Availability
Showing In Stock Items. Show All 21 Items.
On Sale
Summit Racing™ mushroom cap push-button switches are large, lightweight, and provide a positive feel perfect for use as trans-brake, nitrous, or line lock buttons. Each assembly includes a spiral cord and is easy to mount in your desired location. The large mushroom caps are offered in several anodized billet aluminum options, either labeled or plain with a small Summit Racing™ "S" logo. They are also available made from durable plastic in several color options. Choose the push-button switches preferred for your vehicle.
( 16 )
$59.99
$53.99
On Sale
The Holley Sniper Transmission Controller (STC) is designed for common GM and Ford electronic 4-speed automatic transmissions. Three part numbers cover a complete range of applications—all Sniper EFI systems, Sniper 2 EFI-specific (M8 CAN connection), or a full standalone unit. The Sniper specific applications connect to your Sniper EFI system via CAN bus and are programmed through the existing Sniper 3.5 in. touch screen. No programming is available with PC computer software; however, the transmission functions can be data-logged and reviewed with Sniper PC software. The Standalone version includes a dedicated 3.5 in. touch screen and is primarily intended for carbureted engine combinations. GM and Ford 4-speed electronic overdrive transmissions are simple in operation. They have four speeds, with the top gear being an overdrive; and all have a lockup torque converter that eliminates any slippage when the lockup is applied. With a stock torque converter, the lockup should only be applied under light throttle conditions or excessive wear will occur. Upshifts, downshifts, and torque converter lockup are based on vehicle speed and throttle position (or optionally the MAP sensor) and are adjustable with the 3.5 in. touch screen. P/N 551-100: Replacement controller unit only P/N 551-101: Controller unit and power harness only P/N 551-102: Standalone kit for carbureted applications (includes power harness and hand-held programmer) P/N 551-103: Controller unit and power harness for use with Sniper 2 EFI systems Holley Sniper Transmission Controller features: * Adds electronic transmission control functionality to a Sniper 2 * Controls conventional electronic 4-speed transmission applications. GM 4L60/70/80E and Ford AODE and 4R70W - transmission specific harnesses sold separately: -- 558-405 – GM 4L60/70/80E -- 558-455 – 2009+ GM 4L60E -- 558-470 – 1998+ Ford 4R70W/4R75W -- 558-471 – 1992-1997 Ford AODE/4R70W * Tuning is performed through the 3.5 in. touch screen LCD (included with the Standalone version). Future compatibility will include 5 in. display and Bluetooth module * Tune upshifts, downshifts and WOT shift points * Full programmability of torque converter lockup * Full tuning of transmission line pressure (shift firmness) * Controls and layouts interface mirror Dominator and Terminator X MAX ECUs (except no paddle shift) * A MAP sensor is needed if using MAP for line pressure, which is usually only done with forced induction applications
( 2 )
$599.95
—
$728.95
$538.95
—
$655.95
On Sale
Do you want to move a column shifter to the floor of your project car and still retain that performance flavor? B&M Unimatic shifters are just the ticket! They look identical to a manual 4-speed shifter and, because of their cable-operated design, they can be easily installed. Like the B&M top line shifters, they include a neutral safety switch and a 5 ft. cable and a black plastic T-handle.
( 73 )
$299.95
$269.95
On Sale
Summit Racing™ Pro LS torque converters are designed for stock and modified LS-powered street vehicles that make up to 600 rwhp. They will furnish the extra stall speed that you need for quicker launches—and they pair well with our Summit™ Pro LS series camshafts. These computer-balanced torque converters feature: woven carbon lockup clutch lining; heavy-duty Torrington bearings; hand TIG welding; a new pilot, impeller hub, and turbine hub; and a custom stator. The torque converters are available in a variety of options; order the model recommended for your application.
( 35 )
$564.99
$509.99
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$517.95
—
$999.95
$465.95
—
$898.95
On Sale
B&M offers a full line of shift levers, cable brackets, and assorted linkage components everything you need for installing your B&M shifter. Or they can be used as replacements for lost or damaged parts. B&M parts are made to fit a wide variety of applications, so you're sure to find what you need.
( 187 )
$27.14
—
$131.95
$24.43
—
$118.75
On Sale
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$514.99
—
$932.99
$463.49
—
$839.69
On Sale
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,129.99
—
$1,802.99
$1,016.99
—
$1,622.69
On Sale
When you purchase a Hurst shifter for your vintage 3-speed transmission, you can take pride knowing that you're getting the very best parts for your classic. Hurst Mastershift 3-speed shifters provide precise gear selection and dependable long life. Popular as both a replacement for a worn-out factory floor shifter and also as a factory column-to-floor shift conversion, they are built to the same strict quality standards as Hurst's Competition/Plus 4-speed line. Choose the one for your application. All choices feature the classic chrome Hurst stick and white knob.
( 36 )
$378.95
—
$384.95
$341.05
—
$346.45
On Sale
Hays hydraulic release bearing kits will convert your favorite factory hydraulic-equipped car from a mechanical-style to hydraulic-style release bearing. Hays throwout bearings offer full adjustability, reduced pedal effort, and an easy set-up with most single or dual disc clutches. These kits are designed to fit various manual transmissions; order the model recommended for your vehicle and tranny application. Features and benefits include: * Improved clutch engagement and disengagement * Adjustable design provides increased travel over stock release bearing * Retrofit kits offer a simple way to add easy-effort hydraulic clutch actuation * Floating design bearing with large O-rings and PTFE backup rings to eliminate fluid leakage * Kits include bearing assembly, bearing retainer (where required), mounting hardware, adjustment shims, and -3 AN feed line
( 4 )
$299.95
$269.95
On Sale
Experience the benefits of a modern hydraulic clutch system—with improved drivability and reduced maintenance requirements—courtesy of Holley's new line of hydraulic clutch conversion kits. These throwout bearing conversion kits are designed specifically for Chevrolet Camaro and Pontiac Firebird models and allow for easy conversion from a mechanical clutch linkage to a modern hydraulic clutch system. They include all necessary components for a straightforward installation: clutch master cylinder, clutch pedal with pad, clutch rod assembly, master cylinder mount and reinforcement plate, master cylinder reservoir kit, and all required mounting hardware. Pedal ratios have been optimized for perfect pedal feel and full engagement of the clutch system. With so many engine and transmission combinations available, Holley has left it up to the installer to decide on which release (or throwout) bearing and hydraulic lines will be used. The Holley hydraulic conversion kit is engineered to fit each model perfectly, ensuring a trouble-free installation and optimal performance. Each kit offers several advantages over traditional mechanical clutch linkage systems. First and foremost, they provide a smoother and more precise clutch engagement, resulting in improved drivability and reduced wear and tear on clutch components. Additionally, the hydraulic system eliminates the need for periodic adjustments and maintenance that are typically required with mechanical clutch linkages and the use of many modern transmissions such as the T56, TR6060, Magnum, TKX, TKO, and classic 4-speeds. Order the conversion kit recommended for your vehicle.
( 1 )
$373.95
$336.55
On Sale
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 98 )
$188.99
$170.09
On Sale
Get a classic look without breaking the bank! The Scott Drake line of reproduction transmission fluid dipsticks is manufactured from quality materials, ensuring a proper fit.
( 18 )
$21.37
$19.23
On Sale
QuickTime offers bellhousing accessories, including these dowel pins, to help you to complete your project. They're made from quality material and are designed to correct the improper register bore alignment of bellhousing to your engine crankshaft center line.
( 4 )
$62.05
—
$83.35
$34.13
—
$45.84
On Sale
If you want a clutch that has some serious grab when you want it and is smooth when you don't, Hays Super Truck clutch kits are the answer. Built for your utility, off-road, and performance street trucks, their top-of-the-line components ensure extended service life at a price that you can afford. Hays Super Truck line is specifically designed for severe usage; every unit is built to withstand extreme conditions and overuse. Hays Super Truck clutch kits feature all-new parts, not remanufactured. Hays Super Truck kits can significantly extend the service life of clutches used in off-roading, towing, snow plowing, and performance street trucks. All clutch kits include a pressure plate, disc, throwout bearing, and alignment.
( 8 )
$499.95
$448.95
On Sale
Hays Street/Strip clutch kits are engineered and built as matched assemblies, using only top-quality new parts, to deliver maximum reliability and durability, as well as long-term dependability. They're available in both diaphragm and Borg & Beck styles, with sprung-hub clutch discs that have organic linings. Applications are available to fit a variety of cars and trucks aimed at street or street-and-strip use. These kits come complete with a pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). A pilot bushing is not included.
( 9 )
$599.95
—
$699.95
$384.95
—
$538.95
On Sale
Hurst Nitro Stick 2 shifter sticks are designed to bring the classic pistol grip well into the 21st Century. Machined from billet aluminum, they provide a positive grip for quick, solid shift action from any Hurst shifter using the 2-bolt handle attachment. They include a built-in 12 V momentary switch that you can use to control your line lock, nitrous system, or whatever suits your needs. The Hurst Nitro Stick 2 shifter sticks have a machined, thumb-operated cover that protects the activation button until needed, and a red LED provides illumination with the button cover open or closed.
( 8 )
$417.95
$375.95
On Sale
Hays classic clutch kits are great replacements for original equipment units. They're available for all three major clutch types, diaphragm, Borg & Beck, and Long, and feature clutch discs with sprung hubs and organic linings. There are applications for a huge range of domestic vehicles, including pony cars, muscle cars, classics, and pickups. Kits come complete with pressure plate, clutch disc, throwout bearing, and clutch-alignment tool (most kits). Pilot bushing not included.
( 11 )
$749.95
$673.95
On Sale
Hooker Blackheart transmission adapter plates are one of the most comprehensive engine swap components available. The adapter plates bolt directly to the OEM transmission mount location with the supplied hardware, and helps to eliminate the daunting task of figuring out correct drive line inclination and U-Joint operation angles. These transmission adapter plates are engineered to work together with Hooker Blackheart transmission crossmembers, engine mounting brackets, long tube headers, and exhaust systems (all sold separately) to provide an easy trouble-free Gen III Hemi engine swap in the B-Body Mopar Platform. Blackheart transmission adapter plate features: * Heavy-duty steel construction * Black powdercoated finish for lasting performance and good looks * Compact design allows better clearance then OEM crossmember * Easy bolt-on installation with included hardware
Not Yet Reviewed
$91.05
$50.08
On Sale
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$899.95
—
$1,649.95
$808.95
—
$1,483.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
