Availability
On Sale
Stock intake manifolds in electronic fuel injection vehicles often fall short of lasting for the life of the vehicle. Being molded from polymers they tend to warp or crack and start leaking vacuum or coolant over the years. Summit Racing™ Premium EFI intakes are just what you need when it's time to replace your manifold as our design improvements address the failures that occur with existing manifolds for this application on the market today. These units are made to fit your specific vehicle and come complete with the necessary hardware for an easy OE type installation. Make this the last manifold you ever buy for your car or truck. Check out these features and benefits below: • Made in USA by OE Tier 1 Supplier • Aluminum crossover design improvement to mount direct to the cylinder head eliminating coolant exposure and eventual failure at the plastic interface of existing manifolds on the market. • High grade coolant resistant material used in coolant fitting and block out locations to coolant system. All coolant exposure areas are addressed with appropriate material. • Heat staked inserts for coil mounting. • Includes alternator brackets, throttle body adapter (application specific), thermostat, gaskets or O-ring seals, and mounting hardware.
( 45 )
$204.99
—
$379.99
$199.99
—
$339.99
On Sale
Blue electric fuel pumps from Holley feature an improved design for street and strip applications, a new lower housing casting for enhanced fuel flow, and a tumble-polished billet look with the distinctive blue logo. These pumps have a 110 gph flow rate, draw only 3 amps, and have a maximum pressure of 14 psi. They weigh only 3 lbs., and include a mounting bracket.
( 303 )
$239.95
$179.95
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 348 )
$138.95
—
$230.95
$104.95
—
$150.95
On Sale
We want you to have reusable filter elements that outflow ordinary paper filters, without spending an arm and a leg. Summit Racing™ reusable air filter elements utilize quality materials and have oil already applied. They're available in dozens of sizes, shapes, and styles—and are a terrific value.
( 228 )
$50.99
—
$57.99
$39.99
—
$50.99
On Sale
Summit Racing™ fuel pump and regulator Pro Packs consist of proven performance fuel pumps and regulators. Just select your brand, flow rate, and pressure requirements, and one part number gets you everything. We've even included a relay kit with the electric fuel pump combos. Economical and convenient, Pro Packs are available for virtually any application from the 1950s and up.
( 60 )
$271.94
—
$280.90
$200.90
—
$211.94
On Sale
Get more horsepower, better acceleration, and some extra cash in your pocket with a Summit Racing™ fuel injection performance kit. Most fuel injection performance kits feature a molded polyethylene intake tube that's designed to pull in more power-building cool air, and they come with a washable, reusable air filter that'll last the life of your vehicle. Best of all, Summit Racing™ fuel injection performance kits bolt on in place of your stock air box, so installation is easy.
( 94 )
$279.99
$251.99
On Sale
A properly fabricated intake manifold can produce significant gains in your engine's performance. Add one of our Summit Racing™ fabricated intake manifolds to your engine combination to make more power! Each of these stock/OEM deck engine block style intake manifolds is manufactured to exacting standards utilizing the latest CNC machining and fabricating equipment. Simply find and order a perfect fit for your specific make and model vehicle.
( 31 )
$349.99
—
$469.99
$249.99
—
$369.99
On Sale
Bolt a carburetor onto your LS engine using Holley LS mid-rise carbureted intake manifolds. These intake manifolds work on all GM LS, Gen III, or Gen IV engines equipped with rectangular or cathedral port cylinder heads. Available in a single or dual plane design, these manifolds use an O-ring cylinder head mounting flange to provide an OEM seal and make installation a snap. You'll also receive mounting bolts, washers, and pipe plugs for the manifold vacuum and MAP sensor ports.
( 46 )
$415.95
—
$573.95
$302.95
—
$315.95
On Sale
Weiand high-rise/dual-plane Speed Warrior intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrel carburetors and make power from 1,500 to 6,700 rpm. That makes Weiand Speed Warrior intake manifolds the perfect choice for your street/strip vehicle. To make more power you have to get more air to your engine. Look to Weiand as your power source! Features include: * Permanent mold castings * Precision CNC-machined * Available with exhaust crossover for improved street drivability * Also available with isolated runners to reduce intake charge heating * Available finishes: as cast; polished; black ceramic coating; Everbright * Offered for standard small block Chevy heads, non-EGR 262 c.i.d. to 400 c.i.d. heads, and Vortec (L31) or non-Vortec heads
( 51 )
$299.95
$224.95
On Sale
PRW Q-Jet carburetors are manufactured with all new components. They are a significant upgrade to stock GM carburetors for most GM automotive applications. Every carburetor is designed with precision engineering and cutting-edge features and are equipped with PRW's industry first lean/rich adjustment allowing 15% +/- main circuit adjustment to allow for precise tuning with ease. They are available in 750 cfm for GM cars and trucks with engine sizes ranging from 283-350 cu. in. and 800 cfm for GM vehicles with engine sizes ranging from 350-455 cu. in.—both applications work well with a mild cam or headers for optimum street performance. Choose the PRW Q-Jet carburetor designed for your application needs. Key features: * All new—not rebuilt, or remanufactured * Available for 750 and 800 cfm applications * Industry first Lean/Rich adjustment allowing up to 15% +/- main circuit adjustment to allow for precise tuning with ease * Universal replacement for most GM automotive applications * Includes most required vacuum ports * Complete with a one-wire electric choke * Locally assembled and run-tested, with all gaskets, metering rods, jets and air bleeds made in the USA * Compatible with "C" and "U" style throttle linkages suitable for stock intake manifolds
Not Yet Reviewed
$699.89
$499.95
On Sale
Fluidyne heat exchangers and intercoolers are designed to keep your turbocharged or supercharged engine working at optimum levels. A cooler intake charge means more power from your engine. These units are made from aluminum and precision-welded for maximum efficiency and durability. The coolers use mounting tabs welded to the outer case for a simple installation. Order the size or model recommended for your application.
( 9 )
$467.00
—
$1,054.00
$396.95
—
$948.60
On Sale
Mr. Gasket micro electronic fuel pumps are compatible with gasoline, alcohol, diesel, and E85 fuels and additives (depending on the model). They feature solid-state, worry-free electronics and eliminate vapor lock and flooding. Great as stand-alone or booster pumps, the micro units are self-priming and have a simple 2-wire design. They work with 12 V negative-ground systems and include mounting hardware. Mr. Gasket micro electronic fuel pumps will supply adequate fuel, time and time again.
( 79 )
$63.79
—
$111.95
$47.84
—
$61.95
On Sale
Weiand Action Plus intake manifolds are designed for use as stock replacements, with improved power and torque characteristics. They're 180 degree, dual plane types, with a carburetor flange that'll accept either stock or aftermarket performance carburetors. Their effective rpm range runs from idle to 6,000 rpm. With their high-flow runner design and ability to produce increased power with little modification, it's no wonder these manifolds are so popular.
( 63 )
$412.95
$268.95
On Sale
Mr. Gasket utility jugs are made from high-quality materials and include a heavy-duty cap. Each jug features a main handle and bottom grip pocket for easy pouring as well as graduated markings for precise pours. The caps feature a removable plug and rubber seal to allow the jug to be used with or without the filler hose.
( 110 )
$37.95
$24.67
On Sale
Our Summit Racing™ cast aluminum intakes are the perfect performance upgrades for your engine. The dual plane carbureted manifolds feature a runner design to deliver improved power. They're available in a variety of sizes, RPM ranges, and finishes. Order the model recommended for your vehicle application.
( 48 )
$328.99
—
$340.99
$228.99
—
$240.99
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$439.95
—
$466.95
$285.95
—
$303.95
On Sale
These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.
( 50 )
$162.95
$105.95
On Sale
The Holley EFI CAN Input/Output Module kit can be added to Holley EFI HP, Dominator, Terminator X and Terminator X Max EFI installation. This CAN module will add eight inputs and eight outputs to the system, which can be used to control additional accessories or provide critical sensor inputs. This module is perfect for anyone wanting to enhance the capabilities of their current ECU, yet have already tapped out their ECU's Input/Output channels. Product features: * Quickly expand your HP/Terminator X or even Dominator ECU's Input/Output control with 8 additional inputs and outputs * This module is perfect for anyone wanting their Holley EFI ECU to control more functions or monitor more data channels * HP and Terminator X EFI installations with only 4 inputs and 4 outputs can now add more functionality to their EFI system * The 554-165 kits contain a pre-terminated CAN harness, allowing you to quickly install the Holley EFI CAN Module to any existing Holley EFI installation * Pre-terminated flying leads makes installing new wires a breeze * Inputs can be used for things such as: - Switch 12 V toggle switches; can be configured for external mechanical relays, or setup as digital switches via a Holley EFI dash - Ground input for brake pedal switch - 5 V analog inputs for sensors like fuel pressure, oil pressure, or nitrous bottle pressure - Thermistor inputs for coolant temperature sensors * Outputs can be used for things such as: - Switch Low (ground); for relay control or activation - Switch Low PWM (ground); PWM fan control, PWM fuel pump control, or other PWM-controlled devices * Adjustable broadcast rate for each channel: from 0-100hz
( 3 )
$399.95
$259.95
On Sale
Do you want a better fuel pump option? Mr. Gasket meets your fuel needs with high performance electric fuel pumps. These reliable, lightweight fuel pumps are 100 percent pressure-tested for high-flow applications. Mr. Gasket high performance electric pumps are universal inline-style rotor/vane fuel pumps that are compatible with all carbureted engines and feature 3/8 in. inlet/outlet connections. The pumps are available with or without a regulator. Options are good. Get a better fuel pump at a better price with Mr. Gasket high performance electric fuel pumps.
( 17 )
$154.95
—
$211.95
$100.95
—
$137.95
On Sale
Earl's Performance inline fuel filters are designed for use as pre-filters to provide maximum protection for fuel systems. They're available with your choice of an 85 micron screen-type element or a 35 micron sintered bronze element. Either style can be easily disassembled for inspection and cleaning. The filter housings are available in a wide range of male AN fitting sizes for use with Earl's high performance fuel lines and fittings. Also available with hose barb ends (bronze element only), they have a fuel flow of 4 to 5 gpm and come with an anodized finish in a choice of colors. Replacement sintered bronze filter elements also sold separately.
( 100 )
$106.95
$69.95
On Sale
Holley 351W Ford Hi-Ram EFI intake manifolds are designed for your high performance engine. The modular design of these manifolds offers a runner length and a tapered cross-section layout that works for a wide range of engine configurations. The included fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. Build maximum performance with 351W Hi-Ram EFI intake manifolds from Holley.
( 4 )
$1,349.95
$742.95
—
$877.95
On Sale
Holley Dominator billet fuel filters are precision CNC-machined from 6061-T6 billet aluminum for maximum strength and durability. They feature a black bright dip anodized body and clear bright dip anodized ends for superior corrosion resistance and good looks. Holley Dominator billet fuel filters flow an outstanding 260 gph, have -12 AN O-ring connections, and come available in your choice of 10, 40, or 100 micron ratings.
( 8 )
$154.95
$100.95
On Sale
Summit Racing™ high-flow in-tank electric fuel pumps provide high volumes of fuel flow and performance you can count on! Summit Racing™ high-flow in-tank fuel pumps are ideal for use in high performance, naturally aspirated, and forced-induction EFI applications.
( 5 )
$119.99
$99.99
On Sale
Holley HP billet fuel filter replacement elements are for use with your Holley HP billet fuel filter. They're available in your choice of a 10-micron depth media element or 40-micron and 100-micron stainless steel woven mesh elements. Ensure that your fuel filter is preventing contaminants from entering the engine. Update your old unit with a quality replacement element from Holley.
( 13 )
$23.79
$15.46
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
