Availability
On Sale
BD Diesel automatic transmission valve bodies give your stock transmission increased holding capacity to handle higher horsepower engines. They have a newly designed anodized aluminum manual valve, new springs for improved shift qualities, and increased port sizes for better cooling.
Not Yet Reviewed
$1,204.95
$1,084.46
On Sale
Dinan valved exhaust systems are available in cat-back and rear axle back options for a variety of Toyota applications. These exhausts convey the sweet sounds of a deep, rich, euphonious note that are unmistakably Dinan; in addition to retaining the flexibility of valves, Dinan exhausts are the epitome of sound without sacrifice. Utilizing factory cut points and mounting mechanics, Dinan exhaust systems are a straightforward install with precision fitment, just like you'd expect straight from the manufacturer. Mounting and proper fitment is where the similarities to the factory exhaust end, however. Fabricated from brushed 100 percent T304 stainless steel, TIG-welded and free of hydroformed pipe, each upgraded system is a marked improvement from its predecessor—both in terms of material/construction and overall looks. For weight savings and simplicity, the stock single-to-dual pipe setup has been abandoned in favor of an enlarged, free-flowing single pipe system. This pathway feeds into a muffler that limits frequencies associated with drone, as well as assists in altering the overall tone of the setup to deliver the signature low Dinan rumble. The no-nonsense design allows shocking versatility in sound levels when paired with features, like valves, often associated with more fanciful alternatives. The unabashedly spartan, yet effective, pipe layout forces gasses to escape from the rear out of massive dual, straight cut, 114.3mm (4.5 in.) exhaust tips emblazoned with the laser-engraved Dinan logo. The tip branding further cements any lingering doubt that the system visible is something above and beyond stock. Unquestionable enhancements to the overall chorus emitted through the Dinan system transcend all modes, making the vehicle a delight to drive and enjoy. However, for those who want options to limit the extraordinary soundtrack for late night or early morning arrivals/departures (or any number of other reasons), factory valve control is retained. This effectively makes the system behave similarly to a straight-pipe system that promotes maximum flow and volume when the valve is open—and emit more subdued resonant vocals when the valve is closed; and exhaust gases are wholly redirected through the muffler. It's the perfect blend of civility when not pushing the car or the full spectrum of auditory delight when in it. No matter the situation, Dinan valved exhaust systems are the answer for discerning enthusiasts looking for sound without sacrifice. Additional product features: * Maximum gains of +6 HP and +5 lbs.-ft. of torque * Enjoyably louder, sportier sound * Drone abatement technologies used to reduce cabin resonance * Dual 4.5 in. (114.3mm) double-walled clamp-on tips with laser-engraved Dinan logo * Larger diameter piping for increased flow (83mm throughout primary run vs. 80mm at largest point) * 100 percent 304 stainless steel construction * Retains factory valve control * Factory-like fitment with included mounting hardware * Tips available with polished or black ceramic coated finish
Not Yet Reviewed
$1,599.95
—
$2,499.95
$1,374.95
—
$1,438.95
On Sale
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,291.95
—
$1,702.95
$1,162.76
—
$1,532.66
On Sale
Stainless Works Legend performance connect exhaust systems are fabricated to create the Stainless Works signature growl, while improving the driver experience. Strategically designed for improved tone with restrained loudness—they still manage to get the blood flowing for anyone close enough to hear and appreciate that classic muscle car sound. These 3 in. stainless steel cat-back systems are available in passenger side or split rear exit location styles, depending on application. Unleash more torque, horsepower, and the fierce sound your vehicle has been holding back with a Stainless Works Legend performance system. Order the kit recommended for your specific vehicle and engine size. Features, parts, and specs may include: * Drone-free aggressive dual mufflers * Designed to fit to the performance connection point * Corrosion-resistant 304 stainless steel * TIG-welded * Exits out at factory location * Dual slash-cut double wall tips (depending on application) * Mates to OEM tips (depending on application) * Lifetime warranty on materials and craftsmanship
Not Yet Reviewed
$1,532.35
$1,290.40
On Sale
Pedders' renowned expertise plus advanced technology equals XA Extreme coilover kits that let you click, tune, and play! These height-adjustable coilover shocks are built to Pedders' stringent quality standards. They feature sports-calibrated tunable damping, motorsports coil springs individually tuned to suit each application, and a host of other high performance features—including engineered mounting bracketry. Plus, shocks have a 30-position adjustable bump and rebound damping setting which offers a fine-tuned suspension that's ready to play with just a click of a button. For the performance enthusiast, Pedders XA Extreme coilover kits are a great fit. Order the kit designed for your vehicle application.
( 13 )
$1,349.96
—
$1,529.96
$1,199.98
—
$1,359.98
On Sale
Stainless Works Legend factory connect exhaust systems are fabricated to create the Stainless Works signature growl, while improving the driver experience. Strategically designed for improved tone with restrained loudness—they still manage to get the blood flowing for anyone close enough to hear and appreciate that classic muscle car sound. These 3 in. stainless steel cat-back systems are available in passenger side or split rear exit location styles, depending on application. Unleash more torque, horsepower, and the fierce sound your vehicle has been holding back with a Stainless Works Legend factory exhaust system. Order the kit recommended for your specific vehicle and engine size. Features, parts, and specs may include: * Drone-free aggressive dual mufflers * Designed to fit to the factory connection point * Corrosion-resistant 304 stainless steel * TIG-welded * Exits out at factory location * Dual slash-cut double wall tips (depending on application) * Mates to OEM tips (depending on application) * Lifetime warranty on materials and craftsmanship
( 3 )
$1,532.35
$1,290.40
On Sale
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 272 )
$1,499.95
—
$1,799.95
$1,348.95
—
$1,618.95
On Sale
Stainless Works Redline performance connect exhaust systems are fabricated to get the most aggressive growl out of your engine, while eliminating any cabin drone. These 3 in. stainless steel cat-back systems are available in passenger side or split rear exit location styles, depending on application. Unleash more torque, horsepower, and the fiercest growls your vehicle has been holding back with a Stainless Works Redline performance system. Order the kit recommended for your specific vehicle and engine size. Features, parts, and specs may include: * Drone-free aggressive dual mufflers * Designed to fit to the performance connection point * Corrosion-resistant 304 stainless steel * TIG-welded * Exits out at factory location * Dual slash-cut double wall tips (depending on application) * Mates to OEM tips (depending on application) * Lifetime warranty on materials and craftsmanship
( 1 )
$1,532.35
$1,290.40
On Sale
Stainless Works Redline factory connect exhaust systems are fabricated to get the most aggressive growl out of your engine, while eliminating any cabin drone. These 3 in. stainless steel cat-back systems are available in passenger side or split rear exit location styles, depending on application. Unleash more torque, horsepower, and the fiercest growls your vehicle has been holding back with a Stainless Works Redline factory system. Order the kit recommended for your specific vehicle and engine size. Features, parts, and specs may include: * Drone-free aggressive dual mufflers * Designed to fit to the factory connection point * Corrosion-resistant 304 stainless steel * TIG-welded * Exits out at factory location * Dual slash-cut double wall tips (depending on application) * Mates to OEM tips (depending on application) * Lifetime warranty on materials and craftsmanship
( 2 )
$1,532.35
$1,290.40
On Sale
BD Diesel fuel injectors feature a new nozzle design, which atomizes fuel for more power and better fuel efficiency. They are available for a variety of diesel engines and have different horsepower ratings based on the vehicle's year and engine code designation. Order the model or set designed for your application.
( 1 )
$1,150.95
$1,035.86
On Sale
Edelbrock Performer RPM 454-O high-compression cylinder heads offer smaller ports for bigger performance. Designed for big block Chevy's with oval ports, these cylinder heads feature unique oval intake ports that flow similar to rectangular ports but the smaller size provides excellent seat-of-the-pants performance plus crisp throttle response! And, the 100cc chamber volume is ideal for your high-compression application. Both the intake and exhaust ports of these Performer RPM heads have been profiled for improved air flow and they have smaller-than-stock valve stems for less weight and excellent flow. More flow, more power, and more performance for your big block application comes with a set of Edelbrock Performer RPM 454-O high-compression cylinder heads.
( 13 )
$1,214.50
—
$1,251.50
$1,093.05
—
$1,126.35
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$1,119.50
—
$1,578.50
$1,007.55
—
$1,420.65
On Sale
Wanting to deactivate the Multi-Displacement System of your Hemi vehicle will require a few things, including a non-MDS camshaft and components. Summit Racing™ Gen III Hemi MDS delete kits are offered in versions designed for engines with or without Variable Valve Timing (VVT). They contain premium components (except programmer) to help you complete the job. Each Summit Racing™ delete kit will include a head gasket set, timing cover gasket, non-MDS lifters, replacement cylinder head fasteners, non-MDS solenoid plug, and camshaft, along with valve springs and/or camshaft phaser limiters. Choose the combo designed for your vehicle.
Not Yet Reviewed
$1,287.90
—
$1,652.84
$1,141.90
—
$1,592.25
On Sale
Edelbrock Performer RPM 348/409 Chevy cylinder heads have been specifically designed for the 1961-65 Chevy W Series 348/409 big block engines. These Performer RPM heads feature aluminum construction with original port locations and valve angles for bolt-on convenience. The CNC port-matched 220cc intake runners and 90cc exhaust ports optimize flow and power throughout the entire rpm range. With their new, improved port design, the Edelbrock Performer RPM 348/409 Chevy cylinder heads are sure to add some easy bolt-on horsepower to your engine.
( 1 )
$1,628.50
—
$1,665.50
$1,465.65
—
$1,498.95
On Sale
At the heart of any performance vehicle is its exhaust system. Hooker Headers, with its classic heart logo, has been at the core of the exhaust industry for years. They continue to push the boundaries of performance with their Hooker Blackheart exhaust systems line—part of a platform-designed full exhaust program. These components provide maximum exhaust velocity, ground clearance, style, performance, and quality. Order the configuration tailored for fitment on your specific vehicle. When it's time to tear the heart out of the competition—choose Blackheart! Depending on the application, features may include: * Full stainless steel construction for maximum strength and durability * High-efficiency crossovers and high-flow TIG-welded mufflers * OE-quality hardware (clamps, hanger rods, and rubber isolators) for excellent fitment and leak-free installation * Straight-through, no-muffler design on some systems for maximum flow and the most aggressive sound on or off the throttle * Downpipes available with or without high-flow cats * Quality welds for strength, longevity, and good looks * Utilize factory mounting points for ease of installation * Tube geometry designed for maximum ground clearance and hassle-free installation * Limited lifetime warranty * Dual-mode systems feature high-flow, straight-through, dual-path mufflers with bypass valve, utilizing the factory NPP actuator (mellow throaty tone with closed valve, and aggressive race sound with open valve) * Where applicable, they utilize OE-style AFM valves to prevent "check engine" light and reduce unwanted harmonics in 4-cylinder mode * Some systems feature dual-wall polished tips with laser-etched Hooker Blackheart logo * Some designed for off-highway race use only
( 46 )
$1,115.95
—
$1,499.95
$1,003.95
—
$1,348.95
On Sale
Holley Sportsman Model 4500 Dominator carburetors feature the patent pending new Holley Gen 3 main body, which is 5/16 in. taller than the previous generation! This new height allows for larger radius air entries to deliver smoother flow—which equates to improved throttle response and consistency. An extended air cleaner flange is incorporated for easy air scoop attachment when using the available air scoop adapter. Other features include all-aluminum construction, tunable billet metering blocks, throttle position sensor mounting points, and knurled (hand adjustable) curb idle screws. Each calibration has been dyno and track tested to deliver proven performance! Key features of the Holley Sportsman Model 4500 Dominator carburetor: * All-aluminum construction saves 3.8 lbs. over original models * Shiny with billet aluminum metering block and black hardware * Designed for use on Drag racers, Pro Street, or any high-horsepower engines * Calibrations optimized for today's race engines and new fuels * Fully machined from venturi throat to throttle bore for predictable and repeatable performance * Annular boosters deliver excellent signal and throttle response * Screw-in air bleeds offer precise tuning capabilities * Metering blocks feature improved durability, true gasket sealing, and adjustability (power valve channel restrictors, intermediate restrictors, and idle feed restrictors) * Dual 50cc accelerator pumps provide the perfect amount of fuel from idle to full throttle * 4-corner idle allows you to precisely control your idle system * Clear sight windows on fuel inlet side of bowls for easy and safe fuel level adjustments * Notched float and jet extension are installed * 5/8-18 in. inlet threads offer a large variety of plumbing options (uses standard 4500 fuel inlet spacing) * Factory-ready TPS mounting points for use with data acquisition systems * Knurled primary and secondary curb idle screws allow for easy idle adjustment without the use of tools * Contoured hex head squirter screws for streamlined airflow * Progressive secondary link installed for perfect off-the-line launches; no linkage parts under the carburetor (1:1 wire link included in kit) * 100 percent wet-flow tested by Holley technicians to assure carb arrives ready to run * Compatible with the Gen 3 Dominator 4-hole billet spacer
( 10 )
$1,249.95
—
$1,299.95
$1,123.95
—
$1,168.95
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,251.50
—
$1,625.50
$1,126.35
—
$1,462.95
On Sale
By popular demand, Holley is expanding the draw-thru supercharger carburetor line to now include the 4150 XP Series. Like the existing HP line, these carbs are available in 600, 750, and 950 cfm flow rates—and standard polished with black accents. The feature-laden XPs include a contoured venturi inlet for balanced airflow, screw-in air bleeds for precision-tuning capabilities, high-flow billet metering blocks, billet base plate, and Dominator-style fuel bowls which allow plumbing from either side. Supercharger XP carburetors also have a unique capability that allows their power valves to reference the intake manifold vacuum below the supercharger. This enables the power valve to operate as it should, based off intake manifold vacuum. A power valve provides further enrichment to the main metering system under load (low vacuum) conditions. Holley XP carburetors are the standard for square bore race carburetors. Race-Ready out of the box! Order the model with options preferred for your vehicle. Product details: * Tumble polished shiny finish for good looks * Application-specific blower calibration * Contoured venturi inlet offers balanced airflow for increased horsepower * Screw-in air bleeds for precision-tuning capabilities * Dual accelerator pumps for additional fuel under initial acceleration * Dual feed fuel inlets for constant high-volume fuel delivery * 4-corner idle allows you to precisely control your idle system * Mechanical secondaries for perfect off-the-line launches * Boost referenced power valve for proper enrichment under acceleration * Throttle lever cut off for clearance on a sideways application * 100 percent wet-flow tested by Holley technicians to assure it arrives ready to run
( 2 )
$1,149.95
—
$1,299.95
$1,033.95
—
$1,168.95
On Sale
Holley's Ultra XP carburetors are up to 38 percent lighter than their traditional carbs, offer 20 percent greater fuel capacity, and include a host of other features. One of the main perks is an integrated idle bypass valve that allows for idle adjustments while maintaining the proper throttle-plate-to-transfer-slot relationship. You'll also get all-aluminum construction, fully tunable billet metering blocks, billet base plate, adjustable secondary linkage, and knurled (hand-adjustable) curb idle screws. Enjoy the ultimate in square-bore race carbs; order the Ultra XP carburetor with options best suited for your race application! Some of the many other features include: * Your choice of several finishes and CFM ratings (from 600 to 950) * Contoured Venturi inlet offers balanced airflow for increased hp * Dual accelerator pumps provide the perfect amount of fuel, from idle to full-throttle * Clear sight windows on both sides of bowls for safe and easy fuel level adjustments * -8 AN (O-ringed) inlet threads offer a large variety of plumbing options from either side * Mechanical secondaries for perfect off-the-line launches * 100-percent wet-flow tested by Holley technicians
( 43 )
$1,199.95
—
$1,449.95
$1,078.95
—
$1,303.95
On Sale
Holley Gen 3 Ultra Dominator carburetors feature a brand new main body, brand new state-of-the-art calibrations, high-volume HP fuel bowls, and sizes up to 1,475 cfm! The metering blocks are fully adjustable (emulsion bleeds, power valve channel restrictors, and idle feed restrictors). These carburetors include redesigned Holley HP fuel bowls for racing. Internal baffling helps to control fuel slosh and minimize float level fluctuations in hard launching or cornering situations. The HP fuel bowls also have material added in key areas (the needle and seat, fuel inlet, and sight window areas) for added strength in demanding race environments and can be plumbed from either side. Some of the many Holley Gen 3 Ultra Dominator carb features include: * Main body 5/16 in. taller than the previous generation * Designed for larger radius air entries optimized using computational fluid dynamics (CFD) software to deliver smoother flow into fully machined, big-bore Venturi * Improved 6061-T6 billet aluminum metering blocks offering improved durability, true gasket sealing (sealing surface integrity), and brightly dipped anodizing for good looks and corrosion protection * Power valve channel restrictors are now machined lower in the metering blocks for improved fuel delivery to the power valve circuit * Accelerator pump channel internally drilled, eliminating the need for an external plug, * Excess material removed for increased fuel capacity * Snap-in-place bowl vent whistle makes removal and/or replacement easier * 20 percent more fuel capacity vs. traditional V-bowl, eliminating fuel starvation and providing consistent air/fuel ratios * Fuel shelf is positioned below the needle and seat to minimize fuel aeration and promote more consistent metering * Fuel trough designed into the floor of the bowl to route fuel flow directly to the jets and assist in keeping them covered by fuel * Clear sight windows on both sides of the bowls for easy and safe fuel level adjustments * Built-in drain plug in the front center of the bowl provides easy access to empty the bowl (contoured entry provides smooth fuel flow directly to the needle and seat) * Designed for use on drag race, Pro Street, or any high-horsepower engines * All-aluminum construction saves 3.8 lbs. over original models (28 percent weight savings) * Dual 50cc accelerator pumps
( 20 )
$1,499.95
—
$1,649.95
$1,348.95
—
$1,483.95
On Sale
Engineered for maximum performance, the new E-Tec Series aluminum cylinder heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes a more uniform atomization of the air/fuel mixture for increased power. Available with 170cc or 200cc intake runners, these cylinder heads are assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The E-Tec models accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers. Match your vehicle specs to the correct Edelbrock head for precise fitment.
( 13 )
$1,124.50
$1,012.05
On Sale
Flowmaster Delta 40/Outlaw tandem exhaust systems are part of their American Thunder Series of performance. These systems use various chambered mufflers, in this case, dual Delta 40 and Outlaw mufflers, to achieve the performance gains and aggressive sound that you want from your car, inside and out. The kits include functional exhaust valves to work with the OE actuator motors to select between sound levels. They are manufactured with 409S stainless steel and finished off with double-walled and polished 304 stainless steel tips. Create powerful, aggressive sound quality in track mode, while maintaining a mellow tone in stealth mode with Flowmaster Delta 40/Outlaw exhaust systems.
( 2 )
$1,629.95
$1,465.95
On Sale
XForce Varex exhaust systems deliver the power, sound, and style you desire. Fabricated with the strength and beauty of 304 stainless steel, they're also designed for unrestricted flow and high performance. The systems feature XForce's patented muffler innovation, Varex, that's engineered with sophisticated butterfly valve mechanisms. This allows you to select optimal power output and sound levels to meet your desired preference by directing the flow of exhaust gases. You can choose to purr in street mode, roar in racing mode, or growl somewhere in between. XForce Varex exhaust systems look fabulous and hand the control of power and sound to you. Order the style, size, and configuration recommended for your vehicle.
( 51 )
$1,259.10
$1,007.28
On Sale
Take control of your F-150's exhaust! With a durable high performance muffler, corrosion-resistant T-304 stainless steel and high-flow mandrel bends, Roush F-150 Active Exhaust kits use Roush Performance valve technology to control your exhaust note and make your F-150 stand out from the crowd. Product highlights for Roush F-150 Active Cat-Back Exhaust kit: * Fits the 2015-20 F-150 with 5.0L, 3.3L Ti-VCT, 3.5L EcoBoost (non-Raptor), or 2.7L Ecoboost engines * Does not fit short-cab configurations * Roush-designed high-flow muffler * More aggressive tone over stock * Made from durable corrosion-resistant high-grade 304 stainless steel * Full mandrel-bent piping for consistent flow * Dual 4 in. stainless steel tips etched with the Roush logo * Uses OEM hangers and mounting points * Requires no welding * Includes all necessary hardware * Roush limited lifetime warranty included * This product will NOT fit F-150s equipped with the high-output 3.5L EcoBoost engine
Not Yet Reviewed
$1,299.99
$1,169.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
