Availability
Showing In Stock Items. Show All 81 Items.
On Sale
MBRP's PLM Series exhaust systems feature a muffler delete pipe that takes the place of your muffler, providing the ultimate in exhaust flow and sound. By doing so, they increase both horsepower and torque and improve fuel economy. The systems are manufactured from heavy-duty steel pipe with an aluminized coating for maximum protection. Their specially designed 2-piece tailpipe and bolt-on hangers allow for a simple, straightforward installation. These PLM Series exhausts are available in a variety of sizes, styles, and configurations for fitment on specific vehicle applications.
( 34 )
$459.99
—
$529.99
$399.99
—
$489.99
On Sale
MBRP Performance Series exhaust systems maximize exhaust flow and minimize exhaust temperatures. They're manufactured from 100 percent aluminized steel and come standard with MBRP's smaller muffler. Fully sealed tubing adds years to your system, avoiding rust-through on seams. Performance Series units are road, track, and dyno-tested; and they're specially tuned to deliver an aggressive exhaust note. Order the model designed for your specific vehicle. Other features and benefits: * Fully mandrel-bent tubing and minimal bend degree angles increase airflow * Better gas mileage * Bolt-on, no-weld design for easy installation * Direct-fit to the OEM hangers; clamps and accessories included * Available for gas truck and diesel applications * Limited one-year workmanship warranty
( 45 )
$344.99
—
$554.99
$284.99
—
$519.99
On Sale
Doug's Headers side tubes complete your side exhaust with racy looks. Corvettes are known for being fast, and side pipes and tubes create a fast look that is natural and clean! Doug's 4 in. side tubes bolt to existing holes in your Corvette rocker panel and clamp to either their big block or small block side exhaust headers for a leak-free seal. And, they're available in your choice of metallic ceramic, black, or chrome finishes. Side pipes belong on Corvettes; finish the perfect look with Doug's Headers side tubes.
( 36 )
$498.10
—
$557.00
$448.29
—
$501.30
On Sale
The MBRP Installer Series exhaust systems give you the best of both worlds in one complete package. They provide great sound control—as well as improvements in torque and horsepower. These systems are constructed from heavy-duty, 16-gauge steel with an aluminized coating and an extra-thick layer of aluminum silica on the seams, an area often left exposed to rust. The units are available in hundreds of configurations to suit your vehicle's exhaust needs.
( 404 )
$269.99
—
$624.99
$229.99
—
$584.99
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 990 )
$434.95
—
$749.95
$274.95
—
$487.95
On Sale
Hooker Super Competition Block Hugger headers are a great choice for your custom car, truck, or rod. Ideal for applications where the frame rails are close to the engine block. These headers feature a tucked-in tube design that's perfect for those tight-fit installations! Mandrel-bent, tuned-length primaries decrease backpressure and increase exhaust velocity, improving horsepower, torque, and throttle response. Their collectors are positioned for maximum starter and engine mount clearance; and exit parallel with the oil pan rail to allow for maximum ground clearance. Hooker Super Competition Block Hugger headers come complete with the gaskets, header bolts and collector reducers needed for a successful installation.
( 27 )
$687.95
$378.95
On Sale
Doug's Headers has long been recognized of as one of the premiere exhaust header manufacturers in the performance industry. Since1958, they have been producing high-quality, hand-built, mandrel-bent exhaust headers. Each and every header is tuned with the proper tube size and length to efficiently remove all of the exhaust from each cylinder, reducing pumping losses, and resulting in dramatic increases in horsepower and torque. Doug's headers are carefully developed on the vehicles that they are intended to fit and are re-checked numerous times during the design and manufacturing process. Their designs include mid-length headers, Tri-Y headers, and long tube headers, plus manifold replacement headers. Their headers come with all the necessary mounting hardware, collector reducers or connector pipes, premium extra-thick gaskets, and detailed installation instruction sheets. The gaskets are rated up to 1100 degrees F, pressures to 3700 psig (255 bar), and are designed for an exact port match with their headers. Doug's Headers offer a choice of finishes: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 703 )
$425.45
—
$542.65
$382.90
—
$488.38
On Sale
Looking for the most aggressive sound in the Flowmaster muffler line? Then take a look at their 40 Series mufflers. Designed for use on street and strip vehicles, they take the sound waves produced in the exhaust, and cancel them against angled baffles built into the muffler case. This improves both horsepower and fuel economy. Best of all, they allow you to hear that cool Flowmaster tone inside of the vehicle, as well as outside. So, if you want more power and less noise, then you've got to get Flowmaster 40 Series mufflers.
( 356 )
$449.95
$337.95
On Sale
Patriot full-length chassis and fenderwell headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which results in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom-altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 263 )
$377.95
—
$561.95
$340.16
—
$505.76
On Sale
Patriot full length street rod headers provide the ultimate in performance for street rods and musclecars with high performance engines. The key is their use of long primary tubes, which result in more horsepower and torque than those from the competition. Other features include a close fit with the engine block for maximum chassis and steering clearance, mandrel-bent tubing that's available in your choice of bare or ceramic coated finishes, and new gaskets and bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available are: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers under hood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes being applied by our competitors. * Raw steel is available for individual customizing
( 17 )
$396.95
—
$462.05
$357.26
—
$415.84
On Sale
Hooker Super Competition cat-back exhaust systems aid in performance gains from modifications such as cams, intakes, throttle bodies, headers, etc. They use large-diameter, mandrel-bent, 16-gauge aluminized tubing for maximum efficiency, the lowest backpressure, and longer life. These systems are designed using flanged construction (where applicable), and use existing stock hangers for easy installation.
( 41 )
$649.95
$422.95
On Sale
Patriot Clippster headers feature longer primaries that exit toward the rear of the engine compartment to clear steering and suspension components. They have slightly shorter primaries than full length headers and provide ground clearance on lowered vehicles. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts, and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment. Finishes available: * Metallic Ceramic Thermal Barrier Coating (MCTBC), which is polished with a vibratory finishing process that not only produces a high-luster aluminum appearance, but also compresses and activates the coating, which increases the surface hardness. The finish is 60 percent more corrosion-resistant than an unpolished surface, easy to maintain, and will last for years under normal operation conditions. MCTBC also protects and extends the life of headers by creating a thermal barrier (heat-resistant up to 1,600 degrees F) that significantly lowers underhood temperatures and protects the substrate metal from thermal fatigue. * Hi-Temp black coating is an affordably priced alternative to their MCTBC. This finish provides good corrosion and heat protection when compared to many of the "cheaper" header finishes. * Raw steel is available for individual customizing
( 349 )
$371.95
—
$551.70
$334.76
—
$496.53
On Sale
Flowtech shorty headers are just the ticket for those who want the best of both worlds--top performance and a clean machine. They bolt on to your OEM exhaust system, offering real horsepower gains plus increased efficiency. These headers are made from durable 16-gauge tubing; feature TIG-welded, extra-thick 3/8 in. flanges for a leak-free seal, and come complete with premium gaskets and hardware. Plus, Flowtech Shorty headers are available in high heat-resistant black paint, ceramic thermal barrier coating or natural stainless finishes for improved rust and corrosion resistance. Additional features: * Designed as a direct fit replacement for OEM exhaust manifolds * High-flow, mandrel-bent tubes provide consistent tubing diameters for smooth flow and increased exhaust velocity Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Flowtech recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 86 )
$549.95
—
$827.95
$302.95
—
$538.95
On Sale
MBRP XP Series mufflers are constructed from quality 409 stainless steel with fully-welded bodies, and are built to stand up to salt, rocks, tar, grime, and whatever else the elements may throw at it. MBRP Performance offers the XP Series in different muffler configurations to give you extra power and torque, improve your fuel economy, and deliver a throaty, rumbling exhaust note. Don't let your stock exhaust drag you down—improve your ride's performance with MBRP XP Series mufflers! Order the model suited to fit your application needs.
( 4 )
$329.99
—
$364.99
$279.99
—
$314.99
On Sale
With Hooker Super Competition headers, the objective has always been to make the maximum horsepower possible and put it at the optimum point in the power curve. Hooker Super Competition headers feature tuned primary tubes to create optimum pressure between the intake and exhaust systems. Hooker Super Competition headers include premium exhaust gaskets and new mounting bolts. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 223 )
$749.95
—
$949.95
$412.95
—
$522.95
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 944 )
$384.95
—
$949.95
$250.95
—
$522.95
On Sale
Get incredible, aggressive muscle car sound with these Pype Bomb exhaust kits from Pypes! Constructed with unique, louvered-core resonated, dual-wall 304 or 409 stainless tips, these systems give your ride that deep, throaty rumble without the annoying popping or drone that's common in other kits. These kits are available for a choice of applications. For great quality, exceptional sound, and a great price, you can't beat Pypes Pype Bomb exhaust systems!
( 40 )
$439.79
$414.79
On Sale
Flowmaster FlowFX exhaust systems are a "sound" choice for your vehicle. Delivering a moderately aggressive tone, they're built with bright 409S stainless steel tubing, and FlowFX straight-through mufflers with large cores for maximum performance and a deep sound. Many systems also include 304 stainless steel tips finished in a black ceramic coat or polished, and embossed with the Flowmaster logo. Flowmaster FlowFX exhaust systems are designed for ease-of-installation, and include all necessary parts, hardware, and detailed instructions. Choose the style, pipe size, muffler quantity and configuration for best fitment on your vehicle.
( 161 )
$533.95
—
$799.95
$329.95
—
$519.95
On Sale
MBRP XP Series exhaust systems are designed to withstand the toughest conditions, on and off the road. Their rugged, thick, 16-gauge stainless steel tubing won't rust through. They feature solid, reinforced welds at vital stress points, making certain that your system stays securely mounted. The MBRP XP Series mufflers and pipes deliver a rich, mellow exhaust note and are finished off with a mirror-polished, stainless steel, rolled-edge exhaust tip. They're available in a wide variety of styles and configurations to fit your specific vehicle.
( 243 )
$324.99
—
$609.99
$284.99
—
$544.99
On Sale
Hooker Blackheart headers deliver premium performance with a reasonable price. Hooker utilizes stainless steel and mild steel for construction of these headers designed for optimum flow, maximum velocity, and ground clearance. Whether you're looking for shorty headers or long tube, Blackheart headers are available in a variety of styles and sizes to fit a wide selection of vehicles from luxury rides to sports cars, modern muscles, and even trail-blazing rigs. When it's time to tear the heart out of the competition, choose Blackheart from Hooker!
( 50 )
$649.95
—
$799.95
$422.95
—
$519.95
On Sale
Hooker Blackheart Gen III Hemi swap headers are one part of a fully engineered swap system that provides maximum component clearances, ideal drivetrain geometry and clearance for an aftermarket exhaust system. These high-quality long tube Tri-Y swap headers are made from 304 stainless steel and feature 3/8 in. thick flanges, 18-gauge with 1 7/8 in. primary tubes, and 3.00 in. collectors. These swap headers provide clearance to the brake booster, steering shaft, starter motor (both left and right side mounted starters), and provide clearance for several automatic and manual transmission options. This highly engineered swap system eliminates the installation guesswork, and compatibility uncertainty that is common with universal swap parts.
( 2 )
$579.95
—
$799.95
$376.95
—
$519.95
On Sale
MRBP SLM Series exhaust systems are the starting point to getting the most from cold air intakes, programmers, modules, and downloaders. They're constructed to the same specifications as MRBP's top-of-the-line Pro Series. Built from 16-gauge T409 stainless steel with a muffler delete pipe, SLM units are tuned for an aggressive sound and free-flowing performance. Order the model designed for your diesel application. Features and benefits: * More pulling power * Improved throttle response * Greater fuel efficiency * Mandrel-bent tubing; minimal bend degree angles * Gets hot exhaust out fast * Drops exhaust gas temperature by up to 200 degrees F * Direct-fit to OEM hangers * Bolt-on, no-weld installation * Clamps and installation accessories included * MBRP stamped logo on exhaust tip (if tip is included) * Limited 5-year workmanship warranty. (This series may, with time, develop surface rust which is not covered with this warranty.)
( 13 )
$374.99
—
$434.99
$324.99
—
$384.99
On Sale
Get the most from your exhaust with JBA Performance Exhaust X, H, and Y-pipes. These system upgrades equalize the exhaust flow to enhance performance from your JBA headers. Some configurations include a catalytic converter. Choose the style and size to blend with your exhaust setup. X, H, and Y-pipes are ideal for direct replacement, racing, or off-road applications.
( 18 )
$318.80
—
$398.40
$286.92
—
$358.56
On Sale
MBRP Performance offers Street Profile exhaust systems in a variety of styles (including cat-back and resonator-back), materials (including stainless steel and aluminized steel), finishes, exits (single/dual), mufflers, and more. Cruise the highway or hit the track—these exhausts are the perfect mix of aggressive sound when you're into the throttle without being obnoxious on long drives. And you can increase flow by up to 72 percent! Order the Street Profile system recommended for your vehicle. Additional notes: * Moderate sound level * Smooth mandrel-bent tubing * Helmholz Technology * Lower EGTs
( 1 )
$564.99
—
$599.99
$509.99
—
$524.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
