Availability
Showing In Stock Items. Show All 10 Items.
On Sale
Holley power steering remote reservoirs are ideal for applications that can not fit a pump mounted reservoir. These lightweight aluminum reservoirs have an internal baffle and air separator to keep the fluid from getting foamy or overflowing. Choose from two styles of reservoirs--polished aluminum model for custom and racing applications that you can fabricate a mount for or use clamps for mounting, or black finish model that includes mounting bracket. Features: * Aluminum construction * Dual inlet ports support Hydro-Boost brake systems when used with Earls pump adapters * Port sizes: (2) -8 ORB ports on top (inlets) and (1) -10 ORB port on the bottom (outlet) * Includes fittings: (1) -6 AN Male flare to -8 AN ORB, (1) -10 AN Male flare to -10 AN ORB, and (1) -8 AN port plug * Vented cap allows excess pressure to be released
( 5 )
$178.95
$161.05
On Sale
The APR Suspension Control Unit (SCU) Upgrade directly replaces your factory suspension controller with a new unit that enables advanced control over your vehicle's factory electronic shocks. The factory controller only operates in a "soft" or "stiff" state with no behavior in-between, despite the incredible capability of the factory electronic shocks. This controller has advanced programming that takes various inputs to provide fine-tuned control over the shocks in real time. The controller still retains factory comfort and sport functionally, and it doesn't compromise ride quality for performance. However, both modes rapidly increase performance depending on various inputs—such as acceleration, brake pressure, G-forces, steering angle, speed, and damper shaft velocity. The experience is absolutely transformative. For the casual driver, the vehicle is more comfortable and rides better than stock. Uncomfortable bouncing and stiffness are reduced, and the car settles faster to provide increased stability. This is accomplished by using the full operating range of the electronic shocks to provide a pleasant experience when you're driving normally. But once you begin pushing the vehicle, the controller quickly adapts to provide performance you never knew was possible from the factory shocks. Even on a straight-line launch, the system will help control weight transfer so you can improve your 60 ft. times for better acceleration and better times in the quarter-mile. On a twisty back road, or on a proper track, the controller adjusts each shock individually to provide the grip you need to cut faster lap times with more confidence as the chassis is more balanced. It improves weight transfer on corner turns by allowing a smoother transition, all without the shocks loading the tires, while also reducing overall body roll. Simply put, your vehicle will ride and perform better in every scenario and stays true to our mantra of performance without compromise! Order the Suspension Control Upgrade Unit recommended for your vehicle. Product features: * Direct plug-and-play upgrade * Provides full dynamic control over the electronic shocks in real-time * Optimized ride quality and comfort during normal daily driving * Optimized performance, handling, and cornering during spirited driving * Optimized launch control, traction, grip, and weight transfer * Reduces 60 ft. times for improved acceleration * More confident driving experience * Advanced signal processing provides real-time changes lightning fast speeds * Reacts in real-time to driving style to provide comfort or performance * Retains various factory levels of switchable performance; example: "Comfort" vs "Sport" * Fully 3D-mapped to the capabilities of your factory electronic shocks * Compatible with aftermarket springs, stabilizer bars, and other upgrades * Unit is unlocked and fully upgradable in the future * Unit is completely reversible and removable without a trace
Not Yet Reviewed
$1,399.95
$1,258.95
On Sale
The Ridetech complete coilover suspension system for the 1961-65 Ford Falcon was built front the ground up to bring the Falcon into the 21st century. Ford Falcons are awesome! However, over 60 years have passed since the first Falcon was built—and the OEM 155/13 in. tires just won't cut it in today's world. FRONT: Ridetech started with fitting 225/40-R18 tires (recommended backspace 5.00 in.-5.25 in.) and then built a tubular control arm setup to provide all the correct geometry to get them to work effectively. The steering was also completely updated to provide quick response and virtually no bump steer. To finish off the front suspension, Ridetech fitted a new MuscleBar sway bar that's heavy enough to take on the most aggressive of drivers. This suspension package for the Ford Falcon will absolutely stun you! * Includes new Ridetech spindles (compatible with 1967-69 Camaro brakes) * Optional "Hub" spindles offer the same geometry improvements as the pin spindles, but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-23 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-23 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17 in. wheels. Hubs fit Ford car 5 x 4.5 in. lug pattern and include 14mm studs. * Bump steer reduced to less than 1/16 in. * Mini-Starter required to clear Tru-Turn draglink adapter (not Included) * Complete steering upgrade includes: Draglink (may require mini-starter for clearance), pitman arm (1 in. steering box sector shaft), idler arm, idler arm mount—compatible with manual steering, can be adapted to use Borgeson power steering system * Zero to over 7 degrees of caster possible * 1 1/8 in. solid front sway bar – Rate 608 lbs.-in. * When equipped with 225/40 -R18 tires, standard ride height is 22.75 in. ground to the fender lip * Optional frame brace available to reinforce lower control arm mounts and subframe. Compatible with V8 engine mounts only. REAR: Ridetech chose to fix the rear suspension in much the same way they've done on many muscle cars originally equipped with leaf springs: swap in a 4-link. This rear bolt-on 4-link suspension system completely transforms the little Ford Falcon into a world-class handling machine, and at the same time provides an incredibly smooth ride and bind-free operation. Starting off, the rear will accept up to a 225/40-R18 with a recommended backspace 5.50 in. – 6.00 in. and provide a ride height 18 3/4 in. ground to the fender lip. * Adjustable 4-link bars, including R-Joints * Triangulated 4-link; no need for panhard bar and keeps rear end movement vertical * Bolt-in cradle * Upper control arm axle mounts require welding * Spacers included to fit multiple factory leaf spring mounts (2 in. and 3 in.) * 3 mounting holes for lower control arm at axle: 1 – Top hole: Anti-squat 74.4 percent, Instant Center 72.8 in., Roll Center 12.95 in. 2 – Middle Hole: Anti-Squat 108.1 percent, Instant Center 58.35 in., Roll Center 11.67 in. 3 – Bottom Hole: Anti-Squat 135.5 percent, Instant Center 50.25 in., Roll Center 10.35 in. HQ Coil-Over suspension system for 1961-65 Ford Falcon includes: * Front and rear HQ Series Coil-Overs * Front upper and lower StrongArm tubular control arms * TruTurn system * Front sway bar * Rear 4-link system. * Also fits convertibles!
Not Yet Reviewed
$8,135.00
$7,321.50
On Sale
UMI Performance adjustable lower and double adjustable upper control arms are direct bolt-on replacements designed to minimize wheel hop. UMI Performance double adjustable upper control arms feature on-car adjustability, allowing for quick and easy pinion angle adjustment, and yes, it's as simple as loosening two nuts! The spherical rod end allows for a "bind-free" operation, making them great upgrades for both your track and autocross-driven vehicles. The polyurethane bushings are designed to be bolted to the chassis for quiet, comfortable operation. UMI Performance adjustable lower control arms are constructed from DOM mild steel tubing with a 1.500 in. o.d. x 0.120 in. wall and a 4130 chromoly threaded tube adapter. They are completely CNC-machined and fully TIG-welded for outstanding strength. The lower control arms also feature reinforced spring perches and heavy-duty sway bar mounting points. The upper control arms feature 0.250 in. mild steel mounting points, a 4130 chromoly tube adapter, and a 4140 chromoly heat-treated 1.120 in. solid adjuster--truly overkill. These control arms feature polyurethane bushings, zinc plated steel sleeves, and "on-car" greasable Zerk fittings. Adjustments can be made using the high-quality, PTFE-lined spherical rod ends for quiet, bind-free performance. Additional features include: * QA1 3/4 in. hard chrome plated, PTFE/KEVLAR® self-lubricating race rod end * CNC-machined 6061 aluminum step bushings with zinc plated steel sleeves * Powdercoated finish * Use OEM hardware
( 3 )
$499.99
$449.99
On Sale
UMI Performance single adjustable lower control arms are direct bolt-on replacements designed to minimize wheel hop and improve cornering, while lowering ETs. UMI Performance single adjustable lower control arms are constructed from a DOM mild steel tubing 1.500 in. o.d. x 0.120 in. wall and a 4130 chromoly threaded tube adapter. They are completely CNC-machined and fully TIG-welded for outstanding strength. UMI Performance single adjustable lower control arms feature reinforced spring perches and heavy-duty sway bar mounting points. Their high-quality, PTFE-lined spherical rod end allows for quiet, "bind-free" performance, making them great upgrades for both your track and autocross driven cars. The polyurethane bushings are designed to be bolted to the car chassis for quiet, comfortable operation. The control arms feature polyurethane bushings, zinc plated steel sleeves, and "on-car" greasable Zerk fittings. Additional features include: * QA1 3/4 in. hard chrome plated PTFE/KEVLAR® self-lubricating race rod end * CNC-machined 6061 aluminum step bushings with zinc plated steel sleeves * Powdercoated finish * Use OEM hardware
( 27 )
$209.99
—
$299.99
$188.99
—
$269.99
On Sale
Holley retro-fit hydraulic power steering kits for GM LT4/LT5 engines are here to rescue anyone looking to put an LT4/LT5 crate motor or junkyard motor into their vehicle initially equipped with hydraulic power steering. The design incorporates a splined dual-bearing system that eliminates belt stresses on the P/S pump's internal bearings, assuring long life. Versions of the power steering drives are available for LT4/5 dry-sump and LT4 wet-sump applications. Please order accordingly. Features of Holley retro-fit hydraulic power steering kits include: * Works with your OE accessories and brackets * Supercharger drive maintains the original/optimized belt path and tensioner * Throttle body angle-correcting adapter that better positions the TB for swap applications * Original equipment Type II power steering pump included for OE looks and reliability * Power steering hard line adapters included * Maintains OE pulley ratios for optimal accessory performance * Allows for installation and use of larger supercharger crank pulley (15 percent overdrive or 9.44 in. diameter)
Not Yet Reviewed
$1,399.95
$1,258.95
On Sale
Holley has responded to the expanding late model marketplace by developing the most complete line-up of performance upgrades and engine swap products, including Holley power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps also work with Holley's special reservoir kit.
( 1 )
$549.95
$493.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
