Availability
Showing In Stock Items. Show All 88 Items.
On Sale
Holley offers air conditioner compressor manifolds in a variety of styles and finishes. These replacement line adapters are machined from aluminum or copper and will facilitate your A/C compressor hookup. Mounting hardware is included. Applications include vehicles with a GM LS engine.
( 8 )
$24.14
—
$42.44
$21.73
—
$23.34
On Sale
Scott Drake oil pressure sending extensions are offered in a choice of sizes and finishes. These hex shaped extensions are made from machined metal and are crafted for durability and quality.
( 53 )
$35.65
—
$40.41
$32.09
—
$36.37
On Sale
Holley MAP sensor port plugs are milled from billet aluminum for strength, powdercoated for corrosion resistance, and include an O-ring for a tight seal. They're designed to eliminate LS3-style MAP sensors and work with most intake manifolds.
( 5 )
$36.14
$32.53
On Sale
Scott Drake upper control arm grease fitting kits can help to quiet front end noises and ensure that all threads on the shaft remain lubed. The 90 degree grease fittings are designed for easier installation, as they don't run into the shock tower. These zerk fittings help extend the life of your control arms, since they can now be greased easily. They're available as a set of fittings or in a kit with extensions and installation tool included. Eliminate squeaky upper control arms with help from Scott Drake grease fittings.
( 12 )
$23.75
$21.38
On Sale
Holley manifold plug and fitting kits allow two different styles of connections within one unit. They are offered to service your mid-mount accessory drive LT/LS, BBC, and SBC cooling manifolds. These genuine Holley fittings are constructed from aluminum and feature a chrome finish for longevity.
( 2 )
$43.69
$39.32
On Sale
Holley has fittings to adapt different sized fuel lines to bare Holley fuel bowls, as well as hose and banjo fittings for special applications.
( 106 )
$49.95
$44.95
On Sale
These Holley fuel bowl fittings are an exact fit to ensure a perfect seal. An O-ring is included, so you won't have a fuel leak again.
( 38 )
$38.13
$34.32
On Sale
Mishimoto offers special adapters that enable you to place a water temperature sensor directly in the path of the water to the radiator, ensuring the most accurate reading possible. These coupler fittings are manufactured from high-quality aluminum with a black, gold, or silver anodized finish. They include a 1/8 in. NPT gauge port and are available in a variety of hose barb sizes and worm-style clamps for easy attachment.
( 28 )
$32.95
$29.66
On Sale
The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance vehicles. Replace the rigid hard lines with Earl's Performance LS steam vent adapters. These adjustable outlets are O-ring seal adapters designed to convert to -3 or -4 AN plumbing. Earl's steam tube adapters are the most adjustable and lowest profile available. These adapters look as nice as they are installation-friendly. There are several kits available to allow for the optimal routing on your application, including dual outlet options, which eliminate the need for a Tee adapter.
( 18 )
$76.35
—
$82.45
$41.99
—
$45.35
On Sale
Adding ancillary ports to your intercooler or engine cooling system can be a challenge, especially if you don't have access to metal fabrication equipment. Recognizing the need for an easy-to-install 1/8 in. NPT adapter bung for rubber or silicone couplers, Mishimoto CNC-machined their add-on bungs from 6061 aluminum with space for a durable silicone O-ring to ensure a leak-free seal with both air and liquid passageways. They feature a durable black anodized finish, ensuring optimal resistance against corrosion, and can be installed in minutes to accept any 1/8 in. NPT accessory, such as injection nozzles, sending units, and sensors. You can add ancillary ports with professional results, thanks to Mishimoto add-on bungs.
Not Yet Reviewed
$24.95
$22.46
On Sale
Mishimoto AN to hose barb adapter fittings are designed to get your hose connected when converting from AN sizes. These fittings are machined from durable aluminum and available in different sizes to fit your specific size hose. Get connected and get cooled with help from Mishimoto!
Not Yet Reviewed
$27.95
—
$53.95
$25.16
—
$48.56
On Sale
Holley weld-on fill cap kits include a cap CNC-machined from 6061-T6 billet aluminum with a bright, black anodized finish for great looks and corrosion protection. They're available with aluminum or steel weld bungs to match your application. Holley weld-on fill cap kit features include: * Allows for installation of a fill cap or inspection plug anywhere needed * Caps feature a laser-etched "Holley Equipped" logo * Easy-to-grip screw-on cap with O-ring seal and a 1.38 in. diameter opening * 1.950 in. O.D. / 1.400 in. I.D. weld bung * 1.810 in. diameter at the step of weld bung * 0.675 in. weld bung overall height * 0.570 in. height at the step of weld bung * 1 1/2-12 in. thread
( 3 )
$56.19
$30.90
On Sale
Fleece Performance Y-barbed fittings can assist you with splitting a feed line, combining two separate fuel sources, and more. They are crafted from anodized billet aluminum and offered in two sizes for use with pushlock hose. Choose the size needed for your plumbing project.
Not Yet Reviewed
$23.99
$20.39
On Sale
Mr. Gasket fuel pressure gauge adapters offer an easy way to add a fuel pressure gauge in soft fuel lines. Made from gold anodized aluminum, the adapters have 3/8 in. hose ends and a center-tapped 1/8 in. NPT port. Mr. Gasket fuel pressure gauge adapters include two hose clamps for a quick and easy installation.
( 5 )
$22.66
$20.39
On Sale
When replacing your brake lines, or plumbing a new brake system, use Fragola Performance Systems brake adapters to complete the job properly. These brake adapters are manufactured from high-quality steel machined to mil spec tolerances and zinc coated for durable, tight connections. No matter what the job--connecting PTFE-lined hose to calipers, wheel cylinders, or hard lines, or just replacing leaky banjo bolts--Fragola brake adapters offer easy, secure installation, even where space is tight. Plumb with the best--Fragola Performance Systems.
( 109 )
$22.99
$20.69
On Sale
Trail-Gear axle housing inspection hole kits allow quick access for inspecting the ring gear. Extra-large in size, the threaded aluminum cap utilizes a rubber O-ring for a tight seal—and is engraved with the Trail-Gear Rock Assault logo. The do-it-yourself install requires cutting a hole in to the top of your differential housing and welding on the included threaded bung.
( 1 )
$51.99
$44.19
On Sale
Earl's uses aluminum alloys that meet or exceed minimum requirements for aerospace hose fittings in their Swivel-Seal hose ends. These components are precision-machined to exact tolerances for trouble-free performance. Some features include an unmatched bend design, allowing for the maximum fluid flow capacity, and aluminum retention pins, allowing for 360 degrees of adjustment after installation. The nipple-and-cutter design that Earl's uses has been aerospace-proven for more than 40 years.
( 167 )
$33.60
—
$62.45
$20.59
—
$34.35
On Sale
When you're plumbing brake lines, gauges, power steering, or air conditioning with durable PTFE stainless braided hose from Fragola, you need hose ends that will do the job just as well. These reusable hose ends feature a miniature "olive" that retains the hose inside of the fitting. By replacing the olive, Fragola Performance Systems PTFE hose ends can be used over and over again. PTFE hose ends are available in zinc coated steel and anodized aluminum in a surplus of sizes, styles, and angles to fit just about any application. Plumb with the best--Fragola Performance Systems PTFE hose ends.
( 21 )
$28.99
—
$56.99
$26.09
—
$51.29
On Sale
Earl's Performance offers a complete line of power steering adapter fittings to accommodate a variety of thread sizes to plumb your pump. Earl's offers the most complete line of adapter fittings in the industry.
( 24 )
$53.29
$29.31
On Sale
Mishimoto swivel hose ends add extra flair to your build. Crafted from aluminum with a fresh-looking clear and black anodized finish, these fittings are available in a variety of styles, angles, and sizes for easy installation on different hoses. Mishimoto swivel hose ends are perfectly suited for custom oil coolers, transmission coolers, catch cans, and much more.
( 1 )
$22.95
—
$29.95
$20.66
—
$26.96
On Sale
Gotta' love putting Dana axles under just about anything, but the added wheel cylinder volume of the larger axles means a properly matched master cylinder is a must. If you are considering a Dana axle swap for your pickup, Low Range Off-Road master cylinder to booster adapters will be needed to fit a GM 1-ton master cylinder to your brake booster. These adapter kits were designed for Dana 60s, but pair well with Dana 44 axle swaps. Each kit includes an adapter, hardware, and pushrod. Note: Adapter is intended for use with GM master cylinders found commonly on 1986 1-ton GM trucks.
Not Yet Reviewed
$47.09
$40.03
On Sale
Get connected with Mishimoto AN to metric adapter fittings. They are manufactured from durable aluminum and feature a black anodized finish for maximum protection.
Not Yet Reviewed
$43.95
$39.56
On Sale
Whether you need bulkheads, tees, unions, reducers, swivels, couplers, or elbows to complete your plumbing job, look no further than Fragola for the finest fittings and adapters. To the people at Fragola, engineering has great value, and perfecting their hose ends and fittings is serious business. Fragola Performance Systems coupler adapter fittings are manufactured from aerospace-quality aluminum to exacting standards for tight, leak-free connections and then anodized for added durability. These American-made coupler adapter fittings are available in varying sizes to fit nearly any application. Plumb with precision fittings from Fragola Performance Systems.
( 74 )
$22.99
—
$23.99
$20.69
—
$21.59
On Sale
Whether you need bulkheads, tees, unions, reducers, swivels, couplers, or elbows to complete your plumbing job, look no further than Fragola for the finest fittings and adapters available. To the people at Fragola, engineering is the key, and perfecting their hose ends and fittings is serious business. Fragola Performance Systems tee adapter fittings are manufactured from anodized aluminum or zinc finished steel to exacting standards for tight, leak-free connections. These tee adapter fittings are available in varying sizes to fit nearly any application, and most are produced right here in the USA. Plumb your racer like a pro with Fragola tee adapter fittings.
( 34 )
$23.99
—
$36.99
$21.59
—
$33.29
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
