Availability
On Sale
Hooker Blackheart engine mount hardware kits include high-grade zinc coated bolts to complete the installation accurately. Order the fasteners recommended for your engine application.
( 4 )
$20.44
$18.40
On Sale
Forged from high-quality steel, and then heat-treated for maximum strength, these Mr. Gasket flexplate bolt kits are a must for all high-performance applications. They include lockwashers where required, and are black plated to resist rust and corrosion.
( 5 )
$22.94
$20.65
On Sale
These bolts are heat treated to Grade 8 specification and have a reduced profile hex head for clearance. Their black oxide finish resists rust and corrosion. Lock washers are included.
( 16 )
$18.31
—
$30.71
$16.48
—
$19.96
On Sale
Mr. Gasket pressure plate bolts are machined for strength and safety. They're heat-treated to Grade 8 specs to ensure strength—and black oxide plated to resist rust and corrosion. The Ultra-Seal specialty fasteners are available in a variety of thread sizes to fit dozens of Chevy and Ford engine applications from the 1950s and up.
( 11 )
$18.86
—
$18.95
$12.26
—
$12.32
On Sale
Designed for high performance applications, these Grade 8 forged steel, heat-treated torque converter bolts from Mr. Gasket deliver extra strength. Their plated black finish resists rust and corrosion and they come complete with washers where needed.
( 7 )
$17.60
—
$18.40
$11.96
—
$15.84
On Sale
Lakewood bellhousing bolts are for bellhousing to engine block and trans to bell attachment. These threaded hex head bolts are built from high-strength chromoly steel, and then black oxide coated for a tough, long-lasting finish.
( 4 )
$49.95
—
$52.95
$27.47
—
$29.12
On Sale
Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
( 184 )
$329.95
—
$675.95
$296.95
—
$607.95
On Sale
Hays Twister 3/4 Race performance torque converters are designed to be the perfect solution for your street/strip machine. Hays designed the Twister torque converters to be one step short of being a "Full Race" converter giving you the perfect combination of performance and affordability. Every torque converter is hand built, inspected and tested to ensure they meet the top of the line quality you expect. To ensure consistency and improve performance each converter is built for one transmission with one bolt pattern, meaning a lighter converter to maximize performance. High flow stators promote better cooling and heavy duty Torrington bearings are used to increase strength and durability. Not ready to go a "Full Race" converter, Hays is there for you with their Twister 3/4 Race torque converters.
( 11 )
$517.95
—
$999.95
$465.95
—
$898.95
On Sale
Holley transmission installation kits come complete with everything you need to bolt a TKX or TKO transmission to a 28- or 50-ounce externally balanced small-block Ford engine (depending on kit selected). Built with a mixture of best brands (such as Lakewood, Hays, and Mr. Gasket), the kits include: a roller pilot bearing, bellhousing with dust shield, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, and all hardware needed to install these components. Additional features and notes: * Lightweight cast aluminum bellhousing and steel block plate provide a factory-like installation and appearance * Billet steel, 24.5 lb., 157-tooth externally balanced flywheel for light weight and strength * 26-spline, 10.5 in. clutch disc offers superior clamping force for engines up to 500 hp * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * Adjustable Hydraulic Release Bearing offers reduced pedal effort and easy installation * Works with OE or MSD high-torque starters * All hardware included
( 2 )
$1,799.95
—
$2,149.95
$1,618.95
—
$1,933.95
On Sale
Lakewood safety bellhousings are designed for maximum performance and durability. They are cut on CNC 5 axis laser cutters rather than plasma cutters to improve finish quality, reduce heat damage and warpage from the plasma cutter, improve speed of manufacture, and make them all exactly the same. All bellhousings feature a scalloped plate on the bottom of the transmission surface made from G70 grade steel (70,000) psi which will help eliminate stripping the transmission bolts. The engine plates are made of H60 grade material and the bells are roto-brated after welding to relive any stresses created from the hydro forming, annealing, or welding process prior to machining and painting. The roto-brating process also closes the metal on the outer surface making them stronger. Ever wonder how the SFI tests bellhousings like these Lakewood safety bellhousings? First, they bolt the bellhousing to a machine with a cast iron flywheel and saw inside it. Then they spin the flywheel, causing the saw to cut through it until it explodes. If the bellhousing can contain the explosion, the bellhousing is approved. These safety bellhousings are a safeguard to minimize the destructive effects of such an explosion. Don't take unnecessary chances with your safety and the safety of innocent bystanders--Lakewood not only provides top-notch products, they also provide peace of mind.
( 47 )
$899.95
—
$1,299.95
$682.95
—
$878.95
On Sale
Rust, rocks, and road debris all take part in destroying differential covers—so Spicer Drivetrain Products introduces a line of axle-specific replacements. These kits include a new cover, plug, and installation bolts for an all-new look. They're available in a variety of materials and finishes for high strength and good looks. The differential covers are offered for the front or rear with select options for your particular application.
( 98 )
$188.99
—
$389.99
$170.09
—
$350.99
On Sale
Trail-Gear unit hubs are not just another aftermarket 1-ton unit hub that's been machined down and modified from an 8-lug to a 6-lug application. No, Trail-Gear designed these units for a specific application, so the hubs will bolt right onto Dana 60 or 9 in. housings that are set up for unit hubs. They're made to accommodate a 30- or a 35-spline axle shaft and use a 1/2 in.-20 threaded wheel stud with a 6 x 5.5 in. wheel bolt pattern. These are the same unit hubs that you will see on most competition buggies. They are ultra-strong and easy to replace. Simply unbolt the old one and bolt on the new replacement hub. This is a much simpler and stronger unit then the stock spindles being replaced. All unit hubs include integrated roll pin to prevent the spindle nut from coming loose.
( 1 )
$549.99
$467.49
On Sale
Auburn Gear pinion shaft service kits supply you with a new steel crosspin shaft and bolt. Maintain the performance of your Auburn Gear differentials with the correct service kits that offer the proper fit and function for your application.
( 3 )
$34.99
—
$166.99
$31.49
—
$150.29
On Sale
Hardware for your driveshaft--Trail-Gear bolts, nuts, and washers are the replacements you need. Providing the expected fit and function, these pieces are factory-level replacements. Make your driveshaft secure with Trail-Gear hardware.
( 1 )
$4.99
—
$5.99
$4.24
—
$5.09
On Sale
B&M flexplates are tough enough to handle severe applications and are ideal for 6,000+ rpm usage. They have precision-stamped centers and a rust-resistant, gold iridited finish. Some units are SFI-approved and are NHRA/IHRA-legal for all classes.
( 176 )
$169.95
—
$194.95
$152.95
—
$175.45
On Sale
Holley offers complete T56 transmission installation kits for a variety of engine applications. These kits come complete with everything you need to bolt a GM-style Tremec T-56 or Magnum transmission to almost any Gen III or Gen IV small block Chevrolet engines with a 6- or 8-bolt flywheel. Built with a mixture of Holley's best brands, including Lakewood and Hays, each kit includes a bellhousing, billet steel flywheel, clutch and pressure plate, hydraulic release bearing, roller pilot bearing, and all hardware needed to install these components. * Kit 319-510 is set up to be used with the 6-bolt flywheel LS engines, which are the majority of the Gen III and Gen IV engines produced before 2009 (LS1, LS2, LS3, LS6, LS7, LM7, LQ9, L33, and similar truck engines). * Kit 319-511 is set up to be used with the 8-bolt flywheel LS and Gen V LT engines that come after 2009 (LSA, LT1, LT4, L83, and similar truck engines). Product features: * Lightweight cast aluminum bellhousing and stamped steel dust cover provides factory-like installation and appearance * Billet steel flywheel for light weight (28 lbs.) and additional strength * Roller-style pilot bearing offers improved shifting by reducing parasitic drag and transmission wear * 26-spline, 12 in. organic sprung clutch offers superior clamping force and smooth engagement for engines up to 550 naturally aspirated horsepower (500 with power adder) * Adjustable hydraulic release bearing offers reduced pedal effort and easy installation * Works with original equipment or MSD high torque starters * All hardware included (flywheel, transmission, and engine connections)
Not Yet Reviewed
$1,449.95
$1,303.95
On Sale
Hays heavy-duty flexplates for high performance and competition engines are constructed from a thicker-than-stock steel plate. This enables them to withstand the stress of high-stall torque converters and high-rpm engines. While factory stock plates tend to crack around the crankshaft hub when punished under high-torque and rpm conditions, the thicker Hays flexplates can handle the force. These heavy-duty flexplates are supplied with a ring gear that is securely welded in place. All Hays heavy-duty flexplates are zinc-dichromate plated to resist corrosion and SFI-certified under specification 29.1.
( 63 )
$142.95
—
$349.95
$92.95
—
$314.95
On Sale
Hays Twister Full Race Torque Converters feature a custom-designed anti-balloon plate to stop any converter ballooning and swelling in racing situations. These torque converters are designed for use with a trans-brake and great for power adders such as nitrous, superchargers, and turbos. They're available with various RPM stall speed offerings to accommodate any mixture of modifications—including higher compression ratios, aftermarket camshafts, aftermarket cylinder heads, lower gear ratios, and vehicle weight loss. Additional product features: * All Full Race Series converters are built, tested, and proven to support up to 1,000 hp * Designed to handle the extreme shock and abuse of trans-brakes, nitrous oxide, superchargers, and turbochargers * State-of-the-art spray welding process is used in select areas. Spray welding provides clean, strong, and consistent fusion while also increasing strength through hardening from higher process temperature * Each converter is hand-built and inspected in every step of assembly to ensure top-of-the-line quality * All Hays torque converters are internally welded, compared to brazing. Testing has shown welding provides longer converter life while also enhancing consistency * Heavy-duty Torrington bearings are used for greater strength and durability * Stators are chosen with high-flow vents and channels to promote cooling in heat-producing higher horsepower applications * Increased horsepower and acceleration due to a weight-saving, one-application design. Almost all Hays converters are built for one application to reduce weight, compared to a multi-bolt pattern converter * Full Race Series torque converters are offered in several different stall speeds for popular automatic transmissions.
( 1 )
$899.95
—
$1,649.95
$808.95
—
$1,483.95
On Sale
Service your Auburn limited-slip differential with their spider gear kits. These pinion gear kits offer the convenience of receiving everything you need to restore optimal rear wheel performance to your vehicle.
( 1 )
$69.99
—
$186.99
$62.99
—
$168.29
On Sale
Mr. Gasket's chrome differential covers are the perfect addition to your axle. They're made of heavy-gauge steel for durability and excellent gasket sealing. The covers all get a high-luster chrome finish and include a gasket and mounting bolts.
( 14 )
$75.65
—
$87.15
$47.93
—
$74.85
On Sale
Auburn Gear Select-A-Loc differentials maximize your vehicle's traction with on-the-go system engage. These electronically controlled traction-enhancing differentials are selectable lockers offering the traction control of a limited-slip differential and a full-locking differential--all in one! When locker switch is off, the clutch pack activates the limited-slip mode. As torque increases, the separating forces within the differential gears increase, causing the clutch pack to be compressed, in turn providing bias torque to the highest traction wheel. When the locker switch is turned on, electronic current is sent to the electromagnetic coil which locks the axles together. Auburn Gear Select-A-Loc lockers feature a unique cone-clutch design with gearing made from aircraft-quality 9310 heat-treated billet steel for tough-as-nails strength. The lockers operate quietly without any shift fork or pins to line up to change the locker mode. With a limited-slip mode for on/off-road excitement and a true locker mode for the quarter-mile or nasty off-road terrain, Auburn Gear Select-A-Loc differentials deliver superior traction capabilities on the street, at the track, or off-road.
( 10 )
$1,089.99
—
$1,802.99
$980.99
—
$1,622.69
On Sale
B&M differential covers are strong and cool! Cast and machined from premium aluminum alloy, they feature heavy-duty structural cooling fins, a larger fluid capacity, and high-strength magnetic drain plugs that aid in catching ferrous metal particles. B&M differential covers add some strength with extra cooling ability to your rear end.
( 151 )
$293.65
—
$532.95
$219.95
—
$478.95
On Sale
Get your LS engine installed properly using one of these Hooker transmission crossmember extension brackets. They are manufactured from quality materials and bolt in place for an easy installation. The brackets are available for different types of transmissions, so they're sure to have you covered.
( 4 )
$32.95
—
$49.95
$18.12
—
$27.47
On Sale
Built to exceed your expectations, Auburn Gear provides a variety of Grip-N-Loc differentials to match most makes and models. They build upon exclusive technologies previously found in their limited slip line—but with more robust construction and materials to satisfy the extreme demands of serious drivers. If you push the limits of performance and traction, perhaps through competition, or simply through extreme weather driving, Auburn Gear Grip-N-Loc differentials offer the best options to fit your application! More product features include: * Upgrades your vehicle for the safe transfer of increased power/torque across the axle * Case material is up to 50 percent stronger than OE cases * Advanced cone clutch technology provides a 25 percent increase in bias ratio/increased traction * Hardened-steel gear materials for confidence in extreme conditions * 2-year warranty
( 19 )
$529.99
—
$702.99
$476.99
—
$632.69
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
