Availability
Showing In Stock Items. Show All 62 Items.
On Sale
PRW cylinder head stud kits offer heavy-duty fasteners, along with 12-point nuts and washers for Ford Powerstroke engines. These replacement studs are machined from 4135 chromoly steel and finished with a black oxide. They provide superior clamping power, compared to the stock bolts—which will solve the problem of head gasket failure caused by increased cylinder pressure.
( 1 )
$131.19
—
$782.96
$111.51
—
$665.52
On Sale
These Summit Racing™ top end Pro Packs are guaranteed to give your engine a shot in the arm. We have taken out the guesswork and matched up all of these components for maximum bolt-on power, right out of the box. Get one of these Summit Racing™ top end Pro Packs and put your motor on track for some serious horsepower. Features include: * Pair of cylinder heads that will outflow your stock heads * Head bolts * Intake manifold * Intake gaskets * Intake bolts
( 1 )
$3,338.65
—
$6,972.87
$3,122.75
—
$6,921.38
On Sale
AFR 260cc LS3 Mongoose cylinder heads are 100 percent 5-axis, CNC-ported, and feature titanium retainers, A356 aluminum castings, and Pac Racing springs. These CARB certified heads require 4.000 in. or larger bore applications on up through 454 cu. in. engines operating at or below 7,000 rpm—and flow over 380 cfm at 0.700 in. lift and are designed primarily for street and strip applications. Other structural features include Air Flow Research's trademark 3/4 in. thick head deck, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. Use of AFR stud girdles and full roller rocker arms are required. When it comes to building power, start with these AFR 260cc LS3 Mongoose cylinder heads.
( 5 )
$3,490.20
$3,315.50
On Sale
When replacing the stock VGT turbo on your 6.7L Cummins with a non-water-cooled turbo, these delete plugs from Fleece Performance are a must. They conveniently fit the stock coolant feed from the riser block and coolant return on the firewall. Kit includes: * Two 16mm Allen head port plugs * One 18mm Allen head port plug
Not Yet Reviewed
$29.95
$25.46
On Sale
Edelbrock Performer RPM aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. These heads offer improved power throughout the RPM range for greater throttle response and top-end horsepower. Countless options are available; order the model recommended for your vehicle and engine application.
( 165 )
$975.50
—
$1,578.50
$877.95
—
$1,420.65
On Sale
All Edelbrock aluminum cylinder heads feature threaded inserts in the rocker studs and exhaust manifold bolt holes for superior strength and durability. They also include hardened seats, bronze valve guides, and fully machined valve cover rails for a more consistent gasket seal. They offer improved power throughout the rpm range for greater throttle response and top-end horsepower. The intake and exhaust runners are CNC-machine profiled for superior flow and performance.
( 41 )
$1,065.50
—
$1,933.50
$870.00
—
$1,740.15
On Sale
These Performer RPM Chrysler Magnum heads give substantial performance improvements for street/strip and off-road performance use. They offer an easy bolt-on engine upgrade with substantial out-of-the-box performance gains. Stock Magnum intake and exhaust flange and port locations make these heads an ideal choice for use with stock equipment as well as the new RPM Air-Gap manifold. These heads feature a slight increase in compression over the factory heads, offer more flow than stock, and accept adjustable aftermarket rocker arms. These heads are available in bare or assembled versions; hardened pushrods are required.
( 10 )
$1,214.50
—
$1,251.50
$1,093.05
—
$1,126.35
On Sale
Edelbrock Performer RPM 348/409 Chevy cylinder heads have been specifically designed for the 1961-65 Chevy W Series 348/409 big block engines. These Performer RPM heads feature aluminum construction with original port locations and valve angles for bolt-on convenience. The CNC port-matched 220cc intake runners and 90cc exhaust ports optimize flow and power throughout the entire rpm range. With their new, improved port design, the Edelbrock Performer RPM 348/409 Chevy cylinder heads are sure to add some easy bolt-on horsepower to your engine.
( 1 )
$1,628.50
—
$1,665.50
$1,465.65
—
$1,498.95
On Sale
Engineered for maximum performance, the new E-Tec Series aluminum cylinder heads fit all small Chevys with Vortec-style intake manifolds. They incorporate Edelbrock's new high-quench 64cc combustion chamber design, which promotes a more uniform atomization of the air/fuel mixture for increased power. Available with 170cc or 200cc intake runners, these cylinder heads are assembled with one-piece stainless steel valves, 1.46 in. valve springs, retainers, and locks. The E-Tec models accept either centerbolt or standard valve covers, and work with most exhaust manifolds and headers. Match your vehicle specs to the correct Edelbrock head for precise fitment.
( 13 )
$936.50
—
$1,124.50
$842.85
—
$1,012.05
On Sale
AFR 227cc SBC Eliminator Competition Racing heads are 100 percent CNC-ported, with finer machine levels and improved port-shaped details for optimum flow characteristics, giving you the power you need to win. The 227cc SBC Eliminator heads have a 3/4 in. thick head deck ideal for nitrous or blower applications. They come complete and ready-to-run with AFR power-proven components for ultimate power and reliability. Or choose "bare" heads (no parts) to design your own ultimate power package. These heads are available in standard and spread port exhausts. Bolt-on high performance with AFR 227cc SBC Eliminator Competition racing heads—you'll be the baddest thing on four wheels!
Not Yet Reviewed
$3,279.15
$3,115.05
On Sale
You're taking a step up in performance with Edelbrock E-205 small block Ford cylinder heads. Featuring larger runners for increased airflow, revised exhaust ports, and larger diameter springs for higher lift camshafts, Edelbrock E-205 cylinder heads are ideal for spec series racers and larger displacement engines. They are able to support the power that you need to compete--more than 500 naturally aspirated horsepower and even more in forced induction applications! Get race-level performance with OEM compatibility when you bolt on a pair of Edelbrock E-205 cylinder heads.
( 2 )
$1,687.95
—
$1,838.95
$1,519.16
—
$1,655.06
On Sale
Airflow Research developed these 185cc SBF Enforcer cylinder heads for maximum small block Ford performance. They're manufactured from tough but lightweight A356 aluminum and feature 185cc intake runners and 64cc combustion chambers. Enforcer heads feature a 0.325 in. deck, stock valve locations, and are designed for blocks with a minimum bore of 4.000 in. The heads are available bare or fully assembled with stud mount rocker mounting.
( 21 )
$767.55
$690.80
On Sale
AFR's 335cc BBC Enforcer cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 509 to 540 cu.in. operating below 6,500 rpm. They come fully assembled with the identical components found in AFR's higher end CNC-ported cylinder heads—such as ARP rockers studs, PAC Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks (not stamped), hardened spring seats, and AFR's one-piece 8mm 21 4N stainless steel valves. Order the cylinder heads recommended for your year/make and engine application.
( 5 )
$1,023.75
$921.38
On Sale
Are you looking for a set of entry-level street performance heads for your modern street rod, muscle car, or truck? Edelbrock E-Street cylinder heads are just the ticket. These heads feature A356 aluminum castings that are heat-treated to T-6 specs for superior casting strength and quality. Their modern combustion chamber design helps to improve the combustion process and their larger-than-stock intake and exhaust ports help to move more air through your engine. These features improve an engine's efficiency, resulting in more horsepower and torque and improved mileage potential. All Edelbrock E-Street cylinder heads are assembled with manganese bronze valve guides, powder metal interlocking valve seats, and stainless steel one-piece valves with hardened valve tips. Edelbrock E-Street cylinder heads are ideal for entry level street performance engines.
( 119 )
$1,291.95
—
$2,308.95
$1,162.76
—
$2,078.06
On Sale
AFR 210cc LS1/LS2/LS6 Enforcer cylinder heads are available in standard and small bore applications. They feature Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners, and combustion chambers that allow for extremely accurate and repeatable port location/performance. The budget-friendly heads are perfect for your OEM engine operating below 6,300 rpm. Fully assembled Enforcer models include the identical components found in AFR's higher end CNC-ported cylinder heads—such as PAC Racing springs, Viton® valve seals, machined bead valve locks (not stamped), hardened spring seats, and one-piece 8mm 21 4N stainless steel valves. The heads are available without any parts for the DIY. Sold as a single piece, two heads are required per engine.
( 2 )
$780.15
$702.14
On Sale
Think you have to scour the local bone yards to find a decent set of GM's old double hump or fuelie cylinder head castings? Not true. In fact, we've brought back classic Chevy performance in a big way with these ready-to-run heads for small block Chevy. Our versions of the popular GM cylinder heads offer great performance for less than it would cost to rebuild an old set of double hump castings.
( 127 )
$649.99
$499.99
On Sale
If you need the world's finest high performance street/strip small block Ford heads, then check out AFR's 185cc emissions-legal Renegade Street cylinder heads (CARB E.O. #250-3). With lightweight 8mm, 2.020 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 or 72cc, and 68cc exhaust ports, AFR's 185cc Ford cylinder heads are designed for 302-351 c.i.d. engines operating from 1,500 to 6,500 rpm. A 3/4 in. thick head deck makes the AFR heads ideal for nitrous or blower applications. These heads will not accept rail rocker arms, and hardened push rods are required on models designed for stud mount rocker arms.
( 37 )
$2,328.90
$2,212.55
On Sale
Edelbrock Performer RPM 454-O high-compression cylinder heads offer smaller ports for bigger performance. Designed for big block Chevy's with oval ports, these cylinder heads feature unique oval intake ports that flow similar to rectangular ports but the smaller size provides excellent seat-of-the-pants performance plus crisp throttle response! And, the 100cc chamber volume is ideal for your high-compression application. Both the intake and exhaust ports of these Performer RPM heads have been profiled for improved air flow and they have smaller-than-stock valve stems for less weight and excellent flow. More flow, more power, and more performance for your big block application comes with a set of Edelbrock Performer RPM 454-O high-compression cylinder heads.
( 13 )
$1,214.50
—
$1,251.50
$1,093.05
—
$1,126.35
On Sale
Deliver power-building airflow to your engine with Summit Racing™ Vortec cast iron cylinder heads. These heads outflow the early model small Chevy heads with wide-open intake runners, efficient combustion chambers, and a high-performance valve job. They are made from a strong cast iron alloy that makes them less brittle than comparable Vortec heads on the market. For performance and great value, select the Summit Racing™ Vortec cast iron cylinder heads preferred for your build.
( 74 )
$649.99
$499.99
On Sale
AFR 220cc SBF Renegade 20 Degree Competition Heads are the largest, best-flowing choice to top your small block Ford. These power-producing cylinder heads are born of A356 aluminum castings and feature intake ports, exhaust ports, and combustion chambers that are all 100 percent CNC-ported. Renegades are outfitted with lightweight 8mm, 2.100 in. intake valves and 1.570 in. exhaust valves to move massive amounts of air. They come with either combustion chamber volumes of 58 or 72cc accompanied by 70cc exhaust ports, which are raised .375 in. higher than stock. Plus, AFR's trademark 3/4 in. thick cylinder head deck makes them ideal for heavy nitrous or blower applications. Choose the flow characteristics that can give your Ford the power to win—AFR 220cc SBF Renegade 20 degree competition heads.
( 12 )
$3,143.70
$2,986.80
On Sale
For the ultimate small block Ford street car, consider AFR 165cc SBF Renegade 20 degree street heads. Unlike some aftermarket heads, AFR's Ford cylinder heads (CARB E.O. # D250-3) fit all of your stock components; no special parts are required! With lightweight 8mm, 1.900 in. intake valves and 1.600 in. exhaust valves, combustion chamber volumes of 58 and 60cc, and 68cc exhaust ports, these emissions-legal aluminum cylinder heads are perfect for 289 and 302 engines operating from idle to 6,000 rpm. A 3/4 in. thick head deck makes the heads ideal for nitrous or blower applications. Renegade cylinder heads will not accept rail rocker arms, and hardened pushrods are required on models designed for stud mount rocker arms.
( 28 )
$2,328.90
$2,212.55
On Sale
Designed for 396-502 c.i.d. big block Chevy engines, these Edelbrock cylinder heads include heavy-duty exhaust valves that provide the added durability needed for marine applications, and have one-piece, stainless steel intake valves with hardened tips and swirl-polished heads. The high-velocity flow capabilities of Edelbrock Performer RPM cylinder heads provide increased torque across a wide rpm range that's ideal for marine use. They're cast from A356 aluminum and heat-treated to T6 specs. Their oval-port heads have 110cc chambers and their rectangular port heads have 118cc chambers. Both the oval and rectangular port heads are hard-anodized to protect the aluminum in the harsh marine environments.
( 2 )
$1,780.50
$1,602.45
On Sale
Recommended for aggressive street/strip builds with displacements up to 427 c.i. operating at or below 7200 rpm. Capable of flowing 328 cfm at 0.650 in. lift with a 4.000 in. bore size. AFR street legal 230cc LS1 Mongoose strip cylinder heads are specifically designed for Gen III Chevy Corvettes, Camaros, and trucks. LSX cylinder heads offer unmatched flow performance and feature 2.080 in. intake and 1.600 in. exhaust valves with their ductile iron interlocking valve seats. Mongoose strip heads are available with 62cc, 65cc, and 72cc combustion chambers. Structural features like AFR's trademark 3/4 in. thick head deck, a must for blown and nitrous applications, reinforced rocker stud bosses, and thick wall runners provide unparalleled durability. An exclusive new modern combination chamber design with a double quench pad area helps the LSX generate huge low and mid-lift airflow numbers.
( 7 )
$3,332.70
$3,166.35
On Sale
AFR 200cc SBC Enforcer Cylinder heads feature their Permanent Mold "As-Cast" Technology surfaces on the intake runners, exhaust runners and combustion chambers that allow for extremely accurate and repeatable port location/performance. These budget-friendly heads are perfect for your 350 to 400 cu. in. operating below 6,000 rpm. They come fully assembled with the identical components found in their higher end CNC-ported cylinder heads, such as ARP rockers studs, Melling Racing springs, Viton® valve seals, AFR adjustable guide plates, machined bead valve locks, hardened spring cups and ductile iron seats, and their one-piece 8mm 21 4N stainless steel valves. The AFR 200cc SBC Enforcer cylinder heads are available in straight or angle plug, assembled or bare.
( 2 )
$789.60
$710.64
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
