Availability
Showing In Stock Items. Show All 21 Items.
On Sale
Holley offers Fox Body fuel system kits for a variety of applications, including many Ford Mustang models from the 1980s and '90s. These upgrades are designed as direct replacements for your factory fuel system—and include everything required: in-tank fuel pump module, billet fuel filters, fuel pressure regulator and gauge, fuel line, fittings, hardware, EFI-rated clamps, and all-new wiring components. They're designed to use factory fuel line routing and mounting locations for a clean, OEM-like installation. Additional details: * Choose from either a 90 or 139 GPH flowrate pump * Prepares your 1986-93 Ford Fox Body Mustang with a bulletproof fuel system for any engine application * Pump gas and E85 compatible fuel system * Includes 40 ft. of -6 AN or -8 AN nylon braided hose, enough to go from the tank to the engine for both feed and return * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage for improved reliability and consistent performance
Not Yet Reviewed
$1,049.95
$943.95
On Sale
Holley G-body fuel system kits remove the guesswork when updating your G-body's system. Designed as a direct replacement for your factory fuel system, these kits contain everything required to go from fuel tank to engine bay. They are engineered for use with factory fuel line routing and mounting locations, creating a clean, OEM-like installation. Prepare your G-body with a bullet-proof fuel system for any EFI conversion with Holley fuel system kits. Features: * Pump gas and E85 compatible fuel system plumbing kit * 40 ft. of 6 AN nylon braided hose, enough to go from the tank to the fuel rails for both feed and return * Utilizes as many of the original sheet metal and chassis fuel system routing provisions with minimal to no drilling required * Electric fuel pump harness and relay wiring kit ensures the fuel pump receives the proper amperage, for improved reliability and consistent performance * Pre-calibrated fuel level sending unit works with factory fuel gauge for a simplistic installation—no guesswork about ohm range * Highly detailed installation instructions to guide you, step by step, along the installation process Kits include: * 350 lph EFI fuel pump module * Billet fuel filter * Fuel pressure regulator * Fuel pressure gauge * Nylon braided hose * AN fittings * Hardware * EFI-rated clamps * Fuel level sender * Fuel pump harness and relay wiring kit
( 2 )
$749.95
—
$849.95
$673.95
—
$763.95
On Sale
Fleece Performance offers fuel injector return line repair fittings for a variety of applications. For instance, the plastic factory injector return fitting on the 2011-and-up 6.7L Powerstroke engines is susceptible to breakage from heat, vibration, rough handling, and frequent disconnections for fuel filter maintenance. Upgrade this fitting and eliminate the risk of a broken fuel line with Fleece's heavy-duty billet aluminum injector return fitting. Featuring a dual O-ring internal design and serviceable barb fitting, these injector return fittings will ensure you're not left stranded with a broken, non-repairable fuel line. Additional details: * Heavy-duty, machined billet aluminum housing * Dual O-ring internal design for increased sealing * Serviceable billet aluminum barb fitting * Easy to install and remove * Sold individually or in a set of 5 * Application notes: Kits are designed to work with both OEM and aftermarket underhood fuel filter assemblies
( 2 )
$64.99
—
$349.95
$55.24
—
$297.46
On Sale
Here's the problem: On the L5P Duramax, because of the direct placement of the MAP sensor into the intake air stream from the factory, soot buildup becomes an ongoing maintenance problem. This requires the sensor to be routinely cleaned or replaced. The solution is Fleece Performance MAP sensor spacer kits. Fleece's spacer moves the sensor from the direct intake air stream to reduce soot buildup over time and eliminates the need to routinely clean or replace the sensor. The spacer block also integrates a 1/8 in. NPT port to allow for installation of an auxiliary boost pressure sensor. Fleece Performance kits include mounting block, fastener, seal ring, and O-ring port plug.
Not Yet Reviewed
$68.99
$58.64
On Sale
Fleece Performance quick-connect fittings allow you to install AN style fuel lines to the factory quick-connect fuel lines. They are constructed out of aluminum and are black anodized for durability and corrosion-resistance. Fleece Performance quick-connect fittings feature a short hex height to maximize installation clearance.
Not Yet Reviewed
$14.99
—
$17.99
$12.74
—
$15.29
On Sale
Fleece Performance turbo drain flange adapters are precision-machined from 6061 aluminum and finished with black anodize. A component of their drain tube kits, Fleece offers these same pieces individually to keep the connection between your turbo and the factory drain location on your block leak-free. Order the adapter recommended for your turbocharger make and model.
Not Yet Reviewed
$12.95
—
$34.99
$11.01
—
$29.74
On Sale
APR braided stainless steel brake line upgrades are a direct-fit replacement that improves your braking experience with the best lines on the market today. Forget the factory rubber hoses that expand and can even rupture over time. These braided 304 stainless steel lines with a smooth-bore PTFE core allow for very little expansion. This gives you a firmer brake pedal with less required pedal travel, as the fluid gets to its destination faster without all the flex and expansion that happens with lower quality lines. Unlike many universal lines on the market that often use connector adapters, APR brake lines are application-specific with the correct length and hose fittings, eliminating potential leak points. The lines have an attractive PVC outer jacket in smoked clear so you can see the braided lines from within, with red anodized inserts, and Cr3+ steel connectors. Each brake line is fully tested to 3,000 psi prior to sale, which is far beyond typical operating pressures. The lines are independently certified as SAE "low-expansion" lines and average only 0.07 cc/ft at 1,000 psi and 0.11 cc/ft at 2,900 psi. They're compatible with DOT 3, 4, 5 (silicone-based), and 5.1 brake fluids, are fully DOT-compliant, and meet FMVSS106 and SAE J1401 standards. Order the lines recommended for the front and/or rear of your vehicle.
Not Yet Reviewed
$139.95
—
$209.95
$76.95
—
$188.95
On Sale
Summit Racing™ billet fuel vapor purge solenoid plugs provide a simple and easy way to replace the factory solenoid in a legally acceptable engine swap application. The plugs block off the EVAP port and install in seconds. We include the plug, bolt, and O-ring.
( 2 )
$23.99
$17.99
On Sale
Don't wait for your brake hoses to fail--replace your worn-out hoses with Scott Drake. These Scott Drake original-style brake hoses feature factory specification fittings, ensuring a great fit.
( 6 )
$26.50
$14.58
On Sale
Stillen is proud to offer an active brake cooling option for R35 GT-R owners looking to improve track times and lower brake temperatures. These rear brake cooling kits are for use with both traditional iron rotors, as well as the Stillen carbon ceramic matrix brake kit. During the development of the Stillen GT R Targa rally car, Team StiIlen worked very closely with the engineers at AP Racing to develop the first aftermarket carbon ceramic brake kit in the world. One of the key components of that kit was brake cooling. Carbon ceramic brakes have an ideal operating temperature range where they perform at their best. They work well when cold, but their true performance shines through during repeated hard, high-temperature braking. However, there is a temperature threshold which should not be exceeded. During the development of the kit the engineers at AP Racing asked what we would be doing for brake cooling. We were open to all input from AP, and their instructions were to use external fans directing air to the rotors and calipers. They said regardless of how hot the air is coming off the engine, it's a lot cooler than the heat coming off the rotors. To test the performance of its Active Brake Cooling Kit, Stillen went to El Toro Air Force Base with temperature sensors on each rotor and caliper. They ran the tests with the active cooling on one side of the car, and not the other. They performed a series of 140-0 runs as well as laps around the test track. They also put temperature sensor stickers on each caliper that act just like temperature paint for the rotor. As the temperature of the caliper increases, it burns off parts of the sticker—so it was known how hot the caliper is running. After all of the data was collected and analyzed, engineers determined that this brake cooling kit successfully reduced rotor temperatures by over 200 degrees. The front brake cooling kit consists of a weather-resistant electric fan, mounting brackets, wiring kit and switch, and polyurethane air diversion splitter. The rear brake cooling kit consists of polyurethane air scoops which take advantage of the factory NACA ducts in the belly pan, accordion tube, polyurethane air funnel and mounting bracketry. Stillen brake cooling kits are offered as separate front and rear kits. During testing, Stillen also found that with the VDC off, the rear brake cooling isn't 100 percent necessary. Because brakes work better with a bit of heat in them, Stillen prefers to leave the brake cooling kit off of the car when Steve Millen drives because he does not utilize the VDC control system. If you are like 99 percent of GT-R owners, you more than likely utilize the VDC function—and therefore the rear brake cooling system is recommended. While developed to aid in the necessary cooling for the carbon ceramic brake setup, these kits are also extremely effective in lowering caliper/rotor temperatures for both stock iron rotor setups, as well as the AP Racing iron rotor upgrades. Rear kits include: Polyurethane air scoops, accordion tube, air funnel and mounting bracketry.
Not Yet Reviewed
$230.87
$184.70
On Sale
Fleece Performance offers dual pump hardware kits for a variety of diesel trucks. Kits include all the components you need to begin the build of a custom Dual CP3 Fuel System on your 5.9L or 6.7L Cummins engine application. A Dual CP3 system adds an additional CP3 in conjunction with your factory pump so you can make the most of your aftermarket tuning, injectors, and other upgrades. Combine one of these Fleece hardware kits with a CP3 pump, spoked or solid pulley, Fleece fuel distribution block, and a hose and fitting kit to complete your fuel system (other components sold separately). Kit contents: * Cummins common rail Dual CP3 bracket * Cummins heavy-duty dual pump belt * Fan shroud bracket * Dual pump pulley – idler * Cummins dual pump idler pulley spacer * Cummins dual pump controller * High-pressure dual pump line (CP3 to CP3) * High-pressure CP3 fitting and non-return valve * (6) M8 x 1.25 flange nuts * (6) M8 x 1.25 × 50 carriage bolts * M10 x 1.5 x 40mm flange head cap screw * M8 × 1.25 flange head cap screw * M18 x 1.5 CP3 nut Features: * Easy install kit * Exclusive pump to pump line * Increased engine performance
( 1 )
$780.00
$663.00
On Sale
The Summit Racing™ Flex Fuel Sensor Bypass lets you use a factory-type flex fuel sensor in a high-volume, high-flow fuel system with lines up to -10 AN. The bypass allows a portion of the fuel to run through the sensor to measure the ethanol content for your ECM--and then allows the rest to flow around or parallel to the sensor to avoid a restriction in the feed line. Made from billet aluminum and hard anodized black, the bypass kits come with -6, -8,and -10 AN adapter fittings and also include methanol-resistant O-rings.
( 1 )
$139.99
$109.99
On Sale
Earl's Performance Speed-Flex brake lines are factory-assembled brake lines made from the same Speed-Flex stainless steel braid-protected hose of extruded PTFE that is the worldwide standard of the racing industry for flexible brake, clutch, and instrument hoses. They're assembled with Earl's Speed-Flex crimp or swaged permanently-installed hose ends. Speed-Flex brake lines provide a firmer brake pedal, improved brake pedal feel, and better brake modulation. Each hose is pressure tested to 4,000 psi.
( 105 )
$37.43
$20.59
On Sale
Eliminate the installation headaches associated with non-flexible OE drain lines with Fleece Performance silicone turbo drain tube kits. Each kit features a larger inner diameter, smooth silicone hose for longevity and durability, and black anodized billet aluminum flange with integral O-ring for leak-free performance. Fleece's patent pending drain hose simplifies turbocharger installation and will ensure proper oil drainage from your turbocharger. Kits include new fasteners and are designed for use with all Cummins equipped Dodge Ram factory-style turbochargers, VGT or HX35 and HY35-style turbochargers, as well as aftermarket drop-in replacements, like Fleece's Cheetah Series. Choose the turbo drain line kit designed for your Cummins.
( 3 )
$94.99
—
$99.99
$80.74
—
$84.99
On Sale
NOS stainless steel braided hoses are PTFE-lined and factory-assembled to provide safe, secure plumbing for your nitrous and fuel line needs. The hoses are available in a variety of lengths, diameters, end fitting sizes and thread attachment styles. Hose ends are offered with a red, blue, or black anodized finish.
( 22 )
$127.95
$70.95
On Sale
Fleece Performance fuel supply tube nuts ensure a proper seal on your injector tubes and high-pressure injection lines. These high-tolerance tube nuts are produced from 300 Series stainless steel for a precision seal and lasting durability. Fleece tube nut sets are etched with their logo.
Not Yet Reviewed
$89.99
$76.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
