Availability
On Sale
If your racecar, Corvette, or race Corvette requires a distributor with a mechanical tach drive, these Pro-Billet Tach Drive distributors from MSD are what you need. Their race-proven magnetic pickup delivers precise trigger signals to your MSD ignition every time one of the reluctor's precision paddles pass by. This reluctor assembly is connected to an oversized steel shaft for increased strength and endurance, and is responsible for triggering the magnetic pickup. Inside the stout billet 6061-T6 aluminum housing, a sealed ball bearing and long sintered bushing guide the 0.500 in. steel shaft for high-rpm accuracy. Just above the reluctor is an adjustable mechanical advance assembly that lets you tailor a timing curve to match your engine's needs. This assembly is TIG welded for strength, and features chromoly weights and nylon pads to ensure smooth advance as the rpm increases. Corvette models feature a vacuum advance, and are available with or without an adjustable slip collar for engines that have had the deck height modified or use exotic intake manifolds. The distributors also feature a Rynite base. The tach drive assembly has a grease fitting for lubrication, is compact to clear the firewall and linkage, and can be repositioned easily to fit different applications. These distributors require the use of a separate ignition box, such as an MSD 6, 7, 8, or 10 Series ignition.
( 10 )
$669.95
$601.95
On Sale
PerTronix Flame-Thrower Ceramic Hi-Temp universal spark plug boots protect against direct heat, withstanding up to 2,000 degrees F. These universal boots provide the very best protection for applications with tight fitting headers or exhaust manifolds, and they fit typical 8mm spark plug wires. Pertronix offers the Flame-Thrower Ceramic Hi-Temp boots in several boot angle configurations individually and in sets of 8 to retrofit an entire spark plug wire set. Each kit includes pure silicone plug(s), wire bushing(s), spark plug terminal(s), and high-temperature ceramic boot(s).
( 36 )
$17.25
—
$123.60
$15.52
—
$111.24
On Sale
Why settle for a generic looking set of battery cables at the local parts store—when you can equip your classic muscle car with authentic replicas from Scott Drake! The accurate fitting terminals and boots not only transmit the power you need, they'll also look nice anytime you open the hood at a car show. The cables are available in multiple versions: * Economy for daily drivers, but at half the cost * Concours, which features the iconic "FoMoCo" logo * Heavy-Duty, with a larger gauge wire to prevent excessive draw
( 8 )
$74.95
$67.45
On Sale
Taylor brass compression battery cable terminal kits are designed for a fast and easy install. Simply strip your battery cable, apply the fitting, and screw it into the battery terminal. These brass terminals and compression fittings are cadmium plated for corrosion resistance.
( 46 )
$17.25
—
$40.20
$15.52
—
$36.18
On Sale
You have an alternative choice for flex fuel sensors--AEM Electronics ethanol content sensors. While most gas stations label their flex fuel as E85 (85 percent ethanol/15 percent gasoline), the actual content could be quite different. AEM sensors deliver the ability to determine the composition of the fuel blend pumped into your vehicle at any given time. They measure content percentage and fuel temperature allowing users with programmable engine management systems (capable of tuning for flex fuel) the ability to optimize their engine's tuning calibration for fuel ethanol content. These kits include plug and pins for electrical connections, as well as either -6AN or hose barb fittings (depending on kit chosen) for integration into the fuel system.
( 4 )
$222.95
—
$328.95
$200.65
—
$296.05
On Sale
Take control of your engine a Holley Terminator LS plug-and-play multi-port engine management system. They include all the necessary parts to control the fuel, spark, 4L60/4L80E or 4L60E/4L80E transmission, the vehicle's drive-by-wire, or some combination of those (depending on the application) on your stock or mild LS. Order the model recommended for your year/make and engine application. Holley Terminator LS plug-and-play multi-port systems include: * Terminator EFI ECU * Terminator hand-held controller with 3.5 in. full-color touch screen * Main power harness * Main engine harness * Injector harness * Other harnesses as required by the application * Oxygen sensor with fitting
( 1 )
$2,749.95
—
$4,349.95
$2,473.95
—
$3,913.95
On Sale
AEM exhaust backpressure install kits are specifically designed to give accurate backpressure readings, without sacrificing sensor longevity due to extreme operating conditions. Designed for use with their 4-channel wideband UEGO controller, you get precision readings for ultimate performance using AEM exhaust backpressure install kits. Kits include: * Stainless steel 100 psig pressure sensor * Stainless steel standoff tube with fittings * Stainless steel braided hose * Weld-on/threaded bung.
( 1 )
$368.95
$332.05
On Sale
Summit Racing™ offers ignition tune-up kit Pro Packs for countless vehicles from the 1950s and up. Depending on your application, the kits may include a distributor, ignition coil, spark plugs and wires, ignition box and module, rotor, and many other options. Get the most from your ignition and engine; choose the ignition tune-up kit Pro Pack recommended for your car or truck.
( 51 )
$548.62
—
$1,025.54
$516.28
—
$963.00
On Sale
Keep track of temperature levels with AEM Electronics air inlet temperature sensor kits. They include an aluminum weld-in bung, connector plug, and flying lead and sensor to complete the installation. Monitoring engine functions can stop a problem early--pick up AEM Electronics air inlet temperature sensor kits for trouble-free performance.
( 8 )
$67.55
—
$70.79
$60.75
—
$63.75
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
