Availability
Showing In Stock Items. Show All 18 Items.
On Sale
Made of titanium, these retainers will let you squeeze more RPM out of your engine and lighten up on your valve springs to avoid valve float. Manley lightweight titanium retainers do not sacrifice reliabity and weigh up to 5 grams less then a comparable steel piece.
Not Yet Reviewed
$25.14
$23.88
On Sale
Manley Pro Series I-beam connecting rods are forged from 4340 aircraft-quality vacuum degassed material. They're fully machined to produce the strongest rods possible. These rods are shot-peened to Mil specs and are 100 percent individually magnafluxed. They feature 7/16 in. ARP cap screws with 12-point heads and your choice of material grade to maximize your needed tensile strength! Manley Pro Series I-beam connecting rods are available in various sizes for a wide range of vehicles and horsepower ranges from 850 to 1,600 hp. Match up your specs, then order an individual rod or a larger set quantity.
Not Yet Reviewed
$231.45
—
$1,851.63
$219.88
—
$1,759.05
On Sale
These classic, race-winning 350/400 standard flat top JE Pistons work with most aftermarket 23 degree heads. They have extra-deep valve pockets and a low-friction skirt design. They are to be used with 1/16, 1/16, 3/16 or 1/16, 1/16, 3.0mm rings.
Not Yet Reviewed
$974.99
$877.49
On Sale
Rated at 400 hp, JE Pistons Ultralite gas ported pistons feature a contoured bottom band and a 2.400 in. length pin for maximum weight savings. Precision CNC-machined .043, .043, 3.0mm backcut ring grooves make these pistons the number-one choice for late model engine builders.
Not Yet Reviewed
$1,099.99
$989.99
On Sale
JE Ultra Series pistons combine all of the best, most desirable piston features, such as thermal barrier crown coating, lateral gas ports, thick-wall wrist pins, and a revolutionary new forging technology for the ultimate in strength. They are ready for massive power and boost right out of the box. Features of the JE Ultra Series pistons: * Grain flow optimized 2618 forging * Lateral gas ports improve ring seal * Ceramic crown coating—thermal barrier blocks combustion heat for durability and better exhaust scavenging characteristics * Perfect Skirt Coating—protects skirts, reduces friction, and eliminates cold-start piston slap and false knock on computer-controlled engines * Accumulator grooves reduce ring flutter at high rpm * Double broach pin oiling * Upgraded 9310 pins and locks—thicker, premium material wrist pins boosts strength * Carbon steel nitride rings
( 2 )
$224.99
$202.49
On Sale
JE Pistons offers 350 small block 23 degree flat top pistons for a wide range of applications, including many Chevy vehicles from 1967 and up. These replacements are forged using 2618 aluminum, yielding high tensile strength needed for high-demand performance. The pistons are designed specifically for each engine. Additional details: * Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin * Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise * Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. JE pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons' performance is proven in victory lane time and time again.
Not Yet Reviewed
$199.99
$179.99
On Sale
JE Pistons offers 400 small block 23-degree flat top pistons for a wide range of applications, including many Chevy vehicles from 1967 and up. These single replacements are forged using 2618 aluminum, yielding high tensile strength needed for high-demand performance. The pistons are designed specifically for each engine. Additional details: * Proprietary Forged Side Relief (FSR) forging design minimizes friction and power loss with reduced skirt width and saves additional weight with a shorter wrist pin * Skirt coating (depending on application) reduces friction and wear on piston skirts and cylinder walls while simultaneously reducing operating noise * Accumulator groove (depending on application) helps reduce pressure from combustion gases, reducing ring fluttering and improving ring seal for consistent power As the leader in forged racing pistons, JE Pistons has applied over 75 years of experience to its wide range of premium forged pistons for domestic applications. JE pistons are designed for each specific engine and racing application to provide the ultimate combination of durability and performance. From dirt track to drag strip, JE Pistons' performance is proven in victory lane time and time again.
Not Yet Reviewed
$199.99
$179.99
On Sale
Low Range Off-Road alternator conversion brackets allow you to upgrade to one of several common, larger alternators. They are laser-cut from plate steel and hand MIG-welded to perfection. Low Range Off-Road alternator conversion brackets are engineered for perfect alignment of the alternator belt, and include bracket mounting hardware. Looking to run bigger lights, a winch, or even just a better stereo system? Swap out your tiny stock alternator for more power, and mount it securely with LROR alternator brackets.
( 2 )
$15.18
—
$37.87
$12.90
—
$32.19
On Sale
A worn oil pump drive assembly will probably trigger a check engine light and will make a funny squeaking sound that has been described as a laughing barrel of monkeys, however it is no laughing matter. The factory design poses a lack of lubrication, resulting in premature failure. Crown Automotive oil pump drives are part of the OPDA. They provide your 4.0L Jeep with the perfect fit and performance, as well as peace of mind that you have averted the possibility of an event more disastrous and costly. These oil pump drives (cam stator shafts) are superior to your stock units, offering sturdy steel construction with oil channels for proper lubrication.
Not Yet Reviewed
$35.99
$32.39
On Sale
As you pull to the side of the road with gauge lights flashing and alarms dinging, it becomes obvious that your vehicle's lost the serpentine belt. Crown Automotive accessory belt tensioners are available to replace one of the most overlooked parts in the engine bay. These tensioners feature metal and hard plastic construction and include the bolt. They're produced to meet or exceed OE parts for fit, quality, and reliability. Don't let your Jeep become a disabled fixture on the highway shoulder; install Crown Automotive accessory belt tensioners to keep your serpentine system rolling.
( 2 )
$17.99
—
$118.99
$16.19
—
$107.09
On Sale
Complementing your Jimny front bumper should be Low Range Off-Road's Jimny rear bumper, offering the next level in aesthetics and performance. Thoughtfully designed to absorb impact, and protect your vehicle from damage both on and off the trail, these rear bumpers are made from 3/16 in. laser-cut steel. Featuring bolt-on installation, they require no welding and include a 2 in. receiver (not rated for towing) and taillights. LROR's Jimny rear bumpers are available in bare steel or with a durable black powdercoat finish. Choose your favorite.
Not Yet Reviewed
$458.85
—
$631.35
$390.02
—
$536.65
On Sale
Manley TensileMax steel valve spring retainers are designed for serious engine builders. They're as light as standard titanium retainers and within 2 to 4 grams of lightweight titanium versions. The tough alloy retainers are specially heat-treated to provide a hardness of Rc 52-54 and prevent retainer wear. Manley's exclusive process yields a part that delivers optimum balance between ultimate strength, fatigue strength, hardness, and ductility. A unique impingement process developed specifically for the TensileMax alloy and hardness range improves fatigue strength and promotes better oiling between the engine valve spring and retainer. They are available in a variety of sizes, individually or in larger sets.
Not Yet Reviewed
$29.45
—
$471.12
$27.98
—
$447.56
On Sale
APR 3.0 TFSI supercharger drive and crank pulley upgrade kits have been designed to dramatically increase the rotational speed of the factory supercharger. When combined with APR's Ultra-Charger Throttle Body Upgrade in a dual pulley setup, the system is alleviated of power robbing inlet restrictions, allowing the engine to achieve exciting new levels of performance! The supercharger drive pulley decreases the diameter of the factory pulley from 63.25mm to 57.75mm, which in turn spins the supercharger 9.5 percent faster. This results in a healthy bump in horsepower and torque across the entire rpm range with the supercharger operating at a higher rate of speed. The pulley is CNC-machined from billet stainless steel, E-coated factory black for an OEM appearance and is press fitted to the factory supercharger unit. The supercharger crank pulley increases the diameter of the factory pulley from 162mm to 187mm, which in turn spins the supercharger 15.4 percent faster. This results in a larger bump in horsepower and torque across the entire rpm range, as the supercharger is spinning at an even higher rate of speed. The pulley is CNC-machined from light weight billet aluminum with weight saving pockets throughout and has an anodized black finish and includes new crank pulley bolts. It retains the factory harmonically balanced crank pulley and bolts on top of the existing unit. Upgrading both the supercharger drive and crank pulleys results in the factory supercharger spinning faster than stock, which results in an even higher horsepower and torque gain across the entire rpm range. However, at the airflow levels achieved with a dual pulley setup, maximum power is severely restricted by the factory throttle body unit. APR's Ultra-Charger Throttle Body Upgrade is necessary to take full advantage of the dual pulley configuration and is available in platform specific variations for the B8/B8.5 A4/A4/S4/S5, Q5/SQ5 and C7 A6/A7.
Not Yet Reviewed
$599.95
$538.95
On Sale
BTR V2 Series camshafts are designed for excellent performance and drivability. The V2 is a revised camshaft that provides more average torque, higher peak power, and a maximum depth heat treatment. The maximum heat treatment depth is achieved by using cam cores made within a few thousandths of final grind size. Numerous grinds for turbo, supercharged, and naturally aspirated engines are available for your project—all backed by years of experience, knowledge, and a passion for power. BTR V2 Series camshaft features include: * Revised camshaft center lines for increased average torque * Engine dyno verified to produce more power * Each "stage" has a specific cam core * Maximum heat treatment penetration
( 2 )
$409.99
$368.99
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
