Availability
On Sale
If you're the kind of guy or gal that likes to keep things minimal and still get the job done, the Milwaukee low-profile backpacks are a great way to keep your go-to tools close at hand and ready to go. The low-profile backpacks are constructed of durable 1680-denier ballistic material with rugged metal zippers that provide unmatched durability. With 22 pockets, including a padded electronic sleeve, these low-profile backpacks provide ultimate organization. The padded and breathable load-bearing harness evenly distributes the weight for unsurpassed comfort, as well as jobsite performance with two times more padding than competitive units. Key features: * Reinforced base * Rugged metal zippers * 5x more durable * 2x more padding * Padded electronics sleeve * Load-bearing harness evenly distributes weight * 22 total pockets (4 external pockets and 18 internal pockets) * Sternum strap * Tape measure clip * Attachment strap for dollies
Not Yet Reviewed
$84.97
$74.97
On Sale
Ensure your drinks and food are cold no matter where your adventure takes with you with Summit Racing™ battery backup portable refrigerators/freezers. Each fridge-freezer model features a high efficiency LG Brand DC inverter compressor and conversion module for high reliability, long life, and a wide range electronic temperature control. A fluoride-free insulation is used for good heat preservation performance and low energy consumption. The 12/24 V DC and 110 V AC power supplies allow use in both the car and at home. Summit Racing™ battery backup portable refrigerator/freezers also feature an intelligent car battery protection system and compressor delay protection for worry-free operation. Product features: * 15600mah capacity removable battery * Solar charging port * Telescoping handle * Cutting board included * Reversible door can be used on either side * Rugged wheels * Less than 45 dB noise level for quiet operation * Integrated cup holders and bottle opener * Estimated 4 to 8 hour run time depending upon ambient temperature, setting, and how often the door is opened
( 2 )
$501.99
$449.99
On Sale
Ensure your drinks and food are cold no matter where your adventure takes with you with Summit Racing™ portable refrigerators/freezers. Each fridge-freezer model features a high efficiency DC inverter compressor and conversion module for high reliability, long life, and a wide range electronic temperature control. A fluoride-free insulation is used for good heat preservation performance and low energy consumption. The 12/24V DC and 110VAC power supplies allow use in both the car and at home. The Summit Racing™ portable refrigerator/freezers also feature an intelligent car battery protection system and compressor delay protection for worry-free operation.
( 30 )
$240.99
—
$320.99
$199.99
—
$299.99
On Sale
EMAX Industrial Plus Silent Air piston compressors are quiet. The most common complaints about compressors are their high noise levels. EMAX Silent Air units not only still the noise, but they also do it with a big cfm output and lower rpm. Featuring their Whisper 100 system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling intake air through a series of baffle plates and prefilter media inside the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer structure; plus, it also provides secondary filtration for cleaner air. Industrial Plus Silent Air piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with a built-in fan. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. All EMAX Industrial Plus compressors have low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Their 15 Service Factor means the motors can be pulled 15 percent over full load. Depending on the application, many Silent Air piston compressors feature totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulates out of the motor. This allows them to be used in dusty commercial and industrial environments without worrying about maintenance. They have 100 percent copper windings with pre-wired magnetic starters (necessary on any motor over 15 amps). These are high-quality, name brand, premium efficiency motors that meet all UL and CSA requirements. Some lower horsepower models are equipped with name brand, open-drip (OPD) motors. The running and starting windings on these motors are all 100 percent copper-wound for premium efficiency, reliable performance, and durability. These units also meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Plus Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * Raised-pump mounting platforms that open the underside of the crankcase to cooling air flow * Automatic belt tensioners for much easier and quicker adjustments and alignment * Selectable continuous-run or automatic start/stop operation to maximize performance and reduce wear * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Dual-timer automatic tank drains eliminate maintenance * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 16 )
$3,707.88
—
$7,204.82
$3,522.49
—
$6,844.58
On Sale
Traxion ProGear Wide Body Creepers feature a wide, contoured, padded deck that has nearly 20 percent more space than standard professional creepers. They also feature extra-large 5 in. casters for extreme mobility. Their frame outriggers allow them to have low clearance despite their extra-large casters. Their outrigger design also eliminates the possibility of your creeper tipping onto its side, and their large casters allow them to roll over obstacles that would normally stop standard creepers. If you're looking for a creeper with more room and stability, with the same great clearance as standard creepers, these Traxion ProGear Wide Body Creepers have it all.
( 52 )
$107.99
$97.19
On Sale
Traxion ProGear carbon-fiber simulated race seat mobile workstations have a stylish and functional design to provide maximum comfort for any mobile technician for extended periods of use. The large gear tray, which looks like a gear and spins on its axis, makes it easy to quickly and easily locate tools or parts. No more searching through cluttered toolboxes or workbenches! Exclusive to this ProGear seat model are the 5 in. casters, constructed of polypropylene plastic. These large casters provide best-in-class mobility, allowing the mobile technician to roll over rough terrain, small parts, cords or hoses, and other obstacles that would topple a more conventional roll seat. The adjustable seat height can get down to a low level for jobs such as brake work, thanks to an exclusive drop sleeve design, which is only available in the ProGear model. This feature allows for maximum flexibility and versatility, making the Traxion race seat an excellent choice for a wide variety of tasks. Carrying this unit around is a breeze, thanks to the handle built into the racing seat backrest. These ProGear seats are available in a solid carbon-fiber simulated material. Product Overview: * Stylish and functional design with a racing seat look * Comfortable to sit-in for extended periods of time * Built-in handle provides one-handed carrying * Large Gear tray spins for easy access to tools and parts * Best-in-class mobility with five 5 in. casters * Five-spoke frame is OSHA compliant * Drop sleeve design allows adjustable height to a very low-profile * Adjustable seat height from 13 1/2 inches to 17 1/2 inches
( 1 )
$171.99
$154.79
On Sale
Traxion King Crawler creepers are like no other creepers on the market! These "all-terrain" 400 lb. capacity creepers feature 1 in. of ground clearance and a low center of gravity on four "super-large" 5 in. swivel casters. Their premium axle bearings and oversized casters allow for easy rolling over air hoses, cords, bolts, etc., so the frustration of rolling and suddenly locking up is eliminated. Their large 13 x 38 in. deck is cushioned and covered with industrial-grade vinyl and has a 2 in. thick padded head support. Traxion King Crawler creepers come completely assembled.
( 7 )
$107.99
$97.19
On Sale
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial Silent Air piston compressors are quiet. One of the most common complaints about compressors is noise. EMAX Silent Air units not only quiet the noise, they also do it with big cfm output and lower rpm. Featuring their Whisper silent air system installed on the back of the tanks, stationary compressor dB ratings are reduced by as much as 25 percent. The Whisper dissipates compressor intake noise by channeling the intake air through a series of baffle plates and prefilter media within the silencer cabinet. Piston intake noise is trapped and dissipated within the silencer; plus, it provides secondary filtration for cleaner air. Industrial Silent Air compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Silent Air compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. They also yield low harmonic distortion, provide much higher torque in cold weather starting, and require less electricity to start. Other features include big 1 3/8 in. output shafts, large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. Their 15 Service Factor means the motors can be pulled 15 percent over full load. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX Industrial Silent Air piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved belt guards for your safety * ASME code-compliant tanks * Taper lock 2-groove pulleys * Dual 2-groove belts for long life and low vibration * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings
( 1 )
$2,647.88
—
$4,131.88
$2,515.49
—
$3,925.29
On Sale
Traxion WideBody creepers are the ultimate tools for comfort and mobility in your workshop. With huge 5-in. polyurethane casters, they glide smoothly over any rough or uneven surfaces, making them the perfect choice for mechanics who need to move around their workspace easily and quickly. The outrigger frame provides a low profile, ensuring that you can get to even the tightest spaces with ease, while the wide body drop deck is designed to eliminate torso pinch points, ensuring maximum safety. The deck is extra wide and extra padded with built-in lumbar support, providing superior comfort and reducing fatigue, even when working for extended periods of time. With sturdy construction, innovative design, and superior performance, shouldn't a Traxion WideBody creeper be in your shop/garage?
Not Yet Reviewed
$123.99
$111.59
On Sale
Offering the same quality and durability as their Industrial Plus Series (without the extra cost of some features), EMAX Industrial piston compressors are designed for up to 50,000 hours of commercial or industrial use with proper maintenance. At the core of these extremely durable compressors are super-quiet pumps featuring cast iron crankcases, precision-balanced cast iron crankshafts, and high-quality stainless steel roller bearings to ensure smooth, efficient operation. For long life and rebuildability, EMAX adds steel connecting rods with replaceable rod bearing inserts, removable cast iron cylinders and cylinder heads, disc intake and exhaust valves, and cast iron flywheels with built-in fans. These bigger low-rpm pumps have a larger bore and stroke, so you get big cfm output with reduced friction and heat buildup. Industrial Series compressors have name brand, open-drip (OPD), low-rpm motors (1,750 rpm). Because of their higher torque factor, compared to the 3,450 rpm motors most manufacturers use, they run much cooler. With low harmonic distortion, these motors provide much higher torque in cold weather starting, and require less electricity to start. Other features include large starting and running capacitors, and dynamically balanced armatures. Running and starting windings are all copper-wound for premium efficiency, reliable performance, and durability. These motors meet all UL and CSA requirements and include pre-wired Condor combination starter and pressure switches with actuation-type diaphragms. EMAX uses only taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts to drive their pumps. Dual belts ensure long belt life with low vibration for smoother, quieter operation because dual belts do not have to be as tight as a single belt. Tighter belts put more load on the compressor pump and the motor bearings; that decreases the life of both. Much better than a fixed bore pulley with a set screw; the taper-lock design locks the pulley in position on the motor shaft preventing it from loosening or moving. EMAX piston compressors also feature: * Head unloaders allow for load-less starting and can help cool the pump in high-duty cycle applications * Built-in inter-coolers and after-coolers * OSHA-approved, 13-gauge steel, expanded metal belt guards * ASME code-compliant tanks * Extended tank water drain pipes plumbed to the front with 1/4 in. ball valve handles * 100 percent brass check valves, safety valves, and ball valves * Top-quality plumbing fittings * Big 1 3/8 in. output shafts * 15 Service Factor motors can be pulled 15 percent over full load
( 2 )
$3,283.88
—
$9,792.28
$3,119.69
—
$9,302.67
On Sale
For most of its 40 years, the 1970 Chevrolet Chevelle SS454 LS6 has been doing exactly what it was built to do: tear up the drag strip. Along the way, it's become arguably the most famous drag racing Chevelle ever, capturing the SS/DA class record in 1972 and setting an elapsed time of 10:75 at 123 mph on the way to winning Top Eliminator 14 of 16 events at Bradenton Dragway in Florida in 1976. Purchased new by A/FX racer Bob Hamilton as a Valentine's Day gift to his wife, the big-block beast was soon spending its Sundays at the local drag strip with Hamilton at the wheel. Sponsored by AMT and dubbed "Red Alert," it began its long and extremely successful career in 1971, setting the SS/DA national record during the 1972 season and owning the track record at New Jersey's Island Dragway for over two years. Hamilton sold "Red Alert" in 1976 to racer Terry Carney who, in 1990, partnered with Bill and Jan Stephenson to reintroduce the car to a new generation of fans and a new career in popular nostalgia drag racing. The car has since run the quarter mile in the low tens at over 130 mph. A true drag racing legend in every sense, the "Red Alert" Chevelle has always been expertly maintained and remains in splendid condition. It is almost entirely as Hamilton raced it, retaining its original sheet metal and interior and most of its original Cranberry Red paint. This replica 1:18 scale 1970 Chevrolet Chevelle LS6 Red Alert drag car diecast model features opening doors, hood, and trunk; poseable steering; detailed interior; tilting front seats; 454 wired and plumbed engine; drag wheels and tires; diecast metal body; fully detailed chassis; and serialized license plate. The collector's car is one of only 600 produced. Own a piece of racing history!
( 1 )
$139.95
$109.50
On Sale
EMAX rotary screw compressors distribute the quietest, most dependable air technology with programmable control! Utilizing innovative product design, the highest quality components, and professional workmanship, EMAX compressors provide you with the features you want and the energy efficiency you need, backed by one of the best warranties in the industry. EMAX energy-efficient rotary-screw air compressor features: * State-of-the-art screw air ends have precision-aligned, back-to-back, tapped roller bearings with close tolerances to guarantee long life cycles and outstanding reliability * Each air end is tested to meet consistent high-quality standards * Premium industrial high-efficiency motors constructed with superior materials, higher service factors, longer bearing lives, lower waste-heat output, and less vibration * Drive-Tek design reduces energy demand up to 33 percent * Variable speed soft-start motors provide reduced energy demand and amp-draw on start-up * Spin-Tek design offers unique, easy access to oil filters and air/oil separators—requires no tools to remove/install, saving you time and money * Heavy-duty sound attenuated cabinet provides lower decibel operation than a typical rotary screw * Programmable logistic controller—user-friendly Logika PLC features variable speed control, adjustable pressure range, low oil shutdown, reverse fault, high-voltage fault, over-amp shutdown, hour meter, fault history, maintenance service schedule, air differential control, built-in timer, on-line demand, self-start, and master slave; plus clock and date settings, daily/weekly scheduling, and a built-in light.
Not Yet Reviewed
$8,438.66
—
$15,474.94
$8,016.73
—
$14,701.19
On Sale
Save that energy! When a motor starts at full load voltage it causes a voltage sag on the power system and can cause shock damage creating long-term damage to your motor. EMAX energy-efficient direct-drive rotary screw air compressors have variable frequency drives installed allowing a savings of 25 to 70 percent energy. EMAX energy-efficient direct-drive rotary screw air compressors are built to exacting standards, providing years of dependable service under demanding conditions. And because they use only high-quality OEM components, they offer a full 10-year warranty on the rotary screw pump and a 5-year warranty on the motor and all other components with the purchase of their oil and filters to ensure the correct oil with the specs needed is used for optimal operation. The heart of these compressors are the air ends—the part of the machine that actually compresses the air. EMAX uses only the best German and Finnish name brand air ends that are good for up to 70,000 running hours with only routine maintenance and the correct oil. Also, EMAX uses only premium, high-efficiency industrial motors to run the compressors delivering units with higher service factors, longer bearing lives, lower waste- heat output and less vibration. EMAX direct-drive rotary screw air compressors offer a lot of functionality, including a user-friendly Logika Programmable Logic Controller (PLC) that makes the units bulletproof, and allows easy, intuitive scheduling and operation of the compressor. Key features and benefits: * Ultra-quiet rotary screw operation -- Delivers enhanced reliability with ultimate energy efficiency -- Drive-Tek reduces energy demand up to 33 percent for huge savings -- Continuous 100 percent duty cycle operates at normal conversation level * Premium Industrial TEFC direct-drive motor -- Runs at 1,750 rpm for less wear and tear -- No belt maintenance and longer bearing life for worry-free performance * Variable speed soft start -- Reduces energy demand and amp draw on startup -- Creates less heat to increase compressors lifetime * Precision-engineered rotary air end -- Highly efficient design provides maximum discharge * Advanced Programmable Logistic Controller (PLC) -- Easy-to-use remote with timed start/stop and low oil shutdown -- Monitors maintenance, temperature, oil level, filtration, hours, and much more * Heavy-duty sound attenuated cabinet -- Offers lower decibel rating with easy access to critical components -- Designed for use with stationary air receiver (not included) -- Air receivers can be purchased separately to meet your specific needs * Spin-Tek -- Unique tool-less oil filters and air/oil separators -- Genuine Mann filters reduce air end contamination and harmful elements
Not Yet Reviewed
$38,691.06
—
$84,457.62
$36,756.51
—
$80,234.74
On Sale
EMAX Industrial Plus gas-powered piston compressors deliver overwhelming performance to meet the needs of the most demanding environments. Their pumps require less maintenance, service, and downtime—and all EMAX gas-powered compressors furnish the power needed at the jobsite, garage, or shop. These units have ASME-approved air receivers and custom-built engine stands that brace the platform of the tank, allow easy belt tightening, and significantly reduce vibration. Many competitors' pumps run at double the rpm of EMAX pumps because they are much smaller and must run fast to produce enough air. EMAX Industrial Plus pumps have solid cast iron cylinders, cylinder heads, crankcases, flywheels, crankshafts, and rebuildable, forged steel connecting rods. They have large roller bearings on the crankshaft ends for stability and long bearing life. Disc intake and exhaust valves are sealed by O-rings and can be removed without disturbing the head gaskets. When it came to engines, the obvious choice for EMAX was the Honda GX Series with electric starters. Their OHV design provides excellent torque and fuel efficiency, quiet operation, and they're easy-to-use. Built for efficient airflow, effective cooling, and durability, with a slant cylinder design for smooth running—they feature mufflers with spark arresters, hydraulic valve lifters, low oil shutdown, automatic compression releases for easy starting, key switches, and battery chargers. EMAX's Honda GX engines also have engine idle-down (when the compressor is in free-wheel mode) and, with electronic ignition, excellent cold weather starting ability. Additional features of EMAX Industrial Plus gas-powered piston compressors include: * 1/4 in. ball valve drain at the front of the tank for easy access * Quality tank gauge; all safety valves and pop-offs are ASME-approved * 3/4 in. ball valve air outlet * Custom-built, heavy-duty 13-gauge expanded metal belt guard * 35 percent lower operating temperatures—reduces moisture buildup and extends pump life * Air-Stream technology provides up to 50 percent longer pump life * Intercooler and aftercooler lines to cool the air between stages and after the 2nd stage (where applicable) * Raised platforms pull air under the pumps * "V" or "W" pump shapes help eliminate hotspots and provide consistent cooling * Site glass to view oil level * Twin belts offer better belt grip and longer belt life * Head unloaders allow for load-less starting and help cool the pump in high-duty cycle applications * Pre-tested before they leave the factory * Just add a 12 V battery and battery cables and they're ready to go
Not Yet Reviewed
$4,554.82
—
$7,416.82
$4,327.08
—
$7,045.98
On Sale
EMAX carries a large selection of air compressor tools including Airbase impact drills. These air-powered tools are engineered for tough precision automotive, woodworking, and industrial projects at home, in the shop, or on the jobsite, and are available in several drive sizes to accommodate your application needs. Order the model in preferred drive size needed. EMAX Airbase air-powered impact drills feature: * Ideal for drilling, honing, reaming, and hole sawing in steel, aluminum, plastic, etc. * Rugged construction * Industrial-grade Jacob's chuck * Engineered for single-handed use * Durable heat-treated rotor and other moving parts * Heavy-duty TPR handle grip * Advanced vibration dampening design to reduce operator fatigue * Variable-speed control with greater comfort and control * Smooth glide forward/reverse to switch directions with ease * Dual planetary gearing with solid brass bushings * 24-thread double bearing spindle for low run-out
Not Yet Reviewed
$89.36
—
$128.05
$84.89
—
$121.65
On Sale
When you need to lift a ton of weight, Ranger 1 ton TransJaks are the professional's choice. These powerful, multi-tasking--and very reliable--lift systems are essential to repair and service any drivetrain component. Ranger TransJaks offer maximum durability with heavy-steel construction, friction-minimizing steel roller bearings, and an extra-wide base with four heavy-duty swivel ball bearing casters that provide a low center of gravity and exceptional maneuverability. Plus, they're fitted with heavy-duty chain anchors and a failsafe overload system so you can feel secure--even with all of that metal up in the air. TransJaks from Ranger have everything you need to tackle large stuff, yet they're convenient and mobile enough for smaller jobs. More TransJaks features include: * Foot-operated pump * 2-stage design * Adjustable saddle tilts two ways and slides the other two directions * Hardened chromoly ram * Double-sealed hydraulics to prevent contamination for longer service life * Fully adjustable universal saddle adapts to passenger car and light truck automatic transmissions and transaxle assemblies * Fine-thread adjustment screws with oversized knobs make adjusting the table a cinch * 2-stage design provides an extended lifting height of over 73 in. * Two individual push/pull handles for extra handling capability
( 14 )
$1,050.00
$950.00
On Sale
When it comes to your behemoth of a transmission, let Ranger do the heavy lifting! Ranger super-duty 1 1/2 ton transmission jacks have an incredible 3,000 lb. lifting capacity--so they're designed for those jobs when a normal transmission jack just doesn't cut it! Features: * Foot operated pump * Alloy-plated ram * Two-stage design * Extra-wide base * Safety overload system * Adjustable saddle tilts two ways * Saddle slides the other two ways * Heavy-duty steel swivel casters * Two push/pull handles * Heavy steel construction for maximum durability * Sealed hydraulic unit prevents contamination * Double-sealed hydraulics for longer service life * Heavy-duty chain anchors keep loads secure * Two-stage design provides an extended lifting height of over 79 in. * Steel roller bearings are included underneath the table and on the ends of the adjustment screw to minimize friction * Fine-thread adjustment screws with oversized knobs make adjusting the table a cinch * System overload system prevents the jacks from being used beyond their rated capacity * Extra-wide base * Four heavy-duty swivel ball bearing casters provide a low center of gravity and maneuverability
( 2 )
$1,100.00
$1,000.00
On Sale
For the professional carpenter and remodeler, Milwaukee Tools offers M18 FUEL 2-gallon compact quiet compressors. Comparable to normal conversations, they're among the quietest (68dBA) compressors on the market. These 2-gallon air compressors include an ergonomic handle allowing you to carry them vertically. They're compatible with all Milwaukee M18 REDLITHIUM batteries, making it easy to swap packs and finish your job. Features of Milwaukee M18 FUEL compact quiet compressors include: * Low-profile, horizontal stackable design for easy storage and transport around the job site * Can handle up to 1,600 brad nails (18-gauge) per charge (varies by M18 REDLITHIUM battery model used) * REDLINK PLUS intelligence system * POWERSTATE brushless motor
( 1 )
$349.00
$329.00
On Sale
Milwaukee M18 FUEL brushless 1/2 in. drill drivers are compact and powerful, providing enhanced safety and the capability to drill the largest holes at high speed into the densest materials. They are available with tool, side handle, and belt clip or in a kit that will also include M18 REDLITHIUM XC5.0 battery packs, M12/M18 multi-voltage charger, and blow-molded carrying case. Features and benefits: * POWERSTATE brushless motor delivers the power to complete the widest range of applications of any drill driver * Only 6.9 in. in length for the most access in tight spaces * Auto-Stop feature protects from over-rotation in a bind-up for enhanced safety * Equipped with a dedicated Auto-Stop light on foot of tool to indicate a protection event * REDLINK PLUS Intelligence ensures maximum performance and protects against over loading, heating, and over discharge * All-metal 1/2 in. chuck with carbide teeth for maximum durability, grip, and bit retention * All-metal gearcase for ultimate durability * Mechanical clutch for consistency in driving a wide range of fasteners * All-metal belt clip for portability * 1400 lbs.-in. of torque * LED light for better visibility in low-light situations * Using Milwaukee's M18 REDLITHIUM XC5.0Ah battery packs (available in kits) will deliver unmatched performance with the most runtime
( 1 )
$319.00
$229.16
On Sale
EMAX vertical solo-mounted alternating silent expandable airlink systems meet high-demands with "whisper-quiet" performance. These systems are equipped with an advantageous alternating switch that will allow the units to alternate from one pump to another. The units will pump up to set pressure, then under the next start-up sequence the opposing pump will start, eliminating excessive running and allowing the pumps to cool under heavy loads. Plus, if one pump will not maintain set pressure and is not keeping up with demand, then both units will come on and run until the unit hits the pressure setting, after which it will go back into normal alternating mode. EMAX alternating silent air compressors have many features that make them easy to use, from automatic tank drains to belt tensioners. With EMAX's patented Whisper100 silent air onboard, these low-profile systems add four levels of air filtration along with making the compressor quiet, lowering the decibels by more than 35 percent. Key features: * Alternating switch that will allow the units to alternate from one pump to another * Two low-rpm solid cast iron patented pressure lubricated pumps * Two industrial grade 1750 rpm TEFC motors * Two magnetic starters with relay switch * Two ASME certified vertical tanks * Whisper100 Silent Air system * Re-usable oil filter * Oil pressure gauge
Not Yet Reviewed
$11,340.94
—
$11,446.94
$10,773.89
—
$10,874.59
On Sale
Available in several cfm, voltage, and phase combinations, EMAX piston compressor with dryer bundles take the guess work out of pairing a refrigerated dryer with a compressor. At the core of all EMAX compressors are their durable, quiet pumps. They start with cast iron crankcases and precision-balanced, cast iron crankshafts with stainless steel roller bearings for smooth operation, less drag, and lower energy use. Pump rpm is critical to performance and longevity, so EMAX pumps are over-size and run at lower rpm. They still yield high-cfm outputs and the lower rpm reduces friction and heat. EMAX's raised pump platforms elevate the pump for a constant flow of cool air from the flywheel fan to the underside of the crankcase. The cooler oil pulls heat off the pistons and connecting rods--reducing wear and extending pump life. Other pump features include: * Rebuildable steel connecting rods with replaceable rod bearing inserts * Removable solid cast iron cylinders * Cast iron cylinder heads * Disc intake and exhaust valves, come out of the top of the cylinder heads and can be serviced in minutes * Top-quality compression and oil rings * Precision-ground pistons * Premium non-absorbent gaskets * Cast iron flywheels with built-in fans * Built-in head unloaders reduce internal pump heat under heavy workloads * Integral intercoolers and aftercoolers * Copper main feed line EMAX piston bundle packages include name brand, industrial-grade, 1,750 rpm motors … most competitors use 3,450 rpm motors. With their higher torque factor, 1,750 rpm motors run much cooler with low harmonic distortion, provide significantly more torque for cold weather starting, and require less electricity to start. Higher cfm models use totally enclosed, fan-cooled (TEFC) motors that keep harmful dust and particulate out of the interior of the motor for worry-free use in dusty commercial and industrial environments. EMAX bundles are equipped with either a pre-wired Condor combination starter and pressure switch, or a pre-wired magnetic starter--necessary for any motor over 15 amps. Under some applications, compressors cycle on and off constantly; causing excess wear on the contacts. EMAX includes a continuous-run feature for workloads over a 50–60 percent duty cycle. With lower workloads, automatic start/stop operation is best. Additional features of EMAX piston compressors include: * Proprietary automatic belt tensioners for easy and quick adjustment * ASME code-compliant air tanks * Automatic tank drains with integrated dual timers * Top-quality, adjustable pressure switches * Brass check valves with PTFE seating * Brass ASME-approved safety valves * Quality plumbing fittings maintain proper sealing * Brass, high-quality ball valves for air receiver * Front-mounted, extended tank water drain pipes with 1/4 in. ball valves * 13-gauge, expanded metal, OSHA-approved belt guards * Taper-lock style, 2-groove pulleys with dual 2-groove, B-style belts drive compressor pumps EMAX air dryers are energy-efficient dryer systems with refrigerated, non-corrosive inner and aftercoolers and stainless steel heat exchangers. They purify compressed air by chilling it to condense moisture; the condensate is drained away carrying oil and dirt with it. The clean, dry, compressed air minimizes maintenance and repairs; it also reduces internal dryer contamination. UL and CSA-approved with an adjustable hot bypass to avoid without freeze-up. Features and benefits of EMAX piston compressor with dryer bundles also include: * Less corrosion of pipes and tools * Avoid splotches and stains * Designed for maximum performance and dryer life * R134 refrigerant * Built-in prefilter with replaceable element * Active coalescing filter with replaceable element * Refrigerant pressure gauge * Outlet air baffle heater
Not Yet Reviewed
$10,384.82
—
$12,497.40
$9,865.58
—
$11,872.53
On Sale
Traxion Mesh Flex Creepers are the ultimate companion for automotive enthusiasts and professionals alike. Engineered with precision and designed for comfort, these creepers redefine the standard of under-vehicle work. The low-profile design isn't just about aesthetics—it's about maximizing your workspace. With a Traxion creeper, you'll have ample room to maneuver beneath vehicles without feeling cramped or restricted. Crafted with a wide mesh deck, comfort is taken to new heights. Enjoy enhanced airflow and stability while you work. No more discomfort or wobbling – just a steady, supportive surface to rely on. Mobility is key, and each creeper delivers with ease. Featuring huge 5 in. casters made of hard TPR synthetic rubber, you'll experience unmatched mobility across various surfaces. Glide effortlessly from task to task without a hitch. Safety is non-negotiable. That's why the wide drop deck is engineered without pinch points, ensuring your peace of mind as you focus on the job at hand. Work confidently knowing your safety is Traxion's priority. Measuring 40 in. in length, these creepers are designed to accommodate most individuals comfortably. Say goodbye to awkward positions and hello to full-body support courtesy of the entire mesh deck. With a weight capacity of 400 lbs., durability and reliability are built into every inch of this creeper. Whether you're a seasoned pro or a DIY enthusiast, rest assured mesh flex creepers can handle the task. Upgrade your workspace and elevate your performance! Key features: * Low-profile design provides users with additional working room while underneath a vehicle * Wide mesh deck adds extra comfort, airflow and stability when in-use * Huge 5 in. casters made of a hard plastic * Wide drop deck does not have any pinch points * Creeper deck measures 40 in. in length, making it suitable for most individuals to work comfortably and remain supported by the entire mesh deck * Weight capacity: 400 lbs.
Not Yet Reviewed
$159.99
$143.99
On Sale
Flexzilla portable air compressors are offered in a variety of sizes. They feature industrial-grade, oil-free pumps with Quiet Technology—so operating noise is no louder than a normal conversation. Order the tank capacity needed for your applications. Additional details: * Two quick-connect universal brass couplers * Pressure regulator and gauge * Tank pressure gauge * Manual tank drain * Elastomeric ergonomic grip * Direct drive pump * Low-rpm twin cylinder pump * Power cord – 6ft., 14/3, SJT, cETLus Listed * Front or top controls, depending on model * 8 in. over-sized wheels (larger models only)
( 2 )
$473.99
—
$571.99
$426.59
—
$514.79
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
