Availability
Showing In Stock Items. Show All 14 Items.
On Sale
MSD Pro-Billet oil plugs keep your front drive distributor running like new. Their front drive distributors brought the need for distributor plugs. These plugs are made of billet aluminum and feature a slip collar to ensure correct installation depth.
( 3 )
$299.95
$269.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 241 )
$424.95
—
$641.95
$302.21
—
$448.95
On Sale
MSD Pro-Billet distributor plugs with cam sync are the perfect solution when running an aftermarket sequential EFI system with coil-per-cylinder ignition. The cam sync plug installs in place of a traditional distributor, providing a Hall-effect cam sync signal needed for the EFI system to reference the #1 cylinder. For wet sump applications, the plug also drives the oil pump. MSD cam syncs are plug-and-play with Holley EFI systems, and can easily interface with most aftermarket EFI systems. MSD cam sync plugs feature: * Built-in LED makes set-up and indexing quick and easy * Plug-and-play with Holley EFI and compatible with other aftermarket EFI systems requiring a cam sync signal * CNC-machined billet housing with black anodized cap provides good looks and excellent durability * Available with cast melonized, steel, or bronze distributor gear, depending on the application * Chevrolet version is supplied with an adjustable slip collar for blocks with a non-standard deck height
( 8 )
$349.95
—
$435.95
$314.95
—
$391.95
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$482.95
$433.95
On Sale
MSD Pro-Billet Ready-to-Run EFI distributors are the perfect upgrade when you start making serious power with your EFI Ford or Chevy. They use a stock-style trigger pickup and come with plug-in connectors. Installation is simple by removing the stock distributor, then plugging in and bolting the new one in place! A maintenance-free magnetic pickup accurately triggers this ignition with increased output from the amplifier, easily outperforming stock ignitions. These distributors will smooth out the engine's idle, improve starting, and perform at a much higher rpm. Their housings are machined from billet aluminum, using state-of-the-art CNC mills and lathes. For stability and endurance, an oversized steel shaft spins in a top-mounted sealed ball bearing for accuracy through the entire rpm range. Chevy models also feature an extra-long sintered bushing at the bottom and an extra oil tract machined into the bottom of the housing for improved lubrication. The tract delivers oil directly to the cam and distributor gears. All of the shafts receive a QPQ coating for low friction wear, and resistance against corrosion from humidity and ozone buildup. The Chevrolet models have also been tested by the Underwriter's Laboratory, and are certified to meet or exceed safety standards for marine ignition systems as set by the U.S. Coast Guard.
( 93 )
$499.95
—
$549.95
$448.95
—
$493.95
On Sale
What do you get when you add a rev limiter to the MSD's already bulletproof 6M-2 marine ignitions? The MSD 6M-2Ls! These ignitions are designed for performance marine applications where a high-energy and reliable ignition is a necessity. The capacitive discharge (CD) multiple sparks from the 6-series circuitry ensure easier starting, improved performance, and reduced plug fouling while idling. The MSD 6M-2L ignitions have the same mounting footprint as the original units, so they will easily fit into existing brackets. The proven Soft-Touch rev limiting action is set using MSD's marine rpm modules, so you'll be able to set a rev limit exactly where your engine needs it. The 6M-2L ignitions are built to deal with constant high rpm and load conditions unique to marine applications. To protect the 6M-2Ls' electrical circuitry from direct water contact, the entire units are potted with red polyurethane. This material prevents the electrical components from coming into contact with water or other chemicals that could cause damage. Weathertight connectors with multi-ribbed seals are unaffected by water, oil, gasoline, and most other chemicals associated with boats. The 6M-2L ignitions can be triggered by a magnetic pickup (distributor or crank trigger), amplifier, or breaker point distributor. The cable harness has the proper connector, so you can plug the 6M-2Ls directly into MSD's Pro-Billet marine distributors.
( 10 )
$549.95
$493.95
On Sale
MSD billet distributors are one of the finest street performance and racing distributors available. The distributor housings are precision-machined on CNC lathes from billet 6061-T6 aluminum to within +/- 1/1,000 in., producing a housing that's stable, lightweight, and less prone to flex. They feature an upper-sealed ball bearing to guide the distributor shaft and prevent shaft wobble at high rpms, and O-rings at the bottom of the base for improved oil control. The shaft is polished and QPQ-coated to minimize friction and allow the distributors to operate through 10,000 rpm. An adjustable mechanical advance assembly allows you to accurately and easily modify the advance curve to match your specific application. MSD premium distributors come complete with a race rotor and alkyd cap.
( 84 )
$449.95
—
$526.95
$403.95
—
$473.95
On Sale
MSD Pro-Billet crank distributors are built specifically for racing engines with almost no room for a distributor, due to tunnel rams or blowers. These units are equipped with a special low-profile crab-style distributor cap, allowing them to fit into extremely tight areas. The housing features two optional O-rings at the bottom that improves oil control by preventing oil pressure loss. Also, a small oil bleed hole (located in the base) sprays oil on the distributor and camshaft gears to prevent excessive wear. Since these are racing distributors, there is an adjustable slip collar to make up for engines that have had the distance between the mounting surface and the gear modified. Crowning the Pro-Billet crank distributor is MSD's own crab cap. This incorporates spark plug-style terminals for a better connection and grip to the plug wires. Order the model recommended for your vehicle and engine application.
( 20 )
$399.95
—
$526.95
$359.95
—
$473.95
On Sale
The cap and rotor of any ignition system must be considered maintenance items. Just like when you change the oil and filter in your car, you should always replace your cap and rotor as a set. MSD makes it easy with these cap and rotor replacement kits. The correct rotor is already matched to the correct cap for you.
( 515 )
$299.95
$269.95
On Sale
Bully Dog heavy-duty WatchDog diesel tuners monitor multiple parameters to improve engine performance tracking. They also allow you to read/clear diagnostic trouble codes (DTCs), and accurately set the limit of your vehicle's cruise control. This can save considerable time and money when crossing borders by switching the maximum speed setting before the engine automatically limits power (not available for PACCAR MX 13 engines). They also feature Driving Coach mode to help you achieve the best fuel economy possible. Bully Dog heavy-duty WatchDog diesel tuners help develop confidence, fuel-saving driving habits, and provide extra monitoring of truck functions. Features and specs: * Set vehicle warnings to alarm if parameters are exceeded for coolant temperature, oil temperature, boost, and speed * Free internet updates help assure that you always have the latest files for your vehicle * Adjustable options vary for each vehicle and may not be available on all vehicles
Not Yet Reviewed
$449.00
$404.10
On Sale
These Pro-Billet dual pickup distributors from MSD are specifically designed for Circle Track racing. Not only do they feature a strong, CNC-machined billet 6061-T6 aluminum housing and a large steel shaft, but they also feature two magnetic pickups for a complete redundant ignition system that can be activated at the flip of a switch. The pickups are triggered as a precision reluctor, mounted to the oversized shaft, spins past. The pickups are placed precisely 180 degrees apart so that when you switch to the secondary ignition, the timing remains constant. Guiding the distributor shaft is the responsibility of two sealed ball bearings for incredible endurance and high-end stability. The shaft also receives a QPQ coating for corrosion resistance and friction reduction. Additional features include a fully adjustable mechanical advance consisting of a hardened advance cam, chromoly weights, and weight pins that are TIG-welded to the advance plate. The entire assembly is welded to the polished steel. The advance assembly can also be easily locked out for quick tuning changes. The Chevrolet model features two O-ring grooves at the base of the CNC-machined housing to prevent oil in the lifter valley from leaking through the oil passage. If the engine deck, heads, or intake have been modified, there is an adjustable slip collar that allows you to set the correct installation depth. All dual pickup distributors include a cap and rotor.
Not Yet Reviewed
$649.95
$357.95
On Sale
Replace the weak link in your LT1 ignition with these ACCEL Performance Replacement GM Opti-Spark II distributors. They feature an all-new construction with heavy-duty Oil-lite bushings and polished aluminum housings. The ACCEL Performance Replacement GM Opti-Spark II distributors include a high dielectric strength reinforced cap with brass contacts and a balanced rotor. Also included are new pin drive shaft seals, hardware, and easy-to-follow instructions.
( 16 )
$472.95
$424.95
On Sale
FiTech Go-Spark distributors feature 2-wire magnetic pickups, compact bowl and cap designs to fit into locations where a larger or bulkier distributors will not, and adjustable advance systems, vacuum and/or mechanical, that allow you to dial in a timing curve for any high performance need or for more economy when cruising at light loads on the street or highway. CNC-machined housings, centerless ground shafts, Oil-Lite bushings, hardened drive gears, and FiTech's 3-year limited warranty make Go-Spark distributors very popular. Choose one for your vehicle. Features: * CNC machined 6061 T-6 aluminum housing * Centerless ground shaft that rides on an upper sealed roller or ball bearing * Extended length lower bronze Oil-Lite bushing for smooth operation at high rpms * Melonized or hardened iron drive gear ensures long service life * High-output magnetic pickups and paddle wheel reluctors ensure strong, stable trigger signals—even at higher rpms * Cap and rotor are 30 percent glass filled polyester (PBT) that offers high-impact and dielectric strength, and resistance to carbon tracking * Cap contacts are brass, the rotor spring is stainless steel for long-term maximum conductivity * Dual 2-wire magnetic pickup models available--pickups are placed 180 degrees apart to provide a complete redundant ignition system for racing applications * Height adjustment for deck height differences (not all Go-Spark models)
Not Yet Reviewed
$295.00
—
$459.00
$250.75
—
$390.15
On Sale
FiTech Go-Spark Ready-To-Run distributors have a built-in module for easy installation with a simple 3-wire hook up, negating the need to run an external ignition control box. They are perfect distributors for a crate engine or when replacing an old points-triggered distributor. Each one features a CNC-machined 6061 T-6 aluminum housing with a centerless ground shaft. The shaft rides on an upper sealed roller bearing with an extended length lower bronze Oil-Lite bushing for smooth operation at high rpms and extended service life. A high-output magnetic pickup and large paddle wheel reluctor provides a strong trigger signal at high rpms, while the built-in high performance inductive storage module supplies unrivaled energy to the coil ensuring maximum performance at all rpm levels. The fully adjustable mechanical advance is welded to the top of the shaft for easy access and is plated to reduce friction and prevent corrosion for long term durability. An adjustable vacuum advance canister allows you to dial in the ideal timing curve to meet your high performance or cruising needs. FiTech Go-Spark Ready-To-Run distributors have caps and rotors molded in high-quality 30+ percent glass fiber reinforced polyester (PBT) that offers both high-impact and dielectric strength while resisting carbon tracking. The cap contacts are brass and the rotor spring is stainless steel for long-term maximum conductivity. With FiTech's 3-year limited warranty, you can be confident in the quality performance of your Hot Rod. Select the ideal distributor for your vehicle.
Not Yet Reviewed
$309.00
—
$409.00
$262.65
—
$347.65
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
