Availability
On Sale
Holley offers Fox Body fuel system kits for a variety of applications, including many Ford Mustang models from the 1980s and '90s. These upgrades are designed as direct replacements for your factory fuel system—and include everything required: in-tank fuel pump module, billet fuel filters, fuel pressure regulator and gauge, fuel line, fittings, hardware, EFI-rated clamps, and all-new wiring components. They're designed to use factory fuel line routing and mounting locations for a clean, OEM-like installation. Additional details: * Choose from either a 90 or 139 GPH flowrate pump * Prepares your 1986-93 Ford Fox Body Mustang with a bulletproof fuel system for any engine application * Pump gas and E85 compatible fuel system * Includes 40 ft. of -6 AN or -8 AN nylon braided hose, enough to go from the tank to the engine for both feed and return * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage for improved reliability and consistent performance
Not Yet Reviewed
$1,049.95
—
$1,399.95
$943.95
—
$1,258.95
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
—
$849.95
$673.95
—
$763.95
On Sale
APR braided stainless steel brake line upgrades are a direct-fit replacement that improves your braking experience with the best lines on the market today. Forget the factory rubber hoses that expand and can even rupture over time. These braided 304 stainless steel lines with a smooth-bore PTFE core allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel, as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, APR brake lines are application-specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive PVC outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft at 1,000 psi and 0.11 cc/ft at 2,900 psi. They're compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. Order the lines recommended for the front and/or rear of your vehicle.
Not Yet Reviewed
$139.95
—
$209.95
$76.95
—
$188.95
On Sale
Summit Racing™ billet fuel vapor purge solenoid plugs provide a simple and easy way to replace the factory solenoid in a legally acceptable engine swap application. The plugs block off the EVAP port and install in seconds. We include the plug, bolt, and O-ring.
( 2 )
$23.99
$17.99
On Sale
Don't wait for your brake hoses to fail--replace your worn-out hoses with Scott Drake. These Scott Drake original-style brake hoses feature factory specification fittings, ensuring a great fit.
( 6 )
$26.50
$14.58
On Sale
Stillen is proud to offer an active brake cooling option for R35 GT-R owners looking to improve track times and lower brake temperatures. These rear brake cooling kits are for use with both traditional iron rotors, as well as the Stillen carbon ceramic matrix brake kit. During the development of the Stillen GT R Targa rally car, Team StiIlen worked very closely with the engineers at AP Racing to develop the first aftermarket carbon ceramic brake kit in the world. One of the key components of that kit was brake cooling. Carbon ceramic brakes have an ideal operating temperature range where they perform at their best. They work well when cold, but their true performance shines through during repeated hard, high-temperature braking. However, there is a temperature threshold which should not be exceeded. During the development of the kit the engineers at AP Racing asked what we would be doing for brake cooling. We were open to all input from AP, and their instructions were to use external fans directing air to the rotors and calipers. They said regardless of how hot the air is coming off the engine, it's a lot cooler than the heat coming off the rotors. To test the performance of its Active Brake Cooling Kit, Stillen went to El Toro Air Force Base with temperature sensors on each rotor and caliper. They ran the tests with the active cooling on one side of the car, and not the other. They performed a series of 140-0 runs as well as laps around the test track. They also put temperature sensor stickers on each caliper that act just like temperature paint for the rotor. As the temperature of the caliper increases, it burns off parts of the sticker—so it was known how hot the caliper is running. After all of the data was collected and analyzed, engineers determined that this brake cooling kit successfully reduced rotor temperatures by over 200 degrees. The front brake cooling kit consists of a weather-resistant electric fan, mounting brackets, wiring kit and switch, and polyurethane air diversion splitter. The rear brake cooling kit consists of polyurethane air scoops which take advantage of the factory NACA ducts in the belly pan, accordion tube, polyurethane air funnel and mounting bracketry. Stillen brake cooling kits are offered as separate front and rear kits. During testing, Stillen also found that with the VDC off, the rear brake cooling isn't 100 percent necessary. Because brakes work better with a bit of heat in them, Stillen prefers to leave the brake cooling kit off of the car when Steve Millen drives because he does not utilize the VDC control system. If you are like 99 percent of GT-R owners, you more than likely utilize the VDC function—and therefore the rear brake cooling system is recommended. While developed to aid in the necessary cooling for the carbon ceramic brake setup, these kits are also extremely effective in lowering caliper/rotor temperatures for both stock iron rotor setups, as well as the AP Racing iron rotor upgrades. Rear kits include: Polyurethane air scoops, accordion tube, air funnel and mounting bracketry.
Not Yet Reviewed
$230.87
$184.70
On Sale
The Summit Racing™ Flex Fuel Sensor Bypass lets you use a factory-type flex fuel sensor in a high-volume, high-flow fuel system with lines up to -10 AN. The bypass allows a portion of the fuel to run through the sensor to measure the ethanol content for your ECM--and then allows the rest to flow around or parallel to the sensor to avoid a restriction in the feed line. Made from billet aluminum and hard anodized black, the bypass kits come with -6, -8,and -10 AN adapter fittings and also include methanol-resistant O-rings.
( 1 )
$139.99
$109.99
On Sale
Earl's Performance Speed-Flex brake lines are factory-assembled brake lines made from the same Speed-Flex stainless steel braid-protected hose of extruded PTFE that is the worldwide standard of the racing industry for flexible brake, clutch, and instrument hoses. They're assembled with Earl's Speed-Flex crimp or swaged permanently-installed hose ends. Speed-Flex brake lines provide a firmer brake pedal, improved brake pedal feel, and better brake modulation. Each hose is pressure tested to 4,000 psi.
( 105 )
$37.43
$20.59
On Sale
NOS stainless steel braided hoses are PTFE-lined and factory-assembled to provide safe, secure plumbing for your nitrous and fuel line needs. The hoses are available in a variety of lengths, diameters, end fitting sizes and thread attachment styles. Hose ends are offered with a red, blue, or black anodized finish.
( 22 )
$127.95
$70.95
On Sale
Stifflers Suspension stainless steel brake hose kits firm up your pedal, improve your braking, and look good doing it! Even under normal driving conditions, rubber brake hoses expand, resulting in spongy, slow, and inconsistent braking. Stifflers braided stainless steel hose kits eliminate those problems and provide firm and responsive braking for all of your daily and performance driving needs. They are available as front, rear, or front and rear kits for factory and aftermarket calipers; including Aerospace, Wilwood, and Strange. Features include: * Aircraft-grade PTFE-lined stainless steel braided hose * PVC covering on hose protects it and surrounding components from wear * More responsive and consistent braking in all driving conditions * New mounting hardware, banjo bolts, and washers included where applicable * DOT compliant; meets FMVSS-106 * Offered in a choice of colors
( 1 )
$78.00
—
$248.00
$70.20
—
$223.20
On Sale
Improve your shifting with Stifflers Suspension stainless steel clutch hoses. Unlike the factory plastic line which expands under pressure and can even fail from exhaust system heat, Stifflers racing-grade stainless braided line eliminates expansion, improves shifts and holds up to the heat. Their unique one-piece design requires no adapters, and the attached fittings crimped directly to the braided line. Each fitting features dual O-rings to ensure against leaks. Don't be left shiftless with a failed factory line; upgrade to Stifflers stainless steel clutch hoses. Features and benefits include: * Direct replacement for factory plastic line * Improves shifting and pedal feel * No adapters required * Dual O-rings per side to ensure leak-free use * Increased heat resistance * PVC covering on hose protects it and surrounding components from wear * Aircraft-grade PTFE stainless steel braided hose
Not Yet Reviewed
$79.95
$71.96
On Sale
Clearance
K&N charge pipes are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes are engineered to reduce turbo charged air pressure loss, as well as dramatically increase air flow from the turbo through the intercooler. Constructed from lightweight aluminum with a durable gunmetal gray powder coated finish, the charge pipes are easy to install with commonly available tools and they are backed by K&N's 10-year/million-mile limited warranty.
( 2 )
$367.99
$317.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
