Availability
On Sale
The aFe twisted steel turbo downpipes are designed to replace stock pipes. Mandrel-bent throughout, these quality-built turbo pipes are an ideal upgrade to a cat-back system, offering the option to upgrade to high performance catalytic converters. These twisted steel turbo downpipes help reduce backpressure and lower EGTs for better performance. They also provide a more aggressive sound and are built with durable, high-quality materials like 304 or 409 stainless steels for strength and corrosion resistance. Choose the aFe turbo downpipes for your application needs.
Not Yet Reviewed
$1,203.30
$1,082.97
On Sale
Airflow Research developed these 185cc SBF Enforcer cylinder heads for maximum small block Ford performance. They're manufactured from tough but lightweight A356 aluminum and feature 185cc intake runners and 64cc combustion chambers. Enforcer heads feature a 0.325 in. deck, stock valve locations, and are designed for blocks with a minimum bore of 4.000 in. The heads are available bare or fully assembled with stud mount rocker mounting.
( 21 )
$767.55
$690.80
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$975.50
—
$1,578.50
$877.95
—
$1,420.65
On Sale
AFR 260cc LS3 Mongoose cylinder heads are 100 percent 5-axis, CNC-ported, and feature titanium retainers, A356 aluminum castings, and Pac Racing springs. These CARB certified heads require 4.000 in. or larger bore applications on up through 454 cu. in. engines operating at or below 7,000 rpm—and flow over 380 cfm at 0.700 in. lift and are designed primarily for street and strip applications. Other structural features include Air Flow Research's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. Use of AFR stud girdles and full roller rocker arms are required. When it comes to building power, start with these AFR 260cc LS3 Mongoose cylinder heads.
( 5 )
$3,011.40
—
$3,490.20
$2,860.45
—
$3,315.50
On Sale
AFR 245cc NPP SBC Eliminator racing cylinder heads are their largest and most powerful 60/40 head for the small block Chevy. These competition-ported heads feature 100 percent CNC-machined intake runners, exhaust ports, and combustion chambers. With A356 aluminum castings and high-quality components throughout, these NPP—no pushrod pinch—units have extra machining for 3/8 in. pushrod clearance. AFR 245cc NPP SBC Eliminator heads are offered with stock or spread port exhaust, and steel or titanium retainers, as well as bare.
( 1 )
$3,492.30
—
$4,204.20
$3,317.40
—
$3,993.80
On Sale
Are you building your own personal street/strip weapon? These AFR 195cc SBF Competition cylinder heads are designed for you. To make big horsepower, you need heads that can flow large amounts of air--that's where AFR, the masters of airflow come in. These heads feature a 195cc intake port, 70cc exhaust ports, and your choice of 58 or 72cc combustion chambers to complement your engine. To get the fuel and air in and out efficiently, AFR uses lightweight 8mm 2.050 intake valves and 1.600 exhaust valves. The thick deck makes these heads ideal for nitrous or blower applications with the optional nitrous/blower exhaust port. These heads are most at home on performance engines operating primarily between 2,000 and 7,000 rpm. Dominate the street and strip with the help of AFR and these 195cc SBF Competition cylinder heads.
( 1 )
$2,686.95
—
$2,947.35
$2,552.65
—
$2,799.65
On Sale
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,291.95
—
$2,308.95
$1,162.76
—
$2,078.06
On Sale
Looking to increase the performance of your Gen III-powered vehicle? AFR 212cc Black Hawk Gen 3 Hemi cylinder heads are to be offered in as-cast and fully CNC ported versions, either assembled or as no-parts (bare) heads to provide the power and performance Mopar enthusiasts crave. Manufactured using A356 aluminum and permanent-mold technology, AFR castings are second to none. Assembled pairs will come with high-quality components, such as PAC Racing springs, Titanium (CNC versions) or stainless steel retainers, AFR valves, and Viton® valve seals.
Not Yet Reviewed
$1,805.00
—
$2,105.00
$1,714.75
—
$1,999.75
On Sale
Edelbrock Pro-Port raw cylinder heads are un-ported versions of the Edelbrock race-winning Victor Series CNC heads for the professional cylinder head porter and engine builder. Pro-Port raw cylinder heads are cast with extra-thick walls to allow for custom CNC porting. They are the only heads designed specifically to accommodate almost any CNC port shape, size or location. Some Edelbrock Pro-Port raw heads feature their special Hot Isostatic Pressing or HIP Process.
Not Yet Reviewed
$2,340.50
$1,872.40
On Sale
Are you looking for big torque and horsepower numbers? AFR's 325cc Magnum big block Chevy line of medium-volume intake runners will provide you with exactly that. The phrase "having your cake and eating it too" would certainly be appropriate with their moderately sized intake runners producing tremendous flow figures across the entire lift range. These high-flow/high-velocity ports provide extreme versatility and fill the needs of many applications. From a max-effort high-compression 454 to a 605 c.i.d. low-rpm marine application, these aluminum cylinder heads would be a great choice. AFR Magnum heads would also be ideal in larger cubic inch Pro Street applications with their broad torque range, as well as their significant rpm and horsepower capabilities. These cylinder heads will work best with a primary operating range of 3,000-7,000 rpm (this range is an average and will vary with engine displacement as well as component selection). These 325cc heads come standard with AFR's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The standard combustion chamber volume is 119cc on these AFR's 325 "as-cast" pieces. The heads are available with an optional 114cc combustion chamber as well.
( 1 )
$3,158.40
—
$4,050.90
$3,000.10
—
$3,848.45
On Sale
Don't let their size fool you—AFR Magnum 305cc "as-cast" heads with a CNC bowl blend will provide you with flow numbers that most medium-sized heads, and some larger, can only dream about. This line was designed to optimize low and mid-lift airflow, while still generating impressive peak figures. Their application should be focused on smaller cu. in. Chevy big blocks (396-502) with a primary operating range of 2,500-6,800 rpm (this range is an average and will vary with engine displacement, as well as component selection). AFR 305cc Magnum BBC heads should also be given strong consideration in larger street-driven or marine applications up to 555 c.i.d., where low-rpm power and drivability are factors. These cylinder heads would be a great choice if you're looking for big torque and strong low-rpm performance and still have good rpm capabilities. The heads come standard with AFR's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.250 in. intake valves and 1.880 in. exhaust valves. Standard combustion chamber volume is 119cc. These heads are available with an optional 114cc combustion chamber as well.
( 1 )
$3,158.40
—
$4,050.90
$3,000.10
—
$3,848.45
On Sale
AFR 300cc Magnum BBC cylinder heads are suggested for aggressive builds. They boast 100 percent CNC-ported intake, exhaust, and chambers—as well as A356 aluminum casting and high-quality components throughout. These oval port competition packages are available with hydraulic or solid roller springs; and bare or assembled style.
( 3 )
$3,690.75
—
$4,336.50
$3,506.45
—
$4,120.15
On Sale
AFR 265cc Oval Port Magnum BBC cylinder heads are designed to be used on engine displacement up to 468 cu. in. operating at or below 6,200 rpm—providing tons of bottom-end torque, tremendous throttle response, and great all-around power. Recommended for street, strip, or towing applications, these torque monsters can flow 354 cfm at 0.650 in. lift. These units feature a 3/4 in. thick deck, along with reinforced rocker stud bosses, and thick, rugged castings. Want high-flowing power? Then choose these 265cc Oval Port Magnum BBC cylinder heads from AFR. Additional features include: * Intake runners and exhaust ports are partially CNC-machined * Competition 5-angle valve job * 3/8 in. guideplates * A356 aluminum material
( 9 )
$2,484.30
—
$3,214.05
$2,359.80
—
$3,053.30
On Sale
If huge horsepower is what you are searching for, AFR 357cc Magnum aluminum cylinder heads will certainly deliver. With AFR's fully CNC-ported 357cc heads flowing 425 cfm, they represent the ultimate in airflow for your big block Chevrolet. These cylinder heads were targeted at larger cu. in. engines (509-632 c.i.d.) looking for maximum horsepower and rpm capabilities with a primary operating range of 3,500-8,000 rpm (this range is an average and will vary with engine displacement and component selection). These aluminum heads also provide impressive torque figures at higher rpm levels. Blown, turbo, and nitrous engines will especially like the larger, higher flowing intake ports. AFR 357cc Magnum BBC cylinder heads will work best with camshafts exceeding 0.750 in. gross valve lift to make better use of the substantial airflow found in the higher lift range. The AFR 357cc heads come standard with AFR's trademark 3/4 in. thick cylinder head deck, reinforced rocker stud bosses, and premium one-piece stainless steel 2.300 in. intake and 1.880 in. exhaust valves. The AFR's fully CNC-ported 357 heads come with a 121cc chamber and are available with an optional 114cc combustion chamber as well. Order the cylinder head model suited to your needs.
Not Yet Reviewed
$4,591.65
—
$5,184.90
$4,362.40
—
$4,925.75
On Sale
AFR 220cc SBF Renegade 20 Degree Competition Heads are the largest, best-flowing choice to top your small block Ford. These power-producing cylinder heads are born of A356 aluminum castings and feature intake ports, exhaust ports, and combustion chambers that are all 100 percent CNC-ported. Renegades are outfitted with lightweight 8mm, 2.100 in. intake valves and 1.570 in. exhaust valves to move massive amounts of air. They come with either combustion chamber volumes of 58 or 72cc accompanied by 70cc exhaust ports, which are raised .375 in. higher than stock. Plus, AFR's trademark 3/4 in. thick cylinder head deck makes them ideal for heavy nitrous or blower applications. Choose the flow characteristics that can give your Ford the power to win—AFR 220cc SBF Renegade 20 degree competition heads.
( 12 )
$2,837.10
—
$3,143.70
$2,695.15
—
$2,986.80
On Sale
AFR 377cc Magnum BBC Competition racing heads feature 100 percent CNC-ported intakes, exhausts, and chambers; A356 aluminum castings, Titanium retainers, and high-quality components throughout. These Magnum BBC heads are best suited for large displacement (540 plus) racing engines operating at or below 7600 rpm. They are available assembled and bare. AFR assembled 377cc Magnum BBC heads typically include: * 11/32 in. intake valves * 11/32 in. Tulip exhaust Valves * PAC Racing Spring 1.625 O.D. Solid Roller, 275 lbs. on seat, .850 maximum lift * 10 degree Titanium retainers * 10 degree 11/32 in. valve locks with lash cap recess * ARP 7/16 in. rocker intake and exhaust studs * Adjustable 3/8 in. guide plates * 11/32 in. Viton® valve seals * Hardened spring cup * Intake and exhaust valve seats * 11/32 in. intake and exhaust bronze valve guides
Not Yet Reviewed
$4,601.10
—
$5,344.50
$4,370.95
—
$5,077.75
On Sale
AFR 385cc Magnum BBC competition racing heads will feed your large displacement, high-rpm race engine the air it needs to deliver monster performance. The 385cc Magnum features AFR's trademark .750 in. thick head deck, A356 aluminum castings and Titanium retainers, as well as 100 percent CNC-ported intakes, exhausts, and combustion chambers to deliver the big flow characteristics to provide you with the power you need to win! Keep your monster engine both strong and powerful—allow it to feast on the plentiful airflow of the AFR 385cc Magnum BBC competition racing heads.
Not Yet Reviewed
$4,601.10
—
$5,344.50
$4,370.95
—
$5,077.75
On Sale
AFR 457cc Magnum BBC 18 degree cylinder heads were built specifically for high horsepower race applications. The Magnum 18 heads flow an impressive 498 cfm at 1.000 in. lift with 457cc runners, 90cc combustion chamber, and 143cc exhaust. The intake ports are raised .500 in. with the valves rolled to 18 degree, resulting in unparalleled under-the-curve flow numbers. These big block Chevy heads are ideal for 540 cu. in. or larger race engines. AFR has been defining what it means to make power on Chevy engines for years. Now you can strap on a pair of their best performing, highest flowing heads, their 457cc Magnum BBC 18 degree cylinder heads.
Not Yet Reviewed
$2,665.95
—
$3,273.90
$2,532.70
—
$3,110.30
On Sale
Looking to increase the performance of your Gen III-powered vehicle? AFR 224cc Black Hawk Gen 3 Hemi cylinder heads are to be offered in as-cast and fully CNC ported versions, either assembled or as no-parts (bare) heads to provide the power and performance Mopar enthusiasts crave. Manufactured using A356 aluminum and permanent-mold technology, AFR castings are second to none. Assembled pairs will come with high-quality components, such as PAC Racing springs, Titanium (CNC versions) or stainless steel retainers, AFR valves, and Viton® valve seals.
Not Yet Reviewed
$1,805.00
—
$2,105.00
$1,714.75
—
$1,999.75
On Sale
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 5 )
$1,023.75
$921.38
On Sale
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 2 )
$780.15
$702.14
On Sale
Edelbrock Performer RPM 454-O high-compression cylinder heads offer smaller ports for bigger performance. Designed for big block Chevy's with oval ports, these cylinder heads feature unique oval intake ports that flow similar to rectangular ports but the smaller size provides excellent seat-of-the-pants performance plus crisp throttle response! And, the 100cc chamber volume is ideal for your high-compression application. Both the intake and exhaust ports of these Performer RPM heads have been profiled for improved air flow and they have smaller-than-stock valve stems for less weight and excellent flow. More flow, more power, and more performance for your big block application comes with a set of Edelbrock Performer RPM 454-O high-compression cylinder heads.
( 13 )
$1,214.50
—
$1,251.50
$1,093.05
—
$1,126.35
On Sale
If you need the world's finest high performance street/strip small block Ford heads, then check out AFR's 185cc emissions-legal Renegade Street cylinder heads (CARB E.O. #250-3). With lightweight 8mm, 2.020 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 or 72cc, and 68cc exhaust ports, AFR's 185cc Ford cylinder heads are designed for 302-351 c.i.d. engines operating from 1,500 to 6,500 rpm. A 3/4 in. thick head deck makes the AFR heads ideal for nitrous or blower applications. These heads will not accept rail rocker arms, and hardened push rods are required on models designed for stud mount rocker arms.
( 37 )
$2,049.60
—
$2,328.90
$1,947.50
—
$2,212.55
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,065.50
—
$1,933.50
$870.00
—
$1,740.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
