen sensor installation with stainless steel T-bolt clamps and weld-ready oxygen sensor flange * United States Coast Guard approved (certified to ISO 8846, SAE J1171 requirements) * Available in three finishes--Classic Gold, Shiny, and Black Ceramic
( 7 )
$1,949.95
$1,753.95
On Sale
Holley Sniper EFI Stealth 4500 fuel injection systems are what you need to convert your dragster or Pro-street vehicle to fuel injection. For engines producing 800+ hp, the Sniper Stealth 4500 systems feature eight 100 lbs./hr. injectors and a throttle body that flows a massive 1,440 cfm. These Holley systems come with a USB to CAN tuning cable and free downloadable Sniper EFI software to give you unlimited control of your engine. Holley Sniper Stealth 4500 systems will also look great under the hood in your choice of shiny, ceramic black, and classic gold finishes. Features and benefits include: * Supports up to 1,500 hp naturally aspirated or 1,250 hp forced induction with eight 100 lbs./hr. injectors * Compatible with draw-through or blow-through forced induction applications * 2.125 in. throttle plates, flow 1,440 cfm for large cubic inch engines * 2.5Bar MAP sensor * Integrated ignition timing control * Programmable launch control via 2-step and timing retard. Both can be triggered by a trans-brake input * Gen 3 Ultra Dominator-style 4-bolt air cleaner flange * -8AN fuel inlets * High-resolution full color touchscreen for initial setup, tuning, and gauge displays * Simple calibration wizard--answer a few questions about your engine and it creates the base map, then starts tuning on its own! No laptop required * Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI * The included genuine Bosch LSU 4.9 wideband oxygen sensor provides real time Fuel Map Learn * Built-in single-stage wet or dry progressive nitrous control * Three programmable 0-5 V sensor inputs for oil/fuel/dome or nitrous pressure or other critical information * Six programmable ground outputs, five programmable ground inputs. These can be used to trigger or control external devices, such as nitrous solenoids and boost control solenoids. Or to provide the ECU with an input to turn on function, such as an ignition timing * One +5 V reference output, +5 V power supply for 0 to 5 V sensors, one sensor ground supply for 0 to 5 V sensors * Throttle body mounted ECU--no extra boxes to mount * Only 4 wiring connections required--battery +, battery -, switched ignition, and rpm * Required external fuel pressure regulator, 12-848 is recommended * Customizable secondary fuel pump output (TPS, rpm, or boost enabled) * User-friendly boost control with handheld adjustability * Free software included--comprehensive data logging tool to help you maximize the performance of your engine * Real-time data logging to the included 3.5 in. touch screen allows you to save information to the SD card without needing a communication cable * Programmable target air fuel ratios per boost level * Advanced boost control available via free Sniper EFI tuning software, including boost vs. rpm and boost vs. time * OEM-style TPS/IAC, for years of dependable service * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with stainless steel T-bolt clamps and a stainless steel (weldable) oxygen sensor flange
( 4 )
$2,149.95
$1,933.95
On Sale
FiTech has some of the best-engineered and priced throttle body systems on the market. Their LS EFI 500HP fuel injection systems bring incredible ingenuity to the market. FiTech fabricated many aluminum parts for these systems, including the low-profile 92mm billet throttle body, high-volume billet fuel rails, and an intake manifold with 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mates 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touchscreen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. A suction cup mounting bracket puts the controllers at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. FiTech LS EFI 500HP fuel injection systems with transmission controller provide impressive power and performance, while allowing you to save a little green for your next tires. Additional features: * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touchscreen hand-held controller with data log features
( 41 )
$1,997.99
—
$2,283.99
$1,598.39
—
$1,827.19
On Sale
FiTech Ultimate LS EFI 500 hp fuel injection systems with Go Fuel in-tank module combines incredible engineering and construction for top-of-the-line performance. FiTech fabricated many billet aluminum parts for their Ultimate LS EFI 500 hp systems, including a 92mm throttle body, high-volume fuel rails, and a 1,500 to 6,500 rpm powerband intake manifold. They combine sequential spark and fuel control with 36 lbs./hr. injectors, a plug-and-play wiring harness, and a color touch screen self-learning ECU. This allows for programing two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on the fly. The Go Fuel in-tank module universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. Whether you're starting with a 5.3 junkyard dog or a crate motor, FiTech Ultimate LS EFI 500 hp systems with Go Fuel in-tank module will look and run exceptionally. Additional Ultimate LS features: * Optional GM transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Bosch wideband-controlled * Stainless oxygen sensor bung * Compatible with car and truck coils * AN fittings and fuel crossover * Works with custom cams * Designed for applications making at least 6 in. of vacuum at idle * 24X and 58X crank and cam compatible * Programmable touch screen hand-held controller with data log features * Suction cup mounting bracket
( 1 )
$2,375.99
$1,900.79
On Sale
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$1,849.95
—
$2,099.95
$1,663.95
—
$1,888.95
On Sale
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$1,949.95
—
$2,199.95
$1,753.95
—
$1,978.95
On Sale
FiTech Go EFI 2x4 Power Adder 1200 hp fuel injection systems are for the guys who have 671 and 871 roots superchargers or make up to 1200 hp naturally aspirated on their dual-quad setup. These easy self-tuning systems work out of the box on your 2x4 blower plate as an inline setup or can be side mounted using custom linkages. Also, the kits are a bolt-on for the most popular normally aspirated dual-quad and tunnel ram manifolds, including the Edelbrock line of dual-quad manifolds, without any adapters! They fit and look like they belong there because they were designed to fit from the start. One throttle body handles all of the brains, while the second holds four additional injectors. These can also be used in cross ram and tunnel ram configurations. Application notes: Chevrolet, Pontiac, Ford, Chrysler, Dodge, Plymouth, etc. engines making 250 hp up to 1200 hp with a dual quad intake manifold. Replacement for any dual-quad carburetors for engines with 250 hp up to 1200 hp. Use the same size air cleaner you would normally use for your dual-quad carburetors. Product features: * 2.5 BAR internal MAP sensor * Suitable for up to 1200 hp * (8) Flow matched injectors * (2) Fan control * Blower and turbo ready * Support for nitrous * Boost and nitrous timing * Ignition timing control * Built-in pressure regulator * Air/fuel ratio tuning * Pro-tuning laptop software * Bright aluminum or matte black finish * NOTE: Some models include Go Spark CDI box Kit contents: (2) Diecast throttle body (1) Oxygen bung kit (1) Hand-held controller (1) CTS sensor (1) Hand-held controller cable (1) CTS adapter (1) Windshield mount (1) Mini USB cable (1) 4+2-Pin Connector (2) Return plug (1) Oxygen sensor (1) Gasket kit
( 11 )
$2,236.00
—
$2,347.99
$1,900.60
—
$1,995.79
On Sale
LS motors have a great base for power, but what they really need is something wicked to wake them up. FiTech LS EFI 750 HP fuel injection systems have alarming power, exciting style, and will take you and your vehicle to the edge. FiTech fabricated many aluminum parts for these systems, including the low-profile 102mm billet throttle body, high-volume billet fuel rails, and an intake manifold with a 1,500 to 6,500 rpm powerband and 3mm construction. Sequential spark and fuel control mate the 55 lbs./hr. injectors, plug-and-play wiring harness, and color touch screen self-learning ECU. This allows you to program two fan control outputs, most tach and speedometer output drivers, and target AFR and timing on-the-fly. A suction cup mounting bracket puts the controller at your fingertips and allows for impressive visual aids. The optional transmission control feature is suitable for 4L60, 4L65, 4L70, or 4L80 GM transmissions. Awaken the beast and feed its needs with an ultra-performing FiTech LS EFI 750 HP fuel injection system with transmission controller. Additional features: * Programmable touch screen hand-held controller with data log features * 3-bar MAP sensor automatically detects up to 30 psi boost * AN fittings and fuel crossover * 24X and 58X crank and cam-compatible and works with custom cams * Black anodized aluminum parts for style and corrosion resistance * High-flow, cable-operated throttle body * Dual Bosch wideband with dual trim controlled * Knock sensor control * Stainless oxygen sensor bung * Compatible with car and truck coils * Designed for applications making at least 6 inches of vacuum at idle
( 20 )
$2,410.00
$1,928.00
On Sale
Holley Sniper 2 EFI Returnless Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, filters before/after the pump, fittings/hardware, and a low profile returnless drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Pre-set, internally regulated pump only requires a single feed line to the Sniper 2 unit * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
( 2 )
$1,849.95
—
$2,099.95
$1,663.95
—
$1,888.95
On Sale
FiTech Go EFI 2x4 625 hp fuel injection systems will let everyone know you mean business with a pair or 4-barrels crowned atop your engine. Each system is supplied with two throttle bodies, one with the brains and integral ECU and the other with the brawn. Both feature four injectors and will support up to 625 hp (naturally aspirated). Thanks to a multi-bolt pattern, the 2x4 system will bolt onto most intakes, including tunnel rams or cross rams. Through the advanced tuning capabilities of the efficient ECU, you'll have your engine revved up, idling smooth, and making big power in no time. FiTech Go EFI 2x4 625 hp fuel injection systems are available with a bright aluminum or matte black finish, with or without FiTech's Go-Spark CD ignition to deliver high powered sparks, improving combustion and power output of your engine. Each FiTech Go EFI 2x4 is supplied with two throttle bodies, handheld touch screen controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty info. Choose your preferred setup and finish.
( 10 )
$1,916.00
—
$2,030.99
$1,628.60
—
$1,726.34
On Sale
Holley Sniper 2 EFI Return-Type Fuel Injection Systems are self-tuning, easy-to-install, EFI conversions for 4-barrel (4150 flange) style carburetors. They took everything that they learned from the original Sniper EFI system and added new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple user interfaces/dash displays, and more. New for Sniper 2 is the Power Distribution Module (PDM). This cost-effective and optional accessory isolates the core of your EFI and ignition wiring into one, easy-to-use location. Simply slide the stripped wire ends under the positive lock connector and tighten down the set screw. Battery and a switched 12 V source is all that's required to power the PDM and your Sniper EFI. Make your classic drive like a modern fuel-injected vehicle, with easy cold starts, smooth drivability, and improved fuel economy! Sniper 2 is designed to be installed at home in your garage with limited tools and the support of Holley's comprehensive installation manual and videos. The user-friendly setup wizard allows you to answer a few simple questions about your engine—and the system will begin self-tuning with no laptop or tuning required. If you're looking for a high-performance fuel injection system that delivers power, efficiency, and ease of use, look no further than the Sniper 2 EFI. Main features: * Only 4 wiring connections required: Battery+, Battery-, Switched Ignition, and RPM * Includes 20 feet of 3/8 in. vapor guard fuel hose, return line, external regulator, filters before/after the pump, fittings/hardware, and a low profile return-type drop-in pump module(1.275-inches above the tank mounting surface) that is designed for universal installation into fuel tanks that range from 7 to 12 in. deep * Innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and can be rotated 360 degrees for easier clocking. * Main harness includes plug-and-play HyperSpark distributor support for integrated timing control, making your ignition setup hassle-free * Wide variety of tuning and gauge display options: from a 3.5 in. full-color LCD hand-held, 5 in. digital dash, or the Bluetooth dongle, which allows you to connect either an iOS or Android based cell phone to your Sniper 2 * Female -6 AN O-ring fittings * Overall height is only 3.280 in. * Supports up to 650 hp naturally aspirated or 575 hp on boost with four 100 lbs.-hr. injectors * Requires 55-65 PSI * Next generation ECU features improved RF noise and interference resistance (stands up to old car wiring, noisy alternators, faulty plug wires) * Redesigned throttle shaft and plate geometry for a smoother throttle feel * Integrated transmission kickdown provisions for GM TH350/400, 200-4R/700R4 and Ford C4/C6 applications * "Hidden Harness" wiring exit from the rear of throttle body for a clean appearance * Inputs and outputs consist of: 2x ground inputs, 2x ground outputs, 1x TPS output (0-5 V), and 1x tach output * Redesigned injector connector for improved reliability * Onboard contactless magnetic TPS sensor ensures an accurate TPS reading * Next generation mil-spec style M8 positive lock connector for CAN1 and CAN2 provides the latest in CAN bus technology for a simple yet robust connection * Cast-in fuel crossover from the primary to secondary fuel rail * The included Bosch LSU 4.9 wideband oxygen sensor provides real-time fuel map learning * Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor install with stainless steel T-bolt clamps and a stainless steel weldable oxygen sensor flange * Sniper 2 throttle bodies are serialized, which provides an improved experience in the event of any unit needing to be inspected
Not Yet Reviewed
$1,949.95
—
$2,199.95
$1,753.95
—
$1,978.95
On Sale
APR intercooler systems result in repeatable performance—even in the most demanding of situations. These massive front-mounted upgrades dramatically reduce intake air temperature (IAT), minimize heat soak, and provide increased performance in easy-to-install, direct bolt-on designs. The superior effectiveness and performance of APR systems is focused around core selection, end tank design, and specific install location for each application. Balancing all the necessary characteristics, APR's engineers perfected units with exceptional cooling and lowered pressure loss across the core, while maintaining critical airflow to components behind the system—delivering maximum performance and far exceeding the capabilities of factory intercoolers. Features may include: * Aluminum construction * Large bar-and-plate design with densely packed staggered and louvered fins * Smooth cast aluminum end tanks engineered for low turbulence/restriction and maximum flow * Pressure tested to prevent power robbing boost leaks * Full directions and APR world-renowned customer support * Some systems may include CNC-bent and TIG-welded mounting brackets, high-quality multi-ply silicone inlet and outlet hoses, T-bolt clamps, and billet MAP sensor housings
Not Yet Reviewed
$2,199.95
$1,978.95
On Sale
FiTech Go EFI 3x2 Tri Power 600 hp fuel injection systems with external ECU sticks to basic functions that deliver the best possible performance and economy for your street and mild performance engine. These FiTech ready-to-run throttle body systems allow you to remove your carburetor and advance into the EFI world at an affordable price. The Tri-Power 600 hp systems come complete with a classic gold diecast aluminum throttle body, hand-held controller, windshield mount, wideband oxygen sensor, coolant temperature sensor, and a compact external ECU. Systems are available with or without FiTech's Go-Spark CD ignition. Features: * Annular discharge * Supports up to 600 hp engines * Three high-flow throttle bodies, each with two 45mm throttle bores * Clearly marked OE-style harness * All sensors are integrated on the unit (except for wideband oxygen and coolant temperature sensors) * Fits intake manifolds with three 2-barrel flanges * Works with OE carb-type distributor and throttle linkage * Compatible with E-85 gasoline * Fuel pump voltage control * Wet Flow Technology with swirl spray annular discharge design * Optimize Air Fuel Ratios while driving
( 3 )
$2,410.00
$1,928.00
On Sale
FiTech Retro LS EFI 650 hp fuel injection systems offer a "golden" opportunity for impressive looks and performance. These classic gold engine-toppers with transmission control are complete throttle body kits, suitable for everything from your junkyard 5.3 to a Stroker 427—and they deliver old-school carburetor looks with EFI technology and reliability. Whether a do-it-yourself hot rodder or professional EFI tuner, the features of the FiTech Retro LS EFI 600 hp system are sure to inspire you. FitTech Retro LS complete self-tuning induction kits include: * Classic gold die-cast throttle body * Hand-held controller * Windshield mount * Wideband oxygen sensor * Coolant temperature sensor * Self-learning ECU Features and benefits: * Wet flow technology and swirl spray annular discharge for complete atomization * Windshield-mount for control * Flow-matched 80 lb. injectors * Self-learning ECU with touchscreen controller for easy setup and configuration * Semi-sequential fuel and full spark control * Bosch wideband controlled (self-learning) * 24X and 58X crank and cam compatible * 1 BAR MAP sensor—TPS-IAC sensor * Speedometer Output Driver for most speedometers * On-the-fly programmable target air/fuel ratios and timing * Custom camshaft-friendly * Knock sensor control * Available transmission control feature is suitable for 4L60, 4L65, or 4L80 GM transmissions * Compatible with E-85 and gasoline * All Go-EFI's feature voltage control fuel pump control. This feature reduces the voltage to the pump under low-load conditions such as idle and cruise, thus reducing noise and heat. This will extend the life of your pump and keep the fuel in the tank cooler and your ears from ringing.
( 1 )
$1,834.00
$1,650.60
On Sale
FiTech Ultimate Rebel LS 500 hp EFI fuel injection systems are available with or without a transmission control. These cutting-edge fuel injection solutions combine high performance with a sleek and refined design. Building upon the success of the renowned FiTech Ultimate LS EFI system, the Rebel LS takes innovation a step further with its distinctive cleaner profile and enhanced features, making it the ultimate choice for modern engine conversions. Designed for enthusiasts seeking both power and aesthetics, the Ultimate Rebel LS EFI system redefines the look and performance of your LS-powered vehicle. The standout feature of the Rebel LS system is its sleek and streamlined appearance, which seamlessly integrates with the engine bay, providing a cleaner and more polished aesthetic. The redesigned fuel rail bracket adds to the visual appeal, offering a fresh and modern touch that complements any engine setup. Beneath its striking exterior, the Ultimate Rebel LS EFI system boasts the same advanced technology that FiTech is known for. Experience exceptional fuel delivery and engine control, optimizing your vehicle's performance and efficiency. These systems are tailored to LS engine conversions, ensuring a hassle-free installation process while delivering consistent and reliable results. Key features include: * Cleaner profile: The Ultimate Rebel LS EFI system is engineered with a refined design that seamlessly integrates into your engine bay, elevating the visual appeal of your vehicle * Thicker gauge manifold provides quieter injection * Redesigned fuel rail bracket: The innovative fuel rail bracket design not only enhances the appearance but also adds a touch of sophistication to your engine compartment * Advanced fuel injection technology: Benefit from FiTech's cutting-edge fuel injection technology, ensuring precise fuel delivery and optimized engine performance * Effortless installation: Designed specifically for LS engine conversions, the Rebel LS system offers a user-friendly installation process that minimizes downtime * Optimized performance: Unlock the full potential of your LS-powered vehicle with improved throttle response, increased horsepower, and better fuel efficiency * The most complete kit on the market; includes manifold, ECU, sensors, throttle body, harness, fuel rails, fuel pressure regulator, throttle cable brackets, and more * Boost/Nitrous compatibility: Equipped with 3 Bar MAP sensor (27 psi) * E85 compatible Kit contents: (1) Rebel LS1, LS2, LS6 low-profile intake manifold with MAP and IAT port (1) Ultimate LS 92mm throttle body with sensors (8) 36 LB injectors (1) LS ECU (1) LS1 fuel rail kit (1) Primary LS harness (2) EV1 injector sub harness (1) Oxygen sensor extension sub harness (1) 3 Bar MAP sensor (1) IAT sensor (1) LS1/LS2 knock sensor harness (1) Go EFI clamp-on oxygen sensor bung kit (1) Handheld monitor for ultimate LS (1) FiTech hand-held cable (1) FiTech USB to USB C cable (2) FiTech oxygen sensors (1) Premium magnetic handheld mount (1) Rebel intake throttle cable bracket with round hole (1) Rebel intake throttle cable bracket with stock GM cable notch (1) Go Fuel tight fit regulator with pressure gauge
Not Yet Reviewed
$1,900.00
—
$2,390.00
$1,520.00
—
$1,912.00
On Sale
FiTech Go EFI 2x4 625 hp system fuel injection master kits are inclusive EFI kits with fuel delivery solutions. In these master kits, FiTech mates their 2x4 TBIs with either a Go Fuel in-tank or fuel cell pump module, or Go EFI in-line pump kit to provide everything needed to convert your carbureted vehicle to EFI. The throttle bodies are offered in two finishes. Choose the master kit with your preferred finish and fuel delivery solution. Go EFI 2x4 625 hp system lets everyone know you mean business with a pair of 4-barrels crowned atop your engine! The 2x4 is supplied with two throttle bodies, one with the brains and integral ECU, the other with the brawn. Both bodies feature four injectors and will support up to 625 hp (naturally aspirated). The system is supplied with two throttle bodies, handheld controller, cable and windshield mount, throttle body vehicle side harness, WBO2 sensor, bung kit, coolant sensor, gasket, mini USB cable, instructions, and warranty information. Fuel delivery options: * Go Fuel in-tank pump modules are offered in different styles, including regulated versions, and in different flow rates. They include gaskets, terminals, and clamps. * Fuel cell pump modules are offered in two models—single or dual pump. Each style features a billet machined top assembly and an internal regulator to maintain 58 psi. No return line is needed, and the module is machined to fit 12-bolt flange fuel cells or can be installed on any tank with the supplied hardware. * Go EFI in-line pump kits provide a FiTech heavy-duty pump with 40 ft. of high-pressure fuel hose, two fuel filters, including a serviceable 10-micron filter, fittings, mounts, and clamps.
( 4 )
$2,042.99
—
$2,112.99
$1,736.54
—
$1,796.04
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
