Availability
Showing In Stock Items. Show All 24 Items.
On Sale
The Summit Racing™ Flex Fuel Sensor Bypass lets you use a factory-type flex fuel sensor in a high-volume, high-flow fuel system with lines up to -10 AN. The bypass allows a portion of the fuel to run through the sensor to measure the ethanol content for your ECM--and then allows the rest to flow around or parallel to the sensor to avoid a restriction in the feed line. Made from billet aluminum and hard anodized black, the bypass kits come with -6, -8,and -10 AN adapter fittings and also include methanol-resistant O-rings.
( 1 )
$139.99
$109.99
On Sale
OEM sensors are restrictive for fuel systems that flow greater than 400 lph. Aeromotive FlexFuel sensor adapters allow for the use of an ethanol sensor (FlexFuel Sensor) and a higher flow rate, as they create an alternative route for the fuel--while using the sensor to determine the percentage of ethanol in the fuel. The adapter bodies are constructed of 6061 T-6 aluminum alloy and bright dip anodized. Additional features: * Dual O-ring sealing on tubing of the FlexFuel sensor * ORB -10 inlet/outlet ports that can be adapted to any fuel line size
Not Yet Reviewed
$141.10
$126.99
On Sale
Agility Auto Parts offers a complete line of fuel tank straps, covering a wide variety of North American vehicles. Engineered to meet or exceed all OEM specifications, the straps are constructed of steel and treated with a rust-proof finish to ensure durability and strength. Order the length needed for your fuel tank application.
( 2 )
$116.99
—
$127.99
$105.29
—
$115.19
On Sale
Your fuel line is the connection to your fueling system and, with the proper connections, should deliver the right amount of fuel at the correct rate to power your performance ride on the strip or street. Fragola Performance Systems offers high performance fuel line kits for the most popular carburetors. These premium fuel line kits consist of strong braided stainless steel lines and aerospace-quality aluminum fittings that are "bright-dipped" for corrosion resistance and lasting appeal. Fragola fuel line kits arrive completely assembled with a high-flow adapter and a special plugged cap with a provision for a fuel pressure gauge. These fuel line kits are designed with an easy system of detachment, allowing you to make quick jet changes at the track. Feed your power racer with American-made Fragola Performance Systems fuel line kits--you'll be glad you did.
( 31 )
$109.99
—
$130.99
$104.49
—
$124.44
On Sale
Aeromotive Pontiac G8 ZL1 mechanical regulator adapter kits convert the Gen 5 Camaro ZL1 fuel module to 60 psi/4 Bar outlet pressure. Kits include: * Wiring pigtail * Fuel pressure regulator / 60 psi * In-tank crossover line adapter * Full instructions * Note: Will not fit CTS-V2 fuel modules
Not Yet Reviewed
$127.30
$114.57
On Sale
Aeromotive fuel rail fitting adapters are designed to fit your stock return lines and fuel rails. They're made of CNC-machined stainless steel or billet aluminum for durability against any type of gasoline. The adapters use the factory spring lock design with an outlet made in an AN size specifically for braided stainless steel hose. Order the fitting size, style, and finish needed for your applications.
( 17 )
$118.25
$106.42
On Sale
Waterman gear fuel pump flange fittings provide easy hook-ups for your fuel line. Available in multiple attachment types, they're made from aluminum, given a black anodized finish, and are fully compatible with all common fuel types. Order the fitting sizes needed for your application.
Not Yet Reviewed
$146.99
$132.29
On Sale
Holley LS Hi-Ram fuel rail adapter kits are designed to enable correct placement of your fuel rail when using a short style injector versus the taller LS1 style. These kits include high-volume fuel passage rails to allow for high-horsepower applications and to dampen fuel pressure oscillations. Holley kits also include: * Fuel rail adapters * Mounting hardware * Injector O-rings * Installation instructions
( 2 )
$249.95
$224.95
On Sale
FUELAB Velocity Series lift pump wiring installation kits are designed to connect your FUELAB Velocity Series pump to your truck. They include the extended lift pump wiring harness with fused adapter, Superflex fuel line, fittings, and cable ties. The kits are available for today's most popular Ford, GM, and Dodge trucks with diesel engines.
( 2 )
$139.41
$125.47
On Sale
Part of Holley's complete line of fuel system products, Holley HP billet fuel pressure regulators are available in a variety of configurations for carbureted or fuel injected engines. Some versions are even adaptable to either carburetors or EFI. They allow you to upgrade a carbureted system to EFI without replacing the fuel pressure regulator. All HP billet fuel pressure regulators feature a 2-port design, provide for precise fuel pressure adjustments, and are available in your choice of demand (no return line) or by-pass (with a return line) styles. Depending on the model, they are for use only with electric fuel pumps, or with either mechanical or electric pumps. Designed for street/strip applications, they are CNC-machined from 6061 T-6 billet aluminum for strength and have bright dip anodized black bodies with clear dip anodized tops for corrosion resistance and good looks. Whatever your fuel system needs, Holley has you covered. Depending on model, features may include: * Adjustable from 4 to 65 psi for use with EFI or carburetors * 4.5 to 9 psi adjustment range for use with carburetors only * EFI-only models are adjustable from 15 to 65 psi * Two port sizes available, 3/8 in. NPT or -6 AN inlet/outlet and return (where applicable) * Fitting for manifold reference * 1/8 in. NPT gauge port * Boost reference--1:1
( 160 )
$149.95
—
$272.95
$134.95
—
$245.65
On Sale
Holley bypass fuel pressure regulator kits are part of a complete line of fuel system products from Holley. Offering several different kits, each features a billet or diecast aluminum regulator with an adjustable psi for precise fuel pressure changes and they are finished for corrosion resistance and good looks. The regulators are fitted with a 1/8 in. NPT gauge port and include an Earl's fuel pressure gauge, three adapter fittings, a barbed fitting for the vacuum port, a mounting bracket, and all necessary hardware. Choose the kit to best fit your project's needs and performance.
( 30 )
$162.95
—
$269.95
$146.65
—
$242.95
On Sale
Aeromotive couplers offer more area and smoother transitions from the inlet to the outlet, resulting in less restriction than any other fitting line. Machined from 6061 T-6 aluminum or stainless steel for a precision fit and unmatched flow, Aeromotive specialty fittings, port adapters, and couplers are available in a variety of AN sizes and configurations. The billet aluminum fittings are anodized Type II bright dip black for corrosion protection and unrivaled aesthetics, plus all Aeromotive fittings and adapters are fully compatible with gasoline and alcohol-based fuels. Order the couplers needed for your application.
( 5 )
$128.90
$116.01
On Sale
DeatschWerks bulkhead adapter fittings are constructed from heat-treated 6061 aluminum, and then anodized for further protection. The union fittings are available in a variety of styles and sizes to complete your job with the best fit for leak-free performance. Plumbing a fuel system has always been more difficult than it should be. DeatschWerks plumbing line helps to simplify this process by providing you with everything you need—and nothing you don't.
( 7 )
$119.00
$107.10
On Sale
MSD Atomic EFI billet fuel rails are the perfect complement for your Atomic AirForce intake manifold. Whether you're looking for just rails, or complete kits with all the necessary plumbing--these fuel rails will have you looking for any excuse to pop the hood. They feature a bright dip, black anodized finish with laser-etched logos and a 5/8 in. diameter fuel passage flow capacity for high-horsepower applications. Make your engine look as good as it performs with MSD Atomic EFI fuel rails. Features, specs, and parts may include: * Fuel rails are machined to accept large -8 (3/4 in.-16) O-ring fittings * Includes mounting brackets and hardware * Includes four -6 to 3/4 in.-16 O-ring adapters
( 1 )
$249.95
$224.95
On Sale
Aeromotive VaporWorx corner pickup kits provide the ultimate in low fuel level performance for Gen5 Camaro, CTS-V2, and C7 fuel modules. They will also work with other fuel modules that have a suction port/in-tank crossover line connection usually located on the lower reservoir. Kits include: * Two genuine Walbro vented pickups * In-tank rated flexi-hoses * Stainless steel full-contact clamps * 45-degree 3/8 in. x 5/16 in. quick connector fitting * Y, T, and in-line connector fittings * Three 15 in. hoses * One 8 in. hose Note: Suction pump connection needed. Not for use on standalone pumps.
Not Yet Reviewed
$190.95
$171.86
On Sale
These AEM Electronics boost control solenoid kits will not degrade rich fuel mixtures like most common boost control solenoids. This will significantly extend life and eliminate the chance of sticking from contamination. They are pressure-tested to an amazing 100 psi and will not leak. AEM Electronics boost control solenoid kits include -4 AN fittings so that you can securely attach wastegate lines without worrying about leaking at the connection. AEM also includes the barb-style hose fittings where push-on fittings are required.
( 5 )
$135.95
$122.35
On Sale
Holley LS steam vent kits prevent hot spots or overheating. Designed to eliminate trapped air and steam from your engine, these complete kits are available to plumb your engine and include the appropriate hose and hose ends to make installation a breeze. They are more attractive than the OEM lines and offer increased flexibility when using aftermarket intakes and other accessories on your performance vehicle. Holley LS steam vent kits may feature: * Adjustable pivoting steam vent adapters * Black push-on or stainless braided Speed-Flex hose and hose ends * Available in front or 4-corner plumbing options
( 11 )
$170.95
$153.85
On Sale
Nitrous Outlet coolant crossovers stop hot cylinders and pre-detonation. First, the easily installed water vapor bleed kits help to distribute heat from cylinder to cylinder, decreasing temperature variation. Then the coolant crossover lines increase the flow through the engine block, reducing engine temperatures. Nitrous Outlet kits feature billet aluminum distribution blocks and stainless steel pre-bent hard lines or braided flex lines; they enable you to run these systems on your car all year long without the worry of a bursting hose, rust, or corrosion. The selection of coolant crossover kits comes complete with the necessary fittings and adapters to make the install hassle-free. Keep your block and cylinder cooler with Nitrous Outlet coolant crossovers.
Not Yet Reviewed
$286.99
$243.94
On Sale
Manufacturer Rebate
AutoMeter Sport-Comp analog gauge kits are the trademarks of the entire AutoMeter line. With rugged race styling and unmatched performance, they have been in more winning vehicles than any other gauge on the market today. Upgrade your dashboard with AutoMeter's Sport-Comp analog gauge kits to take your performance to the next level. Features and benefits of AutoMeter's different type gauges: * Bright anodized bezels, red pointers, race proven movements and easy-to-read face dials * Traditional incandescent lighting illuminates around the perimeter of the dial using incandescent bulbs * AutoMeter's race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle * 4-in-1 gauge models provide a solution to limited dashboard space while providing a clean look and allow you to monitor critical parameters * 12 and 16-volt compatible, well-suited with nearly every street car or race car electrical system * Individual AutoMeter air core meter movements for each function provide the accuracy and durability required by even the most demanding applications
Not Yet Reviewed
$240.99
$216.89
On Sale
The FuelTech WB-O2 Nano is a compact, efficient wideband oxygen sensor tool for use in monitoring and adjusting combustion. They're designed to condition and read the Bosch LSU 4.2 wideband oxygen sensor with speed and precision for a broad range of mixtures--in addition to storing the engine's most important information, allowing a detailed analysis of its operation status. The WB-O2 Nano features a channel for capturing the engine's RPM signal, as well as four other analog channels that can be configured, for a total of six channels of storage capacity in its internal memory. Another important feature of the FuelTech WB-O2 Nano is the unit's high-speed USB connection, which allows easy connectivity to a notebook or computer, thus eliminating the demand of serial adaptors and facilitating equipment operation, as external feed is not necessary. Additional details: * O2 sensor reading is sent via CAN to the ECU and recorded in the internal datalogger, without using any analog input * Can be mounted in driver's compartment for quick reference--and adding O2 sensor to the ECU doesn't occupy valuable analog input channels * IP67 waterproof rated * Extended reading scale 0.35 to 9.99 Lambda, 5.15 to 147 Gas A/FR, 2.24 to 64 alcohol A/FR * CAN communication with PowerFT line
( 1 )
$199.00
$169.00
On Sale
Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at Flowmaster stainless steel 40 Series mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, these mufflers allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside of it. So, if you want more power and less noise, then you need to acquire these Flowmaster stainless steel 40 Series mufflers.
( 59 )
$132.95
$119.65
On Sale
Agility Auto Parts offers a complete line of radiators covering most North American vehicle applications. These certified automotive condenser components meet or exceed the manufacturer's specifications, making them ready to install out of the box. Engineered and manufactured under ISO TS16949 quality system guidance, every Agility Auto Parts radiator is 100 percent leak-tested for trouble-free operation and utilize a B-tube design to optimize coolant flow through the radiator, while adding structural rigidity creating a durable tube. Plastic tanks are designed and tested to 100,000 pressure cycles with no cracks, bowing, or distortion. The tanks are cast with ribbing inside or out for added strength. Order the radiator model designed to fit your application.
( 32 )
$116.99
—
$258.99
$105.29
—
$233.09
On Sale
BD Diesel pressure transducer upgrade kits are designed to replace the original governor pressure transducers, a leading cause of failure in 5.9L Cummins transmissions. These defects have become even more commonplace on performance transmissions that run higher line pressures. They replace the original sensor with a much more durable and reliable sensor signal to correct range and stop fault codes. As a result, your late model tranny can handle higher transmission line pressures without failure. Additionally, the plug-in circuit has its own built-in temperature sensor for improved reliability.
( 2 )
$210.95
$189.86
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
