Availability
Showing In Stock Items. Show All 25 Items.
On Sale
BD Diesel turbocharger installation kits are available for setting up and servicing your turbo assembly. These gasket and seal kits are required for replacement of individual high-pressure and low-pressure turbochargers.
Not Yet Reviewed
$271.95
$244.76
On Sale
Flowtech headers are designed to provide optimum exhaust flow for increased horsepower, torque, fuel economy, and improved throttle response. Leak-tested for maximum performance, they feature the industry's best welds for durability and are carefully engineered for precise fit. Available for a wide range of applications, they're offered in block hugger, competition, fenderwell, lakester, long tube, mid-length, shorty, upright, and turbo styles. Varying with the application, Flowtech headers are constructed from sturdy and lightweight cold-rolled mild steel or stainless steel for increased strength and durability. All tubing is mandrel-bent to provide consistent tubing diameter for smooth flow and increased exhaust velocity. Extra-thick, machined header flanges provide a leak-free seal and maximum strength. For long-term rust and corrosion-resistance, available finishes include natural and polished stainless steel, high heat-resistant black paint, or a satin silver metallic ceramic thermal barrier coating. All mounting hardware and premium gaskets are included. Important notes: Breaking in an engine with ceramic coated headers WILL result in damage to the coating and will VOID all warranties. Ceramic coated headers require several heat cycles to fully cure before they will withstand extreme heat. Hooker recommends using cast iron exhaust manifolds or old headers to break in new engines to avoid coating damage. Flowtech does not recommend the use of header wraps as this will void the warranty.
( 991 )
$182.95
—
$449.95
$164.65
—
$261.85
On Sale
Hooker LS swap exhaust system intermediate pipes provide bolt-in compatibility with Hooker LS swap exhaust manifolds (2nd Gens only), headers, engine mounting brackets, and transmission crossmembers specifically designed for this vehicle application. They are manufactured from highly durable stainless steel and include the necessary mounting gaskets and hardware to complete the installation. The pipes will help to decrease your total swap installation effort and cost, while increasing the engineered quality of your vehicle.
( 17 )
$199.95
$179.95
On Sale
Hooker Competition headers are designed for stock or mildly modified engines for the value-conscious buyer. Made from durable 16-gauge steel, Competition headers feature 5/16 in. thick flanges that are heavy enough to maintain header integrity, yet pliable enough to seal each exhaust port. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 945 )
$384.95
$250.95
On Sale
Producing an aggressive muscle car sound, the Flowmaster 80 Series crossflow mufflers are specially designed for applications where the muffler must be mounted transversely behind the rear axle. Whether you need to match an OEM exhaust system or are looking for increased ground clearance, these mufflers fit the bill. They are available in your choice of single inlet/dual outlet or dual inlet/dual outlet configurations--order yours today!
( 29 )
$181.95
—
$249.95
$163.75
—
$224.95
On Sale
Let MBRP Black Series downpipes assist you with your quest for power! Every enthusiast is looking for more power, and during your search, you've possibly overlooked the restrictive factory downpipe on your rig. Mount MBRP downpipes between your factory turbo and exhaust system for a deeper sound, lower EGTs, and quicker throttle response. These Black Series pipes are crafted from 16-gauge, mandrel-bent steel for maximum flow; and they're coated with an extremely durable, high-temperature black ceramic finish for the hottest looks and performance in town. Your search is over—MBRP can make your desire for power a reality with their Black Series turbo downpipes.
( 16 )
$224.99
—
$314.99
$179.99
—
$251.99
On Sale
Optimize your diesel's performance with a non-restrictive aFe Atlas turbo downpipe. Engineered to outflow and outperform the restrictive OE down-pipe on your vehicle, they are designed with 3 in. mandrel-bent steel tubing offering smoother transition bends for low turbulence, increased airflow, and quicker turbo spool times. aFe Atlas turbo downpipes utilize factory mounting locations for true bolt-on performance and feature high-quality, OE-style V-band flanges for a complete 360-degree leak-free sealing surface. GM pipes are coated with a black finish and wrapped in high-temperature thermal header tape for better insulation, reducing EGTs and underhood temperatures.
Not Yet Reviewed
$168.00
—
$273.00
$151.20
—
$245.70
On Sale
MBRP XP Series downpipe kits offer lasting performance and looks. Manufactured from T409 stainless steel, they are built to withstand the harshest conditions, increase performance, and add a more aggressive sound to your off-road rig. All factory mounting points are retained and installation is pretty straightforward. Keep the flow smooth, even though the terrain is bumpy, with MBRP XP Series downpipe kits.
( 2 )
$204.99
—
$314.99
$163.99
—
$251.99
On Sale
Flowtech Afterburner headers have a patented velocity tube design, which will increase scavenging and smooth exhaust pulses. They also feature a primary collector formed from steel, and a large 3 in. secondary collector. They're available in standard painted or ceramic coated finishes. Unless otherwise noted, these headers are designed to fit the vehicle as it came from the manufacturer. This includes components like cylinder heads, chassis, steering, motor mounts, body mounts and bushings, etc. If your vehicle is using aftermarket components, parts from other applications, or custom altered parts, then it is the installer's responsibility to verify fitment.
( 7 )
$409.95
$225.95
On Sale
Go Fast Bits offers DV Plus Range with Direct-Fit Performance Diverters for a wide range of domestic and import vehicles. GFB's DV+ solution couldn't be simpler: keep what works and replace what doesn't. GFB expands the DV+ range with a direct-fit solution for the weak factory diverter valve used on many European vehicles. The solenoid coil itself from the factory-fitted valve is great—the ECU opens it faster than any pneumatic valve, so why replace it? The weak point, however, is the valve mechanism itself. GFB's DV+ solves this problem by replacing the valve parts with an anodized billet aluminum housing, fitted with a brass piston machined to exacting tolerances. The end result is sharper throttle response, lightning-fast valve actuation, and it will hold as much boost as you can throw at it. Other manufacturers' products involve replacing the entire system with a traditional pneumatic valve, or include a solenoid valve with the diverter. These approaches add unnecessary cost and additional parts (in some cases requiring long vacuum hose runs, mounting brackets, etc.). All these additional items result in a product that is slower, less responsive, more expensive, and takes longer to install. GFB's DV+ solution, on the other hand, is more responsive, less expensive, easier to install, and doesn't cause compressor surge/turbo flutter. Oh, and it doesn't require different springs or frequent re-builds, either. Order the model recommended for your vehicle.
( 1 )
$147.60
—
$166.50
$132.84
—
$149.85
On Sale
Hooker Blackheart exhaust manifolds are designed to be used with Hooker Blackheart engine mounts and transmission crossmembers for a trouble-free installation. They feature nickel plated steel mating flanges and include MLS mating flange gaskets and hardware. Blackheart exhaust manifolds are cast from high-silicone moly ductile iron to provide durability and corrosion resistance.
( 19 )
$338.95
—
$449.95
$186.95
—
$247.95
On Sale
Flowmaster introduces their Outlaw high clearance axle-back exhaust systems for select Ford Broncos with a 2.3 or 2.7L engine. These systems replace the stock muffler with straight pipe for an aggressive exhaust tone and increased performance. Maximum dyno gains of 15 hp and 16 lbs.-ft. were measured at the rear wheels. Their 2.50 in. mandrel-bent 409 stainless steel tubing is used to maximize exhaust flow and durability. Each system keeps the exhaust tip tucked up higher in the rear of the vehicle for better departure angle and minimizes the chance of hanging up on the exhaust when aggressively off-roading. A polished 3 in. stainless steel tip is used to add a custom look to the iconic Bronco vehicles. All necessary hardware is included and factory mounting locations are used for an easy installation.
Not Yet Reviewed
$219.95
$197.95
On Sale
MBRP XP Series exhaust systems are designed to withstand the toughest conditions, on and off the road. Their rugged, thick, 16-gauge stainless steel tubing won't rust through. They feature solid, reinforced welds at vital stress points, making certain that your system stays securely mounted. The MBRP XP Series mufflers and pipes deliver a rich, mellow exhaust note and are finished off with a mirror-polished, stainless steel, rolled-edge exhaust tip. They're available in a wide variety of styles and configurations to fit your specific vehicle.
( 243 )
$134.99
—
$324.99
$107.99
—
$259.99
On Sale
Pypes axle-back exhaust systems are designed to replace your OEM mufflers and tips without any modifications. They feature polished stainless steel construction with factory mounting positions. Available for today's popular vehicles, the Pypes axle-back exhaust systems provide the aggressive exhaust note that you've been searching for. Order the model tailored for your vehicle application.
( 19 )
$219.79
$194.79
On Sale
Hooker Super Competition Block Hugger headers are a great choice for your custom car, truck, or rod. Ideal for applications where the frame rails are close to the engine block. These headers feature a tucked-in tube design that's perfect for those tight-fit installations! Mandrel-bent, tuned-length primaries decrease backpressure and increase exhaust velocity, improving horsepower, torque, and throttle response. Their collectors are positioned for maximum starter and engine mount clearance; and exit parallel with the oil pan rail to allow for maximum ground clearance. Hooker Super Competition Block Hugger headers come complete with the gaskets, header bolts and collector reducers needed for a successful installation.
( 27 )
$414.95
$228.95
On Sale
aFe Saturn 4S exhaust tips are all-new intercooled exhaust tips. They are made from stainless steel and feature a single-walled, slant cut rolled tip with intercooling vents and a unique riveted laser-cut aFe Power logo plate adding aggressive style. These clamp-on tips are slotted for secure mounting and include a high-quality stainless steel band clamp for a complete 360 degree sealing surface. Give your exhaust the upgrade it deserves with aFe Saturn 4S exhaust tips.
Not Yet Reviewed
$143.85
$129.47
On Sale
Secure your tubing with Stainless Works V-band coupling clamps. They are manufactured from durable 304 stainless steel and include hardware for mounting. The clamps are available in different diameters to fit your specific exhaust pipe diameter.
( 4 )
$171.00
—
$219.45
$144.00
—
$184.80
On Sale
Cast from T304 stainless steel, the APR double-Y splitters allow for easy connection to a 76mm (3 in.) pipe and splits to a quad 63.5mm (2.5 in.) pipe. Your exhaust pipes simply butt up to the CNC-machined section of the casting for a clean transition and easy clamping point with a slip clamp. On the other ends, it provides a flat and clean welding point for dual 63.5mm (2.5 in.) pipes (16 gauge / 1.6mm or thinner). This results in a high-flow design with a smooth internal surface and internal transition. Each part comes electropolished for a bright and clean finish; and an indented APR logo on one side lets you display the part with pride. Notes (P/N EXH0146): * CNC-machined connection points * 150 degrees transition * 76mm (3 in.) clamp mounting point * 63.5mm (2.5 in.) welding mounting points * Smooth internal transition for uninterrupted airflow
Not Yet Reviewed
$299.95
$164.95
On Sale
Pypes M-80 round case mufflers are the perfect solution when mounting space is an issue. These mufflers feature a 'straight-through' exhaust flow path for maximum flow and a deep, aggressive tone.
( 65 )
$135.79
—
$140.79
$125.79
—
$130.79
On Sale
Cast from high-quality molds for proper fit, these Scott Drake exhaust manifolds will get that engine restoration on the right track to a throaty roar. Whether you are replacing a stock corroded manifold or getting to that exhaust portion of a rebuild, these manifolds will get that engine back to its deep throaty growl that you love.
( 37 )
$291.95
$262.75
On Sale
These BD Diesel exhaust manifolds help you maximize your engines true potential. Your stock manifolds can require extensive cleaning and machining to be recovered from warping and distortion. These heavy-walled manifolds are coated to resist corrosion, with some models even predrilled for pyrometer probes. BD Diesel exhaust manifolds are great preventative upgrades whenever you're doing other engine work.
( 45 )
$289.95
$260.96
On Sale
Authentic cast iron reproductions, Scott Drake high performance exhaust manifolds feature the correct markings and raised part numbers for these performance cars. They're engineered exactly like the original for longevity and trouble-free installation. Let your classic car breathe and hear that roar that screams power and performance.
( 40 )
$215.95
$194.35
On Sale
Hooker Blackheart LT swap exhaust manifolds are intended for GM LT engine swap applications where durability, quiet operation, and leak-free sealing is desired. The 2.5 in. outlet diameter offers improved flow for maximum performance from a cast iron exhaust manifold, and a tight tuck design provides a universal fit for most popular chassis, as well as a clean traditional muscle car appearance. OE-quality MLS flange gaskets and hardware are included to ensure excellent fitment and a leak-free installation. Hooker Blackheart LT swap exhaust manifolds are available in plain as-cast finish, or black or silver ceramic coatings for reduced engine compartment temps and improved corrosion-resistance. Features of Blackheart LT swap exhaust manifolds: * Cast from Hi-Silicon-Moly Ductile Iron * Contoured design guides the exhaust directly toward the exit port for improved flow and minimal turbulence * Nickel plated steel mating flanges, MLS mating flange gaskets, and mating flange hardware included for installation * Provides years of leak-free performance with less underhood noise than traditional headers * Shorty design means you can route exhaust tubing close to your frame/floor pan for maximum ground clearance * Patent Pending design
Not Yet Reviewed
$433.95
$238.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
