Availability
Showing In Stock Items. Show All 70 Items.
On Sale
Blue electric fuel pumps from Holley feature an improved design for street and strip applications, a new lower housing casting for enhanced fuel flow, and a tumble-polished billet look with the distinctive blue logo. These pumps have a 110 gph flow rate, draw only 3 amps, and have a maximum pressure of 14 psi. They weigh only 3 lbs., and include a mounting bracket.
( 303 )
$239.95
$179.95
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 47 )
$204.99
—
$257.99
$199.99
—
$242.99
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 349 )
$138.95
—
$230.95
$104.95
—
$150.95
On Sale
Summit Racing™ fuel pump and regulator Pro Packs consist of proven performance fuel pumps and regulators. Just select your brand, flow rate, and pressure requirements, and one part number gets you everything. We've even included a relay kit with the electric fuel pump combos. Economical and convenient, Pro Packs are available for virtually any application from the 1950s and up.
( 60 )
$271.94
—
$280.90
$200.90
—
$211.94
On Sale
These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.
( 50 )
$162.95
$105.95
On Sale
Do you want a better fuel pump option? Mr. Gasket meets your fuel needs with high performance electric fuel pumps. These reliable, lightweight fuel pumps are 100 percent pressure-tested for high-flow applications. Mr. Gasket high performance electric pumps are universal inline-style rotor/vane fuel pumps that are compatible with all carbureted engines and feature 3/8 in. inlet/outlet connections. The pumps are available with or without a regulator. Options are good. Get a better fuel pump at a better price with Mr. Gasket high performance electric fuel pumps.
( 17 )
$154.95
—
$211.95
$100.95
—
$137.95
On Sale
Holley Sniper stock replacement fuel tanks are designed to meet or exceed the quality of your factory original. Whether you have a track or street car, or a car you're restoring, Sniper has the high-quality fuel tanks you're looking for. Start your fuel system project fresh with a Holley Sniper stock replacement fuel tank—order the model designed for your application. Features include: * The steel fuel tanks have a galvanized finish for corrosion protection and good looks * Stock replacement fuel tanks are made to OEM specifications for a great fit * Perfect companions with Holley muscle car EFI modules or Retrofit EFI pump modules * Tank sending unit lock ring is included
( 61 )
$212.95
—
$286.95
$117.95
—
$157.95
On Sale
Summit Racing™ fuel tanks are designed to meet or exceed the quality of factory fuel tanks. Whether you have a track car, classic car, or car you're restoring, Summit Racing™ has the high-quality fuel tanks you're looking for.
( 223 )
$204.99
—
$271.99
$184.49
—
$244.79
On Sale
Mallory Marine electric fuel pumps deliver a constant flow of gasoline to the engine to help prevent vapor lock. They are manufactured from quality materials and components to ensure increased durability and longer life. The fuel pumps are available in a variety of configurations to fit your specific marine engine application.
( 1 )
$299.95
$194.95
On Sale
Holley electric in-tank fuel pumps provide the extra fuel required after completing other engine modifications, such as adding performance camshafts, headers, larger injectors, and so on. They use a proven gerotor-type pump and are compact enough to fit existing hanger assemblies. They're also designed for easy installation and come complete with instructions and all necessary parts, including a new strainer-type fuel filter. Dozens of models and options are available; order the fuel pump recommended for your vehicle.
( 11 )
$362.95
$199.95
On Sale
Holley drop-in fuel module assemblies cover a wide range of vehicles and performance expectations—including dual pump designs. These replacement assemblies meet the highest-quality standards offered for increased performance and fuel efficiency. Holley drop-in fuel modules are capable of supporting 550-plus horsepower right out of the box! Dozens of models are available, with flow rate options between 50 and 277 gph. Order the fuel module recommended for your vehicle. Features may include: * Plug-and-play wiring harnesses * Integrated fuel storage and filtration technology * Built-in, pre-calibrated fuel level sensors * HydraMat filter (keeps fuel available at the pick-up during radical maneuvers and provides contamination protection) * Most models include sending unit
( 8 )
$475.95
$261.95
On Sale
Brothers Trucks fuel tanks are the result of a creative solution for an easy under bed gas tank conversion when you want to move the classic or vintage stock setup from in or near the cab. They combine a Brothers tank with appropriate hardware for easy installation. While modifications are required for the new fill neck location, in most cases, the rear frame crossmember is unaffected by this installation. Increase the safety factor of your classic truck or SUV with an assist from Brothers Trucks fuel tanks. More product features and specifications include: * Classic applications model includes straps, lock ring, and hardware * Vintage applications model includes special mounting brackets and will require an application-specific sender (original spare tire crossmember removal may be required)
( 1 )
$261.95
$144.95
On Sale
Holley Dominator billet fuel filters are precision CNC-machined from 6061-T6 billet aluminum for maximum strength and durability. They feature a black bright dip anodized body and clear bright dip anodized ends for superior corrosion resistance and good looks. Holley Dominator billet fuel filters flow an outstanding 260 gph, have -12 AN O-ring connections, and come available in your choice of 10, 40, or 100 micron ratings.
( 8 )
$154.95
$100.95
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 31 )
$349.99
$249.99
On Sale
Quick Fuel fuel pressure regulators are made with premium materials throughout and include a broad range of styles with bodies made from cast aluminum or machined aircraft-grade billet aluminum. Offered in a variety of anodized and powdercoated body and top finishes for added durability and reliable performance, they are all designed to provide smooth, consistent, and repeatable performance.
( 75 )
$256.95
$141.95
On Sale
MSD Atomic EFI billet fuel rails are the perfect complement for your Atomic AirForce intake manifold. Whether you're looking for just rails, or complete kits with all the necessary plumbing--these fuel rails will have you looking for any excuse to pop the hood. They feature a bright dip, black anodized finish with laser-etched logos and a 5/8 in. diameter fuel passage flow capacity for high-horsepower applications. Make your engine look as good as it performs with MSD Atomic EFI fuel rails. Features, specs, and parts may include: * Fuel rails are machined to accept large -8 (3/4 in.-16) O-ring fittings * Includes mounting brackets and hardware * Includes four -6 to 3/4 in.-16 O-ring adapters
( 1 )
$249.95
—
$338.95
$137.95
—
$186.95
On Sale
The amazing HydraMat fuel pickups feature Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks, as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling. The Holley HydraMat fuel pickups are the solution! Surface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity. Holley HydraMats are available in various sizes and shapes to fit a wide variety of stock fuel tanks and/or race fuel cells. Features and benefits: * Patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells * Greatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and/or engine stalling * Perfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions * Surface tension and fluid wicking allow the HydraMat to continue to draw fuel from the tank or cell even when part of the mat uncovered * As an area of the HydraMat is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available * Unique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions * Eliminates the need for specialty reservoirs, sumps and pick up pumps saving cost and greatly reducing complexity * Also acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump * Can be folded and compressed for easy installation through a variety of fuel cell openings * HydraMats are also available in other sizes and shapes to fit a variety of stock fuel tanks and/or race fuel cells * Not for use with diesel fuels
( 64 )
$199.95
$109.95
—
$129.95
On Sale
Install Holley VR Series billet fuel filters in-line before the pump and eliminate issues before they begin. Fuel isn't a perfect liquid--it has particles floating around, some large enough to cause problems. These prefilters are CNC-machined from 6061-T6 billet aluminum and combine black anodized bodies and clear anodized ends for strength, corrosion resistance, and style. They're available in three different micron depths to best meet your EFI or hot street/race carb needs. Keep your vehicle's fuel pump happy with Holley VR Series billet fuel filters.
( 5 )
$184.95
$120.95
On Sale
Contaminated fuel translates into poor results on the race track and an often-sluggish ride on the highways. Earl's Performance billet inline fuel filters are built for high-flow and high-filtration efficiency. Precision CNC-machined from durable 6061-T6 aluminum, each housing is anodized clear and black for a modern look, as well as resistance to corrosion. These filters are available with options for both flow rate and micron rating. Replacement elements are available, sold separately. Features include: * 175 gph filters include female -8 AN O-ring inlets and outlets * 100 gph filters are built with female -6 AN O-ring end fittings * 260 gph and 460 gph filters feature female -12 AN O-ring inlets and outlets * 10 micron filters are recommended for use as a post-filter in EFI systems * 40 micron filters are for use as a post-filter in carbureted systems * 100 micron filters can be used as a prefilter in either type of system * 40 and 100 micron filters include a woven mesh stainless steel element * 10 micron versions feature a depth media element
( 5 )
$186.95
$102.95
On Sale
Holley VR Series fuel pressure regulators are part of their VR1 and VR2 Series brushless fuel systems product line. Designed to handle large volumes of fuel flow, they are capable of supporting 3,000+ horsepower. They are CNC-machined from 6061 T-6 billet aluminum for strength and have bright dip anodized black bodies with clear dip anodized tops for corrosion resistance. Holley VR Series fuel pressure regulators are available in 2-port and 4-port versions for carbureted or EFI-equipped engines. Features include: * EFI regulators are adjustable from 40 to100 psi * Carbureted regulators are adjustable from 4 to 9 psi * Compatible with gasoline, methanol, and E85 * 1/8 in. NPT gauge port * Designed for use with Holley VR1 and VR2 Series brushless in-line fuel pumps * Can be referenced on a 1:1 ratio--a barb fitting and a -4 AN fitting are included for reference connection * 2-port regulators feature -10 AN O-ring inlet/outlet and return * 4-port regulators feature -10 AN O-ring inlet and return with four -8 AN O-ring outlets
( 4 )
$449.95
$247.95
On Sale
Holley double adjustable fuel pressure regulators are designed for belt or cable driven pumps where fuel flow changes with engine rpm. Made from billet aluminum, they are offered in 2-port and 4-port models to complete your fuel system requirements, and the idle adjustment design is strategically placed so that none of the ports are blocked, like other designs. Features include: * Compatible with E85 and alcohol * Individual adjustment settings, one for idle and wide open throttle * Fuel pressure adjustability at idle can help prevent flooding at low rpms * Wide-open throttle settings help to prevent fuel starvation at the top end of the rpm range
Not Yet Reviewed
$389.95
$214.95
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$399.95
$259.95
On Sale
NOS OEM fuel injection plates ensure a steady, precise metered flow of nitrous and fuel for reliability, backed with years of laboratory research and dyno and dragstrip testing. The injector plates are available for those who want to build their own system or upgrade their current nitrous system, without the expense of buying a new complete system. Unless specified, NOS injector plates incorporate a low-profile (1/2 in. thick) plate, and are constructed of solid billet or diecast aluminum with a durable black finish. Select the kit recommended for your engine application.
( 2 )
$333.95
$183.95
On Sale
Adding more cfm of airflow through your carburetor is as easy as replacing your existing air cleaner with one of these K&N X-Stream airflow assemblies. They allow air to enter smoothly from the top, which helps to draw more air in from the sides. That means that you get more airflow headed down the carburetor or throttle body and into the combustion chamber. If you are a serious racer, or just need more airflow, then you need to get K&N air filters.
( 199 )
$209.99
—
$314.99
$167.99
—
$251.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
