Availability
On Sale
Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition
( 1 )
$502.90
—
$630.20
$452.61
—
$567.18
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM kits for Ford GT have everything needed to provide a standalone, manifold referenced, OE-type returnless fuel system. When used with the low-cost Ford/Motorcraft PFS1215 fuel module, the systems will provide a 42 to 60 psi base pressure with a 1:1 manifold referenced fuel pressure change for up to 25 psi of boost--just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. The system's key to simplicity is the standalone manifold pressure sensor that tells the BoostWorx controller how to adjust the fuel pressure. Simply connect the hose from the pressure sensor mount to the intake manifold, set the fuel pressure according to the need, and you're done. The controllers can also be used with any engine that needs to have a separate MAP sensor for manifold referenced fuel pressure, and they can be used in constant pressure mode by removing the vacuum line or MAP sensor wiring, and the controller will provide a constant pressure. BoostWorx GT controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability when combined with the OEM-style fuel module * A minimum 50 percent reduction in power to the fuel pump during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
Not Yet Reviewed
$577.15
$519.44
On Sale
Agility Auto Parts offers a complete line of mechanical fuel pumps covering a wide variety of North American vehicle applications. They are engineered to meet or exceed all OEM specifications. Agility Auto Parts mechanical fuel pumps are drop-in replacements right out of the box with all the necessary components included.
( 21 )
$34.99
—
$226.99
$31.49
—
$204.29
On Sale
Aeromotive belt pump ultra high-flow adjustable EFI regulators are designed for use with EFI belt-driven fuel pumps developing over 200 gph. They feature two CNC-machined stainless steel vacuum/boost fittings and a classic Aeromotive Type II bright dip anodized finish on the body and cap.
( 3 )
$424.35
$381.92
On Sale
Aeromotive Ford 4.6L Dynamic fuel system pump kits feature Aeromotive's proven combination of bulletproof components. These complete fuel systems are designed for your late model 4.6L Ford Mustang. Kits include: * A1000 or Eliminator electric fuel pump * 100-micron billet prefilter * 10-micron post-filter * Billet aluminum high-flow Y-block * Billet aluminum 5/8 in. bore fuel rails * Billet aluminum adjustable bypass regulator * All necessary high-flow port fittings with O-rings, high-flow AN hose ends * Enough -10 AN, -8 AN and -6 AN braided stainless steel fuel line hose to properly route and connect all devices * Aeromotive HD fuel pump wiring kit * Detailed installation instructions Vehicles manufactured in June 1998 and later with OEM returnless fuel systems will require ECU reprogramming to install an Aeromotive fuel system pump kit.
Not Yet Reviewed
$3,011.10
—
$3,345.85
$2,709.99
—
$3,011.26
On Sale
Tired of fuel delivery problems? Aeromotive Eliminator EFI fuel system kits will get you pumped up! With matched component selection and correct installation, they are designed to provide outstanding performance while eliminating confusion, wasted time, and unnecessary expense. These kits feature their continuous-duty "street warrior" Eliminator fuel pump designed for high-horsepower street/strip applications. Everything you need for a complete system installation in an EFI application is included. Aeromotive Eliminator EFI fuel system kits are the solution to your fuel delivery problems.
Not Yet Reviewed
$3,357.50
$3,021.75
On Sale
Aeromotive Phantom 340 carbureted fuel pump kits include all the main components (including the highly sought, baffled Phantom 340 fuel pump) required to create a proper carbureted fuel system. They add a whisper-quiet internal pump to your stock tank that can deliver enough liquid energy to feed your high-performance street rod or muscle car, even in tanks as shallow as six inches! These systems provide a universal high-flow pre-pump filter and modular design that allows fitment to almost any fuel tank. Make the stealthy switch to Aeromotive Phantom carbureted 340 fuel systems and take advantage of modern technology in your classic ride! More product features, items, and specifications include: * Ideal for naturally aspirated and blown carbureted engines producing 900+ flywheel horsepower (street or track) * Requires AN-08 fuel hose and hose ends for proper installation of fuel return/supply lines (all sold separately) * Black anodized hanger assembly and fuel-resistant baffle/basket * Phantom 340 fuel pump (18688) * Inline filter – 10-micron (12321) * Filter bracket (12305) * Fuel pressure regulator, bypass style (13204) * Fuel pump wiring kit (16307) * Port plug –AN-06 (15626) * Three fittings - AN-06 ORB to AN-06 flare (15606) * One fitting - AN-08 ORB to AN-08 flare (15607) * Three fittings - AN-10 ORB to AN-08 flare (15610) * Two fittings - AN-06 ORB to AN-08 flare (15649) * Liquid-filled gauge – 0-15 psi (15632) * Must be used with a return style fuel system * Designed for in-tank use only
( 2 )
$1,662.05
$1,495.84
On Sale
Intended for use with custom fuel rails, Aeromotive A1000 injected bypass fuel pressure regulators feature a design specifically for use with their A1000 fuel pumps. These true billet, alcohol-compatible regulators have a beautiful finish in anodized red and black or a mirror-like, show-quality nickel!
( 13 )
$235.00
—
$279.55
$194.11
—
$251.60
On Sale
Aeromotive A1000 5.0L Mustang Stealth systems are the complete fuel systems that everyone's been asking for. The next evolution of Aeromotive's popular Mustang sumped tank fuel system, they take full advantage of one of the most advanced high performance fuel pumps available today: the Aeromotive A1000s. The 5.0L Mustang Stealth systems come fully equipped with unique versions of the A1000 fuel pumps and pre-filters, designed for and built right inside of the sump! Everything you need is in the box—from the new Stealth fuel tank to braided stainless steel fuel lines, a Y-block, high-flow billet rails, a billet adjustable regulator, port fittings, hose ends, and a fuel pressure gauge. You're now free to build the serious power you want for the street or strip with an Aeromotive A1000 5.0L Mustang Stealth system.
Not Yet Reviewed
$3,334.70
$3,001.23
On Sale
These kits from Aeromotive will put a whole fuel system into your hands. Kits include: * Pump * Relay * Wiring * AN fittings and adapters for your carburetor * Street rod billet fuel pump * Billet fuel pressure regulator * Billet filters for pump and carb protection * Stainless steel braided lines * AN to NPT fittings * AN hose ends
Not Yet Reviewed
$2,342.15
$2,107.94
On Sale
Aeromotive Eliminator 5.0L Mustang Stealth systems give you all of the components necessary to feed naturally aspirated engines up to 2,300 hp. These systems Include: * Pre-welded, sumped fuel tank * Submersed Aeromotive Eliminator fuel pump * Submersed 100-micron stainless steel fuel filter * Outlet port * Return port (returning fuel right into the baffled sump) * Proprietary, dry-break filter access for easy maintenance (filter removal automatically shuts off fuel flow, allowing for easy filter inspection and service without draining the tank)
Not Yet Reviewed
$3,368.10
$3,031.29
On Sale
Aeromotive Tsunami fuel system kits give you everything you need to completely install them on your EFI street rod, musclecar, or Pro Street vehicle. Universal kits like these are ideal if a system for your specific application does not yet exist or you already have a sumped tank or fuel cell. These systems support a wide range of performance, from 150 to 700 HP. Whether you have a street car, race car or boat, Aeromotive's Universal Fuel Systems are the right choice. The kits are designed to provide the do-it-yourselfer with all of the hardware necessary to properly install an Aeromotive fuel system on everything from a stock bodied musclecar to the most radical Pro Street cruiser. Aeromotive Tsunami fuel system kits are designed to provide outstanding performance through matched component selection and correct installation. Kit components include: * Tsunami pump * Regulator * 2 billet fuel filters * Braided lines * Hose ends * Fittings * Wiring * Relay
Not Yet Reviewed
$2,676.35
$2,408.72
On Sale
Aeromotive billet belt drive carbureted systems are specifically created for alcohol carburetor racers seeking a "complete" fuel system solution. The systems bring together the correctly matched components, designed to work together to maximize performance and consistency. They guarantee precise, accurate, repeatable, and reliable fuel control unmatched by any other alcohol carburetor fuel system. Simply set your idle fuel pressure separate from your high-load setting--no jets, pills, or barrel valves are required. These systems include an Aeromotive belt drive fuel pump kit with pump, a mounting bracket and stands, a drive mandrel, drive and driven pulleys, a belt and mounting stands, and hardware. They also include Aeromotive's double adjustable bypass regulator and mounting bracket. All components are constructed of 6061 T6 aircraft-grade billet aluminum, CNC-machined and Type II bright dip anodized for protection. Fully methanol/ethanol compatible, all components feature O-ring Boss-style AN ports for positive sealing and are able to support single or dual carburetor configurations. These are the easiest systems to plumb, most user-friendly, and are ideal for applications making up to 2,000 hp carbureted.
Not Yet Reviewed
$1,829.65
$1,646.68
On Sale
Aeromotive 700 hp EFI fuel system kits give you everything you need to completely install them on your EFI street rod, musclecar, or Pro-Street vehicle. Universal kits like these are ideal if a system for your specific application does not yet exist or you already have a sumped tank or fuel cell. These systems support a wide range of performance from 150 to 700 hp. Whether you have a street car, race car, or boat, Aeromotive's universal fuel systems are the right choice. These kits are designed to provide outstanding performance through matched component selection and correct installation. Universal kits provide the results that only years of experience can match, eliminating the confusion, wasted time, and unnecessary expense common to designing a complete system from scratch. Kit components include: * Tsunami pump * Regulator * 2 billet fuel filters * Braided lines * Hose ends * Fittings * Wiring, relay
Not Yet Reviewed
$2,676.35
$2,408.72
On Sale
Aeromotive universal fuel system kits provide everything you need to completely install a fuel system on your street rod, muscle car, or Pro Street vehicle. Universal kits are ideal if a system for your specific application does not yet exist, or you already have a sumped tank or fuel cell. Kit components include the appropriate EFI or carbureted fuel pump, a billet fuel pressure regulator, two billet fuel filters, braided lines, hose ends, fittings, wiring, a relay, and all additional hardware to install the systems on virtually any car. These systems support a wide range of performance, from 250 to over 2,000 hp, for both fuel injected and carbureted applications. Whether you have a street car, race car, or hot boat, Aeromotive's universal fuel systems are an excellent choice.
( 1 )
$3,077.95
$2,770.16
On Sale
Designed to be used with Aeromotive HP marine fuel pumps, these HP marine EFI fuel pressure regulators provide full pressure adjustments from 40-70 psi, plus a 1:1 boost/vacuum reference. The units are CNC-machined from 6061-T651 billet aluminum alloy with stainless steel hardware and handsomely finished with a type III hard-coat anodized exterior.
( 1 )
$334.70
$301.23
On Sale
Designed exclusively for the Aeromotive HP marine fuel pump, these HP marine carburetor fuel pressure regulators feature a bypass design that provides the ultimate dynamic fuel delivery system. These regulators are CNC-machined from 6061-T651 billet aluminum alloy with stainless steel hardware, and handsomely finished with a "bulletproof" Type III hard-coat anodized exterior. HP marine regulators also feature a stainless steel vacuum/boost port and are compatible with gasoline, alcohol, or diesel fuels.
Not Yet Reviewed
$368.15
$331.34
On Sale
Control your fuel pressure with one of these Aeromotive Extreme Flow EFI fuel pressure regulators. They're manufactured from durable aluminum, then anodized for maximum protection. The regulators include a standard spring (installed) that supports 30-75 psi base fuel pressure and a high pressure spring (included) to support 75-120 psi base fuel pressure. Aeromotive Extreme Flow EFI fuel pressure units also support vacuum and boost reference on a 1:1 ratio.
( 13 )
$312.95
$268.99
—
$281.66
On Sale
These A1000 carbureted bypass regulators from Aeromotive allow you to convert from fuel injection to carburetion by using your EFI fuel pump. They deliver consistent volume at perfect pressure, right to your carburetor. They feature adjustable base fuel pressure and are perfect for any application, from the street to the track, naturally aspirated or supercharged. Their bypass design provides the ultimate dynamic fuel delivery system.
( 20 )
$246.10
—
$302.35
$221.49
—
$272.12
On Sale
Aeromotive A2000 carbureted bypass regulators are ideal for use with high-volume electric or mechanical fuel pumps of any make, where dynamic flow and rock-steady pressure control are desired. With their unmatched boost reference and high-flow capacity, these regulators are perfect for blow-through carburetor applications with a turbo or centrifugal supercharger. They're available in different outlet sizes and quantities.
( 9 )
$268.95
—
$302.35
$220.11
—
$272.12
On Sale
Aeromotive fuel pressure regulator and filter combo kits are available for both EFI and carbureted applications. A 10-micron cellulose filter is paired with an adjustable regulator. The aluminum regulators are offered with a black or clear anodized finish. Specifications and notes: * AN -10 inlet and outlet ports with AN -06 return port * 1/8 in. NPT dedicated gauge port * Easy installation for street performance vehicles * Reduces required return line length -- EFI adjustable from 40 psi to 75 psi, made for A1000 and smaller pumps -- Carb adjustable from 3 psi to 20 psi, made for 250 gph and smaller pumps
( 2 )
$357.55
$321.80
On Sale
Aeromotive's Pro-Series Boost Reference EFI regulators are designed to deliver enough flow to support a whopping 2,000 hp! They're perfect if your application requires one or even two Pro-Series pumps. The Aeromotive Boost Pro-Series regulators feature two CNC-machined stainless steel fittings so that you can reference boost, and they have extra ports available for pressure gauges and transducers. These regulators include Aeromotive's exclusive AN cutoff tapered flare fittings, O-rings, and port plugs.
( 4 )
$302.35
—
$479.55
$272.12
—
$431.60
On Sale
Aeromotive double adjustable carbureted regulators are designed for use with Aeromotive's series of mechanical drive fuel pumps. These regulators allow a dual pressure strategy often required for alcohol carbureted racing engines where fuel pressure must be lower at idle, but higher as rpm and loads increase. Aeromotive double adjustable carbureted regulators prevent flooding during low fuel demands, while eliminating starvation at high fuel demands. They are capable of supporting 2,000+ hp, alcohol-burning engines. These regulators do not require jets, pills, logs, or barrel valves.
( 1 )
$334.70
—
$357.55
$301.23
—
$321.80
On Sale
FUELAB 565 Series fuel pressure regulators deliver performance and flexibility with extreme capacity. These high-flow regulators utilize massive 1/2 in. return orifices and -10 AN ports, with bypass capabilities over 5 gpm at 5 psi, to handle carbureted applications well over 1800 hp—plus EFI applications using belt-driven fuel pumps. FUELAB 565 Series fuel pressure regulators come in four different pressure ranges covering applications between 4 and 80 psi.
Not Yet Reviewed
$392.00
$352.30
—
$352.80
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
