Availability
Showing In Stock Items. Show All 55 Items.
On Sale
The chrome plated MSD coil brackets offer easy, universal mounting for standard size ignition coils up to 2 1/4 in. diameter, including all MSD Blaster Coils.
( 113 )
$13.76
—
$15.74
$12.38
—
$14.17
On Sale
ACCEL HEI power pigtails clean up your engine bay. For GM HEI coil-in-cap, these connectors eliminate the use of single spade connectors that are prone to falling off and killing your ignition. ACCEL pigtails with high-temperature connectors offer a positive fit with a locking tab and shark fin to ensure that the connection between your wiring and HEI stays intact. They house two 10 in. lead wires, one bright red for your 12 V key-switched wire, and the other green for your tachometer.
( 145 )
$19.50
$17.55
On Sale
MSD ballast resistors are just the ticket to connect your MSD coil to your stock points ignition system.Connect your coils the safe and secure way with MSD.
( 33 )
$20.46
$18.41
On Sale
MSD boots are designed with longevity in mind. Each boot provides excellent heat resistance, as well as maximum protection against spark loss.
( 129 )
$11.78
—
$15.74
$10.60
—
$14.17
On Sale
Are you tired of jiggling your ignition key to get your engine started? Replace that worn-out ignition switch with a quality reproduction piece from Scott Drake. Scott Drake manufactures these switches from stock specifications for maintenance-free operation.
( 17 )
$22.55
$20.30
On Sale
Scott Drake spark plug wire separator sets are designed to fit directly on the valve cover clip. These robust ABS plastic separators will hold both standard 7mm and high performance 8mm wires. Scott Drake separator sets are offered in a choice of colors to best complement your ride's under-the-hood style.
( 31 )
$17.79
—
$21.45
$16.01
—
$19.31
On Sale
These Scott Drake battery hold-down J-bolt kits include the correct length J-bolts and nuts to properly hold the battery down in place. They are available in your choice of standard steel or durable stainless steel.
( 30 )
$18.99
—
$23.75
$17.09
—
$21.38
On Sale
MSD cylinder markers will not only save you time, but ensure that your plug wires will always be in the right place. They'll withstand underhood temperatures, they come with a tool that makes installation effortless, and they're available in two sizes.
( 25 )
$17.06
$15.35
On Sale
MSD's two pin connector kits replaces damaged connectors or aids in custom wiring. This is the same connector used on MSD's magnetic pickup harnesses. Each kit comes with two connectors and four pins.
( 15 )
$14.42
$12.98
On Sale
Mr. Gasket LS starter bolts are offered in three versions to cover the two different starter styles. Whether your starter needs two long bolts or one long and one short bolt, these kits will provide exactly what you need. Mr. Gasket also offers these metric starter bolts in a set of three with two long and one short bolt to cover all applications. The bolts are zinc plated steel with knurling to improve alignment of the starter. The correct LS starter bolts can be hard to find, but your search can end happily with Mr. Gasket.
( 3 )
$18.33
—
$22.21
$16.50
—
$19.99
On Sale
Holley split wire looms direct from the Holley EFI Wiring Shop. These are high-quality TechFlex F6 black nylon braided split looms they utilize on their main harnesses. They are available in two lengths and a range of diameters from 1/8 in. to 2 in. to build or service your Holley EFI-powered machine.
( 30 )
$14.44
—
$19.72
$13.00
—
$17.75
On Sale
MSD replacement plug wire boot and terminal kits are perfect for enthusiasts who build their own wire sets or need to replace damaged boots. The boots are made from a high-temperature silicone compound and feature a gray finish. The terminals have large crimp tabs to grasp the wire, and wide contacts to grip the distributor cap receptacle.
( 103 )
$14.42
$12.98
On Sale
MSD Chevrolet distributor O-ring kits are designed to fit onto the lower shaft of the distributor, just above the gear. They are made of high-grade rubber and will keep the distributor shaft securely in place at operating rpm.
( 4 )
$21.05
$18.95
On Sale
Since you're installing that new distributor, you'll need to hold it down with something. Why not use one of Mr. Gasket's hold-down distributor clamps? Made from heavy gauge steel, these clamps are the perfect way to dress up the engine compartment.
( 27 )
$15.23
$13.71
On Sale
MSD has the replacement distributor parts that you need. Don't replace a worn or broken part with another substandard piece. MSD is on the leading edge of production and design and they have one of the strongest reputations in the industry. Look to MSD for reliability, consistency, and the quality products that your ride deserves.
( 22 )
$21.05
$18.95
On Sale
These curve kits allow your distributor to reach full advance more quickly (between 2,000 and 2,800 rpm), delivering maximum power and engine acceleration.
( 43 )
$12.44
—
$22.18
$10.66
—
$19.96
On Sale
Scott Drake ignition coil brackets are produced to original Ford specifications. These original-style brackets are capable of holding original-style coils, as well as those smaller coils on the market today. Scott Drake ignition coil brackets are offered in a choice of finishes and include a zinc plated head bolt and nut.
( 21 )
$20.17
$18.15
On Sale
Holley offers MAP sensor adapters for a variety of Chevrolet LS engine applications from 1997 and up. They feature pre-terminated connectors and wiring for a direct plug-and-play installation. Depending on the model you select, the adapter will allow: * The installation of an LS3 MAP sensor in an LS2 or LS1 equipped vehicle * The installation of an MPFI WeatherPack 3-pin connector MAP sensor to the 3-pin Delphi GT connector * The installation of a Delphi MIP 3-pin connector MAP sensor to the 3-pin Delphi GT connector
( 20 )
$36.00
$19.80
On Sale
Get your points system working like new Mallory replacement condensers for their electronic and points style distributors contain special windings to protect your points from pitting, and moisture-proof seals to maximize ignition reliability.
( 8 )
$14.56
—
$18.58
$13.10
—
$16.72
On Sale
Scott Drake offers battery trays in vehicle-specific options, as well as universal and options designed for Optima batteries. They are available in strong steel or billet aluminum. Whether you need an exact replica of the original or just something better than what you already have, Scott Drake's selection of battery trays should provide what you are looking for.
( 28 )
$21.37
—
$23.52
$19.23
—
$21.17
On Sale
When your alternator pulleys are perfectly aligned with each other (fore and aft), they will operate more efficiently. Scott Drake alternator spacers will help you achieve the correct alignment. They're anodized extruded aluminum and sold individually for your application. Spacers should solidly support your alternator without allowing it to twist or slide "in" toward the engine.
( 5 )
$14.23
$12.81
On Sale
Scott Drake offers electrical switches for a dozen functions on your classic car—everything from brake lights and fog lamps, to blower motors and HVAC controls. These replacement switches are available in a variety of actuation styles. They are OE-quality and use a normal 12 V power supply. Order the model needed for your application.
( 16 )
$11.70
—
$14.33
$10.53
—
$12.90
On Sale
Mallory constructed these distributor rotors from an innovative, space age plastic that combines the high dielectric strength required for today's high-energy ignition systems and high impact-resistant qualities to prevent damage. Plus, they use corrosion-resistant brass inserts and stainless steel rotor springs to provide an unrestricted energy flow.
( 38 )
$22.49
—
$30.81
$16.95
—
$20.24
On Sale
Keep an eye on your X4 and the road ahead with SCT suction cup mounts for your windshield. These mounts securely hold your programmer with an industrial-strength suction cup, allowing you to safely monitor critical system data without blocking your view. You don't want to hold your X4 while driving, and often there's no passenger to assist you. The solution is quick, easy, and economical--SCT suction cup mounts.
( 6 )
$22.99
$21.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
