Availability
Showing In Stock Items. Show All 38 Items.
On Sale
Holley offers MAP sensor adapters for a variety of Chevrolet LS engine applications from 1997 and up. They feature pre-terminated connectors and wiring for a direct plug-and-play installation. Depending on the model you select, the adapter will allow: * The installation of an LS3 MAP sensor in an LS2 or LS1 equipped vehicle * The installation of an MPFI WeatherPack 3-pin connector MAP sensor to the 3-pin Delphi GT connector * The installation of a Delphi MIP 3-pin connector MAP sensor to the 3-pin Delphi GT connector
( 20 )
$40.21
$36.19
On Sale
Are you in need of quality replacement components for the Sniper 92mm/102mm throttle body on your Sniper EFI fabricated manifold for GM LS1/LS2/LS3/LS6/LS7 model? Check out what Holley Sniper has to offer, including these throttle position sensors. These quality replacements are sure to do the trick!
( 7 )
$44.66
$40.19
On Sale
Holley offers several coolant temperature sensors designed for use with their Pro-Jection, Sniper, and other fuel injection systems. They feature brass construction with 3/8 in. thread and will provide the ideal fit and function to monitor your engine's coolant temperature. Select the one designed for your system.
( 19 )
$37.46
$33.71
On Sale
The pressure inside the intake manifold is an extremely important input to the engine control unit. Holley Sniper MAP sensors respond to changes in manifold pressures and relay the information to the ECU in the form of a voltage signal ranging from 1-5 volts. These replacement sensors will handle applications up to 25 lbs. of boost. Additional notes: * Utilizes stock attaching points * Sensor monitors manifold vacuum, varying output voltage to the ECU as a function of load placed on the engine—providing necessary data to control fuel enrichment
( 3 )
$35.65
$32.09
On Sale
More simplistic EFI systems have made conversions extremely popular, but adding the sensor often means making major changes to your exhaust system. Hooker clamp-on oxygen sensor bungs are designed to work with your current exhaust for an easy installation. Drill an appropriate size hole in the indicated location, clamp on the 304 stainless steel bung, and install the sensor. Simplify EFI conversions with Hooker clamp-on oxygen sensor bungs.
( 30 )
$49.95
$44.95
On Sale
AEM Electronics fluid temperature sensor kits allow you to monitor the temperature of your water, oil, or coolant. Several styles are available and offer sensor, connector, and pins. Select the AEM fluid temperature sensor kit needed for your application. Features of kits available: 30-2011: * Temperature sensor, 3/8 in.-18 NPT, aluminum bung, waterproof connector, pins and wire seals * Operating temperature: -40 to 135 degrees C/-40 to 275 degrees F 30-2012: * Temperature sensor, 1/8 in. NPT, waterproof connector kit and pins * Operating temperature: -40 to 200 degrees C/-40 to 392 degrees F 30-2013: * Temperature sensor, 1/8 in. NPT, High performance DTM-style connector, aluminum bung, connector, and pins * Operating temperature: -20 to 150 degrees C/-4 to 302 degrees F
( 6 )
$54.45
$49.05
On Sale
AEM Electronics offers a variety of replacement parts—including these harnesses for X-Series wideband with oxygen sensor gauges. They provide plenty of length for routing where necessary.
Not Yet Reviewed
$33.74
$30.37
On Sale
If you require additional outputs and/or upgraded hardware over existing sensors, AEM Electronics MAP sensor kits will put a smile on your face. Their quality construction and precision accuracy make them a perfect choice for demanding performance applications.
( 12 )
$87.15
$56.65
On Sale
Crown Automotive crankshaft position sensors are used to control ignition timing and the fuel injector. They're crafted to compile information about the working condition and speed of the crankshaft, ensuring your engine cylinders are always performing as needed. This enables you to set ignition timing precisely to improve the performance of the engine cylinders. Crown crankshaft position sensors are available for fitment on a wide range of vehicles.
( 8 )
$22.99
—
$58.99
$20.69
—
$53.09
On Sale
AEM cam angle sensor discs are for use with AEM programmable engine management systems. They are a direct replacement for the factory crank angle sensor disc in select applications. Cam angle sensor discs help you eliminate sync issues. (Before purchasing, be sure that the center of the AEM cam angle sensor disc looks exactly like the stock disc in your distributor. Match the hubs of your disc to the AEM disc before ordering.)
( 4 )
$54.45
$49.05
On Sale
Fleece Performance offers fan extension harnesses for a wide range of vehicles, including late model Chevrolet and GMC trucks. These factory-style replacements allow you to repair a broken or damaged harness without replacing the entire fan and clutch assembly. The harnesses are mounted to the fam assembly and connect to the fan and chassis harness. Fully automated in-house cutting and terminal crimping ensure you get the highest quality parts needed to get your truck back on the road quickly. Order the harness recommended for your fan clutch model.
( 1 )
$45.99
—
$49.99
$39.09
—
$42.49
On Sale
The MSD NTK wideband 02 module can be expanded to operate with a second monitoring channel and MSD offers several components for channel 2 operation. When you need more length MSD oxygen sensor extension harnesses provide 18 in. of length for Sensor 2 of your NTK module.
Not Yet Reviewed
$46.10
$41.49
On Sale
AEM Electronics cam angle sensor discs are 24-tooth direct replacements for the factory CAS discs and may be necessary with some Series 1 or 2 EMS when you need to run a different CAS. Before purchasing, be sure that the center of the AEM CAS disc looks exactly like the stock disc in your distributor, and match the hubs of your disc to your AEM disc before ordering.
( 1 )
$54.45
$49.05
On Sale
That glowing light on the dash that says "ABS" isn't a reminder that your vehicle has this safety feature--it's a reminder that it isn't functioning properly. Crown Automotive ABS speed sensors are designed to the same specifications as the OE units for easy fitment and reliability. Each wheel has at least one sensor that monitors speed and sends that information to the control module, where the correct pressure is sent to ensure quick stopping without skidding. The dash light comes on to inform you that at least one sensor isn't working, and the ABS is turned off. Get the correct parts for the right locations with Crown ABS speed sensors.
( 2 )
$22.99
—
$53.99
$20.69
—
$48.59
On Sale
Replace your worn or malfunctioning vehicle speed sensor with one of these Standard Motor Products vehicle speed sensors. Depending upon a vehicle's equipment, the vehicle speed sensor commonly called a VSS may influence or control more systems than any other single sensor. Early-model vehicle speed sensors were just used to regulate the cruise control and control transmission shifts. Now, with OBD-II, vehicle speed is considered a part of the overall engine operating strategies, affecting both fuel delivery and ignition timing. The operations of the idle-air control valve and canister-purge cycle are regulated, in part, by the VSS. Automatic transmissions need VSS data to provide the best performance and mileage. Torque converter clutch operation is controlled by the VSS. In an electronically shifted transmission, VSS signals, instead of hydraulic pressure in the valve body, are used to determine shift points. Don't take chances with your vehicle's performance--insist on Standard Motor Products quality vehicle speed sensors.
( 15 )
$24.99
—
$42.99
$22.49
—
$38.69
On Sale
Crown Automotive throttle position sensors restore proper idle, rpm, and fuel efficiency. Choose between a variety of TPS styles and fitments to ensure your vehicle's top performance. These economical units are available for numerous models. For quality, efficiency, and a perfect fit, order your replacement throttle position sensors from Crown.
( 3 )
$36.99
—
$55.99
$33.29
—
$50.39
On Sale
AEM Electronics Wideband UEGO Controller Air/Fuel ratio gauge components are designed to be used with AEM wideband UEGO controller air/fuel ratio gauges. Whether you need to replace your sensor or cable, these parts will help you to get your gauge back in working order.
( 23 )
$40.28
$36.25
On Sale
If you want to use an SCT Big Air meter on your 1989-95 Mustang, then these adapters are just the ticket. SCT Big Air MAF cable harness adapters allow you to plug the later model style connector right into your current MAF plug on the wiring harness. They're quick and easy to install.
( 6 )
$54.99
$49.49
On Sale
MAP (Manifold Absolute Pressure) sensors which fail may cause the engine to have a too rich or lean fuel mixture condition. Crown Automotive MAP sensors restore data transmission to regulate timing control and fuel delivery. They convert engine vacuum/manifold pressure to an electrical signal so that the computer knows how much load the engine is under. This data is the basis for calculating values which keep your vehicle in top running order.
( 4 )
$22.99
—
$46.99
$20.69
—
$42.29
On Sale
Protect your investment with a Shafer's Classic Reproductions ballast resistor. Shafer's Classic manufactures these ballast resistors to OEM specifications, ensuring years of trouble-free performance.
( 4 )
$34.99
$31.49
On Sale
Crown Automotive vehicle speed sensors are used by many electronic and transmission systems to ensure correct vehicle operation. The small units convey information to your on-board computer about how fast the engine is spinning at any particular moment—which could affect the performance of the transmission, speedometer, ABS, power steering, or cruise control. Like many engine components, speed sensors can eventually malfunction through years of use. If your car, truck, or van develops a faulty sensor, Crown stocks a variety of replacements for countless makes and models.
( 1 )
$24.99
—
$47.99
$22.49
—
$43.19
On Sale
Crown Automotive camshaft position sensors provide information vital to your engine's function. They offer a selection of reliable sensors to send off accurate data to your vehicle's ECM, for proper ignition timing and a smoother-running engine. Timing is important for efficient performance. Replace bad sensors with Crown camshaft position sensors.
( 2 )
$22.99
—
$57.99
$20.69
—
$52.19
On Sale
Fleece Performance universal coolant level float switches feature stainless steel bodies with 1 in. NPT thread, 8 in. harness, and 2-pin metripack connector. They have a 3/4 in. float travel and are for use with the Fleece's coolant tank or custom configuration tanks with 1 in. NPT bung.
Not Yet Reviewed
$39.99
$33.99
On Sale
Crown Automotive park assist sensors detect obstacles around your vehicle, enabling you to park without incident. They provide OE quality, fit, and performance, and are available in several versions covering Chrysler, Dodge, Fiat, Jeep, and Ram vehicles. To restore optimal operation on your vehicle, choose sensors from Crown.
Not Yet Reviewed
$27.99
$25.19
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
