Availability
Showing In Stock Items. Show All 53 Items.
On Sale
Holley has responded to the expanding LS marketplace by developing the most complete line-up of LS performance upgrades and engine swap products, including Holley LS engine power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low LS accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps will also work with Holley's special LS reservoir kit.
( 8 )
$390.95
—
$449.95
$292.95
—
$351.85
On Sale
Superlift dual steering stabilizer kits are essentially shock absorbers for your steering system. They allow unrestricted gradual movement, but resist sudden shock, improving driver comfort and steering ability. These damper kits include two cylinders and mounting hardware for vehicles that are not factory equipped with a stabilizer. They're great for rigs that see extreme duty or have extra-large tires. Numerous models are available, with specific fitment requirements. Click the product application tabs to find the steering damper best suited for your truck or SUV.
( 13 )
$399.99
—
$649.99
$339.99
—
$552.49
On Sale
Crown Automotive steering kits remain an affordable way to eliminate slack in your old OE linkage. Each kit includes tie rod ends, adjusters, and mounting hardware, as well as a steering stabilizer. Crown steering assemblies are engineered to exactly match the factory design, so they're guaranteed to bolt in place of your original linkage without any hang-ups. Order the kit tailored for fitment on your vehicle.
( 11 )
$318.99
$287.09
On Sale
Trail-Gear Samurai high steer kits are specifically engineered to work with stock Samurai axles--and they're a must-have for a "spring over axle" setup. They include solid-forged 8620 steel steering arms, a heavy-duty 1 1/4 in. x .250 in. wall DOM drag link and tie rod, FJ80 tie rod ends, and all necessary hardware. There's even a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm. As with all Trail-Gear products, installation is easy, and these high steer kits fit all Suzuki Samurai engines.
( 4 )
$599.99
$509.99
On Sale
Low Range Off-Road steering knuckle rebuild kits contain the replacement parts needed to successfully service steering knuckles. Available for a variety of makes, models, and axles, LROR has chosen the best quality components and does not sacrifice quality for price. While competitors' kits may include only the bare essentials, Low Range Off-Road includes the parts often missing from other kits. Their Ultimate knuckle rebuild kits include upgraded seals, high-quality Koyo bearings, and more. LROR even includes the specialty tools needed to complete the job. Simply put, they are the best, most complete knuckle rebuild kits available. One kit covers both sides of the axle and most kits are available with or without wheel bearings. Low Range Off-Road knuckle rebuild kits typically include (varies by application): * Gaskets * Inner axle seals * Bearing seals * Knuckle seals * Hub seals * Trunnion (kingpin) bearings * Backing plates or backing plate eliminators * Spindle bushings * Spindle nuts and washers * Trunnion shims * Steel outer felt covers—not found in most other kits * Hub dial O-rings Notes: * Since they're not included in all kits, wheel bearings and spindle bushings should be checked when rebuilding the axle. * Some kits may contain Timken or Schaeffler/FAG bearings when Koyo bearings are not available. * Hub gaskets are sold separately for some applications.
Not Yet Reviewed
$453.88
$385.80
On Sale
Superlift's award-winning steering system is available for all vehicle models equipped with Ford's Twin Traction Beam (TTB) suspension. It consists of a centerlink, an idler arm and mounting bracket, and two tie rod assemblies. The system is compatible with most name brand 4 in. to 6 in. lift kits. The vehicle must be lifted no less than 3.5 in. and no more than 6 in.—plus be equipped with a Superlift brand dropped pitman arm (purchased separately). This Superunner Steering Conversion kit works with Superlift Suspension lift kits associated with Ford applications. Fords with TTB suspension are known for their somewhat vague steering feel. On off-camber or less-than-ideal driving surfaces, continuous corrective steering input is required to keep the vehicle pointed straight. When the vehicle is raised, these inherent tendencies are magnified. To correct this concern, you must: (1) minimize tie rod angles, and (2) improve steering tie rod-to-axle beam "phasing" ... the tie rods' arc of movement should better match the axle beams' arc of movement. These two factors greatly impact drivability. When this geometry is askew, the vehicle experiences excessive toe-in/toe-out variations as the suspension travels, resulting in the Ford TTB version of bump-steer. Superlift offers two methods to improve steering traits. Their dropped pitman arm reduces some of the additional steering linkage angle created by increased ride height. The pitman arm, used with a Superunner Steering System, further reduces tie rod angles. The new tie rod assemblies, more proportional in length to the axle beams, improve phasing. On most lifted Fords, installing a Superlift dropped pitman arm alone will result in satisfactory steering characteristics. The dropped arm, used in conjunction with their Superunner Steering System, delivers optimum steering traits.
( 1 )
$499.99
$424.99
On Sale
Scott Drake's V6 to V8 conversion kits include everything you need in one kit to help you to convert your 6-cylinder steering system on your Mustang to the stronger V8 manual steering system. Along with Scott Drake spindles, these conversion kits include the center link, tie rods, adjusting sleeves, pitman arm, idler arm and idler arm bracket. Bring your V6 equipped Mustang up to the Mustang GT specs using these convenient conversion kits—your classic Mustang will be much more fun to drive!
Not Yet Reviewed
$463.95
$416.95
On Sale
Truck owners are very impressed by the lineup of Trail-Gear Rock Assault Ram steering assist kits. For example, the Toyota kits feature a selection of various-sized stroke hydraulic rams--with high-temperature inner and outer seals for long life and no leaks. Each ram includes a 3/4 in. rod that's a full 50 percent stronger than other rods on the market. The specially formed 1/4 in. heavy-duty plate steel brackets make installation a snap. Here are the parts included in most Trail-Gear Rock Assault Ram steering assist kits: * Ram with high-temperature inner and outer seals * Rod ends with jam nut * Ram bracket for axle housing * Ram bracket for tie rod * Two hoses * Two JIC 90 degree elbows * Two 1/4 in. NPT x #6 JIC steering box fittings * Mounting hardware * Instructions with photos These kits do require: * Trail-Gear High Steer crossover steering with 1.25 in. tie rod * Tapped steering box
( 3 )
$449.99
$382.49
On Sale
Most steering boxes are worn out after 45 plus years of service and are not rebuildable. Scott Drake quick-ratio steering boxes upgrade your classic's steering with an improved ratio for a more responsive, precise, and smoother steering system. These boxes eliminate steering wheel issues including play, hesitation, and wandering, along with improving high-speed tracking and overall sense of control. Scott Drake quick-ratio steering boxes feature a quick 16:1 ratio--the same ratio used on high performance Mustangs--and an improved needle bearing design for smoother operation. For an easy, no-hassle, stock replacement install of your old, worn-out box, Scott Drake quick-ratio steering boxes deliver a bolt-in design that requires no modifications or core charge to hassle with, a 1-year warranty, and improved performance.
( 3 )
$499.95
$448.95
On Sale
Trail-Gear solid axle steering kits support your determination to put together your own SAS kit to lift your first-generation Tacoma. How, you ask? When you have trouble finding the right parts to link your steering to an IFS steering box, you know the answer--Trail-Gear. These TG solid axle kits utilize the same steering parts from their own SAS kits to take the guesswork out of making your own steering linkage. You'll receive an adjustable-length double-D steering shaft, a firewall plate, a steering shaft seal, and U-joints for both ends of the shaft. Trail-Gear is ready to lend a hand with their solid axle steering kits.
Not Yet Reviewed
$379.99
$322.99
On Sale
Trail-Gear heavy-duty steering kits solve feedback issues caused through the stock steering setup. Bigger tires and a lifted suspension are necessities for off-roading today—unfortunately, the combination can cause problems. TG kits will reduce steering vibrations, so you can enjoy a more comfortable driving experience. They offer kits for multiple applications that will strengthen your setup for more assurance on the trails. Trail-Gear steering kits include right and left-hand thread heavy-duty FJ80 tie rod ends, drag link, and hardware. The tie rods and drag link are made from hefty 1/4 in. thick wall DOM tubing. Your choice of kit may also include steering stabilizer with 9 in. stroke and hardware, or a hard-to-find 1:10 taper reamer for reaming out your stock pitman arm and steering arms.
Not Yet Reviewed
$299.99
—
$399.99
$254.99
—
$339.99
On Sale
Holley has responded to the expanding late model marketplace by developing the most complete line-up of performance upgrades and engine swap products, including Holley power steering pumps. They are available in two versions: cast iron Saginaw Type II pumps with reservoirs for use on low accessory drives; or Corvette-style lightweight aluminum pumps (also known as Saginaw TC type pumps) for use with Holley driver's side brackets. The aluminum pumps also work with Holley's special reservoir kit.
( 1 )
$549.95
$493.95
On Sale
The late-model factory power steering pump on the Mopar Gen III Hemi engines has too much pressure for the steering box on most older muscle cars and trucks, so Holley developed a low pressure power steering pump for Gen III Hemi swaps. These special Saginaw Type II low pressure power steering pumps produce the proper pressure, and the 6-rib billet aluminum pulley is sized to operate the pump at the proper speed when used with the existing drive system on Gen III Hemi engines. The special hardline adapter moves the power steering hose connection to a more accessible location for an easy installation and maintenance. Features and benefits: * Low-pressure power steering pump it—use with factory low-pressure steering boxes on muscle cars and trucks with Gen III Hemi engine * Works with factory "car style" accessory drive system and fits 2003-2008 5.7L and 2005-2010 6.1L Gen III Hemi engines * Also fits some 2009-2013 5.7L and 2011-2013 6.4L with 4.34-inch belt spacing * Prevents damage to steering box on older vehicles * Billet aluminum mount with black anodized finish bolts to existing tapped holes on the left side cylinder head of Gen III Hemi engines * 6-rib billet aluminum pulley with black anodized finish sized for proper pump speed * Power steering pump assembly includes a plastic reservoir * Special hardline moves -6 AN hose connection to a more accessible location
( 1 )
$534.95
$480.95
On Sale
With Crown Automotive steering boxes and steering gear assemblies, you can feel the difference on and off the road. Faulty steering boxes can result in excessive play in your steering wheel. When this occurs, you have a harder time controlling the vehicle. So, whether you're rebuilding, or your car, truck, or Jeep is wandering all over the road, it may be time to replace the steering gear assembly. Available for both power and manual systems, Crown Automotive steering boxes and steering gear assemblies are offered to fit models spanning more than a half-century.
( 6 )
$281.99
—
$565.99
$253.79
—
$509.39
On Sale
A major common weak point on Chevrolet/GM HD series trucks is the steering linkage and tie rods—with high-torque engines, lift kits, and larger tires putting greater strains on the steering system than what OEM intended. Common failures include loose steering, front wheels toe-in under load while in 4WD, and broken tie rods. If you have performance upgrades in your truck, lifted it or do serious towing, it's time for a steering upgrade kit from BD Diesel. In kit P/N 1032150, the forged I-Beam centerlink is 30 percent stronger than OEM, which reduces flex in the steering system and creates a strong base for the tie rods to be attached to. The tie rods are 1.5x thicker than OEM for reduced flex and have larger inner ball joints for reduced wear. Testing has shown the BD tie rods can take over double the amount of force that OEM rods can handle. Greaseable ball joints come with sintered bearings and allow for better load holding and increased life. Longer, high-strength through-bolt designed sway bar end links are included to accommodate larger tie rods and leveling kits. Polyurethane bushings have OEM-style shaping for articulation and durability. The entire kit retains factory geometry for accurate steering and will allow for any OEM replacement parts to drop-in without any geometry sacrifice or modification required. Other upgrade kit designs change the geometry of the steering, which can sacrifice safety and drivability for straight line strength while pulling or racing. This can also create a dangerous "bump steer" where the vehicle becomes uncontrollable on uneven roads. By not altering the steering geometry, the BD upgrade kit saves you from this problem. The total package is an economic upgrade for worn-out steering and will increase the durability, longevity, and dependability of your truck—while saving money by preventing catastrophic repairs. See if there's a steering upgrade kit that's compatible with your vehicle.
Not Yet Reviewed
$525.95
$473.36
On Sale
Providing improved power steering for off-roading, Trail-Gear power steering pumps replace your stock models with high-performance reliability. Their TC-style pumps are built to handle extreme heat, with each one receiving a bench test to ensure quality. They are available in two styles -with or without an anodized aluminum pulley. When you are on the road, stock is okay--but for off-road, you need trail-tested gear. Order the Trail-Gear power steering pumps best suited for your application.
( 6 )
$399.99
$339.99
On Sale
Building a fully hydraulic steering system can be quite a project. Thankfully, Trail-Gear has taken all of the guesswork out of the process with these complete, user-friendly hydraulic steering kits! Everything you will need is included, such as mounting brackets specifically designed for Toyota apps. The steering pump has an all-steel housing and emits 4.5 gpm of flow and 1,650 psi of pressure. Each high-pressure hose is steel-braided with crimped-on ends. These kits are available in 6, 8, and 10 in. ram sizes, and are ideal for use with links and most leaf spring applications. Kits include: * 6, 8, or 10 in. double-ended ram and clevis kit * Orbital (100 ml, 125 ml, or 160 ml) * Full hydraulic steering pump with pulley * Tie rod kit * Double-ended ram mounting kit * Steering column * Orbital mounting kit * Reservoir with filter * Cooler * Power steering belt * Complete hose kit * All necessary hardware
( 4 )
$449.99
$382.49
On Sale
Low Range Off-Road Align-Correct HD crossover steering kits will make your tires avoid slipping while following the path of a turn. The kits are offered in 3 levels: Full kit, Stage 1, and Stage 2 add-on kit. It's time to improve your steering with the strength and reliability of LROR Align-Correct HD crossover steering kits. Full kits include: * Steel steering arm * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty drag link, full 1/4 in. wall DOM tubing * Heavy-duty tie rod, full 1/4 in. wall DOM tubing * High Speed Steel (HSS) tie rod taper reamer * Class 8.8 metric bolts and washers Stage 1 kits include: * Steel steering arm * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty drag link, full 1/4 in. wall DOM tubing * High Speed Steel (HSS) tie rod taper reamer * Class 8.8 metric bolts and washers Stage 2 add-on kits include: * Heavy-duty Toyota FJ80 Land Cruiser tie rod ends with jam nuts and cotter pins * Heavy-duty tie rod, full 1/4 in. wall DOM tubing
Not Yet Reviewed
$433.25
$368.26
On Sale
Trail-Gear high steer crossover steering kits get you have you crawling over the rocks in no time. Stock steering just can't do the job like flexible crossover steering. TG high steer kits outfit your rig with the unbeatable quality of super beefy, solid forged steering arms, a heavy-duty pitman arm, rod ends, and durable .250 in. wall steering rods. They offer a precision fit for easy assembly and are available with flat arm or drop pitman arm, and 4-stud or 6-stud setups. Is your steering wheel on the right? TG also offers a right hand drive! If you're tired of broken stock steering arms, make the switch to Trail-Gear high steer crossover kits.
( 1 )
$549.99
$467.49
On Sale
To everything, turn, turn, turn ... if your power steering is no longer turning smoothly and easily, Scott Drake has control valves to return your steering control to minimum force for operation, the way it should be. These control valves are built from all-new components to ensure you years of continued driving pleasure. Your power steering will feel even tighter than the original, as these new valves will transfer the correct amount of fluid for even road feel and easy turning. Order the model recommended for your vehicle.
( 6 )
$415.95
$373.95
On Sale
Trail-Gear steering control valves function as orbital load reactive valves. These valves sense external forces placed on the system via the ram and react to them. If your steering and axle calculations are correct, the wheels will return to center. The ram you use with your orbital will determine the number of turns it takes to get from lock to lock.
( 1 )
$599.99
$509.99
On Sale
Trail-Gear Toyota high steer kits feature unbeatable quality at an attractive price. Crossover steering is critical for rock crawling. The stock steering just can't keep pace with today's super-flexible suspension systems. This results in broken stock steering arms and loss of steering. These kits include super-beefy, solid forged steering arms, a heavy-duty pitman arm, heavy-duty 0.250 in. wall steering rods, and rod ends. The kits are precision-fit for easy assembly.
( 3 )
$549.99
$467.49
On Sale
Clearance is the key word for off-road enthusiasts. Navigating rocks and rugged terrain leaves your thin steering mechanism vulnerable to damage--which makes Trail-Gear high steer arms invaluable to your vehicle. These pressure-forged steel brackets provide solid mounting points to raise your pitman arm and steering rods a few more inches off the ground. This additional height can mean the difference between safe adventures … or a bent and useless steering component. Trail-Gear steer arms feature tapered tie rod holes for secure contact between parts, and they compensate for angles so your rod ends can ride at the OE-standard 90 degrees. For trucks, 4Runners, Land Cruisers, and other solid front axle rides, TG high steer arms are essential equipment when you venture off the beaten path.
( 3 )
$299.99
—
$349.99
$254.99
—
$297.49
On Sale
RSO Suspension's steering stabilizers are engineered to suit every individual, designed to provide you with a smooth and customizable steering feel. Large steel body with external reservoir allows more oil to be used reducing heat and fade from extended use. The machined aluminum reservoir mount and clamps increase strength while reducing weight. Black anodized aluminum components and black powdercoated steel body offer the highest corrosion protection in any weather condition. With a through shaft design, you will no longer feel any of the push/pull feeling from traditional factory stabilizers. These components are fully rebuildable and serviceable to offer years of problem free performance. Select the RSO steering stabilizer model designed for your application. Product features and details: * Machined aluminum and steel components are utilized for tight tolerances while increasing strength and reducing weight * Tough black powdercoated steel body and black anodized aluminum reservoir mount and clamp offer the highest protection against corrosion * Large 2 in. steel body with external reservoir increases oil capacity reducing heat and heat induced performance fade * Billet tie rod clamp, rotating shaft and clockable reservoir position allows mounting in a position away from other suspension components adding clearance and preventing damage * Through shaft is constructed from 5/8 in. thick chrome plated steel, and machined spacers and bearings give you ultimate performance for years to come * Premium 5W shock oil, larger oil capacity and 9 levels of adjustment and 110 degrees of steering allow you to dial in your steering feedback * Free rotating shaft, clamp and clockable reservoir allow mounting options away from suspension components to add clearance and prevent damage * Fully rebuildable and serviceable for years of problem free performance backed by a 1-year manufacturer warranty on workmanship and structure, 1-year warranty on the components and finish
( 1 )
$308.99
$278.09
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
