Availability
Showing In Stock Items. Show All 10 Items.
On Sale
Collect the data you need with these Edge universal sensor input harnesses. These harnesses are designed to read any 0-5 V signal and convert it into useful data that can be displayed on your Edge CS or CTS. Using one of these Edge universal sensor input harnesses will allow you display a variety of custom gauges and values on your CS or CTS programmer, making it an even more versatile tool for your vehicle.
Not Yet Reviewed
$240.95
$216.85
On Sale
AEM Electronics 6-Channel CAN sensor modules provide an affordable and easy way to add temperature, pressure, fuel level, and tachometer signals on to your CD Carbon Digital dash through AEMnet CAN bus. The modules support the Bosch CAN 2.0b standard, making it compatible with many third-party devices that accept a programmable CAN bus input, which also allows you to add additional channels to a non-AEM ECU, dash, or logger. Features include: * Two temperature (thermistor) inputs * Two dedicated 0 to 5 V analog inputs * One dedicated fuel level input (0 to 250 Ohm range) * One tachometer/coil input * Fixed CAN bus speed, header length, and base address * IP67 potted enclosure/sealed connector—dust-tight and protected against water spray * Protected inputs * 12-pin DTM-style connector and pins
Not Yet Reviewed
$189.95
$170.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak analog pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or components you want your V-Net system to monitor.
( 13 )
$229.95
—
$368.95
$126.95
—
$202.95
On Sale
Holley offers quality service parts for use with the Holley 8-channel EGT monitoring kits, including EGT (Exhaust Gas Temperature) probes. These thermocouple sensors provide the perfect solution for viewing and logging various temperatures, including exhaust gas and cylinder heads, to keep you in-the-know of what exactly is going on in your engine. Select the probe needed. Features and specs include: * Stainless steel over-braid cable with lead and pre-terminated connector * 1/4 in. EGT probes (pyrometer type) * 90-degree, open-end tip * Available with different length harnesses
Not Yet Reviewed
$125.95
$113.35
On Sale
Racepak SmartWire switch panels are made from aluminum and then black anodized for a professional appearance. They're linked together via a single cable to the switch panel's connector located on top of the SmartWire housing.
Not Yet Reviewed
$369.95
$203.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The V-Net system uses modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves the proper incoming signal and allows other signals to pass through. The sensor measures the input from the function or device (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. These pressure or temperature module/sensor combinations are the same as Racepak analog pre-programmed V-Net modules with sensors except that they have NOT been pre-programmed. Racepak analog programmable V-Net modules with sensors must be programmed using the Configuration File in Datalink software (not included).
Not Yet Reviewed
$329.95
$181.95
On Sale
Racepak's Vehicle Network (V-Net) is a "smart data" transfer network able to transmit multiple signals from sensors over a single cable. The key to the V-Net system is the modular connectors that attach each of the devices to the main cable. For a function or component to be monitored on the V-Net, the signal from that device must pass through a sensor and its module (essentially a miniature computer) that identifies and retrieves only the proper incoming signals and allows other signals to pass through. The sensor measures the input from the function or component (i.e. rpm, pressure, temperature, etc.), while the module converts the signal so it can be transmitted over the V-Net. Racepak digital pre-programmed V-Net modules with sensors are programmed to collect specific data and are ready for plug-and-play installation on the V-Net cable. Browse through the various types to determine which functions or devices want your V-Net system to monitor.
Not Yet Reviewed
$349.95
$192.95
On Sale
MSD Power Grid exhaust module sensors are offered as replacements and enhancements for your module. Maintain the ability to obtain accurate data with replacement 0 to 75 psi exhaust back pressure sensors, or expand your module's abilities by adding an optional second pressure sensor with harness for dual turbo applications. Keep the operation of your Power Grid exhaust module at an optimum level with genuine MSD accessory sensors.
Not Yet Reviewed
$147.95
$110.95
On Sale
For your data recorder to be able to monitor an analog channel it must receive a signal that it can recognize. The Racepak Module PT2 convert the analog parameters to a standard 0-5 volt signal required by the recorder. The transducer module (combination sensor and signal conditioning modules) provides direct connection to the measured parameter, such as fuel or oil pressure. The signal conditioning module allows the connection of remote sensors, such as thermocouples or position sensors, to the data recorder.
Not Yet Reviewed
$399.95
$219.95
On Sale
When using a Racepak Pro Analog transducer box, Racepak plug-in, old-style, transducer modules are used to convert the input from various analog functions into signals that can be recognized by the recorder. Where required, a special cable is needed to connect the sensor to the transducer or signal conditioning module. Available modules include: * Pressure transducers, in ratings of 0 to 15/60/100/150/300/500/750/1500 psi * Vacuum transducer, 0-30 in. Hg * Battery voltage, 0-20 V input * Thermocouple amplifier, 0 to 500 degrees F * 0 to 5 V input, outputs 5 V to powered sensor * 0 to 5 V input, outputs 12 V to powered sensor
Not Yet Reviewed
$399.95
$219.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
