Availability
Showing In Stock Items. Show All 32 Items.
On Sale
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.
( 1 )
$579.95
—
$605.95
$521.96
—
$545.36
On Sale
COMP Cams HRT Stage 2 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. These new HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads.
( 1 )
$579.95
—
$605.95
$521.96
—
$545.36
On Sale
COMP Cams LSR Series hydraulic roller camshafts feature modern lobe profiles that take full advantage of high-flowing late model GM LS3 rectangular port cylinder heads. They are tailored for a specific rpm range and usage, from torque to high-rpm horsepower. Give your Chevy LS3 engine a shot in the arm with one of these COMP Cams LSR Series hydraulic roller camshafts.
( 26 )
$541.95
—
$566.95
$453.56
—
$487.76
On Sale
COMP Cams Chrysler Hemi phaser camshafts utilize Variable Valve Timing (VVT) technology to maximize power and performance in stock and street/strip applications. The new Hemi engines from Chrysler are great power plants straight from the factory, with technology that allows the camshafts to move in real time. Instead of scrapping this advanced system, COMP Cams has embraced it with a new line of aftermarket Hemi-specific cams. The patent-pending Hemi phaser camshafts work with phaser limiters or locks to fully utilize Chrysler's Variable Valve Timing (VVT) technology, which allows them to pick up torque in the low end of the engine, while maintaining power up high. Made from a billet core, these hydraulic roller cams are engineered tough enough to handle 5.7L and 6.4L Hemi street/strip engines. Their unique, no-springs-required design maintains piston-to-valve clearance, while enabling high performance lobes utilizing VVT, making them perfect for late model Dodge Challengers, Dodge Chargers, Chrysler 300s, Jeeps, Dodge trucks, and Mopar crate engines with VVT. COMP Cams Chrysler Hemi phaser camshafts are available as both custom and three different off-the-shelf grinds, dependent upon engine type, for improved performance over OEM options. They will require the COMP Cams phaser limiter or lock kits to limit the degree of maximum cam phasing to 14 crank degrees (7 cam degrees) and they are available separately.
( 5 )
$605.95
$545.36
On Sale
COMP Cams XFI RPM camshafts pull your performance set up all together. Offering the newest and quickest lobe profiles, their selection of XFI RPM cams get you the best combination of torque, horsepower, and even gas mileage (if you want) to tailor your application. Make the right choice in valvetrain technology; you have a goal and so does COMP Cams--reliable high performance!
( 11 )
$541.95
$487.76
On Sale
COMP Cams Xtreme fuel injected camshafts are designed for late model applications. Ground using faster-opening and more efficient ramp profiles, Xtreme camshafts are engineered for 1.6 ratio rocker arms and beehive valve springs, which provide a dramatic increase in torque and horsepower.
( 29 )
$522.95
—
$579.95
$418.36
—
$521.96
On Sale
COMP Cams Xtreme 4x4 camshafts are built to take advantage of the latest cam technology to provide maximum performance and torque for your vehicle. Whether your use is off-roading or towing, there is an Xtreme 4x4 for you. By using an aggressive lobe profile, these cams provide better throttle response and more mid and top-end horsepower.
( 48 )
$549.95
$439.96
On Sale
Give your Mustang more muscle! COMP Cams CR Series camshafts increase power and torque capabilities throughout the curve. They greatly improve upon stock Coyote camshafts and work without modifications to the engine's cylinder heads or phasers. Camshafts are the best way to unlock the power potential of your Coyote engines. The CR Series is offered in three stages for naturally aspirated and turbo engines, as well as two separate grinds for blower applications. Designed to be a direct replacement, the CR Series camshafts, they are compatible with the stock valve springs and the new Ford mid-lock phaser system—without requiring limiters or any other phaser modifications.
Not Yet Reviewed
$2,013.95
$1,611.16
—
$1,812.56
On Sale
COMP Cams has awakened the muscle car sound--and it is nastier than ever! Thumpr Series camshafts is a line of cutting-edge hydraulic roller camshafts for engines originally equipped with flat tappet cams. With them, you can expect a substantial power increase without sacrificing reliability or ease of maintenance! The lobe profile and grind characteristics of Thumpr cams include blending an early exhaust valve opening, a long exhaust duration, and a generous amount of intake and exhaust overlap. This maximizes rough-idling tendencies, delivering a seriously aggressive exhaust note without affecting engine power output. Thumpr camshafts are available in a variety of grind profiles, each producing impressive horsepower and torque performance within a different rpm range.
( 17 )
$541.95
$487.76
On Sale
COMP Cams Nitrous HP camshafts are designed to work with your nitrous system to get more power from your engine. Their unique intake lobes allow your engine cylinders to fill better, for more complete combustion. Meanwhile, their exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system, without any loss of throttle response or torque in street applications.
( 12 )
$549.95
$439.96
On Sale
COMP Cams HRT Stage 3 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles engineered to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT Stage 3 cams receive the Micro Surface Enhancement (MSE) finishing process as a standard feature to increase strength and performance by reducing surface peak roughness. This also provides noticeable improvement in the effective load bearing area, thus allowing for much higher loads. Order the model recommended for your vehicle and engine application.
( 1 )
$579.95
—
$605.95
$521.96
—
$545.36
On Sale
COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts unlock a major power upgrade for the 2011+ Ford 5.0L engine. Specifically designed for Coyote V8 applications, these camshafts are counterbalanced and work with phaser limiters to produce optimum, safe power. By taking cutting-edge race technology and applying it to street applications, COMP Cams has engineered these phaser-friendly cams with an exclusive, integrated counterbalance design that ensures a smoother operating valvetrain. They are available for both naturally aspirated and supercharged engines, with three stages available in each series. All cams are "no springs required." Optimized race and street profiles give you power where you need it the most, whether that's maximized midrange power and torque or increased top-end horsepower. Drive with COMP Cams XFI NSR Ford 5.0 Modular 4V camshafts and drive with sophisticated power!
Not Yet Reviewed
$2,013.95
—
$2,046.95
$1,812.56
—
$1,842.26
On Sale
COMP Cams offers HV camshafts for a variety of objectives—such as drivability, towing, greater throttle response, moving peak torque to higher RPM in smaller displacement engines, and more. The cams deliver awesome performance gains (up to +94 hp), as well as increased torque across much of the operating range. They provide a deep rumble and mild, yet noticeable lope. Depending on your vehicle, HV cams are a great choice for engine swaps in full-size cruisers and daily drivers, including heavier vehicles (trucks/SUVs). Order the model recommended for your year/make and engine application.
( 1 )
$541.95
$433.56
—
$487.76
On Sale
Designed for hot street/strip cars, COMP Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these Magnum hydraulic camshafts provide maximum top-end performance for your high performance car.
( 60 )
$291.95
$233.56
On Sale
COMP Cams Nitrous HP retrofit camshafts are designed to work with your nitrous system to get more power from your engine. Their unique intake lobes allow your engine cylinders to fill better, for more complete combustion. Meanwhile, their exhaust lobes are spread to decrease overlap and ensure maximum scavenging of your combustion chamber. The bottom line is an increased power boost from your nitrous system without any loss of throttle response or torque in street applications.
( 5 )
$549.95
$439.96
On Sale
COMP Cams Tri-Power Xtreme camshafts have been designed to work with the FAST-FLASH programmers to optimize torque and horsepower and improve fuel efficiency. They are available for late model, fuel injected, computer-controlled engines. The COMP Cams Tri-Power Xtreme camshafts work with a standard valvetrain, and require no modifications to install.
Not Yet Reviewed
$579.95
$463.96
On Sale
COMP Cams HV NSR Series camshafts are engineered for GM cathedral port LS engines and are drop-in camshaft upgrades designed to provide amazing drivability and throttle response in larger vehicles. These NSR (No Springs Required) cams required minimal tuning and provide increased torque across the entire rpm range with a significant horsepower bump. COMP Cams HV NSR Series camshafts will allow you to get the most out of your daily driver truck, SUV, or 4x4 without sacrificing street manners.
( 1 )
$541.95
$487.76
On Sale
COMP Cams is bringing the musclecar sound back, and it's nastier than ever! Few things grab our attention at a car show or cruise-in like a thumping, high performance idle. In fact, one of the most frequent questions from customers is, "What camshaft will give my car that mean-sounding idle?" For the performance and sound you demand, COMP Cams engineers introduce the Thumpr camshafts—a new series of hydraulic flat tappet cams. The lobe profile and grind characteristics of Thumprs use a combination of early exhaust valve opening, long exhaust duration, and a generous amount of intake and exhaust overlap—to maximize the rough-idling characteristics of the cams. They give you a seriously aggressive exhaust note without negatively impacting the power output or streetability of the engine. Thumpr camshafts are available in several grind profiles; each one will produce a rough, racy exhaust note and impressive amounts of horsepower and torque within a different rpm range.
( 58 )
$341.95
—
$473.95
$273.56
—
$379.16
On Sale
Comp Cams Quiktyme Honda®/Acura® SOHC with VTEC® are engineered to make maximum horsepower and torque from your high-revving Honda®/Acura® engines. These cams feature "all-new" engine-specific cores, not stock regrinds. This means that they won't change your valvetrain geometry (which can reduce, rather than enhance, performance). These new cores are precision-cut and then nitrided to create a super-hard finish that increases lubricity and durability. You get the most possible horsepower from your Honda® or Acura® without sacrificing durability or performance--these cams have it all!
( 1 )
$406.95
$325.56
On Sale
Make some noise with Edelbrock Rollin' Thunder hydraulic roller camshafts. Designed to improve horsepower and torque, they feature more aggressive profiles than conventional flat-tappet hydraulic cams without excessive valve overlap. Recommended for high performance street and strip use, Edelbrock Rollin' Thunder hydraulic roller camshafts work best from 1,500 to 6,500 rpm and are performance matched to Edelbrock Total Power Package components for proven performance. Features Include: * Performance--roller camshafts generate higher lift velocity and faster valve action for increased horsepower and torque gains * Drivability--produces great sounding idle with excellent vacuum at idle * Durability--the smaller surface contact area of roller tappets and their reduced friction, together with stronger camshaft material (hardened steel or iron) ensures longer camshaft life * Environmental--can use ILSAC GF-4 oil, which lowers emissions and does not require zinc or phosphate oil additives * Economy--reduced contact friction between the lifter and camshaft can increase fuel economy for better mileage
( 28 )
$474.95
—
$631.95
$379.96
—
$505.56
On Sale
Release the incredible horsepower and torque hidden inside your vehicle's engine with COMP Cams XFI Xtreme truck camshafts. Available in three different profiles (XFI 260, 261, and 266), they utilize advanced camshaft technology used in fuel injected engines to deliver improved throttle response and better mid and upper rpm power. COMP Cams XFI truck camshafts (for the GM Gen III engines) are compatible with the factory computer systems and wiring, but deliver the best performance when used with upgraded COMP Cams valvetrain equipment, including valve springs, retainers, and locks. Computer tuning is required; use a Fast Flash Cam Tuner Programmer for best results.
( 2 )
$595.95
$536.36
On Sale
The COMP Cams XFI SPR Ford 4.6L/5.4L modular 3V (Springs & Phaser Mods Required) camshafts are the best way to achieve the most power and torque increases possible with the popular Ford Modular 3V engine. These designs are the next step up from the COMP Cams VSR (Valve Springs Required) cams. When compared to the VSR cams, the SPR cams offer additional mid-rpm power increases as well as substantial power gains in the higher rpm ranges. In addition to increases in horsepower, you can also expect another 800-1000 rpm of useable engine speed and an awesome sounding idle lope to match. To achieve this extra level of performance, lobe profiles and timing events were specifically designed to work with the factory variable cam timing (VCT) system cam phasers for all 2005 and newer Ford Modular 3V engines. These cam phasers were modified with the required COMP Cams Cam Phaser Limiter kit to restrict their movement to no more than 20 degrees. This simple modification gains additional piston to valve clearance, allowing for much larger cam designs. This results in cams that not only maintain low and mid-range power, but have incredible high rpm performance as well, all while maintaining the benefits of cam phasing. As noted by the COMP Cams engineering staff during extensive dyno testing, these camshafts provided the biggest power and torque improvements of any cam series they've ever tested in the Ford Modular 3V engine.
( 1 )
$1,028.95
$823.16
On Sale
Ford 4.6L/5.4L modular 3-valve engines found in 2005 and newer Mustangs are all the rage. So the question on everyone's mind becomes, "How can I further improve the performance of these powerful engines?" COMP Cams XFI VSR Modular 3V (Valve Springs Required) Camshafts deliver a great power improvement over stock levels. These cams are the next step up from the COMP Cams NSR (No Springs Required) Cams and represent a major upgrade in power production. When compared to the NSR, stock valve spring compatible cam series, the VSR cams offer a substantial power gain in the higher rpm ranges. To achieve this, a high-lift design that requires a COMP Cams Beehive Valve Spring upgrade was created to maximize power within the limits of the OEM unmodified cam phasers. These new VSR camshafts are available for both naturally aspirated and supercharged engines, with two levels available in each series; one designed for maximizing mid-range power and torque, while the other maximizes top end horsepower. The performance secret behind these camshafts is in the extensive dyno testing that allowed them to determine precise cam timing events. Combining these optimized timing events with a high-lift lobe design offers substantial improvements in both power and throttle response. Designed to work flawlessly with the factory VCT, which is programmed to retard the cam timing above 4500 rpm, the new COMP Cams XFI VSR Ford 4.6L/5.4L Modular 3V Cams optimize both mid and high rpm performance.
Not Yet Reviewed
$1,028.95
$823.16
On Sale
COMP Cams Thumpr NSR hydraulic roller camshafts offer "no springs required" designs for your truck, plus the awesome distinct sound of Thumpr cams. COMP Cams delivers several choices of their NSR hydraulic roller camshafts for a variety of applications—from performance to highly modified. Select the model designed for your vehicle and engine application.
( 5 )
$541.95
$487.76
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
