Availability
Showing In Stock Items. Show All 25 Items.
On Sale
Maintain optimum idle and rpm with Holley throttle position sensors. They are available for standard Holley carburetors and Holley's Pro-Jection. The sensors use quick-connect Weatherpack connectors, so installation is a snap.
( 14 )
$87.55
$78.75
On Sale
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, that could result in premature failure. Crown Automotive oil pump drive assemblies (OPDA) feature redesigned internals to eliminate the problems with the factory units, a seal under the upper bearing which caused the bearing to fail prematurely. Crown's OPDA has the seal relocated to above the upper bearing and an oil groove in the shaft which is designed to bring oil up to both the upper and lower bearings. Replace your Jeep's worn unit with the peace-of-mind offered with Crown oil pump drive assemblies.
( 22 )
$107.99
$97.19
On Sale
These AEM Electronics wideband UEGO sensors are used in AEM single channel UEGO systems. They may also work with other wideband UEGO controllers. Features include: * Much more accurate AFR readings than OEM sensors * Response time of less than 100 milliseconds * Measure from 11:1 AFR to atmospheric air * Latest Nernst cell/oxygen pump hybrid technology * Planar-configured zirconium dioxide sensor * Integrated heater element warms up in less than 20 seconds * PTFE insulators withstand temperatures of up to 1,400 degrees Fahrenheit (800 degrees Celsius) * Low current draw
( 22 )
$111.95
$100.75
On Sale
AEM Electronics fluid temperature sensor kits allow you to monitor the temperature of your water, oil, or coolant. Several styles are available and offer sensor, connector, and pins. Select the AEM fluid temperature sensor kit needed for your application. Features of kits available: 30-2011: * Temperature sensor, 3/8 in.-18 NPT, aluminum bung, waterproof connector, pins and wire seals * Operating temperature: -40 to 135 degrees C/-40 to 275 degrees F 30-2012: * Temperature sensor, 1/8 in. NPT, waterproof connector kit and pins * Operating temperature: -40 to 200 degrees C/-40 to 392 degrees F 30-2013: * Temperature sensor, 1/8 in. NPT, High performance DTM-style connector, aluminum bung, connector, and pins * Operating temperature: -20 to 150 degrees C/-4 to 302 degrees F
( 6 )
$70.79
$63.75
On Sale
MSD replacement cam sync distributor Hall effect pickups are perfect for refreshing the timing pickup on your engine. These kits include an LED operation light that makes for quick indexing. Also included is the mating connector with terminals and seals for an all-around rebuild. Make sure your ignition is firing correctly when it supposed to be firing with high-quality replacement components like MSD cam sync distributor Hall effect pickups!
Not Yet Reviewed
$117.95
$106.15
On Sale
Nitrous Outlet ProMax progressive controller fuel pressure sensors allow your ProMax controller to see accurate fuel pressure. They feature an 1/8 in. NPT male thread for an easy connection to the pressure source. Nitrous Outlet ProMax fuel pressure sensors read up to 100 psi and include wiring pigtail.
( 1 )
$123.99
$105.39
On Sale
If you're running an electric choke Holley carburetor and are having trouble figuring out how to get that electronic overdrive transmission to work, Holley has the perfect solution for you. Holley TPS kits are designed for use on an electric choke-equipped Holley carburetor and are perfect for use with an electronic overdrive transmission, such as a 4L60E or 4L80E. They can also be used for data acquisition. These TPS kits are also designed to supply the needed TPS signal to an electronic transmission while retaining a carburetor. They drive directly off of the primary throttle shaft for accurate voltage readings. Holley TPS kits come complete with all the parts needed for a safe and easy installation.
( 36 )
$82.45
$74.25
On Sale
Keep track of temperature levels with AEM Electronics air inlet temperature sensor kits. They include an aluminum weld-in bung, connector plug, and flying lead and sensor to complete the installation. Monitoring engine functions can stop a problem early--pick up AEM Electronics air inlet temperature sensor kits for trouble-free performance.
( 8 )
$67.55
—
$70.79
$60.75
—
$63.75
On Sale
If you require additional outputs and/or upgraded hardware over existing sensors, AEM Electronics MAP sensor kits will put a smile on your face. Their quality construction and precision accuracy make them a perfect choice for demanding performance applications.
( 12 )
$87.15
$56.65
—
$78.45
On Sale
ABS pulses at low speed can be frustrating and dangerous. Incorrect sensor readings due to a dirty or corroded tone ring can cause erratic activation of the anti-lock braking system. Yukon Gear & Axle ABS tone rings help keep your ride in top form by giving your computer the proper information, letting it properly run your ABS readings. They maintain your vehicle's sensor readings and allow your ABS system to function at its peak when you need it. Order the ring recommended for your application.
( 2 )
$70.99
—
$121.99
$60.34
—
$103.69
On Sale
Crown Automotive crankshaft position sensors are used to control ignition timing and the fuel injector. They're crafted to compile information about the working condition and speed of the crankshaft, ensuring your engine cylinders are always performing as needed. This enables you to set ignition timing precisely to improve the performance of the engine cylinders. Crown crankshaft position sensors are available for fitment on a wide range of vehicles.
( 8 )
$55.99
—
$59.99
$50.39
—
$53.99
On Sale
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$71.99
—
$75.99
$64.79
—
$68.39
On Sale
The pressure inside your intake manifold is extremely important input to the ECU—so a quality MAP sensor from MSD is crucial to your engine's performance. These replacement sensors will respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from about 1 to 5 V. They're available in several different versions for naturally aspirated engines, as well as engines with forced induction.
( 11 )
$179.95
$98.95
On Sale
Crown Automotive camshaft position sensors provide information vital to your engine's function. They offer a selection of reliable sensors to send off accurate data to your vehicle's ECM, for proper ignition timing and a smoother-running engine. Timing is important for efficient performance. Replace bad sensors with Crown camshaft position sensors.
( 2 )
$57.99
$52.19
On Sale
Standard Motor accelerator pedal sensors indicate the position of the accelerator pedal by converting pedal movement and position into electrical signals. These sensors are direct replacements for the factory components.
( 49 )
$55.99
—
$104.99
$50.39
—
$94.49
On Sale
Crown Automotive throttle position sensors restore proper idle, rpm, and fuel efficiency. Choose between a variety of TPS styles and fitments to ensure your vehicle's top performance. These economical units are available for numerous models. For quality, efficiency, and a perfect fit, order your replacement throttle position sensors from Crown.
( 3 )
$55.99
—
$76.99
$50.39
—
$69.29
On Sale
Clearance
Standard Motor ABS speed sensors supply information regarding wheel movement to the ABS computer. They're often located at each wheel hub/rotor on 4-wheel disc systems. Alternatively, on rear drum applications, you'll usually find them mounted on the differential housing. Under braking, if wheel speeds are unequal, indicating wheel lockup, the computer modulates the anti-lock feature until the speeds are equal again. Replacement ABS speed sensors are available for hundreds of makes/models. Just match up your vehicle specs to order the correct unit.
( 16 )
$55.99
—
$113.99
$50.39
—
$102.59
On Sale
Crown Automotive oxygen sensors make modern electronic fuel injection and emission control possible. They help determine—in real time—if the air/fuel ratio of a combustion engine is rich or lean. If your sensor functions fail and testing confirms that your unit is faulty, simply order the Crown replacement compatible with your Jeep, Chrysler, Plymouth, or Dodge vehicle. These components are assembled from the finest grade materials and are always field-tested to ensure quality performance.
( 4 )
$55.99
—
$116.99
$50.39
—
$105.29
On Sale
Summit Bucks
ICP sensor failure is a common problem with high-mileage diesels typically resulting in trouble starting, rough idling, and sudden power loss. Keep your vehicle running right with Mishimoto injector control pressure (ICP) sensors that meet all OEM specifications to properly restore engine performance and startup capability. Each kit includes a high-quality sensor, new pigtail harness to eliminate issues from the potentially contaminated stock connector, a durable O-ring seal to ensure leak-free fitment, and heat-shrink butt connectors for easy installation. As with all their products, these ICP sensor kits are backed by the Mishimoto Lifetime Warranty for peace of mind and dependable performance. Select the proper kit for your diesel truck.
Not Yet Reviewed
$64.95
$58.46
On Sale
For 2017-24 Ford 6.7L Powerstroke cab and chassis owners, this Fleece Performance extension harness is required in combination with part number FPE-FH-FMC-1724 when adding the optional fuel heater to the underbed filter base, part number FPE-FMC-UBFA-1724. This extension harness is not required for pickup truck models.
Not Yet Reviewed
$69.99
$59.49
On Sale
That glowing light on the dash that says "ABS" isn't a reminder that your vehicle has this safety feature--it's a reminder that it isn't functioning properly. Crown Automotive ABS speed sensors are designed to the same specifications as the OE units for easy fitment and reliability. Each wheel has at least one sensor that monitors speed and sends that information to the control module, where the correct pressure is sent to ensure quick stopping without skidding. The dash light comes on to inform you that at least one sensor isn't working, and the ABS is turned off. Get the correct parts for the right locations with Crown ABS speed sensors.
( 2 )
$65.99
—
$73.99
$59.39
—
$66.59
On Sale
Brembo offers brake pad wear sensors for a wide range of vehicles—including many BMW, Audi, Porsche, Volkswagen, Mercedes-Benz, Mini Cooper, Jaguar, and Land Rover models. These stock replacements are made from original materials and designed to factory specs to ensure proper fitment and performance. Order the sensors recommended for your application.
( 1 )
$57.53
$51.78
On Sale
Crown Automotive knock sensors are designed to detect harmful engine vibrations. The signal from these devices is sent to the PCM/ECM, and that is used to control the engine's timing. The symptoms of a bad sensor usually show up at highway speeds or under a load. Your vehicle will have a loss in fuel mileage and acceleration, especially at highway speeds--performance decreases and there is a risk of serious engine damage. If your knock sensors have failed or broken, check out Crown for quality replacement parts.
Not Yet Reviewed
$60.99
$54.89
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
