Availability
On Sale
Today's aftermarket world makes it easy to pick up the phone and order 1000 HP for your street car. This has created several challenges for fuel delivery, ranging from hot fuel handling to pump noise. Aeromotive Dual Phantom Fuel Systems have been designed to solve this problem. They come loaded with two Aeromotive Stealth 340 lph fuel pumps, an additional set of electrical bulkheads, and a larger capacity foam and bladder. The pumps provide opportunity for supporting big power (see power ratings below) while remaining OEM quiet. Separate electrical bulkheads allow for an "on demand" fuel system, which reduces the amount of returned fuel and reduces the tank temperature, making vapor lock and cavitation a thing of the past. Also, this feature is a must when a redundant (back up) pump is needed in extreme conditions, such as off-road, desert, and endurance racing. The larger capacity foam and bladder combat fuel slosh while retaining enough fuel to feed the dual pumps. And the best feature is all of this done from your stock tank with no welding or fabrication! Features: * Two 340 lph Stealth fuel pumps * Supports up to 1400 HP EFI with forced induction, 1700 HP EFI naturally aspirated, 1700 HP Carbureted with forced Induction and 2000 HP carbureted naturally aspirated * Black anodized top hat * Four ORB-06 Ports – two supply, one return, one vent * Larger capacity fuel resistant baffle/basket (includes foam and bladder) * Two universal high flow pre-pump filters * Modular design can be cut to height to fit almost any fuel tank * EFI or Carbureted * Turbine pump mechanisms increase durability
( 7 )
$1,026.50
$923.85
On Sale
Aeromotive continuous duty Eliminator fuel pumps support big horsepower and maintain the driveability necessary for a true high performance street car. Designed for high horsepower street/strip applications, EFI, or carbureted, they feature Aeromotive's "dual chamber" pumping mechanism. The pumps are available in external or in-tank models. Additional features include: * -12 AN O-ring boss inlet port and -10 AN O-ring boss outlet port * Fully submersible for custom in-tank pump placement * 25 percent more flow at pressure than Aeromotive A1000 fuel pump * Supports naturally aspirated EFI engines up to 1,900 hp * Supports forced air induction EFI engines up to 1,400 hp * Supports naturally aspirated carbureted engines up to 2,300 hp * Supports forced air induction carbureted engines up to 1,700 hp
( 2 )
$801.55
—
$959.65
$721.40
—
$863.68
On Sale
Aeromotive Phantom Trifekta fuel pumps have been designed to extend the patented Phantom technology into the realm of ultra-high horsepower street/strip applications. Equipped with triple 450 lph, E85-friendly Walbro pumps, the new Aeromotive Trifekta supports staged pump control to reduce recycling and improve continuous-duty capability. Simply put, for universal, on-demand fuel delivery and ultra-high horsepower, combined with quiet, continuous-duty capability, there is nothing else on the market quite like the Aeromotive Phantom Trifekta fuel pumps! Additional attributes of Phantom Trifekta fuel pumps: * Includes a custom billet CNC hat with dual ORB-08 outlet ports, ORB-08 return, and triple electrical bulkheads to allow independent pump control * Engineered, high-capacity foam and bladder baffle * Free-flow rate: 119 gph/450 lph (per stage) * New 6 in. billet cap * One inlet size: -8 AN O-ring * Two outlet size: -8 AN O-ring * Fuel type: Gasoline, E85 * Easy installation in virtually any tank from 6 in. to 10 in. deep (no extensive fabrication or welding modifications required to install in-tank)
Not Yet Reviewed
$1,929.40
$1,736.46
On Sale
Aeromotive VaporWorx KPM1500 fuel pump/returnless PWM control systems include a KPM1500 fuel pump modified with a high-pressure regulator, returnless pulse width modulation control system, and other modifications to make them work properly for most US-based vehicles. The KPM1500 features twin OEM Bosch PWM compatible pumps, fully re-engineered pump support system, robust venturi pump systems, integral safety overpressure valves, and a built-in anti-reversion/check valve, making each fuel pump very much like an OEM part. The outlet nipple has been strengthened to reduce the chances of breakage, and their operation is smooth, quiet, and easy to control. VaporWorx PWM (pulse width modulation) kit contains everything needed to drive the KPM1500 electrically in either constant/static or manifold referenced pressure modes. These kits are intended to be used as standalone control systems. No additional relays, Hobb's switches, etc. are needed. Features: * VaporWorx modified KPM1500 fuel pump module make the OEM chassis wiring plug-and-play * Approximately 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. Practically eliminates vapor lock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset operates indefinitely without damage * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies (where appropriate)
Not Yet Reviewed
$2,917.70
$2,625.93
On Sale
Aeromotive 1988-97 Chevy Truck Dual 340 in-tank fuel pump modules are direct drop-in units for the specified years of GM 1500/2500 V8 trucks. Featuring dual 340 lph pumps, they can support up to 1,400 FWHP on gas/fuel injection/forced induction and up to 980 FWHP on E-85/fuel injection/forced induction. 100 micron pump pre-filters are included. Additional features: * No drilling required for installation * Individual wiring terminals for each pump to accommodate a staged system * Single -08 ORB outlet port for easy plumbing * Outlet, return, and vent ports include -08 90-degree swivel fittings * Vent port adapter fitting * 0-90 Ohm fuel level sender
( 1 )
$725.70
$653.13
On Sale
Aeromotive continuous-duty Eliminator brushless variable speed fuel pumps support big horsepower and maintain the driveability necessary for a true high performance street car. Designed for high-horsepower street/strip applications, EFI or carbureted, they feature a "dual chamber" pumping mechanism. Their True Variable Speed Controller (TVS) offers the advantage of pump speed control via a 0 to 5 V analog DC input signal. Capitalizing on Aeromotive brushless technology, the pumps reduce fuel flow during low demand, decrease an already low current draw and, therefore, minimize the introduction of heat even further. Order the body style preferred for your application. Additional features include: * -12 AN O-ring boss inlet port and -10 AN O-ring boss outlet port * Fully submersible for custom in-tank pump placement * 25 percent more flow at pressure than Aeromotive A1000 fuel pump * Supports naturally aspirated EFI engines up to 1,900 hp * Supports forced air induction EFI engines up to 1,400 hp * Supports naturally aspirated carbureted engines up to 2,300 hp * Supports forced air induction carbureted engines up to 1,700 hp
Not Yet Reviewed
$1,249.30
$1,124.37
On Sale
Mr. Gasket micro electronic fuel pumps are compatible with gasoline, alcohol, diesel, and E85 fuels and additives (depending on the model). They feature solid-state, worry-free electronics and eliminate vapor lock and flooding. Great as stand-alone or booster pumps, the micro units are self-priming and have a simple 2-wire design. They work with 12 V negative-ground systems and include mounting hardware. Mr. Gasket micro electronic fuel pumps will supply adequate fuel, time and time again.
( 79 )
$63.79
—
$111.95
$47.84
—
$61.95
On Sale
Aeromotive Phantom Apex in-tank fuel pumps open the door to OEM convenience—but with high-horsepower pump flow rates that only Aeromotive pumps can provide. These gasoline, E85 type fuel pumps utilize an advanced, patent-pending jet-siphon technology that provides a constant supply of cool fuel to the Phantom bladder, allowing the system to dominate in extreme applications. From extreme cornering loads to extreme off-angle vehicle environments, these pumps maintain fuel supply to the Phantom pump and bladder assembly—even when fuel tank levels are low and fuel is moving away from the pump location. The pumps are available in different flow rates. Additional details: * Kits include 4 ft. of gasoline and ethanol-rated suction line, with a controlled pickup that maintains 1/8 in. clearance to the tank bottom * Pickup line can be secured to the intended pickup point within the tank via a 2-magnet system (compatible with any tank material: poly-plastic, aluminum, stainless steel, and mild steel) * Jet-siphon P/N 187056 is also sold separately (for use with your existing Phantom fuel pump)
( 2 )
$981.95
—
$1,104.45
$883.76
—
$994.00
On Sale
It's hard to find inline fuel pumps that are more powerful and higher flowing than the Aeromotive Pro Series. Engineered for high-horsepower racing engines, these awesome pumps feature the Aeromotive dual-chamber pump design. Additional features include: * Beautifully plated with Aeromotive electroless nickel process * -12 AN O-ring boss inlet port and -12 AN O-ring boss outlet port; adapter fittings included * Fully submersible for custom in-tank pump placement * Supports naturally aspirated EFI engines up to 2,200 hp * Supports forced air induction EFI engines up to 1,700 hp * Supports naturally aspirated carbureted engines up to 2,600 hp * Supports forced air induction carbureted engines up to 2,000 hp
Not Yet Reviewed
$1,093.85
$984.46
On Sale
Aeromotive Phantom 300 universal diesel fuel pumps offer the classic Phantom design with Aeromotive's cutting-edge fuel delivery technology for the diesel market. Designed for racing applications, the Phantom 300s will ensure the consistent flow you've come to expect, and they are available in single and dual pump models. Choose the one your prefer. Specs and additional features and benefits: * Single pump flow ranges: -- Low range 81.98 gal./hr. at 16 psi, 7 amp, 13.5 V -- High range 37.5 gal./hr. at 100 psi, 14 amp, 13.5 V * Dual pump flow ranges: -- Low range 163.96 gal./hr. at 16 psi, 7 amp, 13.5 V -- High range 75 gal./hr. at 100 psi, 14 amp, 13.5 V * In-tank gerotor pump stays cooler and quieter than an exterior pump * Has a higher flow than most factory lift pumps * Extended bracket length allows for installation in deeper tanks (6 to 20 in.) * 300 micron pre-filter is included
Not Yet Reviewed
$693.35
—
$996.25
$624.02
—
$896.62
On Sale
Holley OEM-style EFI fuel tank modules are designed as a direct replacement for your factory pick-up and sending unit. There's no need for modifications—and you won't have to replace your fuel tank! You can even retain the factory fuel hard line; just connect the outlet of the pump module to the hard line on your vehicle with some EFI-rated fuel hose and hose clamps. Order the model designed for your vehicle application. Additional features of Holley OEM-style EFI fuel tank modules: * Module includes a pre-calibrated fuel-level sending unit that is designed to work with the factory fuel gauge already in vehicle * Holley includes a HydraMat with its unique internal reservoir to keep fuel available at the pick-up, while also providing protection from contaminates * Fuel pressure is regulated internally and preset at 58 psi, eliminating the added expense of purchasing an external fuel pressure regulator * No return line needed (all return fuel is handled inside the tank)
Not Yet Reviewed
$530.95
$292.95
On Sale
Aeromotive VaporWorx Ally KPM1500 returnless PWM (pulse width modulation) system kits include a KPM1500 fuel pump modified with a high-pressure regulator, returnless Ally PWM control system, and other modifications to make them work properly for FSCM-equipped vehicles and aftermarket ECM/FSCM (fuel system control module) systems. The KPM1500 features twin Bosch PWM compatible OEM pumps, fully re-engineered pump support system, robust venturi pump systems, integral safety overpressure valves, and a built-in anti-reversion/check valve, making each fuel pump very much like an OEM part. The outlet nipple has been strengthened to reduce the chances of breakage, and their operation is smooth, quiet, and easy to control. The weakness of the OEM FSCM is power capability. They can drive one high-power pump, but not two. That's where the VaporWorx Ally PWM (pulse width modulation) kit comes in. It contains everything needed to drive the second KPM1500 electrically while the OEM fuel system control module handles the primary, keeping the power separated, but control of both pumps is handled by the FSCM, and all feedback, diagnostics, fuel pressure, etc. remains functional. These kits are intended to be used as an Ally, or piggyback, system to help the OEM FSCM. No additional relays, Hobb's switches, etc. are needed. Features: * VaporWorx modified KPM1500 fuel pump module make the OEM chassis wiring plug-and-play * Using PWM to slow down the pumps is very effective in keeping fuel temperatures down and relieving the electrical system of excessive load * Ally PWM controller is a unique control strategy that helps reduce the amount of power that the FSCM produces at higher fuel demand * At higher duty cycles the Ally PWM controller will start to out-run the FSCM and take more of the pumping power load, "helping out" the fuel system control module * Approximately 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. Practically eliminates vapor lock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset operates indefinitely without damage * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies (where appropriate) * All cross-linked polyethylene wiring * UL94 rated components used throughout
Not Yet Reviewed
$2,917.70
$2,625.93
On Sale
Now you can get more performance from your diesel with Aeromotive diesel lift pump kits! They're built with features you'll appreciate, such as: Precise pressure control via the Aeromotive convoluted diaphragm regulator; a fuel pressure gauge for accurate system pressure monitoring; a built-in check valve to keep the system primed; a submersible motor design with no dynamic shaft seals to erode; and a CAT 2-micron fuel filter. Duramax kits include a "fail safe" valve. In the event of failure or a no-run condition, the valve opens and allows fuel to bypass the pump—so the engine continues to run and you can get to your destination, eliminating tow bills. Order the model recommended for your application. Additional features include: * Unique draw-through technology * 3/4 in. in tank pickup tube * 100 micron in-tank filter * In-tank baffle included, eliminating 1/4 tank issue * Quick-disconnect fittings for all fuel lines * 1 in.-14 fuel filter thread allows the use of other common filter brands * Stainless steel filter stud and filter dip tube (corrosion-resistant) * Flow-through design; no shaft seal to fail or leak * Wiring harness with Delphi sealed Weatherpack connectors (vehicle-specific pumps only) * Self-priming, no need to pre-fill the filter during install or filter swap * Available with your choice of gph ratings * OEM-style return; no need to modify the filler neck
Not Yet Reviewed
$1,757.50
—
$2,732.60
$1,581.75
—
$2,459.34
On Sale
Waterman Racing Standard Sprint gear fuel pumps are available in multiple configurations. They're designed and machined from forged aluminum—and house machined steel shafts and precision lapped gears. Select the pump with inlet/outlet ports and GPM flow rate needed for your application.
( 1 )
$651.99
—
$943.99
$586.79
—
$849.59
On Sale
Waterman Sprint gear pumps come in different configurations. You choose a set of gears based on your fuel demands and rpm, then choose the pump body and standard or reverse rotation. Pumps are designed and machined from forged aluminum to house machined steel shafts and precision lapped gears. Waterman Racing Super Sprint (mini Bertha) pump bodies will have either ORB-08, 10, or 12 inlet and outlet ports.
Not Yet Reviewed
$943.99
—
$1,267.99
$849.59
—
$1,141.19
On Sale
Aeromotive offers various brushless 5.0 gpm gear pump fuel cells, featuring the pump and a 100-micron prefilter which can be mounted anywhere in any vehicle. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
( 2 )
$2,219.60
—
$3,100.75
$1,997.64
—
$2,790.68
On Sale
Aeromotive offers various brushless Eliminator fuel cells, featuring the pump and a 100-micron prefilter which can be mounted anywhere in any vehicle. Simply strap the fuel cell in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
Not Yet Reviewed
$1,316.65
—
$2,665.75
$1,184.98
—
$2,399.18
On Sale
Aeromotive offers various brushless A1000 fuel cells, featuring the pump and a 100-micron prefilter which can be mounted anywhere in any vehicle. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
( 1 )
$1,417.45
—
$2,431.80
$1,275.70
—
$2,188.62
On Sale
Aeromotive offers various brushless 3.5 gpm gear pump fuel cells, featuring the pump and a 100-micron stainless steel prefilter which can be mounted anywhere in any vehicle. Simply strap the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and get ready to drive! Through an innovative interior baffling system, the inlet carries a constant column of fuel, keeping it at that same point, even during extreme driving conditions. This quality makes them perfect for off-road vehicles, drag racing, autocross, drifting, and more! Additional features include: * Available in 6, 15, or 20-gallon capacities * In-cell pump reduces noise and prolongs cooler running for longevity and drivability * All-aluminum construction * TIG-welded * Flush-mount lid assembly * (2) -8 AN rollover valves * Universal 0 to 90-ohm built-in fuel level sending unit * Return fitting (-8 AN) for bypass line from the fuel pressure regulator * Brushless pump allows for higher pressure with minimal drop in flow
Not Yet Reviewed
$1,929.40
—
$2,877.95
$1,736.46
—
$2,590.16
On Sale
Waterman Racing is proud to introduce their Late Model Micro Midget gear fuel pumps! Close tolerances are the key to all of Waterman's line of fuel pumps. The Meehanite gears are coated with polymer and hand-lapped to match the wear plates for tight clearances. Carbon bearings are used and matched with heat-treated shafts for longevity. Housings feature hard-anodized gear pockets, as in all the Waterman pumps; and the standard 3/8 in. hex drive with swivel flange offers easy installation. In addition, these pumps weigh 1 lb. 3 oz. (3/4 of a pound lighter than any other standard late model pump!) and overall length has been shortened to a mere 3-inches! Select the model with flow rate best suited for your vehicle.
Not Yet Reviewed
$669.99
—
$698.99
$602.99
—
$629.09
On Sale
When electric just isn't enough, it's time to move to a more efficient method of delivery like the Ultra-Lite Sprint gear fuel pumps from Waterman! They've taken the same Sprint fuel pump that's well-known for low maintenance/high-performance dependability and made some cosmetic changes. Waterman has intricately scalloped the front cover, pump body, and swivel flange, in addition to rifle-boring the shafts. When combined, these changes equate to not only a substantial reduction in weight—but a new sleeker look! This updated design has also found a home with the Import crowd. The Ultra-Lite pump still has the exact internal workings (including machined steel shafts and precision lapped gears) as the original Sprint pump, so you know you're bolting on a quality product with a proven track record! Each pump is flow-tested (hand-written flow data sheet included) to ensure optimum performance and then shipped "race ready" Order the flow rate and model best suited for your vehicle.
Not Yet Reviewed
$760.99
—
$830.99
$684.89
—
$747.89
On Sale
Aeromotive diesel lift pumps have the flow to fuel even the most aggressive diesels. They were developed to solve key issues with competitors' diesel lift pumps, most notably: low fuel level problems; pressure control concerns; and motor shaft seal failures. With a brushless motor design that reduces current draw by 33 percent, Aeromotive has increased performance and more than doubled the service life of brushed motor diesel lift pumps. Their single filter design simplifies the pump and reduces maintenance costs. All Aeromotive diesel lift pumps include a Caterpillar 2-micron filter to catch the smallest particles. Additional features include: * Unique draw-through technology * 1 in.-14 fuel filter thread—allows the use of other common filter brands * Stainless steel filter stud and filter dip tube (corrosion-resistant) * Flow-through design; there is no shaft seal to fail or leak * Self-priming, no need to pre-fill the filter during installation or filter change * Fuel pressure gauge lets you dial-in the desired pressure accurately and reliably * Available with your choice of GPH ratings * OEM-style return; no need to modify the filler neck
Not Yet Reviewed
$1,366.55
—
$1,701.30
$1,229.90
—
$1,531.17
On Sale
Aeromotive Eliminator Stealth fuel cells feature their built-in Eliminator electric fuel pump and a 100 micron stainless steel prefilter. They can be mounted anywhere in any car. Simply strap one of the fuel cells in, hook up your fuel line to the pump outlet and your two wires, and you're done. You won't have to search any longer for a place to mount your fuel pump and pre-pump filter. Through an innovative baffling system inside of the cells, the fuel pump inlet always has a constant column of fuel. In addition, the Aeromotive Eliminator Stealth fuel cells' baffling keeps fuel at that same point, even during extreme driving conditions, making them perfect for off-road vehicles, drag racing, and even autocross and drifting. Plus, the pump is inside of the cells, so noise is drastically reduced, and the fuel pump runs cooler longer, ensuring longevity and drivability. Additional features include: * Available in 15 or 20 gallon capacity * All-aluminum construction * TIG-welded * Flush mount lid assembly * Two -8 AN rollover valves * Universal 0-90 ohm built-in fuel level sending unit * -8 AN return fitting for bypass line from the fuel pressure regulator
( 1 )
$1,405.25
—
$1,573.45
$1,264.72
—
$1,416.10
On Sale
Dirty fuel filters can cause many drivability issues, such as low fuel pressure, loss of power, poor fuel mileage, and carburetor flooding. Mr. Gasket chrome canister fuel filters are designed to be installed between the fuel pump and carburetor. They're a welcome addition to any custom or high performance engine. Polished to a high luster to complement other underhood chrome accessories, their inlet/outlet hose fittings have a safety bead for positive fuel line retention. Keep your ride in top shape with a new fuel filter from Mr. Gasket. Features include: * Inline fuel filter for carbureted applications * Chrome finish * Offered in sizes to fit either 3/8 in. or 5/16 in. hose applications * Aluminum versions include a replaceable, powdered bronze filter element * Not for use with fuel injection
( 12 )
$11.95
$6.57
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
