Availability
On Sale
Getting accurate readings of your Jeep's oil level is important to keep your engine running smoothly. Crown Automotive oil level sensors are direct replacements for faulty units. If you are being alerted to a low engine oil level but a check of the dipstick tells you otherwise, the sensor may need replaced. Do the job with quality sensors from Crown.
Not Yet Reviewed
$35.99
$32.39
On Sale
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
$97.19
On Sale
AEM Electronics fluid temperature sensor kits allow you to monitor the temperature of your water, oil, or coolant. Several styles are available and offer sensor, connector, and pins. Select the AEM fluid temperature sensor kit needed for your application. Features of kits available: 30-2011: * Temperature sensor, 3/8 in.-18 NPT, aluminum bung, waterproof connector, pins and wire seals * Operating temperature: -40 to 135 degrees C/-40 to 275 degrees F 30-2012: * Temperature sensor, 1/8 in. NPT, waterproof connector kit and pins * Operating temperature: -40 to 200 degrees C/-40 to 392 degrees F 30-2013: * Temperature sensor, 1/8 in. NPT, High performance DTM-style connector, aluminum bung, connector, and pins * Operating temperature: -20 to 150 degrees C/-4 to 302 degrees F
( 6 )
$54.45
—
$70.79
$49.05
—
$63.75
On Sale
MSD Pro-Billet oil plugs keep your front drive distributor running like new. Their front drive distributors brought the need for distributor plugs. These plugs are made of billet aluminum and feature a slip collar to ensure correct installation depth.
( 3 )
$299.95
$269.95
On Sale
MSD Blaster coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets.
( 443 )
$54.45
—
$90.85
$49.05
—
$59.05
On Sale
MSD Blaster 3 coils put out 45,000 V, which are 15,000 more than stock. They also have an oil-filled metal canister and will fit stock mounting brackets. The coils have a unique Power Tower that is twice as high as a standard tower. The extra distance prevents secondary arcing between the primary terminals and the coil center. The HEI-style boot and terminal keep the coil wire secure.
( 65 )
$65.35
$58.85
On Sale
These Promaster Classic series ignition coils from Mallory are designed to meet today's specialized ignition requirements. These coils feature a faster rise time and increased spark duration (compared to stock) to increase performance. They have a glass-filled polyester case and oil-filled construction to ensure a long life and no energy loss from arcing. This series also offers better wire retention with a spark plug type secondary post, and brass contact terminals.
( 43 )
$199.95
$179.95
On Sale
These canister-style ignition coils from Mallory feature an oil-filled design and an arc-resistant alkyd top for superior performance, insulation, and cooling. These universal coils are available for several different distributor types, and work even better when used with your other Mallory components.
( 52 )
$83.35
$75.05
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$259.95
$168.95
On Sale
Crown Automotive coolant temperature sensors are a top-priority replacement for any vehicle. They're constructed out of high-quality materials and provide you with accurate coolant temperature data to the engine management system. When your vehicle's sensor is malfunctioning, you may experience inaccurate gauge functions, an overheating engine, internal engine damage, or excessive fuel consumption. All of these major issues can be solved with one simple little coolant temperature sensor from Crown Automotive.
( 10 )
$13.99
$12.59
On Sale
FiTech Go-Spark ignition coils will help complete your LS EFI swap or even update your modern muscle car with a fresh jolt of energy. These coils were developed to deliver optimum output with a quality fit and reliability. They bolt in place of the originals—and accept the sealed, locking connector and plug wire terminal for a simple upgrade. If you're looking for a little more dazzle under your hood, choose a model with a built-in LED that flashes when the coil is firing. All coils are sold individually or in a set.
( 1 )
$49.00
$41.65
On Sale
FiTech Go Spark round mounting brackets are designed for oil-filled ignition coils that measure between 2 1/8 in. and 2 1/4 in. in diameter. They provide a secure and stable mounting solution, often used with ignition systems and fuel injection distributors. Fabricated from steel with a chrome finish, the brackets include mounting hardware (a bolt and nut). These parts meet or exceed OE quality standards.
Not Yet Reviewed
$10.00
$8.50
On Sale
Fleece Performance offers wiring pigtails and replacement connectors for a wide range of vehicles—including many Dodge, Chevrolet, GMC, Ford, and Ram models from the 1990s and up. These replacement parts are ideal for sensors, starter solenoids, cooling fans, and other components under the hood. Fully automated in-house wire cutting and terminal crimping ensure you get the highest quality connectors and pigtails to get your car or truck back on the road quickly. Order the model that corresponds to your electrical application.
( 3 )
$18.99
—
$32.99
$16.14
—
$28.04
On Sale
ACCEL SuperStock coils are excellent high-performance coils. They're designed with optimized low resistance and a high turns ratio, for higher energy output. This also results in quicker starts, improved throttle response, and more high-rpm power.
( 93 )
$45.98
—
$79.09
$34.49
—
$71.15
On Sale
ACCEL Super Coils are engineered for a faster rise time and a longer spark duration. They produce higher spark energy for increased performance. These coils are available for a wide variety of specific engine applications. Order the set designed for your make and model.
( 805 )
$114.95
$103.45
On Sale
Vehicle maintenance is a necessity—and Crown Automotive tune-up kits are must-haves. Combining the most frequently changed performance parts, these kits will help you extend the life of your ride and provide you with a better driving experience. Air filters, oil filters, and spark plugs are included, as well as other replacement parts (depending on the application) to complete the job. Crown specializes in components for Jeep and Mopar-related vehicles. Match up your year/make/model with the correct tune-up kit for precise fitment.
( 2 )
$41.99
—
$157.99
$37.79
—
$142.19
On Sale
Add some spark to your ride with Professional Products Powerfire II ignition coils. They are ideal for street performance engines running up to 6,500 rpm. Each coil is supplied with a mounting bracket and you are given the choice between a red or black case to help match your engine bay. Stop relying on a weak, stock coil when you can upgrade to Professional Products Powerfire II ignition coils.
( 1 )
$20.99
$18.89
On Sale
MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Coil bracket -- Uses a bolt/nut combination instead of the easily stripped self-tapping screw * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector
( 2 )
$699.95
—
$749.95
$628.95
—
$673.95
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$49.95
—
$299.95
$33.93
—
$269.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 241 )
$424.95
—
$641.95
$302.21
—
$538.95
On Sale
high-quality MSD bronze distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5% nickel. This material creates high strength gear teeth which are less prone to wear when used with high volume oil pumps but does not harm the cam like steel or iron gears. With the proper cam and gear combination you'll be sure to have flawless, extended performance in the harshest conditions.
( 93 )
$89.35
—
$131.95
$80.45
—
$118.75
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$482.95
$433.95
On Sale
MSD Pro-Billet distributor plugs with cam sync are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a Hall-effect cam sync signal needed for the EFI system to reference the #1 cylinder. For wet sump applications, the plug also drives the oil pump. MSD cam syncs are plug-and-play with Holley EFI systems, and can easily interface with most aftermarket EFI systems. MSD cam sync plugs feature: * Built-in LED makes set-up and indexing quick and easy * Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal * CNC-machined billet housing with black anodized cap provides good looks and excellent durability * Available with cast melonized, steel, or bronze distributor gear, depending on the application * Chevrolet version is supplied with an adjustable slip collar for blocks with a non-standard deck height
( 8 )
$349.95
—
$435.95
$314.95
—
$391.95
On Sale
Holley HP EFI ECU and harness kits allow you to manage automotive functions—like the fuel and ignition of your engine, along with controlling nitrous, boost, or water/methanol. Select the model with options needed for your vehicle application. (Note: some models are engine-specific.) Features and notes: * Eight sequentially driven 8:2 peak and hold injector drivers capable of driving up to 16 low or high-impedance injectors are standard * 8-channel distributorless ignition (DIS) outputs capable of directly driving "smart" ignition coils or Holley DIS coils * Integrated, single-channel wideband oxygen sensor control. Works with NTK or Bosch sensors. More channels can be added via CAN bus. * Internal data-logging is standard, with a huge 2GB of memory * 4-stage progressive nitrous control * Turbo boost control * Integrated water/methanol injection control * Self-tuning fuel table strategy greatly simplifies tuning process * Individual cylinder fuel and spark control allow you to unlock your engine's potential * Compatible with 4, 6, and 8-cylinder engines * Unique lbs./hr.-based fueling strategy greatly simplifies tuning * Advanced idle, closed loop, and enrichment strategies allow for very stable operation * Fully potted and can be mounted in the engine compartment or interior * Sealed automotive and marine-grade connectors * Allows for use of common OEM sensors, as well as customer sensor calibration input * Ignition plug-and-play with GM 24x and 58x LSx engines, GM HEI, Ford TFI, magnetic, and hall effect trigger, and other ignition systems * 1-5 bar MAP sensor capability * 2-channel knock control sensor inputs for both one and 2-wire knock sensors * Dedicated fuel and oil pressure inputs * Control both stepper and PWM idle air control (IAC) motors * Speed density, Alpha-N, or combination fueling strategies * Four programmable high or low pulse width modulated (PWM) outputs and four fully configurable inputs can be configured for use * Lean or rich safety cutoff
( 25 )
$1,999.95
—
$2,649.95
$1,798.95
—
$2,383.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
