Availability
Showing In Stock Items. Show All 62 Items.
On Sale
These Scott Drake battery hold-down J-bolt kits include the correct length J-bolts and nuts to properly hold the battery down in place. They are available in your choice of standard steel or durable stainless steel.
( 30 )
$18.99
—
$23.75
$17.09
—
$21.38
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 241 )
$424.95
—
$641.95
$302.21
—
$538.95
On Sale
Get your race car going faster with MSD DynaForce high-speed starters! With 25 percent more cranking speed and extreme durability, they will reliably start your stubborn race engine. Designed for engines requiring higher cranking rpm to start, these starters offer 3.73:1 gear reduction. They also feature a heavy-duty, high-temp solenoid for 12 to 16 V systems, a plated disc and contacts to reduce arcing, and an adjustable billet aluminum mounting block. When you need higher cranking speed at the track for your blown alcohol engine or magneto ignition, MSD DynaForce high-speed starters will get you movin'--fast!
( 14 )
$599.95
—
$649.95
$538.95
—
$583.95
On Sale
Keep your wires separated with Mr. Gasket wire looms and divider kits. Available in a variety of styles, materials, and finishes, these wire dividers fit 7 and 8mm wires with ease. Whether you're at the strip, cruising the streets, or sitting at a car show, Mr. Gasket wire looms and divider kits will be sure to keep your wires away from your headers and the engine compartment looking clean.
( 39 )
$15.07
—
$83.05
$9.32
—
$74.75
On Sale
Since you're installing that new distributor, you'll need to hold it down with something. Why not use one of Mr. Gasket's hold-down distributor clamps? Made from heavy gauge steel, these clamps are the perfect way to dress up the engine compartment.
( 27 )
$11.44
$10.30
On Sale
These MSD Ford Blaster Coil-on-Plug ignition coil packs feature a patented winding design and direct bolt-in replacement. The improved spark energy and voltage of the coil packs, combined with their reliability, have made them a favorite of performance enthusiasts. They are designed as direct bolt-in replacement coils for many SOHC Ford V8 modular engines. The housing and installation are the same as the factory coils, but that is where the similarity ends. Inside the MSD coil packs, engineers used better quality materials to assemble the primary and secondary windings. The MSD Ford Blaster Coil-on-Plug ignition coil packs take the spark energy right out of the coil and put it across the plug gap to improve the combustion and output of the engine.
( 364 )
$59.25
—
$522.95
$38.51
—
$469.95
On Sale
Superchips 3.6L V6 coil packs can yield impressive results when used to replace or upgrade your older, worn-out ignition coils. Designed for the 3.6L V6 engine found in thousands of Chrysler, Jeep, Dodge, and Ram vehicles, these coils improve cold starts and provide a smoother running engine. Available in six packs, or individual replacements, Superchips 3.6L V6 coil packs are a surefire way to put some new spark in your ride while adding some underhood flair! Other product features include: * Increased spark energy * Optimized cores and windings * Epoxy-filled housings * Simple bolt-on upgrade * Yellow housing for increased aesthetics.
( 3 )
$224.95
$202.45
On Sale
Scott Drake offers battery hold-down clamps for a wide range of vehicles from the 1960s and '70s. They're available in a variety of styles, materials, and finishes. Add a fresh look to your battery—order the model designed for your application.
( 15 )
$10.65
$9.59
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 404 )
$380.95
—
$825.95
$302.95
—
$742.95
On Sale
MSD Pro-Billet ignition bundles contain performance components to breathe new life into your engine. Available with different Pro-Billet distributors; select the kit with the distributor for your engine. Contents and features: * Pro Billet distributor -- CNC machined billet aluminum housing and billet aluminum base -- Polished steel shaft is QPQ coated and guided by a sealed ball bearing -- Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range * Blaster 2 coil -- Improved spark output -- Alkyd tower with high dielectric properties is less prone to carbon tracking -- 100:1 turns ratio and lower primary resistance produce high-voltage output -- Metal canister is filled with a premium grade oil for cooling * Coil bracket -- Uses a bolt/nut combination instead of the easily stripped self-tapping screw * Red MSD 6 AL Digital ignition box -- High output with 530 volts and 135mJ of spark energy -- Set an rpm limit with two rotary dials in 100 rpm increments -- Built-in LED for system checks -- All wires exit through a locked, sealed connector
( 2 )
$699.95
—
$749.95
$628.95
—
$673.95
On Sale
When it comes to late model performance parts, nothing beats bolt-on and direct connection components—especially when they improve performance like these new replacement MSD Blaster ignition coils. They're designed with improved materials and windings to produce a stronger spark. This improved spark helps burn the fuel mixture more efficiently, resulting in smooth idle and heightened mid-range rpm power. Choose the OEM replacement designed for your year/make/model application.
( 624 )
$65.85
—
$749.95
$44.27
—
$673.95
On Sale
Finally, all-out performance distributors to replace the OEM GM LT1 Optisparks--MSD's Pro-Billet LT1 distributors. They feature a precision-machined billet aluminum housing that fits in place of the factory piece, a new pickup assembly, a trick timing adjustment mechanism, and a new MSD distributor cap and rotor. The pickup is an advanced optical encoder that has proven to be very reliable and stable through extreme rpm and conditions. The rotor is bolted to a drive assembly that is indexed to the shaft, and is stabilized through the use of a large ball bearing assembly. The distributors use an adjustment screw to advance or retard the timing by up to 5 degrees.
( 64 )
$799.95
$718.95
On Sale
MSD Pro-Billet Ready-to-Run EFI distributors are the perfect upgrade when you start making serious power with your EFI Ford or Chevy. They use a stock-style trigger pickup and come with plug-in connectors. Installation is simple by removing the stock distributor, then plugging in and bolting the new one in place! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. These distributors will smooth out the engine's idle, improve starting, and perform at a much higher rpm. Their housings are machined from billet aluminum, using state-of-the-art CNC mills and lathes. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing for accuracy through the entire rpm range. Chevy models also feature an extra-long sintered bushing at the bottom and an extra oil tract machined into the bottom of the housing for improved lubrication. The tract delivers oil directly to the cam and distributor gears. All of the shafts receive a QPQ coating for low friction wear, and resistance against corrosion from humidity and ozone buildup. The Chevrolet models have also been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.
( 93 )
$499.95
—
$632.95
$448.95
—
$568.95
On Sale
MSD Blaster coils give your GM maximum voltage output! With windings and construction similar to MSD's Blaster 2 coils, these have an increased turns ratio, plus lower primary resistance than your stock coils. The Blasters will work with stock GM coil ignition systems, as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your GM ignition system? Just bolt in one of these MSD Blaster Coils.
( 87 )
$78.15
—
$330.95
$70.35
—
$297.85
On Sale
MSD Blaster TFI coils powers up your Ford ignition system. With windings and construction similar to MSD's Blaster 2 coils, these coils have an increased turns ratio, plus lower primary resistance than your stock coil. MSD Blaster TFI coils will work with stock TFI ignition systems as well as MSD-equipped cars and trucks. Looking to get a little more output voltage from your Ford ignition system? Just bolt in one of these MSD Blaster TFI coils.
( 144 )
$78.15
$70.35
On Sale
MSD Smart Coils were developed to produce more spark energy while consuming less power without sacrificing voltage output. This means you get hotter spark at the plug to burn the maximum amount of fuel in each cylinder while using less power from your electrical system. Smart Coils are compatible with popular aftermarket electronic fuel injection systems and will run on traditional 12 V or 16 V electrical systems found in race applications. The coils feature unique elongated mounting holes to accommodate popular mounting brackets or allow them to bolt in place of an LS coil with 72mm bolt spacing.
( 1 )
$127.95
—
$1,249.95
$92.59
—
$1,123.95
On Sale
MSD Pro-Billet Ready-to-Run marine distributors are the perfect upgrade for boats that are relying on worn-out breaker points or weak ignition systems. These distributors feature a powerful ignition module built into the billet aluminum housing. That means no extra ignition box is needed! This module produces a stout inductive spark that will improve combustion of the fuel mixture for better drivability. Beneath the durable bolt-down injection-molded cap, a maintenance-free magnetic pickup produces accurate trigger signals, while an oversized shaft is guided by a sealed ball bearing. An easy-to-adjust mechanical advance allows you to custom-tailor a timing curve to match your application. Their Ready-to-Run design makes installation a breeze. Simply drop one in the engine, connect three wires—and you're ready-to-run across the lake! All distributors are equipped with flame arrestor holes in their CNC-machined aluminum housings, and are supplied with a cap, rotor, gear, and weathertight wiring harness.
( 16 )
$699.95
—
$799.95
$628.95
—
$718.95
On Sale
FiTech Go-Spark ignition coils will help complete your LS EFI swap or even update your modern muscle car with a fresh jolt of energy. These coils were developed to deliver optimum output with a quality fit and reliability. They bolt in place of the originals—and accept the sealed, locking connector and plug wire terminal for a simple upgrade. If you're looking for a little more dazzle under your hood, choose a model with a built-in LED that flashes when the coil is firing. All coils are sold individually or in a set.
( 1 )
$45.00
—
$369.00
$38.25
—
$313.65
On Sale
MSD recognized the need for a true marine performance distributor and built these Pro-Billet marine distributors to answer this need. Marine environments place rigorous demands on every component of the ignition system, especially the distributor. The combination of water spray, salt exposure, full throttle acceleration, and harsh vibrations all take their toll. The housing is CNC-machined from billet 6061-T6 aluminum, creating a housing with no porosity or weak areas. Internally, a Tuftride coated steel shaft is guided by a sealed ball bearing and an extra-long sintered bushing for high-speed stability and endurance. Each distributor uses MSD's race-proven magnetic pickup to trigger the ignition control. The pickup receives its signal through a precision-manufactured reluctor that is attached to the shaft. The mechanical advance assembly receives a QPQ plating for long lasting resistance to corrosion in marine environments. Their mechanical advance assembly is easily adjustable, so you can dial-in an ignition curve to match your boat's application. Three additional sets of advance springs and stop bushings are included with detailed instructions, making adjustments easy to perform and understand. The distributor cap is bolted and sealed to the aluminum base, and has two flame arrestor holes with brass screens machined into the base of the distributor. This design works to prevent ignition of gas fumes that may build up in the engine compartment. A special weathertight connector is supplied to provide a positive lock and water-resistant connection. This heavy-duty connector will withstand high temperatures and water, and plugs directly into the MSD 6M-2 or 7M-2 ignitions. The distributors come complete with a high-quality, bolt-down alkyd cap and MSD's racing rotor. These high-quality distributors have been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard. They require the use of a separate ignition box.
( 4 )
$632.95
$568.95
On Sale
MSD Pro-Caps are larger than standard caps, to handle more voltage. Each terminal is spaced exactly 2 in. apart to deliver spark to the right plugs with less spark scatter. The caps are molded from DuPont Rynite for maximum strength, and the rotors feature thick vanes, deep skirts, and a dual screw-down rotor tip for long life. The Pro-Cap bases bolt on to most MSD distributors.
( 4 )
$99.95
—
$112.95
$89.95
—
$101.65
On Sale
MSD Pro 600 CDI ignition high-output coils developed these powerful coils to provide unrivaled spark energy and dependability. The best choice to equip your Pro 600 CDI, they have the highest current and voltage available in a small compact design, creating over 200 millijoules of spark energy and leaving no horsepower untapped. Along with the unrivaled output of your Pro 600 CDI, MSD high-output coils, everything from Pro-mod's to pulling trucks can perform at a whole new level! Features and benefits: * Designed for extreme racing for the Pro 600 Capacitive Discharge Ignition * Capable of up to 50,000 V to ignite extreme cylinder pressures * Over 200 millijoules of spark energy makes them ideal for use with methanol, ethanol, and E85, as well as forced induction and power adder combinations * Supplied with hardware to mount horizontal or vertical position * Coils are designed to be mounted on Holley's LS valve covers, or OE LS passenger car coil brackets using 72mm bolt spacing * HEI-style secondary tower for secure coil wire connection
Not Yet Reviewed
$101.95
—
$899.95
$76.95
—
$808.95
On Sale
MSD's Pro-Billet front drive distributors are the solution for race engines that don't have room for a standard distributor, due to firewall clearance or intake combinations. They're run by a wide 9mm belt that is driven by a pulley installed on the camshaft. The belt is wider than any other drive assembly for increased strength and durability. The distributor head is CNC-machined from billet aluminum and is secured to a stout billet aluminum bracket for strength. This system is an extremely accurate way to distribute the spark energy in harsh racing conditions. The distributors have a built-in belt adjustment feature for easy tension adjustments, and a band clamp mount for easy rotor phasing adjustments. They include MSD's Pro-Cap that is injection-molded from Dupont Rynite material for high dielectric strength, and the five in. diameter ensures accurate spark delivery. The distributors are supplied with mounting bolts, a cam pulley, hardware, and a drive belt. They must be used with a Jesel camshaft belt drive kit and an MSD Flying Magnet crank trigger.
Not Yet Reviewed
$1,149.95
$1,033.95
On Sale
FiTech Go Spark round mounting brackets are designed for oil-filled ignition coils that measure between 2 1/8 in. and 2 1/4 in. in diameter. They provide a secure and stable mounting solution, often used with ignition systems and fuel injection distributors. Fabricated from steel with a chrome finish, the brackets include mounting hardware (a bolt and nut). These parts meet or exceed OE quality standards.
Not Yet Reviewed
$10.00
$8.50
On Sale
OEM Automotive Tools shop press pin sets are capable of use with presses up to 20 tons. This replacement set includes eight press pins, 2-20 ton capacity, with ram adapter. All pins feature a yellow phosphate finish for added corrosion resistance. They are suitable for use with shop presses that have a female Ram assembly diameter of 25mm and are secured with a bolt.
Not Yet Reviewed
$179.00
$161.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
