Availability
On Sale
BoostLine connecting rods are designed specifically for demanding turbocharged, supercharged, and big nitrous applications. The patented, 3-pocket body forged from premium 4340 steel incorporates the best features of both the H-beam (mass/weight) and I-beam (strength) designs. This provides 60 percent more bending strength compared to common H-beam rods. Each piece is heat-treated, shot-peened, and fitted with ARP-2000 cap screws (strong, malleable, and 220,000 psi rating) before final finish machining. Keep things straight with a set of BoostLine connecting rods (also available individually). Order the connecting rods in the model recommended for your specific engine size. Features, items, and specs: * High-quality Ampco bushing material used in the small end * Pin clearance at between 9-ten-thousandths and 11-thousandths of an inch (allows engine builder to custom set wrist pin spec, should additional clearance be necessary) * All BoostLine rods are individually inspected via a coordinate measuring machine (CMM) that is used to custom-match sets of rods to incredibly tight tolerances * Each rod includes an inspection report from the Wiseco Piston quality team * Rods are completely separated by thick foam for protection from shipping damage * Each rod is vacuum-wrapped in plastic for corrosion protection * Upgraded ARP 625+ bolts (260,000 to 280,000 psi) available
( 1 )
$274.99
—
$1,695.99
$247.49
—
$1,526.39
On Sale
Fleece Performance rear engine cover coolant return plugs add a finishing touch under the hood of your truck, such as when you're installing an aftermarket turbo. Machined from 6061 aluminum, the plugs feature an anodized black finish and are laser-etched with the Fleece "F." A high-temperature silicone O-ring is included to prevent leaks. Order the plug recommended for fitment on your vehicle.
Not Yet Reviewed
$13.99
$11.89
On Sale
Summit Racing™ Performance LS7 hydraulic roller lifters are a definite upgrade over stock originals. Designed for high horsepower engines that demand increased oiling and higher-rpm capabilities, these replacement lifters will fit in SBC roller engines, as well as LS-based engines without active fuel management (AFM/DOD). Beat the competition to the finish line with Summit Racing™ Performance LS7 hydraulic lifters!
( 19 )
$207.99
$204.99
On Sale
Holley LS engine accessory drive kits offer simple, clean, cost-effective solutions when swapping a GM LS engine into a muscle car, truck, hot rod, or any other vehicle. These bracket kits deliver a factory-style appearance, correct belt alignment, and factory stability. They fit virtually all common LS engines, regardless of water pump and harmonic balancer offsets—reducing cost and complexity. Holley LS engine accessory drive kits position the A/C compressor high above the crossmember, but below the hood line, for an easy installation. The brackets are manufactured from diecast aluminum with a natural, polished, or black finish. (An application-specific installation kit is required, but sold separately.)
( 52 )
$99.95
—
$603.95
$87.95
—
$448.95
On Sale
These Professional Products SFI Spec PowerForce Plus dampers provide more applications for a wider range of engines. All Professional Products PowerForce Plus dampers feature a bonding process, which adheres the elastomer to the i.d. of the inertia ring and the o.d. of the hub. Through subsequent research and development, Professional Products has perfected a new process that utilizes a stronger adhesive, along with an improved elastomer, to create a much stronger bond. Professional Products dampers all feature clear, white, easy-to-read timing marks against a painted black background. In addition, they engrave a mark every 90 degrees, which is also painted white (90 degree marks are not on small block Ford dampers). You won't find any dampers that are more accurately balanced or more closely machined for the correct fit than the Powerforce or Powerforce Plus line of high performance street or SFI Spec racing harmonic dampers.
( 73 )
$86.99
—
$215.99
$78.29
—
$194.39
On Sale
COMP Cams Chrysler Hemi phaser camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshafts to move in real time. Instead of scrapping this advanced system, COMP Cams has embraced it with a new line of aftermarket Hemi-specific cams. The patent-pending Hemi phaser camshafts work with phaser limiters or locks to fully utilize Chrysler's Variable Valve Timing (VVT) technology, which allows them to pick up torque in the low end of the engine, while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street/strip engines. Their unique, no-springs-required design maintains piston-to-valve clearance, while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks, and Mopar crate engines with VVT. COMP Cams Chrysler Hemi phaser camshafts are available as both custom and three different off-the-shelf grinds, dependent upon engine type, for improved performance over OEM options. They will require the COMP Cams phaser limiter or lock kits to limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and they are available separately.
( 5 )
$605.95
$545.36
On Sale
FiTech offers a line of stylish valve covers for LS-based engines. They provide a sleek, polished look that complements any engine bay, making them the perfect choice for those looking to enhance the visual appeal of their vehicle. The aluminum covers are crafted to deliver a custom look without compromising on compatibility. Select the size, style, and finish you prefer. Sold in pairs.
Not Yet Reviewed
$175.00
—
$315.00
$148.75
—
$267.75
On Sale
COMP Cams has awakened the muscle car sound--and it is nastier than ever! Thumpr Series camshafts is a line of cutting-edge hydraulic roller camshafts for engines originally equipped with flat tappet cams. With them, you can expect a substantial power increase without sacrificing reliability or ease of maintenance! The lobe profile and grind characteristics of Thumpr cams include blending an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap. This maximizes rough-idling tendencies, delivering a seriously aggressive exhaust note without affecting engine power output. Thumpr camshafts are available in a variety of grind profiles, each producing impressive horsepower and torque performance within a different rpm range.
( 17 )
$541.95
$487.76
On Sale
COMP Cams Nitrous HP camshafts are designed to work with your nitrous system to get more power from your engine. Their unique intake lobes allow your engine cylinders to fill better, for more complete combustion. Meanwhile, their exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system, without any loss of throttle response or torque in street applications.
( 12 )
$549.95
$439.96
On Sale
Are you looking for big torque and horsepower numbers? AFR's 325cc Magnum big block Chevy line of medium-volume intake runners will provide you with exactly that. The phrase "having your cake and eating it too" would certainly be appropriate with their moderately sized intake runners producing tremendous flow figures across the entire lift range. These high-flow/high-velocity ports provide extreme versatility and fill the needs of many applications. From a max-effort high-compression 454 to a 605 c.i.d. low-rpm marine application, these aluminum cylinder heads would be a great choice. AFR Magnum heads would also be ideal in larger cubic inch Pro Street applications with their broad torque range, as well as their significant rpm and horsepower capabilities. These cylinder heads will work best with a primary operating range of 3,000-7,000 rpm (this range is an average and will vary with engine displacement as well as component selection). These 325cc heads come standard with AFR's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The standard combustion chamber volume is 119cc on these AFR's 325 "as-cast" pieces. The heads are available with an optional 114cc combustion chamber as well.
( 1 )
$3,158.40
—
$4,050.90
$3,000.10
—
$3,848.45
On Sale
QuickTime offers bellhousing accessories, including these dowel pins, to help you to complete your project. They're made from quality material and are designed to correct the improper register bore alignment of bellhousing to your engine crankshaft center line.
( 4 )
$58.95
—
$83.35
$32.42
—
$45.84
On Sale
COMP Cams Nitrous HP retrofit camshafts are designed to work with your nitrous system to get more power from your engine. Their unique intake lobes allow your engine cylinders to fill better, for more complete combustion. Meanwhile, their exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system without any loss of throttle response or torque in street applications.
( 5 )
$549.95
$439.96
On Sale
World's Motown blocks are without a doubt the most feature-laden, engine builder friendly, cast iron blocks on the market. And because of their superior temperature control and rock-solid stability, experts claim they're worth up to 20 hp more than other blocks on the market! At first glance, one of the more noticeable differences between the World Motown and OEM Chevy blocks are the 'bulges' at each cylinder. That's because the Motowns have thicker cylinder walls, and the water jackets have been expanded to provide required cooling. Order the model and options preferred for your application. Important features are as follows: * Made from high-density cast iron * 9.025 in. deck height with .600 in. minimum thickness * Dry sump valley scavenge lines drilled * Clearanced for 4.000 in. stroker crankshafts (H-beam steel rods) * Integral mounts for spin-oil filter * Dry sump systems can feed from front or rear of block * Available with 4-bolt nodular or splayed billet caps * Can be bored to 4.200 inch maximum * Water jackets expanded for better cooling * Standard Chevy cam location and cam bearings * OEM starter, fuel pump, and engine mounts (dual) * Blind tapped head bolt holes for extra integrity * 100 percent compatible with OEM parts * Indexed lifter bores (can use standard-height lifters) * Main caps are located by dowels (not OEM outside register) * Weight: Approximately 190 lbs.
( 1 )
$4,549.46
—
$4,736.26
$4,094.51
—
$4,262.63
On Sale
Don't let their size fool you—AFR Magnum 305cc "as-cast" heads with a CNC bowl blend will provide you with flow numbers that most medium-sized heads, and some larger, can only dream about. This line was designed to optimize low and mid-lift airflow, while still generating impressive peak figures. Their application should be focused on smaller cu. in. Chevy big blocks (396-502) with a primary operating range of 2,500-6,800 rpm (this range is an average and will vary with engine displacement, as well as component selection). AFR 305cc Magnum BBC heads should also be given strong consideration in larger street-driven or marine applications up to 555 c.i.d., where low-rpm power and drivability are factors. These cylinder heads would be a great choice if you're looking for big torque and strong low-rpm performance and still have good rpm capabilities. The heads come standard with AFR's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.250 in. intake valves and 1.880 in. exhaust valves. Standard combustion chamber volume is 119cc. These heads are available with an optional 114cc combustion chamber as well.
( 1 )
$3,158.40
—
$4,050.90
$3,000.10
—
$3,848.45
On Sale
Are you looking for big torque and horsepower numbers? AFR's 335cc Magnum big block Chevy line of medium-volume intake runners will provide you with exactly that. The phrase "having your cake and eating it too" would certainly be appropriate with their moderately sized intake runners producing tremendous flow figures across the entire lift range (AFR CNC 335 heads flow 410 cfm!). These high-flow/high-velocity ports provide extreme versatility and fill the needs of many applications. From a max-effort, high-compression 454 to a 605 c.i.d. low-rpm marine application, these aluminum cylinder heads would be a great choice. AFR Magnum heads would also be ideal in larger cubic inch Pro Street applications with their broad torque range, as well as their significant rpm and horsepower capabilities. These cylinder heads will work best with a primary operating range of 3,000-7,000 rpm (this range is an average and will vary with engine displacement, as well as component selection). The 335cc heads come standard with AFR's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The standard combustion chamber volume for the fully CNC-ported 335cc is 121cc. They are available with an optional 114cc combustion chamber as well.
( 3 )
$4,344.90
—
$4,938.15
$4,127.75
—
$4,691.10
On Sale
Don't let their small size fool you—AFR Magnum fully CNC-ported 315cc aluminum cylinder heads will provide you with flow numbers that most medium sized heads, and some larger, can only dream about. This line was designed to optimize low and mid-lift airflow, while still generating impressive peak figures. Their application should be focused on smaller cu. in. Chevy big blocks (396-502) with a primary operating range of 2,500-6,800 rpm (this range is an average and will vary with engine displacement as well as component selection). AFR 315cc Magnum BBC heads should also be given strong consideration in larger street-driven or marine applications up to 555 c.i.d., where low-rpm power and drivability are factors. Extremely versatile with their incredibly strong low and mid-lift airflow figures, as well as peak numbers approaching the 400 cfm mark, the 315cc heads would be a great choice if you're looking for big torque and strong low-rpm performance and still have good rpm capabilities. They come standard with AFR's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.250 in. intake valves and 1.880 in. exhaust valves. Standard combustion chamber volume with AFR's fully CNC-ported 315cc version comes with a 121cc chamber. These AFR heads are available with an optional 114cc combustion chamber as well.
( 1 )
$4,344.90
—
$4,938.15
$4,127.75
—
$4,691.10
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
