Availability
Showing In Stock Items. Show All 26 Items.
On Sale
Vortech supercharger systems for GM LS-Swaps operate at an even higher level of sophistication than any original equipment system. They're currently one of the most popular engine swap power plants in the world. In every application, the LS systems have established themselves to be fantastic platforms to swap into just about anything. They operate at an even higher level of sophistication, with a boost curve generated by Vortech's superchargers that are ideally matched with today's highly evolved engines and give you power when you need it. The supercharger and the technologically advanced subsystems fully integrate into the vehicle's existing platform, yielding a smooth continuity of power and performance.
( 3 )
$3,915.99
$3,524.39
On Sale
Edelbrock E-Force universal supercharger systems are designed for engine swaps into street rods and muscle cars. They feature 12 in. long runners for maximum low-end torque and great drivability. They're capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than an Edelbrock E-Force universal supercharger system—exactly what you need for your engine swap project. Order the model recommended for your year/make and engine application. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
Not Yet Reviewed
$7,658.95
—
$8,739.95
$6,893.06
—
$7,865.96
On Sale
Now you don't have to run a cumbersome roots-style supercharger on your vintage muscle. Vortech's carbureted centrifugal supercharger kits are designed to bring the performance and compact fit associated with late model fuel injected kits to vehicles equipped with carbureted engines. In most cases, these kits will fit under your stock hood without modifications. The heart of each kit is either a gear-driven V-1 S-Trim head unit or a gear-driven V-7 YSi-Trim head unit, unless otherwise noted. The cast aluminum carburetor enclosure assembly pressurizes the float bowls and throttle shafts for seamless response, and is designed for use with Holley 4150 or Demon 750 MD carburetors. The enclosure features front and rear -8 AN fuel inlet ports as well as provisions for pressure and vacuum connections. Linkage arms, a splined shaft, left/right hand spherical rod ends, and carburetor studs are included for simple throttle connection and adjustment. The included oil feed and oil drain assemblies deliver the best possible lubrication and cooling for the supercharger. They also feature a 6061-T6 billet aluminum supercharger crank pulley, pulley spacer, and an automatic belt tensioner.
( 1 )
$4,319.99
$3,887.99
On Sale
Spectre muscle car cold air intake kits deliver the power-increasing technology that race cars and modern cars have employed for some time. A company rooted in racing with a definite bias toward early muscle cars and speed, Spectre has designed simple, universal cold air intake systems for your specific ride. Available for many applications, these intake kits let you choose the location to draw the cold air from—the wheel wells, cowls, front gravel shields, or even the high-beams—with the optional headlight scoops. The more cold air you take in, the more power you make. Spectre cold air intake kits help to reduce the incoming air temperature by introducing fresh cold air to the engine for incredible power gains; and since your engine won't need to work as hard, there's the added benefit of improved gas mileage. Order the model designed for your muscle car application.
( 32 )
$174.99
—
$249.99
$154.99
—
$224.99
On Sale
Holley offers a variety of direct replacement EFI wiring harnesses, including multi-port, sequential, and throttle body injection styles. These units are made with premium components to ensure better reliability and performance for your ride--and they're compatible with many engine swaps. Holley EFI systems wiring harnesses are sold individually or as a kit; choose the model needed for your fuel injection application.
( 31 )
$632.95
—
$949.95
$568.95
—
$853.95
On Sale
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS3 1000 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,445.00
$1,796.00
—
$1,956.00
On Sale
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS1 500 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,445.00
$1,796.00
—
$1,956.00
On Sale
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS1 1000 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,399.00
$1,796.00
—
$1,919.20
On Sale
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS1 750 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,445.00
$1,796.00
—
$1,956.00
On Sale
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS3 500 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,445.00
$1,796.00
—
$1,956.00
On Sale
FiTech Fuel Injection proudly introduces the Nitro-Port Cast LS3 750 hp fuel injections systems, combining FiTech's cutting-edge EFI technology with the all-new Nitro-Port Series intake manifold. Designed for serious street builds and track performers, these complete EFI systems deliver reliable horsepower and modern drivability in one powerful package. At the heart of each kit is the Nitro-Port cast intake manifold, engineered with a low-profile modular runner design, short runners for high-rpm performance, -8 AN fuel rails, pre-drilled and tapped nitrous/water injection port, and support for 92mm, 102mm, and drive-by-wire throttle bodies (drive-by-throttle bodies coming soon). Rear-mounted vacuum ports and MAP sensor location keep installations clean and streamlined. Every Nitro-Port LS EFI System includes: * FiTech ECU * Complete wiring harness * Full set of sensors (including MAP, IAT, CTS, and more) * Dual Wideband O2 sensors * Touchscreen handheld controller for setup and tuning * And of course, the Nitro-Port intake manifold These plug-and-play systems take the guesswork out of EFI conversions while delivering exceptional performance and adjustability right out of the box. Whether you're swapping an LS into your muscle car or building a high-horsepower track weapon, the FiTech Nitro-Port LS EFI Systems provide the power, tuning control, and quality FiTech is known for.
Not Yet Reviewed
$2,245.00
—
$2,445.00
$1,796.00
—
$1,956.00
On Sale
Holley is the new standard in EFI! The Holley EFI LT1 Gen V Ultra Lo-Ram intake manifold kits are designed for GM Gen V LT engines equipped with GM LT cylinder heads. They will work with OE or aftermarket cylinder heads. The Ultra Lo-Ram intake manifolds are designed for forced induction (supercharged or turbocharged) engine applications. The front-feed base intake manifold is designed with a lower overall height to fit under a stock or mildly modified hood. The Ultra Lo-Ram provides a very low-profile modular intake manifold along with various fabrication flanges to aid the fabrication of special throttle body adapters or inlet ducts for custom installations. Whether you're engine swapping your classic car or need to manage added horsepower in your twin-turbocharged drag radial race car, Holley EFI has the solutions you need to get your project up and running better than ever! Features: * Designed for GM Gen V engines equipped with GM LT type cylinder heads * As-cast aluminum (satin) and black powdercoat finishes available * 105mm diameter throttle body opening accepts OEM 4-bolt LS/LT DBW or Holley LS/LT throttle bodies * Engineered for forced induction (supercharged or turbocharged) engine applications with peak power at 7,000-8,000 rpm depending on the application * Only 0.97 in. taller than a factory LT1 manifold provides maximum clearance under a stock or mildly modified hood * Modular design and front entry plenum flange allows design and fabrication of special throttle body adapters or inlet ducts for custom installations—base manifold, plenum top, throttle body adapter available as separate kits * Clears C7 Corvette cowls and hoods without modification * Available for OE direct fuel injection only or with added port fuel injection provisions * Kits with port injection provide high volume fuel rails with 3/4-16 O-ring ports (8 AN). Mounting hardware is included * Ultra Lo-Ram kits with a burst panel flange are available, Ultra Lo-Ram billet burst panel duct is offered separately (PN: 300-608 clear anodized, PN: 300-608BK black anodized)
Not Yet Reviewed
$517.95
—
$1,099.95
$284.95
—
$949.95
On Sale
One of the most popular updates for an older vehicle is swapping out the carburetor for electronic fuel injection (EFI); but using an external pump to supply the high pressure needed for EFI can be a problem. External pumps are loud and often difficult to mount properly. Holley Sniper EFI conversion fuel tanks are the complete bolt-in solution for your EFI conversion. They're a direct-fit for a wide variety of specific applications, require no modifications, and include either a 255 lph or 400 lph submersible pump, a fuel level sender, and internal baffles. For the fuel you need with in-tank quietness, order a Holley Sniper EFI conversion fuel tank. Features include: * 255 lph model supports up to 550 hp * 400 lph model supports up to 750 hp * 60 psi at 13.5 V with a 10.4 amp draw * Made of coated, galvanized steel that is also silver powdercoated for corrosion protection * Fuel pump hanger assembly included * Sender has 1/4 in. NPT supply and return line ports for easy fuel line connection * Barbed vent fitting * Sending units have the correct ohm range for factory gauges * Fuel pump and sender are recessed into the tank * EFI-style tank baffling includes a 4.3L internal fuel tray to prevent starvation * Fits and looks like an OE tank when installed * Include new tank straps, where applicable
( 109 )
$875.95
$787.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
