Availability
Showing In Stock Items. Show All 36 Items.
On Sale
NOS solid-state relays address the need for reliable, rugged, and affordable control of various electrical equipment on your race car. Originally designed to control the high-current switching loads of nitrous solenoids, these relays can also be used to control other high-current devices—such as electric water pumps, trans-brakes, and line locks. NOS relays feature an ultra-low activation/release time of less than 16 microseconds to ensure no delays in reaction times. The solid-state relays can also be Pulse Width Modulated (PWM) with no minimum-duty cycle at frequencies up to 1000hz. NOS solid state relays feature: * 5-20 V DC operation * Rugged solid-state circuitry * Easy 3-wire connection * Included terminated pigtail * Included extra contacts for build-your-own wiring * Ultra-fast activation, under 16 microseconds * Pulse Width Modulation (PWM) compatible * PWM 0-100 percent * Up to 1000hz frequency * Vibration-resistant * Maximum continuous current = 40 amps * Maximum switching current = 20 amps
( 14 )
$92.45
$83.25
On Sale
MSD relay modules are designed to be easily installed in most automotive electrical systems where a high amperage relay is needed. These relay modules are perfect use with high amperage electric fuel pumps and high CFM electric cooling fans. The relay housing comes with a labeled lid that snaps into place providing a clean installation and protecting the main power stud and triggers from contamination or accidental contact. MSD offers these relay modules with different channel outputs, select the model that's designed to meet your application needs. Features include: * 7 V to 20 V supply to fit a wide variety of applications * Independent 40A outputs, to supply power to most aftermarket fuel pumps and electric fans * Configurable single-wire activation with Ground (-) input or 12 V (+) input, with removal of the Tie-Bar * Removable cover for easy accessibility * Low-profile JCASE fuses provide ample protection in case of a short * LED status indicators, show you which channel is triggered at a glance
( 13 )
$57.49
—
$99.95
$51.75
—
$89.95
On Sale
Morimoto projector headlight conversion harnesses are designed to adapt the 2009+ Dodge Ram projector-style headlights onto trucks that came standard with the basic dual halogen headlamps. The harnesses enable you to upgrade to the most modern Ram look without cutting, splicing, or modifying anything on the truck's factory harness. It's a seamless plug-and-play solution to keep your low and high beams under control on the new OEM projector lights using the original controls inside the cabin. The outputs will plug directly into the multi-pin connector on the back of each headlight from Dodge. Note: These adapters are tested and work on OEM/TYC headlights. At this time, they do not work on DEPO aftermarket headlights.
( 2 )
$94.00
$75.20
On Sale
Don't take chances with old, questionable, or faulty turn signal switches that can be a danger to you and others. Scott Drake replacement turn signal indicator switches are designed to exceed OEM specifications for dependable, accurate, maintenance-free operation. These units include wiring and are available for a variety of classic makes and models. Trust your vehicle's electrical system needs to Scott Drake.
( 89 )
$92.35
—
$117.95
$50.79
—
$106.15
On Sale
Holley split wire looms direct from the Holley EFI Wiring Shop. These are high-quality TechFlex F6 black nylon braided split looms they utilize on their main harnesses. They are available in two lengths and a range of diameters from 1/8 in. to 2 in. to build or service your Holley EFI-powered machine.
( 31 )
$65.85
—
$104.95
$59.25
—
$94.45
On Sale
Holley trans-brake input protection modules allow for an ECU input to be safely connected directly to the 12 V side of the trans-brake solenoid. They are designed to protect the ECU input from damaging fly-back voltage, which occurs when the trans-brake is released. Not using one of them will cause damage to the ECU over time.
( 4 )
$59.25
$53.35
On Sale
AEM Electronics 4-Port AEMnet CAN Hubs eliminate the need to daisy-chain multiple AEMnet devices together using Y-cables. Now you can easily connect and power multiple AEMnet CAN devices from a central docking station! The four integrated 4-way DTM-style housings provide a reliable AEMnet CAN connection and are safe for engine bay mounting. AEM Electronics 4-Port AEMnet CAN Hubs include the following: * 4-Port AEMnet CAN Hub * Two 4-40 x 7/8 in. flat head screws * Two 4-40 x 0.375 in. washers * Two 4-40 x 9/64 in. Nylock nuts
( 1 )
$99.95
$89.95
On Sale
Holley has you covered with their extensive line of OE-style wiring components, including connector terminal pins to help you build or service your Holley EFI-powered machine. These pins are available in a variety of styles for different connectors and wire gauge. From replacement connectors and pins … to wire loom and tools—make Holley your one-stop solution for all of your wiring component needs.
( 4 )
$65.85
$59.25
On Sale
MSD high-current relays are what you need to activate accessories that draw high current. These relays are very reliable due to the fully automated manufacturing process and sophisticated coil winding procedure. They are available in single and dual pole/throw 30 amp/12 VDC units to suit your automotive needs.
( 15 )
$59.25
$53.35
On Sale
Fleece Performance offers wiring pigtails and replacement connectors for a wide range of vehicles—including many Dodge, Chevrolet, GMC, Ford, and Ram models from the 1990s and up. These replacement parts are ideal for sensors, starter solenoids, cooling fans, and other components under the hood. Fully automated in-house wire cutting and terminal crimping ensure you get the highest quality connectors and pigtails to get your car or truck back on the road quickly. Order the model that corresponds to your electrical application.
( 3 )
$59.99
$50.99
On Sale
Most cars with an HVAC system use blower motor resistors to control the speed of the fan. If the resistor becomes corroded, the lower speed settings may stop working or the fan will not work at all. Replace your Jeep's resistors with Crown Automotive OE quality parts.
( 1 )
$58.99
—
$96.99
$53.09
—
$87.29
On Sale
Morimoto XB ballast resisters are designed to last for 2,500 hours. Their powerful AS15-G4 IC chip recognizes outside system faults, such as a loose high-voltage connection, and after one misfire will cut power rather than potentially self-destruct. The software is proprietary to this ballast alone. Additional features include: * PROTECTED: The diecast aluminum shell houses a 100 percent potted circuit board, eliminating any chance of moisture damage. The AMP SuperSeal 3-pin connector from TE Connectivity between the igniter and the ballast ensures the safety of this crucial output. * COMPACT: The slim 18mm body will mount almost anywhere. There are four mounting points cast directly into their shell, no spare brackets to mess with. * VERSATILE: Since the igniter cord can be unplugged from the HID ballast computer, you can easily change from AMP to D2S or vice-versa (without the use of unreliable adapters, that is). Likewise, if an igniter does happen to go bad, it can easily be replaced. * FAST, FRIENDLY AND EFFICIENT: Power hungry HID ballast replacements never work well with tricky CanBus systems, but the new Morimoto XB35 2.0 ballast consumes less than HALF of the start current that the previous model did. Far less than Denso, Mitsubishi, or FastBright—which makes their ability to reach full intensity a more efficient process. * MODERN: Like all modern OEM ballasts, the XB has relocated igniters far closer to the HID bulb. The lack of high voltage transmitted through wiring drastically reduces EMI/RFI (radio interference). Total system reliability is also improved by shielding the main circuit board from the static produced by these high voltage bursts on start up. * FUNCTIONAL WORK OF ART: Morimoto XB35 2.0 HID ballasts are just as good looking on the outside as they are well-engineered on the inside. Stainless steel hardware. TechFlex braided insulation. Embossed circuitry on the shell. * MATURE: The XB35 2.0 features countless advancements from the most popular OEM ballasts. In terms of modern headlight tech, High Intensity Discharge is now fully matured; and therefore the aftermarket gets the full benefit engineering progress in the OEM world.
Not Yet Reviewed
$89.00
$71.20
On Sale
Nitrous Outlet fuel pressure safety switches are necessary safety devices that can save your nitrous-boosted engine in the event of fuel pump failure. These switches are designed to work in-line with -6AN fuel supply hoses and promptly shut off your nitrous system when the fuel pressure drops below your preset calibration. Specifically engineered to withstand the rigorous demands of running nitrous, the switches are available for high- or low-pressure setups (carbureted, dedicated fuel, or fuel injected systems). Order the Nitrous Outlet fuel pressure safety switch recommended for your specific application. Features: * 1/8 NPT inlet on -6 AN manifold * All switches fully adjustable by set screw at end of pressure switch * Low-pressure switches shipped preset at 5 psi (adjustable range from 1.5 to 20.0 psi) * High-pressure switches shipped preset at 35 psi (adjustable range from 20 to 120 psi)
( 3 )
$76.99
—
$87.99
$65.44
—
$74.79
On Sale
Nitrous Outlet switch panels are designed to give you a clean look—and make using multiple nitrous-related options easier to manage with the use of large, easy-to-reach switches. These panels are constructed of water jet-cut aluminum and have a black anodized finish and a custom fit. They'll work with any brand of nitrous system and accessories, and with no drilling needed, will mount to your cup holder, ashtray, or console, depending on the application.
( 18 )
$76.99
—
$112.99
$65.44
—
$96.04
On Sale
Mr. Gasket weatherproof connector kits contain an assortment of wiring components that are ideal for all high performance and racing wiring applications. The high-quality connectors and seals provide a reliable, OE-style wiring connection. These 232-piece kits offer a selection of 14 connectors with 1 to 4 terminals per connector, and crimp terminals and seals that work with 12-20 gauge wire. The connectors are compatible with those on most high performance electrical components (i.e. MSD Distributors, Holley distributors, EFI Systems, and many OE sensors and components). A plastic storage case keeps everything organized. What's in the box: * (5) 1-pin connectors (male and female) * (3) 2-pin Connectors (male and female) * (4) 3-pin connectors (male and female) * (2) 4-pin square connectors (male and female) * (2) 4-pin flat connectors (male and female) * (120) crimp terminals—male and female for 12-20 gauge wire * (80) seals for 12-20 gauge wire * Plastic storage case
( 1 )
$95.85
$52.72
On Sale
MSD SPST kill switches feature a heavy-duty, single-throw switch that will stand up to the abuse of the racing world. They are rated at 15 amps, so they can handle the power of the Pro Mag 12. The housing is designed to survive high impacts, and features a molded elastomer seal between the toggle lever and bushing.
( 1 )
$117.95
$106.15
On Sale
Don't put yourself or others in danger with a malfunctioning turn signal switch. Crown Automotive multi-function switches are designed to activate various accessories, such as your windshield wipers, headlights, fog lights, and turn signals—all in one convenient lever unit. These replacement switches are made to meet or exceed OE specifications for fit and function.
( 3 )
$58.99
—
$100.99
$53.09
—
$95.94
On Sale
PerTronix Weatherpack connector kits are the ultimate way to secure your electrical connections for long-life and dependability. Features and benefits include: * Weatherproof housing made of nylon plastic for impact resistance * Connector has lock mechanism that align terminal and seal * Positive snap lock action with secondary locking for terminal retention * Indexed to prevent miss matching * Temperature rated at -40 degrees to 248 degrees F * Terminals are brass, and tin treated * Silicone seals in green and blue for different gauge wire
( 2 )
$73.20
$65.88
On Sale
When it rains, make sure that your Jeep has working wipers. Crown Automotive windshield wiper switches just plug in and control the wiper function. These perfect replacement switches are available for models with or without intermittent wipers. Crown offers the largest line of OEM replacement parts for your Jeep.
( 5 )
$83.99
—
$94.99
$75.59
—
$85.49
On Sale
Gain additional flexibility in your harness routings with Fleece Performance extension harnesses. Produced in-house, Fleece's manufacturing process includes fully automated wire cutting and terminal crimping to ensure you get the highest quality replacement parts you need to get your vehicle back on the road quickly. Choose the harness needed for your wiring application.
Not Yet Reviewed
$59.95
—
$59.99
$50.96
—
$50.99
On Sale
Fuel pressure drops and the LED illuminates—and if it doesn't, you may need to replace the pressure switch. BD Diesel offers quality replacements for their alarm light kits. The pressure switches will provide a ground when the fuel pressure drops below 5 psi, then your LED will illuminate warning you of a problem. Maintain your warning system with replacement pressure switches from BD Diesel.
( 1 )
$56.95
$51.26
On Sale
These Mr. Gasket battery disconnect switches positively shut off all of the current from the batteries in the event of a short or accident. They include an adhesive decal to show both on/off positions and detailed instructions for a safe installation. Protect yourself and your vehicle with one of these Mr. Gasket battery disconnect switches.
Not Yet Reviewed
$65.49
$58.95
On Sale
Crown Automotive ignition switches activate the main and accessory electrical systems in a vehicle and, when the key is turned, transfer power to the starter, too. All of the current running through the ignition switch will eventually overheat it, requiring a replacement. These switches are designed and built to OEM specs for excellent fit and reliable performance.
( 3 )
$59.99
$53.99
On Sale
Electrical switches send the power to control many things in your vehicle, including the up and down operation of your windows. When new switches are needed, Crown Automotive power window switches and window/door lock assemblies are offered for Jeep, Dodge, Chrysler, and Fiat vehicles. They will provide the proper fit and function to keep your windows rolling smoothly. Choose the switches designed for your vehicle.
Not Yet Reviewed
$106.99
—
$109.99
$96.29
—
$98.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
