Availability
Showing In Stock Items. Show All 50 Items.
On Sale
These Mallory Unilite distributors give you accurate, maintenance-free ignition timing. Instead of old-fashioned points systems, they have photo-optic, LED-triggering systems that never vary or wear out. You get increased rpm potential, improved combustion, longer spark plug life, and better cold-weather starting. Hooking one up is a simple 3-wire connection, and they come with your choice of adjustable mechanical and/or vacuum advance, self-lubricating bushings, and a Super-Duty cap and rotor.
( 56 )
$599.95
$329.95
On Sale
MSD Ignition extension wiring harnesses are made to work with their carbureted ignition controllers. You can depend on MSD to make ignition control a snap!
( 1 )
$399.95
$359.95
On Sale
MSD 8.5mm Super Conductor spark plug wire sets feature a special helically wound core that has just 40-50 ohms of resistance per foot—but with an RFI suppression equal to a 1,500 ohm wire. In fact, each foot of finished wire includes 40 ft. of tightly wound copper for superior conductivity. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference "choke." This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. A tough, 8.5mm synthetic/silicone jacket over an extra-heavy glass braid and dielectric insulator keeps the current guided to the plugs. Underneath the high-temperature boots, dual crimp stainless steel terminals feature snap-locks to ensure a secure fit. Each set comes with clip-on cylinder markers for easy identification. MSD's 8.5mm Super Conductor wire sets are available in custom or universal-fit applications, assembled or not, with a variety of terminal and boot end options.
( 1970 )
$382.95
$344.65
On Sale
MSD Pro-Billet distributors share the same CNC machining techniques as the rest of the MSD distributor line. They feature a housing that's machined from high-quality 6061-T6 aluminum for durability and show-quality looks. Their oversized shaft receives a QPQ coating for friction reduction and corrosion resistance, with the added strength of two sealed ball bearings that guide the shaft accurately at well over 10,000 rpm. An extra-long sintered bushing replaces the ball bearing at the bottom of Chevrolet models. TIG-welded on top of the polished steel shaft is MSD's accurate mechanical advance assembly. The weights are supported by nylon pads that allow the advance to operate smoothly throughout the rpm range. For all-out racing, the advance mechanism can also be easily locked out. To accurately trigger the ignition, a high-output magnetic pickup is bolted to the base. This pickup produces a precise trigger signal that will never vary more than one degree at any rpm. A durable gear is installed for performance applications, and an MSD red cap with brass terminals and race rotor is supplied. They're available in standard and small diameter models for applications with limited clearance, and require the use of a separate ignition box such as an MSD 6, 7, 8, or 10 Series ignition.
( 404 )
$399.95
—
$749.95
$359.95
—
$493.95
On Sale
These PerTronix billet plug and play distributors feature the Ignitor II electronic ignition module, a billet CNC-machined housing, an upper roller bearing, and a self-lubricating, oil-impregnated copper powder metal lower bushing. They are compatible with any inductive ignition system coil and come with a factory-preset performance curve, a mechanical advance limiting adjustment, and a small-diameter, high-dielectric strength cap and rotor.
( 6 )
$526.25
$473.62
On Sale
DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with the PredatorX dongle to give you complete tuning access from your pocket. The OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. The tuners are preloaded with power adding tunes for multiple octane levels, as well as transmission tunes for applications where they are needed. For those seeking more than the provided tunes offer, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Features: iOS and Android support Tune from your smartphone! Preloaded with Performance tunes Trucks get tunes for 87 octane and Premium fuel Performance cars get tunes for 91 and 93 octane fuel TCM tunes are included End user adjustable parameters Disable AFM! Calibrate Speedometer for Taller Tires Set axle ratio if you've swapped gears Remove Speed Limiter Adjust Idle Speed Raise Rev Limiters Live data monitoring Read/Clear Diagnostic Trouble Codes (DTCs) Adjust options like idle, speed limiters, rev limiters, tire size, gear ratios and more. Support for 07-18 GM gas trucks and SUVs, 05-19 Corvette, and 10-24 Camaro V8, and more!
( 14 )
$295.95
$266.35
On Sale
SCT BDX performance programmers include features that'll keep you in the fast lane! These computer programmers are bred to sharpen and maximize your rig's potential to tackle tough terrain, pull heavy payload, and gain the most fuel economy on the highway. SCT gas and diesel programmers are equipped with on-screen gauges, the capability of holding 10 custom tunes, and data logging/monitoring of critical engine parameters. BDX units allow you to adjust nearly two dozen functions (options vary for each vehicle). All of this is packed into compact, sleek, hand-held designs with full-color, easy-to-use LCD displays. Unleash more horsepower and torque when you need it the most—on and off-road. You'll stay ahead of the pack with SCT BDX performance programmers. Order the model recommended for your vehicle application.
( 18 )
$399.00
$359.10
On Sale
DiabloSport inTune i3 Platinum computer programmers come pre-loaded with industry-best Diablo tunes created by their experienced, professional calibrators. They too, are performance enthusiasts addicted to horsepower and racing—and they appreciate the need for custom tunes to take their vehicles to the next level with additional modifications. inTune i3 Platinum units will get your ride "dialed-in," whether you've added a cam, headers, a supercharger, or power-adder. The i3 performance programmers work hand-in-hand with CMR (Chip Master Revolution), allowing you (and the tuning shop of your choice) to tune specifically for your aftermarket modification—from there, the sky is the limit! You've made a significant investment in premium parts for your vehicle. Now let the DiabloSport inTune i3 Platinum computer programmers tie all the ingredients together to make your ride stand out! Order the model designed for your vehicle application.
( 147 )
$464.95
$417.95
On Sale
Bully Dog GT Platinum tuners are four products in one: a vehicle engine tuner, monitor, gauge, and diagnostic device. They dramatically improve the utility of your vehicle by increasing horsepower, improving fuel economy, and providing a comprehensive set of monitoring features and diagnostic functions. Bully Dog GT Platinum tuners are incomparable to other tuning products because they have the largest feature set and the widest range of vehicle applications available.
( 65 )
$469.00
$422.10
On Sale
Bully Dog BDX tuners are bred to sharpen and maximize your rig's potential to tackle tough terrain, pull heavy payload, and gain the most fuel economy on the highway. Bully Dog gas and diesel programmers are equipped with on-screen gauges, the capability of holding 10 custom tunes, and data logging/monitoring of critical engine parameters. All of this is packed into compact, sleek, handheld designs with full-color, easy-to-use LCD displays. Unleash more horsepower and torque when you need it the most--on road and off; stay ahead of the pack with Bully Dog BDX tuners.
( 16 )
$399.00
$359.10
On Sale
PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module are designed to provide maximum ignition performance and easy installation, all at a price that you can afford. They allow you to upgrade your outdated points or stock electronic distributor with a performance-proven unit. The distributors feature the patented Ignitor II® electronic ignition module and a CNC-machined 6061 T-6 polished billet housing. PerTronix electronics are compatible with any inductive ignition system coil, but high-rpm performance can be improved when they are used with the low-resistance (0.6 ohm) Flame-Thrower II coil. Their stand-alone design makes them plug-in units that require no additional ignition, but they are compatible with multi-spark CD ignition boxes for outstanding versatility. Additional features include a tempered shaft, an upper roller bearing, and an oil-impregnated sintered bronze lower bushing. The PerTronix Flame-Thrower plug and play billet distributors with Ignitor II® module come with a factory-set performance curve, a mechanical advance limiting adjustment, and a small, high-dielectric strength cap and rotor for applications with little clearance.
( 357 )
$398.40
—
$433.40
$358.56
—
$390.06
On Sale
Superchips Flashpaq tuners will optimize both engine and transmission calibration throughout the entire powerband. They're effective from part-throttle through wide-open throttle. Features include: * Internet updateable * Built-in diagnostic trouble code definitions * Built-in help screens * USB communications * Custom application upgradeable * Multiple tuning levels * Increased user options for more control * Ergonomically-designed case * Large, soft key buttons * Permanently mounted cable * 300 percent larger screen * Backlit screen for easy-to-read night use
( 97 )
$449.95
$403.95
On Sale
MSD DynaForce starters are built with all-new components and hand-assembled in the USA. For maximum performance and reliability, all starters are dyno-tested and blueprinted before they leave the factory. The armature is balanced during assembly and is guided by two ball bearings for smooth engagement during thousands of starts. MSD DynaForce starters feature a 3.4 hp motor—and a reduced 4.4:1 gear ratio delivers superior torque to start high-compression race engines up to an 18:1 ratio. They include a downsized housing that clears most headers and oil pans, and a billet aluminum mounting block that can be clocked in different positions for tighter clearance applications. These starters are available in a durable red or black powdercoat finish that's designed for maximum protection while looking good. They use a nickel plated, heavy-duty solenoid for optimum performance in severe environments. Order the model designed for fitment with your vehicle application.
( 241 )
$449.95
—
$549.95
$357.95
—
$403.95
On Sale
These SCT X3 Power Flash programmers store up to three separate custom tunes that can increase horsepower, torque, and even fuel mileage! They feature a huge backlit LCD display for easy viewing of built-in data logging or real-time monitored vehicle data, and popular sensor data such as EGT, air/fuel ratio, and many other sources. The programmers back up your factory PCM program during installation should you ever need to return your vehicle to the stock PCM program. These SCT X3 Power Flash programmers can read and clear diagnostic trouble codes. They have dual analog inputs, user-adjustable vehicle parameters, and include a USB interface cable.
( 7 )
$379.00
$341.10
On Sale
DiabloSport Pulsar XT Power Modules are an all-new take on drivability and calibration for your 5.7L Ram Hemi. Unlike any other device on the market, Puls0ar XT is an innovative inline module engineered to keep your factory PCM untouched, with no PCM swap or unlock required. This is the most advanced and easiest way to disable your V8's MDS system to eliminate 4-cylinder mode and keep that Hemi running on all 8, all the time. The built-in throttle pedal sensitivity control also helps you fine-tune your pedal feel to eliminate throttle lag and make your Hemi drive like you want it to. Why spend thousands on different devices and hope they'll work together when Pulsar XT does it all in one simple 15-minute install with state-of-the-art smartphone app control. Enjoy Pulsar XT's shift-on-the-fly pedal programming, with seven levels changeable through your steering wheel controls. The smartphone app allows you to adjust your speedometer for larger tires, transfer case ratio changes, and gear ratio changes—along with adjusting TPMS settings, disabling your Auto Start/Stop, and checking and clearing DTC's. You'll love the way your Ram Hemi reacts with Pulsar XT, with improved throttle response, tire size calibration, and improved drivability running in V8 all the time. (Fits new body style E-Trq and Non E-Trq models.) Additional details: * Disable multi-displacement system to maintain V8 all the time (MDS) * User adjustable throttle booster settings (7 pre-set levels plus factory) * Calibrate for tire sizes 28-40 in. (any size entered above 33.9 in. may disable Park Sense and Blind Spot Monitoring, in some applications) * Improves throttle response and drivability * Disable Engine Auto Start/Stop * Adjust TPMS warning threshold (25-99 psi) * Gear ratio adjust for 2.73-5.38 * Read and clear DTC's * Smartphone app control for Android and IOS * Check emissions readiness status * Enable transmission gear display in Drive Mode * Enable/disable traction control kill * Remember previous Tow/Haul setting on start up *This device is not a power adding device, it is not changing ECM calibrations, and is easily removed for dealer service
( 2 )
$499.95
$448.95
On Sale
Do you need to upgrade your ignition system due to a recent Sniper EFI installation, but have no idea which option is best? Introducing Holley Sniper EFI HyperSpark distributors. These billet distributors use a hall-effect crank signal sensor, providing a noise-free RPM signal to the Sniper ECU. HyperSpark distributors include a patented clear installation cap that eliminates any confusion when installing the distributor. They're an easy plug-and play solution to add timing control and complete your Sniper EFI installation. Many options are available; choose the model recommended for your year/make and engine application.
( 127 )
$449.95
—
$499.95
$403.95
—
$448.95
On Sale
The Bully Dog GT Gas tuner unlocks more horsepower and torque to meet the unique demands you put on your vehicle. With preloaded tuning, customizable gauges to track performance, and a wide variety of hauling and off-roading features, you'll have plenty of power to take on tough jobs or improved fuel economy for long highway hauls. Space for up to 10 custom tunes helps you adjust for the many ways you put your vehicle to the test.
( 30 )
$469.00
$328.48
On Sale
DiabloSport inTune i3 is their third generation of computer programmers, delivering the same great power, features, and application coverage that has established DiabloSport as must-haves for performance enthusiasts. The inTune i3 units, while designed to keep drivers equipped with added horsepower and torque, are also available with 50 state certification. DiabloSport has bundled performance and compliance to offer more for your car, SUV, or truck—paired with the assurance of knowing you're covered at your local smog or emissions center. There's no need to sacrifice power when you choose DiabloSport inTune i3 computer programmers. Order the model designed for your vehicle application. Key features of DiabloSport inTune i3: * Vehicle licenses available to tune multiple vehicles with just one device * New intuitive online update software to keep your i3 current with extended coverage/features, add an extended product warranty, and more * Industry-leading vehicle application coverage for thousands of cars, trucks, Jeeps, and SUVs * Update on the go with Wi-Fi connectivity
( 28 )
$464.95
$417.95
On Sale
Superchips Flashpaq F5 Pro tuners put your vehicle's tune in your hands. These handheld devices read stock vehicle files and load custom-tuned files built through HP Tuners custom tuning software (there are no pre-loaded tunes). Find your favorite HP Tuners dealer and work with them to build the perfect tune for your setup. F5 Pro devices will hold up to four custom tunes and monitor/log up to eight vehicle PIDs. No matter what aftermarket parts you've installed, you can deliver power levels designed specifically for the upgrades you have added to your ride. Superchips Flashpaq F5 Pro tuners feature high-definition color screens and were designed with simplicity and functionality in mind—making it easier than ever to select your custom power level and have instant horsepower gains and drivability improvements!
( 8 )
$449.95
—
$599.95
$403.95
—
$538.95
On Sale
Pertronix Flame-Thrower stock look cast distributors are loaded with all of the features that you would expect from a high performance part, and yet they maintain the original look, for the ultimate "sleeper." Pertronix builds each distributor with all-new components, not from remanufactured parts like some companies do. No longer will you need to hassle with adjusting points or replacing capacitors, because these distributors are equipped with maintenance-free Ignitor electronics, providing decades of trouble-free operation. Each distributor is complete with a high-quality cap and rotor, so you're ready to run right out of the box. Stock look distributor features include: * All-new lightweight cast aluminum housing, modeled after the original Delco and Motorcraft distributors * Hardened gear ground to exact tolerances for precise mesh with cam * Adjustable vacuum advance canister, providing extra tunability * Optimized phasing to ensure maximum energy to the spark plug * Tailored advance curve for optimal performance and drivability * Integrated electronic ignition--available with solid-state Ignitor or the powerful Ignitor III with built-in adjustable REV limiter and multi-spark through redline * High dielectric strength cap and rotor with brass contacts
( 254 )
$368.15
—
$398.40
$331.34
—
$358.56
On Sale
MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and maximum output voltage. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.
( 641 )
$401.95
—
$499.95
$301.95
—
$324.95
On Sale
DiabloSport Predator 2 Platinum programmers are your custom tuning devices for both diesel and gas cars, trucks, and SUVs. Their P2 Platinum units offer the perfect tuning solution for enthusiasts that plan to add future upgrades, or have already upgraded their vehicles with aftermarket performance parts. They come pre-loaded with performance tunes designed to make the most of the stock setup and simple bolt-on parts like an intake or exhaust. When the serious mods come out, the DiabloSport P2 Platinum programmers really shine! Their nationwide network on CMR custom tuning dealers can write a custom tune designed with your mods in mind to make the most power possible! With custom tuning solutions available from DiabloSport's network of CMR dealers, you can tune for basically any upgrade you can think of. With their simple drag and drop custom tune loading process, you can be tuning your custom built ride in minutes. Predator 2 programmers now pair impressive data logging capabilities with the ability to store over 10 custom tunes on the device. You can keep multiple tunes on hand for any track condition or driving situation. With the easy-to-use, handheld design, you can tune in minutes and transform your ride into a Predator! Features include: * Pre-Loaded tunes for multiple driving styles * Easy-to-navigate user interface * New design with a slim, sleek, case that fits in the palm of your hand * Stores custom tunes, from third party dealers, using DiabloSport's CMR tuning suite * Store multiple tunes on device * Monitor and log up to 16 plus vehicle parameters * Reads/clears diagnostic trouble codes * USB connection for updates and downloads * Offline drag and drop tune installation
( 19 )
$519.95
$466.95
On Sale
A better design--Edge Evolution CS2 programmers for gasoline-powered vehicles have advanced looks and features to wake up your rig's performance and style. Not only that, but these super-sleek, in-cab monitors and programmers deliver the best bang for your buck! Evolution CS2 units will retune your ride with multiple power levels created by a team of engineers to increase horsepower and torque. You can install them in minutes without popping your hood, and they mount in your cab for continuous real-time monitoring of vital engine data, delivering a complete gauge package. The full-color, high-resolution, button-controlled screens are easy to view, easy to use, and offer high-tech looks. Introduce Edge innovative DNA into your rig's computer through their Evolution CS2 programmers and grow your truck's performance in many ways.
( 14 )
$499.95
$448.95
On Sale
DiabloSport's PredatorX is the ultimate mobile tuning solution, and now includes a PCM swap. When you connect PredatorX to your vehicle it will gather the info required for the PCM swap and direct you to the swap form right through the app. DiabloSport PredatorX tuners deliver the latest in tuning technology, allowing you to take control of your tuning needs from your smartphone. The iOS/Android compatible apps pair with PredatorX to give you complete tuning access, and the OBDII dongle can stay connected to the vehicle full time, so you're always just seconds away from being able to make tuning changes. Preloaded with power adding tunes for multiple octane levels, they also offer transmission tunes for applications where they are needed. For those seeking more than the tunes provided, there is a plethora of end user based parameters that can be adjusted. Speed limiter, tire size, timing and fueling at wide-open-throttle, rev limiters, idle speed and so much more can be adjusted through the PredatorX. Select the tuner designed for use with your vehicle. Features and benefits: * Add horsepower and torque * No vehicle downtime * Preloaded tunes for multiple octanes * Transmission tune included * Disable MDS * Calibrate speedometer for taller tires * Set axle ratio if you've swapped gears * Disable traction control/ESP * Set target ECT for cooling fans * Disable Auto Start-Stop * Remove speed limiter * Adjust idle speed * Raise rev limiter in drive or neutral * Live data monitoring * Read/clear diagnostic trouble codes (DTCs) * Bypass harness included where applicable
Not Yet Reviewed
$419.95
—
$439.95
$376.95
—
$394.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
