Availability
Showing In Stock Items. Show All 11 Items.
On Sale
Easily add a fuse holder to any vehicle with RT Off-Road fuse holders. They are designed for use with standard ATO fuses and ship with terminated wires for installation in universal applications. The panel mounted fuse holders require no mounting hardware to install—simply create a hole and snap the fuse in!
Not Yet Reviewed
$9.99
$8.99
On Sale
Summit Racing™ offers reproduction wiring harnesses for a wide selection of vehicles, particularly classic cars and trucks from the 1960s and '70s. These replacements and/or extensions are used to power a variety of applications—including horn, glove box, console, backup lights, engine; forward, hood, and courtesy lamps; fuel tank sender, and more. These OE style replacement harnesses are made of high-quality Automotive Grade Wire using factory style fuse blocks, plug ends, and wire colors to ensure factory type fit, performance, and durability. For repair or restoration, order the harness recommended for your specific car or truck. Note: These harnesses are factory replacements and do not include instructions or wiring diagrams refer to the factory diagrams and or service manuals for your specific vehicle.
( 52 )
$201.99
$151.49
On Sale
MSD high-current solid state relay blocks take the place of four standard relays and eliminates unsightly wiring. Four independent channels can be activated using either power or ground. Each channel is capable of handling up to 35 amps of continuous current, providing up to 140 amps of power, and also has the capability of pulse width modulation. The blocks can easily be mounted using the supplied hardware and mounting tabs that can be rotated 90 degrees to accommodate various mounting locations. Clean up your wiring with MSD high-current solid state relay blocks. Features include: * Operates from 7 V to 20 V supply * Four independent channels, 35 amps each continuous or 100 amps for 8 seconds * Combined total continuous current rating of 140 amps * Channels can be run in parallel for devices requiring more than 35 amp single-channel rating * Over-temperature, short circuit, and overload protection * Diagnostic LEDs and status indicators * Multiple mounting options * Single wire activation by switching power or ground * Available in red or black * PWM signal can be used--maximum frequency of 150 Hz and a duty cycle range from 50 to 90 percent
( 16 )
$217.95
$196.15
On Sale
Holley LS extended-length main engine harnesses are 22 in. longer than previous harnesses. Designed to fit most 24x and 58x LS engines from 1997-2012, they are a perfect fit for installers wanting to mount any Holley EFI ECU inside of the passenger compartment where it is away from the elements, and easy to access, such as on a roll bar or under the passenger seat. Notes: * Plug-and-play with Dominator, HP, Terminator X, and Terminator X Max ECUs * LS1/6 harness interfaces with 24x crank and 1x cam sensors * LS2/3/7 harness interfaces with 58x crank and 4x cam sensors
( 1 )
$672.95
$604.95
On Sale
MSD Ignition waterproof relay harnesses are ideal for use on electric fuel pumps, water pumps, cooling fans, off-road lights, and any other application that is exposed to muddy or wet conditions. Each is built with rugged connectors and pigtail harness with long leads and heavy-duty gauge wire. The connectors have wires molded in rubber and a gasket for a leak-proof seal. Features: * Waterproof relay with pigtail harness and sealed connector * Metal bracket for mounting underhood or just about any other location * Ideal for marine, dirt track cars, and off-road trucks and Jeeps * Works in normally open or normally closed circuits
( 10 )
$34.17
$22.21
On Sale
These MSD alternate action switches are designed to be used as auxiliary ignition on/off buttons. They can be mounted to the steering wheel within easy reach of the driver and can be used in a Normally Open or Normally Closed position. MSD alternate action switches are assembled and constructed for harsh racing conditions.
Not Yet Reviewed
$158.95
$143.05
On Sale
Mallory circuit guards combine the protection of the Mallory active power filter from power spikes and surges and other electrical "noise," with the negative spike protection offered by the Mallory power cell. They are designed to plug right in and can even be mounted directly on most distributors. These circuit guards offer great protection for all Mallory UniLite, MBI, and E-Spark modules.
( 14 )
$127.95
$115.15
On Sale
AEM Electronics 4-Port AEMnet CAN Hubs eliminate the need to daisy-chain multiple AEMnet devices together using Y-cables. Now you can easily connect and power multiple AEMnet CAN devices from a central docking station! The four integrated 4-way DTM-style housings provide a reliable AEMnet CAN connection and are safe for engine bay mounting. AEM Electronics 4-Port AEMnet CAN Hubs include the following: * 4-Port AEMnet CAN Hub * Two 4-40 x 7/8 in. flat head screws * Two 4-40 x 0.375 in. washers * Two 4-40 x 9/64 in. Nylock nuts
( 1 )
$99.95
$89.95
On Sale
Morimoto XB ballast resisters are designed to last for 2,500 hours. Their powerful AS15-G4 IC chip recognizes outside system faults, such as a loose high-voltage connection, and after one misfire will cut power rather than potentially self-destruct. The software is proprietary to this ballast alone. Additional features include: * PROTECTED: The diecast aluminum shell houses a 100 percent potted circuit board, eliminating any chance of moisture damage. The AMP SuperSeal 3-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output. * COMPACT: The slim 18mm body will mount almost anywhere. There are four mounting points cast directly into their shell, no spare brackets to mess with. * VERSATILE: Since the igniter cord can be unplugged from the HID ballast computer, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced. * FAST, FRIENDLY AND EFFICIENT: Power hungry HID ballast replacements never work well with tricky CanBus systems, but the new Morimoto XB35 2.0 ballast consumes less than HALF of the start current that the previous model did. Far less than Denso, Mitsubishi, or FastBright—which makes their ability to reach full intensity a more efficient process. * MODERN: Like all modern OEM ballasts, the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up. * FUNCTIONAL WORK OF ART: Morimoto XB35 2.0 HID ballasts are just as good looking on the outside as they are well-engineered on the inside. Stainless steel hardware. TechFlex braided insulation. Embossed circuitry on the shell. * MATURE: The XB35 2.0 features countless advancements from the most popular OEM ballasts. In terms of modern headlight tech, High Intensity Discharge is now fully matured; and therefore the aftermarket gets the full benefit engineering progress in the OEM world.
Not Yet Reviewed
$89.00
$71.20
On Sale
No doubt the aluminum F150 is a capable truck, and if you've already upped the ante by making more power, new wheels, and fatter tires, then it's time to ditch the stock lighting setup too. Morimoto's unbeatable XB LED fog lights have been top sellers forever, and now the lineup expands with offerings such as the new high performance XB LED taillights! * COMPATIBLE: With all Non-BLIS F150s from 2015-20, these complete taillight assemblies will swap directly in place of the original F150 taillights, use all of the stock mounting points, and should only take around 30 minutes to install. * PLUG-N-PLAY: Wiring is easy too! The XB LED tails are designed to work without any special wiring (2018-20 do require the optional harness). They will plug into the factory connectors for the stock lights; and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug-n-play install. No additional resistors, modules, etc. needed! NOTE: 2018-20 F150S REQUIRE THE OPTIONAL HARNESSES, HOWEVER THESE ARE STILL NOT COMPATIBLE WITH OEM LED OR OEM BLIS TAILLIGHT-EQUIPPED TRUCKS. * STYLE: While they look radical, they don't look out of place like other aftermarket options. The geometry flows with the body lines like a boss. The XB LED tails for your F150 are available with either a smoked or red lens. Both will illuminate red. * WELL-BUILT: Their durable polycarbonate lens will resist the test of time, keeping the housings looking new for many years to come. The injection molded ABS housing is lightweight and much stronger than comparable cheap alternatives. The XB taillights may not be the cheapest new taillights for your F150, but they're OE quality.
Not Yet Reviewed
$56.00
$44.80
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
