Availability
On Sale
Aeromotive 5.0 gpm brushless variable speed gear pumps are engineered from the ground up for winning performance. These efficient pumps utilize a spur gear design, paired with a brushless motor, to deliver 5.0 gpm at 60 psi. Their inline flow-through design features contoured port machining and no shaft seals, while offering low amp draw, excellent heat dissipation, and high-pressure capabilities. The units are True Variable Speed (TVS) controlled, offering the advantage of pump speed control via a 0-5 V analog DC input signal. The Pro-Series TVS controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low demand, decreasing an already low current draw, and, therefore, minimizing the introduction of heat even further. Lots of power needs lots of fuel; Aeromotive 5.0 gpm TVS brushless gear pumps will feed your hungry high performance machine. Order the body style preferred for your application.
( 4 )
$1,884.85
$1,615.99
—
$1,696.36
On Sale
Aeromotive 7.0 gpm brushless variable speed gear pumps deliver ground-shaking performance with advanced technology. Aeromotive took what they learned from their mechanical spur gear pumps and engineered it to work in a compact flow-through design, creating a fuel pump that is able to move more fuel at pressures up to 150 psi without a drop in flow. Aeromotive true variable speed controller offers the advantages of built-in pump speed control via a dedicated 0 to 5 V analog DC input signal. The controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low engine demand and decreasing an already low current draw, therefore minimizing both motor heat and the introduction of environmental via reduced fuel recycling. Features include: * E85 compatible, reduce maximum fwhp by 30 percent * Lighter than the traditional external mount pumps * Reduced current draw at higher, EFI pressures * Extended service life in methanol and ethanol * New integral spur-gear pumping mechanism * 90 psi continuous operating pressure and up to 150 psi peak pressure, base plus boost * Integral, external brushless controller for clean installation, cooler fuel, and enhanced reliability * ORB-12 inlet and ORB-10 outlet ports * Requires straight 12 V DC to 16 V DC power supply * Not compatible with pulse modulated systems or fuel pump speed controllers Supports: * EFI -- Up to 4,800 fwhp on gas--naturally aspirated -- Up to 3,400 fwhp on gas--forced air induction -- Up to 3,360 fwhp on E85--naturally aspirated -- Up to 2,380 fwhp on E85--forced air induction -- Up to 1,680 fwhp on methanol--naturally aspirated -- Up to 1,190 fwhp on methanol--forced air induction * Carbureted -- Up to 5,400 fwhp on gas--naturally aspirated -- Up to 3,800 fwhp on gas--forced air induction -- Up to 3,780 fwhp on E85--naturally aspirated -- Up to 2,400 fwhp on E85--forced air induction -- Up to 1,890 fwhp on methanol--naturally aspirated -- Up to 1,200 fwhp on methanol--forced air induction
( 1 )
$2,152.75
—
$2,320.40
$1,834.30
—
$2,088.36
On Sale
Aeromotive Phantom Trifekta fuel pumps have been designed to extend the patented Phantom technology into the realm of ultra-high horsepower street/strip applications. Equipped with triple 450 lph, E85-friendly Walbro pumps, the new Aeromotive Trifekta supports staged pump control to reduce recycling and improve continuous-duty capability. Simply put, for universal, on-demand fuel delivery and ultra-high horsepower, combined with quiet, continuous-duty capability, there is nothing else on the market quite like the Aeromotive Phantom Trifekta fuel pumps! Additional attributes of Phantom Trifekta fuel pumps: * Includes a custom billet CNC hat with dual ORB-08 outlet ports, ORB-08 return, and triple electrical bulkheads to allow independent pump control * Engineered, high-capacity foam and bladder baffle * Free-flow rate: 119 gph/450 lph (per stage) * New 6 in. billet cap * One inlet size: -8 AN O-ring * Two outlet size: -8 AN O-ring * Fuel type: Gasoline, E85 * Easy installation in virtually any tank from 6 in. to 10 in. deep (no extensive fabrication or welding modifications required to install in-tank)
Not Yet Reviewed
$1,929.40
$1,723.13
On Sale
Aeromotive 3.5 gpm brushless variable speed gear pumps are engineered from the ground up for winning performance. These efficient pumps utilize a spur gear design, paired with a brushless motor, to deliver 3.5 gpm at 60 psi. Their inline flow-through design features contoured port machining and no shaft seals, while offering low amp draw, excellent heat dissipation, and high-pressure capabilities. The units are True Variable Speed (TVS) controlled, offering the advantage of pump speed control via a 0-5 V analog DC input signal. The Pro-Series TVS controller capitalizes on Aeromotive's existing brushless technology by reducing fuel flow during low demand, decreasing an already low current draw, and, therefore, minimizing the introduction of heat even further. Lots of power needs lots of fuel; Aeromotive 3.5 gpm TVS brushless gear pumps will feed your hungry high performance machine. Order the body style preferred for your application.
Not Yet Reviewed
$1,695.45
$1,525.90
On Sale
Aeromotive 5.0 GPM brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 5.0 GPM in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$2,164.40
—
$2,229.15
$1,947.96
—
$2,006.24
On Sale
Aeromotive brushless Stealth fuel pumps provide the Pro-Series fuel pump performance the world has come to trust and depend on—now available with the latest spur-gear pumping mechanism and brushless-motor technology. These brushless spur-gear pumps are able to move more fuel and sustain higher pressures without failure. They provide a direct-fit on all Aeromotive Stealth 6, 15, and 20-gallon fuel cell tanks; and the pumps are submersible for custom, in-tank placement in 10 in. deep fuel tanks or fuel cells. For use in EFI or carburetor applications with correct regulator.
Not Yet Reviewed
$1,818.00
—
$2,040.80
$1,636.20
—
$1,836.72
On Sale
Aeromotive A1000 Stealth fuel tanks help feed your hungry horsepower needs. These powdercoated steel tanks feature a self-contained pump and filter inside their high pumping Stealth A1000. With that you get their innovative baffling/tray system that not only controls slosh but keeps your pickup submerged to feed heavy acceleration, extreme driving, and--even when fuel levels are low--provide consistent performance. Slapping on a bigger fuel pump doesn't mean you'll have all the fuel you need. Aeromotive has the solution to fight starvation--A1000 Stealth fuel tanks.
( 1 )
$1,840.80
$1,656.72
On Sale
Aeromotive 3.5 gpm brushless variable speed in-tank gear pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The 3.5 gpm in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,863.60
—
$2,058.30
$1,677.24
—
$1,852.47
On Sale
Aeromotive offers various brushless A1000 fuel cells, featuring the pump and a 100-micron prefilter which can be mounted anywhere in any vehicle. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
( 1 )
$2,152.75
—
$2,331.00
$1,937.48
—
$2,097.90
On Sale
Aeromotive Phantom 340 Stealth EFI dual rail fuel systems include all the main components (including the highly sought, baffled Phantom 340 fuel pump) required to create a proper return-style EFI fuel system for engines with dual billet fuel rails. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your fuel-injected street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive dual rail Phantom 340 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Ideal for naturally aspirated and blown EFI engines producing 300-700+ flywheel horsepower (street or track) * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket * Phantom 340 fuel pump (18688) * Inline filter – 10-micron (12321) * Filter bracket (12305) * Fuel pressure regulator (13131) * Fuel pump wiring kit (16307) * Y-fitting –AN-06 (15672) * Fitting – AN-08 ORB to AN-06 flare (15605) * Six fittings - AN-06 ORB to AN-06 flare (15606) * Two fittings - AN-10 ORB to AN-06 flare (15609) * Liquid-filled gauge – 0-100 psi (15633) * Must be used with a return style fuel system * Designed for in-tank use only
Not Yet Reviewed
$1,706.60
$1,535.94
On Sale
Aeromotive Phantom direct-fit fuel pumps are drop-in systems engineered for your late model truck. They're available in five pump sizes, from single 340 lph to triple 450 lph. Designed to work with plastic fuel tanks, Phantom Series pumps cover a range of GM truck models spanning decades. The 1999-2004 models used a smaller factory fuel sending unit than the later 2005-17 models. The smaller size unit limits the pump configurations that this tank will accommodate. Aeromotive Phantom direct-fit fuel pump systems are also compatible with different tank depths.
( 2 )
$1,751.70
$1,576.53
On Sale
Aeromotive Phantom 340 Stealth EFI returnless rail fuel systems include all the main components (including the highly sought, baffled Phantom 340 fuel pump) required to create a proper return-style EFI fuel system for engines with OEM-style returnless fuel rails. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your fuel-injected street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive returnless rail Phantom 340 Stealth fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Ideal for naturally aspirated and blown EFI engines producing 300-700+ flywheel horsepower (street or track) * Requires AN-06 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket * Phantom 340 fuel pump (18688) * Inline filter – 10-micron (12321) * Filter bracket (12305) * Fuel pressure regulator (13131) * Fuel pump wiring kit (16307) * Quick-connect fitting – 3/8 in. to AN-08 (15118) * Fitting – AN-08 ORB to AN-06 flare (15605) * Six fittings - AN-06 ORB to AN-06 flare (15606) * Two fittings - AN-10 ORB to AN-06 flare (15609) * Liquid-filled gauge – 0-100 psi (15633) * Must be used with a return style fuel system * Designed for in-tank use only
( 1 )
$1,718.25
$1,546.42
On Sale
Aeromotive Eliminator brushless variable speed in-tank fuel pumps provide multiple mounting options in almost any fuel cell or tank. Designed for the custom tank builder or fabricator, these True Variable Speed (TVS) units offer the advantage of pump speed control via a 0-5 V analog DC input signal. The Eliminator in-tank fuel pump assemblies are constructed for cool and quiet operation. Order the model that's compatible with your application.
Not Yet Reviewed
$1,690.15
$1,521.14
On Sale
Aeromotive drop-in fuel pump assemblies will provide 2011-17 S197 and S550 Mustangs with the fuel they need to own the road or the track. The fuel pumps feature a compact, lightweight design that bolts into the existing fuel tank, making them an easy upgrade to your fuel system. These assemblies are available with a single fuel pump—all the way up to triple high-output fuel pumps. Don't settle for lesser quality equipment; feed your engine with an Aeromotive electric in-tank drop-in fuel pump assembly.
Not Yet Reviewed
$2,063.60
$1,857.24
On Sale
Now you can get more performance from your diesel with Aeromotive diesel lift pump kits! They're built with features you'll appreciate, such as: Precise pressure control via the Aeromotive convoluted diaphragm regulator; a fuel pressure gauge for accurate system pressure monitoring; a built-in check valve to keep the system primed; a submersible motor design with no dynamic shaft seals to erode; and a CAT 2-micron fuel filter. Duramax kits include a "fail safe" valve. In the event of failure or a no-run condition, the valve opens and allows fuel to bypass the pump—so the engine continues to run and you can get to your destination, eliminating tow bills. Order the model recommended for your application. Additional features include: * Unique draw-through technology * 3/4 in. in tank pickup tube * 100 micron in-tank filter * In-tank baffle included, eliminating 1/4 tank issue * Quick-disconnect fittings for all fuel lines * 1 in.-14 fuel filter thread allows the use of other common filter brands * Stainless steel filter stud and filter dip tube (corrosion-resistant) * Flow-through design; no shaft seal to fail or leak * Wiring harness with Delphi sealed Weatherpack connectors (vehicle-specific pumps only) * Self-priming, no need to pre-fill the filter during install or filter swap * Available with your choice of gph ratings * OEM-style return; no need to modify the filler neck
Not Yet Reviewed
$2,331.00
$2,097.90
On Sale
Aeromotive billet fuel rails are built for maximum fuel flow and ease of installation. They deliver optimal injector supply with minimal hydraulic fluctuation and will feed up to 3,000 hungry horses. The fuel rails feature ORB-08 ports with compact connections and positive leak-free sealing. Full-size ports at the end of the rails insure proper fuel flow. Additional inlet and outlet ports are provided where required for plumbing convenience. Steel mounting brackets are custom engineered for each application, combining a solid durable mounting platform that ensures a correct fit. Aeromotive fuel rails are CNC-machined and include a great looking anodized finish. Order the kit recommended for your vehicle.
( 14 )
$1,729.40
$1,556.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
