Availability
Showing In Stock Items. Show All 20 Items.
On Sale
Hooker Blackheart engine swap exhaust systems are designed to offer the best available ground clearance and fit, along with easy installation. They use factory mounting points for stock-like fitment and are designed for clearance with OE or aftermarket adjustable rear upper control arms. Order the Hooker Blackheart engine swap exhaust kit best suited for your engine swap application. Features: * Full 2.5 in. or 3 in. (depending on application) diameter system for maximum flow/horsepower potential * Constructed from lightweight, 18-gauge, mandrel-bent, 304 or 409 stainless steel (depending on application) for maximized strength and durability * Optimized bend geometry provides clearance for wide rear wheels/tires (in the factory wheel well) * Tube geometry designed for maximum clearance and hassle-free installation with all necessary installation hardware included * Manufacturer's limited lifetime warranty
Not Yet Reviewed
$1,349.95
—
$1,499.95
$1,213.95
—
$1,348.95
On Sale
Pypes header/crossmember-back exhaust systems are designed to boost your car's performance to the next level with more power and better mileage. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge stainless steel pipe. Also included are stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model recommended for your vehicle.
( 13 )
$1,084.79
$1,044.79
On Sale
Pypes Race Pro dual exhaust systems are designed to boost your car's performance to the next level--you'll get more power, better mileage, and a rich, throaty tone that cannot be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, stainless steel tubing and precision-matched Pypes Race Pro mufflers. When it comes to flow, you can't get anything better than Race Pro mufflers. Their throaty sound is surprisingly tame, considering the absence of any obstructions when you look in them. At idle and low-rpm cruising, you will not draw much attention, but upon acceleration, bystanders look out! Race Pros' aggressive sound is the result of applying a layer of stainless mesh around a unique internal perforated tube, accompanied by a healthy stuffing of basalt insulation before the units are sealed. Additional features of Pypes Race Pro dual exhaust systems: * 16-gauge stainless steel pipes * Straight-through design mufflers * Hangers, clamps, and instructions included * Slip-fit connections for a fast and trouble-free installation * Some cutting may be required
( 171 )
$1,232.79
$1,192.79
On Sale
Pypes Street Pro exhaust systems are designed to boost your car's performance to the next level—you'll get more power, better mileage, and a rich, throaty tone that can't be ignored. Built to outflow and outlast factory exhausts, these systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel mufflers. Don't let the looks of these mufflers fool you. Although at idle, you may cause passengers to reach for their seat belts—upon acceleration, a smooth, authoritative tone turns apprehension into a reassuring confidence. These great street/strip mufflers will maintain their rich sound qualities for life because there is no filler to burn off. They're recommended for stock to medium-modified vehicles where an aggressive sound is appreciated but not advertised. Pypes Street Pro exhaust systems include stainless steel hangers, clamps, and instructions; their slip-fit connections facilitate a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 200 )
$1,230.79
$1,190.79
On Sale
Built to outflow and outlast factory exhausts, Pypes Violator dual systems feature mandrel-bent, 16-gauge, stainless steel pipe and precision-matched stainless steel Violator mufflers. These mufflers flow as much air as the Race Pro mufflers but have an incredibly unique and aggressive sound—the result of an internal louvered tube with sound deflector chambers. If you want to be noticed, these are your mufflers! Pypes exhaust systems include stainless steel or cadmium plated hangers, clamps, and instructions; and they have slip-fit connections for a fast and trouble-free installation (some cutting may be required). Order the model designed for your vehicle.
( 150 )
$1,228.79
$1,188.79
On Sale
Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.
( 162 )
$1,119.95
—
$1,599.95
$1,006.95
—
$1,438.95
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 704 )
$1,163.35
—
$1,361.75
$1,047.02
—
$1,225.58
On Sale
Flowmaster Outlaw Series exhaust systems are mandrel-bent for maximum performance and include specially designed mufflers. They deliver bold, dynamic interior and exterior tones for enthusiasts who covet the most aggressive components available. These systems include hardware and tips, where applicable--so installation is quick and easy. The kits are available in dozens of configurations for fitment on specific vehicles, including standard, crew, extended, and extended crew truck cabs; and long or short bed lengths. Order the Flowmaster Outlaw model designed for your application.
( 272 )
$1,149.95
—
$1,799.95
$1,033.95
—
$1,618.95
On Sale
Flowmaster American Thunder exhaust systems are designed with the latest exhaust technology available--resulting in improved acceleration, passing power, and fuel mileage. A key to these performance upgrades is Flowmaster's use of mandrel-bent tubing, which allows superior exhaust gas flow. The systems also feature mufflers (single or dual) that deliver plenty of the rich Flowmaster sound you expect. Components are built from stainless steel or aluminized steel; and some models include tips. American Thunder exhausts are available in more than a hundred configurations for fitment on specific truck and car applications.
( 545 )
$1,114.99
—
$1,799.95
$1,003.49
—
$1,618.95
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 227 )
$1,599.95
$1,039.95
On Sale
These stainless steel Force II exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is the use of mandrel-bent tubing. The tubing allows for superior exhaust gas flow, while stainless steel construction has been utilized for its corrosion-resistant qualities.
( 75 )
$1,399.95
—
$1,449.95
$1,258.95
—
$1,303.95
On Sale
Flowmaster Stainless Steel American Thunder exhaust systems have been designed with the latest exhaust technology available. Through this technology, you will experience improvements in acceleration, passing power, and fuel mileage. The key to these performance improvements is Flowmaster's use of mandrel-bent tubing. Their tubing allows for superior exhaust gas flow, while their stainless steel construction allows for their corrosion-resistant qualities. These American Thunder exhaust systems also feature a stainless steel muffler(s) that'll give you plenty of Flowmaster sound.
( 302 )
$1,199.95
$1,078.95
On Sale
Flowmaster Force II exhaust systems are engineered with the latest technology for improvements in acceleration, passing power, and fuel mileage. The key to these performance enhancements is the use of mandrel-bent tubing. Force II assemblies are available in dozens of muffler and pipe configurations for fitment on thousands of year/make/model cars and trucks. Choose the size and style that's compatible with your engine type.
( 230 )
$1,799.95
$1,618.95
On Sale
MBRP Pro Series exhaust systems are built for performance auto enthusiasts looking for a great quality exhaust. They're constructed from T304 stainless steel for optimal durability and reliability. Pro Series systems deliver a rich, mellow exhaust note and over 70 percent increased exhaust flow. They include the necessary pipe and muffler, and utilize OEM hangers for complete bolt-on cat-back (or downpipe-back) exhausts. These kits are available with polished stainless steel exhaust tips or carbon fiber exhaust tips for a beautifully finished look. These units are available in a variety of configurations for gas truck/SUV, diesel, and muscle car applications—so you can choose which design is best for your vehicle. MBRP offers a no-hassle lifetime warranty on Pro Series exhaust systems.
( 50 )
$1,294.99
—
$1,364.99
$1,035.99
—
$1,091.99
On Sale
By the early 1970s, the amount of pollutants being expelled by vehicles had reached the danger point. To combat this issue, the government regulated the use of catalytic converters. Crown Automotive catalytic converters are designed and built to OEM specs for reliable service and safety standards. They are the same size and shape as the original units to reduce fitment issues. Order the replacement model designed for your application.
( 1 )
$1,117.99
$1,006.19
On Sale
Pypes converter-back exhaust systems feature mandrel-bent 304 or 409 stainless tubing, tailpipes, plated hardware, and hangers. Depending on your application, the systems include one or two quality mufflers. Order the model designed for fitment and performance on your specific vehicle.
( 36 )
$1,075.79
—
$1,086.79
$1,035.79
—
$1,046.79
On Sale
Are you serious about "cool"? MBRP Pro series exhaust systems offer the coolest duals and the hottest singles for your muscle car. Pro series systems are constructed from T304 stainless steel and feature mirror-polished mufflers and tips for a lasting appearance and optimal durability. Crafted with smooth mandrel bends and high-flow mufflers, MBRP exhaust systems give your ride the sound, torque, and horsepower that every true muscle car should have. And, since MRBP shares your passion, they've created their systems to be installer-friendly with common hand tools for a bolt-on, no-weld, no-hassle installation! So, don't you think it's time to get serious? Add Pro series muscle car exhaust systems from MBRP--the makers of performance, sound, and style.
( 3 )
$1,494.99
$1,195.99
On Sale
MBRP Armor Pro Series exhaust systems are designed and built for the most serious enthusiast who will settle for nothing less than top of the line. Optimized durability is provided by the mandrel bent T304 stainless steel construction, additional benefits of this material are its ability to be easily cleaned while withstanding extreme conditions, on or off the road. All of the tubing is mandrel bent for maximum exhaust flow and mandrel bending ensures no rippling in the bends. The end result is that these exhaust systems give you more fresh air inside your engine's cylinders, allowing it to produce more power and improve vehicle performance and longevity. In addition, these exhaust systems bolt to the OEM exhaust hangers and includes all necessary hardware to complete the installation.
( 4 )
$1,364.99
—
$1,814.99
$1,091.99
—
$1,451.99
On Sale
Pypes Turbo Pro exhaust systems are designed to deliver enhanced performance, provide extra punch in the passing lane, and improve gas mileage. Fabricated using the highest quality materials, the systems contain smooth, seam-coated, 16-gauge, mandrel-bent, 409 stainless steel pipe that ensures maximum exhaust gas flow, which can significantly boost horsepower. The dual exit tailpipes are precision-matched with Pypes stainless steel Turbo Pro mufflers offering no-drone and no-resonance yet maintaining a steady flow of exhaust gases that results in a truly quiet performance exhaust note. The mufflers are designed to withstand the output of today's big motors and come with Pypes' famous lifetime warranty. Systems include clamps and hanger, and can be installed at home without any special tools.
( 28 )
$1,237.79
$1,197.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
