Availability
On Sale
Mr. Gasket low-loss fuel fittings provide maximum fuel flow with minimal restriction. These fittings are a thin wall design, with large internal diameters and easy gradual bends for maximum flow. They are made from corrosion-resistant brass to provide maximum durability, and include one fitting and one hose clamp.
( 8 )
$22.34
$12.29
On Sale
These Fragola Performance Systems Series 3000 low-profile race hose ends are manufactured from aerospace-quality aluminum and machined to mil spec tolerances. They feature a low-profile design and are available in 45 and 90 degree versions to fit a variety of hose sizes.
( 8 )
$14.99
—
$44.99
$13.49
—
$40.49
On Sale
Earl's uses aluminum alloys that meet or exceed minimum requirements for aerospace hose fittings in their Swivel-Seal hose ends. These components are precision-machined to exact tolerances for trouble-free performance. Some features include an unmatched bend design, allowing for the maximum fluid flow capacity, and aluminum retention pins, allowing for 360 degrees of adjustment after installation. The nipple-and-cutter design that Earl's uses has been aerospace-proven for more than 40 years.
( 167 )
$62.45
$34.35
On Sale
Quicksilver marine fuel lines are durable, low permeation hoses that are gray in color to help reduce potential for vapor lock on warm days and exposure to sunlight. They are EPA compliant, and produced by Mercury Marine to stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser sterndrive. Available in different diameters, select the fuel line preferred for your boat's engine.
Not Yet Reviewed
$311.99
—
$483.49
$280.79
—
$435.14
On Sale
Racing Automotive Group recommends using their push lock hose for petroleum-based hydraulic oils, water, glycol antifreeze solutions, engine lubricating oils, and air. The material features suitability for low-pressure cleaning and pneumatic systems, return lines, and low-pressure lines (not recommended for pressure surge or critical applications such as permanent piping in residential or commercial buildings.) Create hose assemblies easily with Performance hose fittings and the matching size of Racing Automotive Group push lock hose!
Not Yet Reviewed
$29.99
—
$89.99
$26.99
—
$80.99
On Sale
FUELAB port fittings are made from 6061 T-6 aluminum and available in an array of sizes to assist with most any plumbing project. They feature a low-profile hex, are anodized to MIL-A-8625 Type II Black, and the port end is tapered and radiused for reduced pressure drop. FUELAB port fittings include an O-ring.
Not Yet Reviewed
$11.00
—
$21.00
$9.90
—
$18.90
On Sale
Earl's Performance tube adapter fittings will simplify your plumbing project! They are manufactured from quality aluminum and feature a black, red, or blue anodized finish. Both male and female tubing adapters are available. These adapter fittings were originally designed to meet the needs of the racing industry but will work with any low-pressure application to adapt aluminum tubing to AN or NPT type fittings. Order the fitting type you need.
( 159 )
$23.81
$13.10
On Sale
Clearance
Earl's Speed-Seal hose ends are reusable and have a proven record of reliability throughout the racing industry. Because brake system hose ends are subject to wear and tear from extreme vibration, these forged hose ends have an 80 percent greater wall thickness than any other on the market. These Speed-Seal hose ends are available in stainless steel or aluminum, bent tube or low-profile, and adjustable or non-adjustable configurations. They're made for use with Speed-Flex smooth bore hoses.
( 35 )
$51.69
$33.60
On Sale
APR braided stainless steel brake line upgrades are a direct-fit replacement that improves your braking experience with the best lines on the market today. Forget the factory rubber hoses that expand and can even rupture over time. These braided 304 stainless steel lines with a smooth-bore PTFE core allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel, as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, APR brake lines are application-specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive PVC outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft at 1,000 psi and 0.11 cc/ft at 2,900 psi. They're compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. Order the lines recommended for the front and/or rear of your vehicle.
Not Yet Reviewed
$139.95
—
$209.95
$76.95
—
$115.95
On Sale
Earl's Performance UltraPro hoses go way beyond "good enough." Why would you plumb your high performance, high-powered vehicle with traditional rubber hose, even if it's steel braided? Earl's UltraPro Series of stainless steel and polyester braided hoses are designed to withstand today's modern fluids, harsh environments, brutal vibration, flow requirements, and extreme pressures. You no longer need worry about frequent replacement, deterioration from fuels, and the safety hazards of vapors and leaks. And, UltraPro hoses are much lighter, more rugged, more flexible, and offer more flow. All of this, plus great looks, peace of mind, and a price that's hard to argue with—why wouldn't you choose Earl's UltraPro hoses for performance plumbing? Features of superior Earl's UltraPro hoses: * PTFE inner liner impervious to all known fuels, oils, and coolants used in automotive applications, is carbon-infused for static dissipation, and has ultra-low coefficient of friction to promote maximum flow * Double-helix ribbed inner hose liner offers extreme flexibility and full-flow, making tough plumbing jobs a snap with fewer hard connections * Liner is reinforced with an outside glass-fiber wrap for additional strength and integrity * Polyester braid hoses are up to 67 percent lighter, and the stainless steel braid hoses are up to 37 percent lighter than traditional rubber hose with stainless steel braid * Available in popular -6, -8, -10, -12, -16, and -20 AN sizes * Available in specific lengths and bulk to meet your application needs
Not Yet Reviewed
$319.95
—
$649.95
$175.95
—
$357.95
On Sale
Holley power steering hard lines offer a clearance solution. The pressure hose connection on the Type II power steering pump is really close to the pulley making it difficult to attach the hose. Holley power steering hard lines move the connection behind and below the pump for clearance and improved appearance. The special banjo bolt and crush washers provide additional clearance. Holley also includes a mounting bracket that makes the hardline stronger and less likely to crack from vibration or abuse. The kits are made from strong steel and zinc plated.
( 3 )
$127.95
$70.95
On Sale
Shafer's Classic Reproductions offers power steering hoses for a variety of applications from the 1950s and '60s. These replacements feature rubber hoses and steel ends tailored for a precise fit. They're available individually or in sets.
( 4 )
$29.99
—
$144.99
$26.99
—
$130.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
