Availability
Showing In Stock Items. Show All 30 Items.
On Sale
The late-model factory power steering pump on the Mopar Gen III Hemi engines has too much pressure for the steering box on most older muscle cars and trucks, so Holley developed a low pressure power steering pump for Gen III Hemi swaps. These special Saginaw Type II low pressure power steering pumps produce the proper pressure, and the 6-rib billet aluminum pulley is sized to operate the pump at the proper speed when used with the existing drive system on Gen III Hemi engines. The special hardline adapter moves the power steering hose connection to a more accessible location for an easy installation and maintenance. Features and benefits: * Low-pressure power steering pump it—use with factory low-pressure steering boxes on muscle cars and trucks with Gen III Hemi engine * Works with factory "car style" accessory drive system and fits 2003-2008 5.7L and 2005-2010 6.1L Gen III Hemi engines * Also fits some 2009-2013 5.7L and 2011-2013 6.4L with 4.34-inch belt spacing * Prevents damage to steering box on older vehicles * Billet aluminum mount with black anodized finish bolts to existing tapped holes on the left side cylinder head of Gen III Hemi engines * 6-rib billet aluminum pulley with black anodized finish sized for proper pump speed * Power steering pump assembly includes a plastic reservoir * Special hardline moves -6 AN hose connection to a more accessible location
( 1 )
$534.95
$480.95
On Sale
Crown Automotive offers thousands of replacement parts for Jeep and Mopar applications, including these steering box mount brackets. Fabricated from steel with a protective black coating, the direct-fit brackets are made in accordance with factory specifications to ensure proper fit, appearance, and long-lasting performance.
Not Yet Reviewed
$15.99
—
$25.99
$14.39
—
$23.39
On Sale
American Iron Off-Road ball joint delete Gen 2 for Jeeps (1990-2017) kits will replace both the upper and lower ball joints on your ride. This second-generation system features a lower cup machined with a recessed flat for increased clearance with axle shafts and RCV setups. The double-ended upper stud accounts for variances between the knuckle and inner C castings, and you can dial-in steering firmness by adjusting torque values on the top Nylock upper and lower assemblies. Enjoy better clearance, an easier installation, and decreased parasitic drag with American Iron Off-Road ball joint delete Gen 2 for Jeeps (1990-2017) kits! More product features and specifications include: * Using two double-ended studs, the hardware is installed in the knuckle with the lower Nylocks fully seated into the tapers and slid onto the inner C casting from below * Adjustable float to accommodate bent C castings and other abnormalities
( 1 )
$639.99
$543.99
On Sale
American Iron Off-Road ball joint delete Dodge AAM kits change the dynamics of the factory configuration, where the uppers and lowers don't rotate on the same axis. In the factory configuration, the lower joint misaligns as it rotates and the upper joint telescopes because it's not really a ball joint, but a greased shank inside a steel sleeve. This system will help stop the endless ball joint replacement cycle and improve the quirky factory steering characteristics. Get rid of the old press-in ball joint headache with the American Iron Off-Road ball joint delete system best suited for your build. More product features and specifications include: * Custom machined press-fit upper and lower cups * Custom 4140 heat-treated hardware with Grade 8 Nylock nuts * PTFE-lined 7/8 in. bearings for smooth operation * 3D-printed plastic dust cap and Viton® seal head to keep debris from tops of each assembly * Open bottom to allow any moisture to evacuate from joint * Customized oversized cups (0.008 in. over) available for axles with enlarged inner C-mount holes from numerous replacements
( 2 )
$714.99
$607.74
On Sale
Superlift dropped pitman arms help to keep your lifted truck in line. They help to reduce bump-steer and some of the additional tie rod angle created by the lift. These steel arms are available for a variety of lifted height applications.
( 40 )
$119.99
$101.99
On Sale
Holley has responded to the expanding late model marketplace by developing the most complete line-up of performance upgrades and engine swap products, including Holley power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps also work with Holley's special reservoir kit.
( 1 )
$549.95
$493.95
On Sale
Steer Smarts Yeti XD tie rod assemblies are a direct bolt-on for any Jeep JK Wrangler. They install in just minutes with no need for modifications. The tie rods are engineered for proper clearance to other components to eliminate interferences. Additional component details: TIE ROD ENDS: * Powdercoat over E-coat for a long-lasting appearance under harsh conditions * External threads are E-coated for durability and long-term serviceability * Forged from medium carbon high-hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength * Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads * Unique "Reverse Pin" technology prevents linkage from flopping or rocking. This technology is built into the socket, unlike the weak external supports on some competitor linkages BALL JOINTS: * 30mm 2 1/2 ton ball joints designed specifically for the JK * Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life. They've been rigorously tested to minimize leakage between grease service intervals, which greatly improves ball joint reliability over our competition * Fully greaseable ADJUSTER SLEEVE: * Tie rod adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength * Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts * Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle * Internal threads and tubes are also E-coated for long-term serviceability
Not Yet Reviewed
$475.00
$403.75
On Sale
Steering systems on 4WD vehicles take a great deal of abuse, whether driving through a snow storm or a rock garden. When the steering gets a bit sloppy, count on Crown Automotive tie rod ends to get your vehicle back on the straight and narrow. Constructed of strong metal materials, these OE-style ends are correctly threaded to match the originals, with a rubber boot to hold in grease. The failure of even one tie rod end can cause a dangerous driving situation. Consider quality replacements from Crown Automotive.
( 20 )
$65.99
—
$151.99
$59.39
—
$136.79
On Sale
Crown Automotive pitman arms convert the angular motion of your drag link and can correct that sloppy steering issue. These are direct-fit parts made from durable steel material, making them perfect replacements for your worn-out steering components.
( 20 )
$24.99
—
$48.99
$22.49
—
$44.09
On Sale
Steering knuckles are the core of a vehicle's front axle. They attach to the suspension components, contain the wheel hub or spindle, hold the front wheel on the car, and let you change direction. Crown Automotive steering knuckles are constructed of cast iron for durability and lasting service. They are available individually or in a set with both left and right replacement knuckles.
( 11 )
$75.99
—
$117.99
$68.39
—
$106.19
On Sale
Spicer Drivetrain Products offers ball joints for a broad range of applications, from the 1970s and up. These OE-style replacements are made from quality materials, and most include mounting nut and cotter pin for installation. Swap out your worn or damaged original ball joints with a new kit from Spicer.
( 100 )
$225.99
$203.39
On Sale
When your vehicle becomes hard to steer, Crown Automotive power steering pumps will make it easier. Power steering is great ... until the pump fails. And, unless you have the arm muscles of a bodybuilder, maneuvering just became a giant hassle. Fortunately, Crown has a great variety of power steering pumps for you to choose from to get your vehicle handling the way it used to.
( 3 )
$101.99
—
$308.99
$91.79
—
$278.09
On Sale
Steering systems on 4WD vehicles take a great deal of abuse, whether driving through a snow storm or a rock garden. When the steering gets a bit sloppy, count on Crown Automotive tie rod ends to get your vehicle back on the straight and narrow. Constructed of strong metal materials, these OE-style ends are correctly threaded to match the originals, with a rubber boot to hold in grease. The failure of even one tie rod end can cause a dangerous driving situation. Consider quality replacements from Crown Automotive.
( 4 )
$5.99
—
$68.99
$5.39
—
$62.09
On Sale
Belltech drop ball joints will lower your Chevrolet Colorado or Canyon 2 in. They replace the stock lower ball joint and relocate the upper position for a true 2 in. drop while correcting the ball joint angle. This will improve handling and maintain the factory ride quality and critical front-end geometry.
( 1 )
$110.00
$99.00
On Sale
Yukon Gear & Axle king pins will get you through your rebuild successfully. Available for hundreds of vehicle and engine applications, king pins are the main pivot in the steering mechanism of a vehicle. These forged steel parts are just a small sample of the quality replacements offered from Yukon. Maintain your axles with the strength of Yukon king pins.
( 5 )
$77.89
$66.21
On Sale
With Crown Automotive steering boxes and steering gear assemblies, you can feel the difference on and off the road. Faulty steering boxes can result in excessive play in your steering wheel. When this occurs, you have a harder time controlling the vehicle. So, whether you're rebuilding, or your car, truck, or Jeep is wandering all over the road, it may be time to replace the steering gear assembly. Available for both power and manual systems, Crown Automotive steering boxes and steering gear assemblies are offered to fit models spanning more than a half-century.
( 6 )
$281.99
—
$658.99
$253.79
—
$593.09
On Sale
Maintain proper suspension and steering by replacing your tired ball joints with a fresh set from Crown Automotive. All ball joints wear down after time. The harder you drive your Jeep, the faster the ball joints will wear. Maybe your Jeep is making a clunking sound or your steering feels tight in spots. You can have confidence in long-lasting dependability and performance with quality replacement parts from Crown.
( 7 )
$6.99
—
$64.99
$6.29
—
$58.49
On Sale
Steer Smarts presents extreme steering linkage--Yeti XD Series linkage for Jeeps. They applied 85 years of steering "lessons learned" to develop the strongest most durable linkage ever built for Jeeps. Yeti XD Pro-Series tie rod assemblies are direct bolt-ons and can be installed in just minutes--no need to modify or alter your Jeep. Features: * Ball joints: -- 30mm 2 1/2 Ton ball joints designed specifically for the specific Jeep -- Cold-headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Tie rod ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long-term serviceability -- Forged from medium carbon high hardenability steel and heat-treated for even greater buckling, impact, and fatigue strength -- Large 1 1/4 in. rolled threads at tie rod adjuster and draglink ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Adjuster sleeve: -- Engineered for proper clearance with chassis components to eliminate interference -- Tie rod adjuster is manufactured from large 1 3/4 in. diameter solid high-strength 7075 aluminum for maximum strength -- Pro-Series adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Hard coated for long term serviceability and durability
Not Yet Reviewed
$599.00
$509.15
On Sale
Fix your power steering leak with Crown Automotive power steering reservoir caps. These direct-fit parts are needed when your caps are cracked and spraying fluid back into your engine compartment. Don't waste any more time or fluid--restore your steering system and stop the noise and play in your steering wheel.
( 1 )
$7.99
—
$14.99
$7.19
—
$13.49
On Sale
Yukon Gear & Axle ball joints are top-quality, reliable small parts to complete your suspension job. They offer individual lower and upper ball joints, as well as kits with upper and lower to service one side of your vehicle.
( 4 )
$115.99
—
$297.99
$98.59
—
$253.29
On Sale
Steer Smarts offers Yeti XD tie rod end replacements to service your drag links. They are available for both the driver and passenger side of your Jeep. Please note: They are not compatible with stock tie rod adjuster sleeve. Features: * 30mm 2 1/2-ton ball joints designed specifically for Jeep JKs * Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage * Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability * Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness * High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability * Fully greaseable
Not Yet Reviewed
$199.00
$169.15
On Sale
Replace your idler arms and sprockets with sturdy steel Crown Automotive idler arms. These components generally wear because of the pivot function built into them. When yours are damaged or malfunctioning, you may notice some signs of road wandering or play in the wheel. Restore smooth, safe handling to your vehicle with OE-style parts from Crown for extended vibration-absorbing performance.
Not Yet Reviewed
$17.99
$16.19
On Sale
Crown Automotive power steering reservoir clips are designed to replace rusted or bent factory originals—or to help easily secure a new reservoir. These clips are made of high-quality material for strength and durability. Crown Automotive offers the largest stock of replacement parts for Jeep vehicles, including select factory-discontinued parts to meet your needs.
Not Yet Reviewed
$11.99
$10.79
On Sale
Your power steering reservoir has been leaking for a while. Crown Automotive power steering pump seals are an easy rebuild to stop those leaks. Over the course of a vehicle's lifetime, it will likely become necessary to replace or rebuild the power steering pump due to fluid loss. Crown has you covered when it comes to their replacement seals.
( 1 )
$5.99
—
$14.99
$5.39
—
$13.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
