Availability
Showing In Stock Items. Show All 16 Items.
On Sale
Hooker LS engine swap transmission crossmembers are built to mount the transmission in place when switching to an LS engine. They are designed using CAD modeling/FEA analysis for optimal fitment, strength, weight, safety, and appearance. The crossmembers are manufactured from high-strength, low-alloy steel and then black powdercoated for maximum durability. They provide an engineered 3 to 3.5 degree engine/transmission inclination angle that is critical to obtaining suitable U-joint working angles. They are designed to be used in conjunction with Hooker LS engine swap brackets to provide a bolt-in installation of Hooker LS swap manifolds, headers, and exhaust systems for this application.
( 42 )
$379.95
—
$399.95
$208.95
—
$247.95
On Sale
Tuff Country EZ-Ride axle pivot brackets are ideal for the Ford owner having trouble aligning a 2.5 in. to 6.0 in. lifted vehicle. These brackets, along with the camber adjustment bolts, will restore the axles to the proper geometry by dropping the driver and passenger side axles, allowing for a precise alignment. The camber bolt allows for a -2.25 to a +2.25 degree camber alignment adjustment.
( 20 )
$146.99
—
$242.99
$132.29
—
$218.69
On Sale
Steer Smarts offers Yeti XD track bars for a variety of applications. They're fully adjustable on the vehicle and are designed to be the strongest track bar available. Available for front or rear, in black or red. Additional details: * Easy bolt-on installation * Works on stock height (no lift) up to a 6.5 in. lift * E-coated and powdercoated for a long-lasting appearance under harsh conditions * Engineered for proper clearance to other chassis components to eliminate interferences * Forged from 2 in. steel for greater buckling, impact, and fatigue strength * Designed to correct track bar geometry * Includes all necessary installation hardware
Not Yet Reviewed
$349.00
—
$399.00
$279.20
—
$319.20
On Sale
Hurst transmission crossmembers are designed and fabricated from thick steel plate and heavy-gauge steel tubing for a perfect fit and finish. These bolt-in units are much stronger than the factory stock crossmembers and help maintain the correct transmission and driveshaft angles. Precision-cut and fully MIG-welded, they are given a durable black powdercoat finish to last a lifetime and give you peace of mind knowing you are buying the best for your transmission conversion. Trust the company that originally started out making conversion mounts back in 1958, Hurst Performance.
( 7 )
$377.95
—
$473.95
$207.95
—
$260.95
On Sale
Hooker Blackheart transmission crossmembers provide easy installation for a variety of engine and transmission swap combinations. Manufactured from steel with a black powdercoat, these crossmembers are designed to be used with Blackheart engine adapter plates for a trouble-free LS, LT, Hemi, Coyote, etc. engine swap. Order the model recommended for your vehicle. Blackheart crossmember features: * Comprehensively designed as an integral part of the complete Hooker swap system, providing maximum level of inter-component compatibility * Designed specifically for use with Hooker engine adapter plates * High-arch exhaust passages provide maximum available exhaust ground clearance * Design geometry replicates stock drivetrain height, inclination angle, and offset for optimized vehicle and component compatibility * High-strength/low alloy steel construction provides desirable balance of strength, stiffness, weight, and cost * Powdercoat finish provides attractive, corrosion-resistant appearance * Provide bolt-in compatibility with Hooker/Holley engine mounts, swap headers, exhaust systems, and oil pans * Hardware included
( 27 )
$285.95
—
$418.95
$164.95
—
$272.95
On Sale
Steer Smarts Yeti XD top mount drag links for a high-steer or drilled-out OE knuckle was designed to be a complete bolt-on for Jeep JKs that have already been modified for a flipped draglink. They install in just minutes and bolt to a sleeved factory knuckle or high-steer knuckle hole and the factory pitman arm hole. Features: * Yeti XD assembly: -- Easy bolt-on installation -- Engineered for proper clearance with chassis components, eliminating interferences * Ball joints: -- 30mm 2 1/2-ton ball joints designed specifically for Jeep JKs -- Cold headed medium carbon alloy steel ball studs provide incredible impact toughness for extreme duty usage -- Induction heat-treated ball studs provide ultimate fatigue strength and superior off-road durability -- Steel-on-steel bearings provide exceptional ball joint wear resistance and robustness -- High-quality seals ensure long ball joint life and are rigorously tested to minimize leakage between grease service intervals, improving ball joint reliability -- Fully greaseable * Drag link ends: -- Powdercoat over e-coat for a long-lasting appearance under harsh conditions -- External threads are e-coated for durability and long term serviceability -- Forged from medium carbon high-hardened steel and heat-treated for even greater buckling, impact, and fatigue strength. -- Large 1 1/4 in. rolled threads at tie rod adjuster and drag link ends provide significantly increased strength over the original equipment threads -- Unique "reverse pin" technology built into the socket prevents linkage from flopping or rocking * Adjuster tube: -- Drag link adjuster is manufactured from large diameter 1/4 in. thick wall high-strength 4130 chromoly steel tubing for maximum buckling strength -- Adjuster clamps ensure proper clamp force using conventional tools without the possible risk of loosening like large jam nuts -- Designed with right-hand and left-hand threads for quick and easy adjustment when installed on the vehicle -- Internal threads and tube are also e-coated for long term serviceability
Not Yet Reviewed
$475.00
$380.00
On Sale
When certain vehicles are lifted, their stock front shackle crossmember requires replacement. These transmission crossmembers by Tough Country replace the stock crossmember for proper suspension.
Not Yet Reviewed
$42.99
$38.69
On Sale
Upgrade your tunnel brace to improve rigidity and increase clearance to fit larger exhaust systems. Factory stamped steel tunnel braces unfortunately leave much to be desired. APR has redesigned these 6061 aluminum braces to sit slightly lower in the tunnel to allow for larger exhaust tubing. As an added benefit, the CNC-bent laser-cut braces add additional structural rigidity to the chassis! Tunnel brace model EXH0321 fits C7 chassis A6/7, S6/7, RS6/7.
Not Yet Reviewed
$109.95
$60.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
