Availability
On Sale
OEM Automotive Tools torque angle meters are used to gauge degree of turn when manufacturer calls for fasteners to be tightened further after the torque loads are applied. They are easy to read and are calibrated in degrees.
( 9 )
$18.99
$17.09
On Sale
Designed for high performance applications, these Grade 8 forged steel, heat-treated torque converter bolts from Mr. Gasket deliver extra strength. Their plated black finish resists rust and corrosion and they come complete with washers where needed.
( 7 )
$17.60
—
$18.40
$11.96
—
$15.84
On Sale
OEM Automotive Tools torque wrench adapter P/N 24208 is a special tool for use on Ford F250/F350 trucks and excursions (2003-07), plus Ford E-Series vans (2004-09)—including ambulance, law enforcement, and shuttle bus conversions using the 6.0L Power Stroke diesel engine. Additional notes: * Eliminates the need to remove the truck/van cab from the chassis to access the rear headbolts * Eliminates the need to remove the evaporator housing, saving two hours of time and the additional cost of refrigerant * Added during A/C recharging * Prevents damage to the rear heat shield * Use with OEM Tools 27309 3/4 in. drive torque wrench and OEM Tools 22398 18mm socket
( 1 )
$20.99
$18.89
On Sale
A must for all high performance applications, these Mr. Gasket torque converter nuts are forged from high-quality steel and are heat-treated for extra strength. These Grade 8 fasteners feature a black plated finish to help resist rust and corrosion. The kits come complete with lock washers where needed.
( 25 )
$17.23
$15.51
On Sale
Milwaukee TORQUE LOCK long nose locking pliers provide faster tool setup and more locking force. They feature forged alloy steel construction for maximum strength, rust resistance for longer life, hardened jaws for more gripping power, and a unique thumb screw that provides you with a more convenient geometry for better hand force and through-hole design to generate more torque with a screwdriver. Milwaukee TORQUE LOCK long nose locking pliers offer efficient one-handed control release, ergonomic handles with an anti-pinch design, and are available in several lengths.
Not Yet Reviewed
$18.97
$14.97
On Sale
Whiteline motor mount inserts are built to handle the demands of high torque and power output engines by limiting the amount of movement the engine and drivetrain will place upon the pitch stop. Utilizing low compliance bushing technology, this eliminates the slop, twisting, and shudder found in the OEM rubber bushings, allowing for a faster, positive, responsive feel of power delivery, both on and off the throttle. These motor mount inserts are available for both front and rear mount applications. Find the Whiteline parts to fit your vehicle and you'll notice the performance upgrade immediately!
( 1 )
$27.88
—
$31.88
$19.52
—
$22.32
On Sale
These Grade 5 hex head and socket head intake manifold bolts are bright zinc plated for protection and appearance. Kits include hardened flat washers for uniform torque and to prevent galling on aluminum intake manifolds.
( 14 )
$17.60
—
$22.94
$15.84
—
$20.65
On Sale
These bolts are made of a Grade 8 alloy and are heat-treated for extra strength. They feature a high hex head to prevent socket slippage and an extra-thick washer to allow for a more accurate, uniform torque.
( 8 )
$31.48
$20.46
On Sale
Get the biggest boost from a trusted brand that's been generating horsepower since 1978. NOS Octane Booster Race Formula maximizes power, protects your engine, and is sensor safe. The racing/off-road formula is ideal for use in forced-induction and high-compression engines. Benefits: * Boosts octane levels to increase horsepower, torque, and efficiency * Formulated to deter engine knock and ping; combat carbon build-up * Promotes clean fuel burn that is safe for oxygen sensors * Treats up to 20 gallons
Not Yet Reviewed
$14.99
$13.49
On Sale
These Mr. Gasket head bolt washers are designed to ensure equal torque ratings and reduce the chances of damaging your cylinder heads during installation. They are made of heat-treated steel that will provide you with the right amount of protection against leaks, cracking, or other troubling issues.
( 3 )
$25.69
$14.13
On Sale
Hurst transmission shifter gaskets provide a simple, no silicone installation. They use an aluminum carrier, silicone elastomer beading, and a rubber-coated binder to create a strong, long-lasting seal. Whether it's your daily driver, race car, or an off-road rig, these premium gasket replacements have you covered. Order the model designed to fit your transmission application. Additional details: * Requires no silicone to provide a simple and clean installation * Excellent torque retention to prevent possible leaks caused from loosened bolts * Aluminum carrier provides unmatched gasket strength, fit, and durability * Silicone elastomer beading provides a positive seal under severe temperatures and conditions * Rubber-coated sealing binder adds a third layer of protection and aids in the gasket's ability to seal—even with small imperfections of mating surfaces
Not Yet Reviewed
$23.55
$12.95
On Sale
OEM Automotive Tools offers axle hub locknut sockets to fit retaining nuts on a variety of applications, including GM and Toyota models. The 1/2 in. drive forged steel sockets are offered in 4- and 9-pin styles, allowing for easy removal and installation of specific retaining locknuts—without damage to the locknut. They also allow the specified torque to be reached to set proper preload.
Not Yet Reviewed
$18.99
$17.09
On Sale
OEM Automotive Tools 26-piece SAE and Metric hex key sets are made from professional-grade chrome vanadium steel. The manganese phosphate finish is more durable than black oxide and resistant to corrosion. Precision chamfered ball hex ends provide a 25 degree entry angle for increased grip. Additional notes: * Chrome vanadium construction for work in the toughest professional environments * 25 degree entry angle for better work near obstructions * Long arms provide increased torque and extra reach
Not Yet Reviewed
$19.99
$17.99
On Sale
Situated in a hard-to-reach spot, removing and replacing the Injector Pressure Regulator (IPR) can be a difficult task. OEM Automotive Tools IPR socket's specialized design provides easier access to the regulator, and features a cut-out to eliminate torque applied to the connector—reducing the occurrence of damage and allowing part re-use. Additional details: * Remove/replace IPR without damaging the connector * Applications: Ford 6.0L and other diesel engines * 3/8 in. drive
Not Yet Reviewed
$18.99
$17.09
On Sale
Milwaukee SHOCKWAVE impact drill and drive sets are built to deliver extreme durability for the most demanding jobsite applications. These bit sets include compact and impact magnetic bit holders, as well as sizes and quantities of Phillips, square, Torx, slotted, hex bits, and more. Additional product details: * Wear Guard Tip offers increased wear resistance that protects fit over the life of the bit * Custom Alloy76 steel is engineered to extend bit life * Up to 50 times more life vs. other impact bits * Shockzones are optimized in both length and width to absorb peak torque and prevent breaking * Precise-fit custom machined tip prevents stripping and reduces wobble * Laser-hardening at the tip creates an outer protective shield for improved wear resistance * Customized geometry and heat-treatment per tip type for best performance * Laser-etched sizes for easy identification * Designed for use with impact drivers and drill drivers
( 2 )
$44.99
$19.99
On Sale
OEM Automotive Tools 9-piece metric Tornado hex key sets are designed to provide you with 20 percent more torque strength. They are made of high-quality steel to ensure long-lasting durability and performance. These sets include a plastic indexed holder to keep them together and organized while not in use. If you need a great set of metric Tornado hex keys, trust OEM Automotive Tools.
Not Yet Reviewed
$20.99
$18.89
On Sale
OEM Automotive Tools ignition module wrenches are tools to help you with your distributor mounted ignition modules. They will remove 7/32 in. hex bolts, T-20 star drive head bolts, and can be used with a 1/2 in. wrench for added torque. They also feature a knurled grip for hand use. Maximize your work performance and your budget by choosing OEM Automotive Tools ignition module wrenches.
Not Yet Reviewed
$12.99
$11.69
On Sale
OEM Automotive Tools 9-piece SAE Tornado hex key sets are designed to provide you with 20 percent more torque strength. They are made of high-quality steel to ensure long-lasting durability and performance, and they include a plastic indexed holder to keep them together and help organize them when not in use. If you need a great set of SAE Tornado hex keys, OEM Automotive Tools has you covered.
Not Yet Reviewed
$20.99
$18.89
On Sale
OEM Automotive Tools axle wheel bearing sockets help you remove and install your truck's locknuts easier. These truck wheel bearing lockout wrenches feature high-grade steel construction for added strength. They are to be used with a hand ratchet or bar and extension torque wrench. Whether you are a professional or do-it-yourselfer, OEM Automotive Tools axle wheel bearing sockets work for you! They're available in a variety of socket sizes, types, and drives.
( 3 )
$18.99
—
$19.99
$17.09
—
$17.99
On Sale
Milwaukee folding hex key sets feature access zones on the handle and a key shelf that elevate the keys for easy access and selection. The handle is optimized for comfort and has long-lasting, high-contrast markings to help identify the right size key. Their full-metal body construction withstands high torque and extends the life of the tool in the toughest jobsite conditions. Milwaukee's hex keys rotate 270 degrees for greater access and torque in tight spaces and conveniently fold into the handle, making transportation and storage simple. These hex keys are offered in SAE and metric sets, as well as a combo package with both. Features: * Convenient handle size fits comfortably in tool pouch or pocket * Durable keys made with heat-treated alloy steel * Black oxide key finish resists rust and corrosion * Chamfered key ends for easier insertion into fasteners * Limited Lifetime Warranty * Nine SAE keys: -- 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, and 1/4 in. * Eight metric keys: -- 1.5, 2, 2.5, 3, 4, 5, 6, and 8mm
Not Yet Reviewed
$31.97
$19.97
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
