Availability
On Sale
AEM Electronics high-flow external electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable service and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a pre-filter, hose, clamps, and flying lead. Select the model with the size, psi limit, and flow rate needed for your application.
( 34 )
$189.95
$170.95
On Sale
AEM Electronics Tru-BoostX gauge-type controller kits combine the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for setup and they are fully functional right out of the box. If you want more boost, press the button on the right of the gauge face, and if you want less boost, press the button on the left of the gauge face. It's that simple, and it works! AEM Electronics Tru-BoostX gauge-type controller kits contain everything you need, including an on-board 80 psig pressure sensor, built-in overboost protection with two timed shutdown levels, a scramble boost setting, and a low-side output for a warning light. AEM includes a boost control solenoid that is specifically manufactured for automotive boost applications. This means that it will not corrode and stick from exposure to rich fuel mixtures, is pressure-tested to 100 psi, and includes -4 AN fittings to eliminate any chance of leaks.
( 3 )
$380.95
$342.85
On Sale
These AEM Electronics high-flow in-tank electric fuel pumps are designed for high performance, naturally aspirated, and forced induction EFI. They deliver reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps. The pumps include a rubber sleeve, end caps, a prefilter, hose, clamps, and flying lead.
( 50 )
$111.95
—
$162.95
$100.75
—
$139.45
On Sale
AEM Electronics water/methanol injection kits allow you to increase boost pressure and advance timing without having to run higher-octane fuel resulting in significant horsepower gains.
( 35 )
$499.95
—
$674.95
$448.95
—
$606.95
On Sale
AEM Electronics high-capacity fuel pressure regulators are universal and adjustable. They are the perfect solutions for racers who need reliable fuel pressure in high-boost vehicles, and race cars that require a large volume of fuel delivery. AEM high-capacity fuel pressure regulators are CNC-machined from 6061-T6 billet aluminum. Features include: * Universal fuel pressure regulator adapts to virtually any vehicle * Longer spring for wider range of adjustment (40 to 130 psi) * Single large return orifice accommodates very high-flow rate pumps * Boost dependent rising fuel pressure rate (1:1) * Three 9/16 in.-18 ORB O-ring style inlet ports (2 inlet, 1 return) * Durable, easy-to-use adjustment screw * Integrated 1/8 in. NPT gauge port * 5mm (3/16 in.) vacuum hose * Alcohol fuel and race gas compatible
( 8 )
$167.95
$151.15
On Sale
These billet aluminum AEM Electronics fuel pressure regulators can support engines of up to 1,000 hp. Featuring replaceable discharge ports to match your fuel pump output, they're adjustable from 20 psi up to the maximum pump capacity rating. AEM Electronics billet adjustable fuel pressure regulators are available in a variety of colors for a variety of applications.
( 15 )
$157.95
—
$217.95
$142.15
—
$196.15
On Sale
The G-Force III is the latest iteration of Go Fast Bits' feature-packed electronic boost controller—now with the ability to monitor and display your engine's air/fuel ratio in either Lambda or AFR. By connecting the analog output of most wideband oxygen controllers (i.e. Innovate LC-2, AEM UEGO etc.; sold separately) to the G-Force III's auxiliary input, you can toggle between boost pressure and air/fuel ratio display. This saves you from having to install a separate AFR gauge in your car, and it can also save your engine! A lean mixture at high boost can destroy an engine in seconds, and a stand-alone AFR gauge is next to useless when accelerating hard, as your concentration is likely to be on the road in front of you. The G-Force III safeguards your engine against a lean mixture by lowering boost to the minimum setting, and visibly warning you by flashing the display lighting. Whether your car is a daily driver or an all-out track weapon, the G-Force III has the features to tailor boost to suit your needs. Set up to six boost presets and select on the fly; use the scramble feature for overtaking, launching, towing, or protecting the engine—and you can even customize the lighting color to suit your interior! No other EBC on the market offers the features, control, ease of use, and value for money like the G-Force III! Additional G-Force III electronic boost controller details: * For boost pressures up to 50 psi (3.45 bar, 345 KPA) * Adjust peak boost, rise rate, and closed loop correction. * Display boost pressure in PSI, BAR, or KPA * 6 Boost presets, individually programmable * Unique "scramble" feature with remote switching * Peak boost recall * Air/fuel ratio display in AFR or Lambda (when connected to a wideband oxygen controller) * Separately adjustable overboost and lean mixture warning/boost cut * Touch buttons with user selectable illumination colors * Auxiliary input to switch boost presets or activate scramble * 1/2 DIN size casing, fits standard stereo slot * Supplied with MAC 3-port solenoid
( 1 )
$396.00
$356.40
On Sale
These AEM Electronics water/methanol controllers feature a variable-flow progressive design that allows the user to determine the amount of water/methanol mixture to feed into the inlet stream from the fluid reservoir. They are designed to control a high-pressure, recirculation-style pump to deliver the mixture.
( 8 )
$206.95
$186.25
On Sale
AEM Electronics water/methanol injection nozzles are available in different jet sizes that allow you to select the appropriate jet for your power level. The nozzles are serviceable and can be disassembled for cleaning.
( 11 )
$93.69
—
$108.95
$84.35
—
$98.05
On Sale
AEM Electronics water-methanol injection solenoids eliminate any chance of water-methanol flow into the inlet when the WMI system is not engaged. This affordable water-methanol injection accessory features high-flow capability (3,600cc/min.)—and an impressively low current draw of only 0.75 amp that does not require the use of an additional relay. The valve body features include 1/8 NPT ports with included push-to-lock 1/4 in. hose fittings for easy connection, and EPDM seals that stand up to corrosion for years of reliable use. It's an inexpensive insurance policy to protect your high performance engine, regardless of the brand of water-methanol injection system you're using.
( 5 )
$124.95
$112.45
On Sale
These AEM Electronics boost control solenoid kits will not degrade rich fuel mixtures like most common boost control solenoids. This will significantly extend life and eliminate the chance of sticking from contamination. They are pressure-tested to an amazing 100 psi and will not leak. AEM Electronics boost control solenoid kits include -4 AN fittings so that you can securely attach wastegate lines without worrying about leaking at the connection. AEM also includes the barb-style hose fittings where push-on fittings are required.
( 5 )
$135.95
$122.35
On Sale
Designed with racers in mind, AEM Electronics universal high-flow inline fuel filters can process an astounding 12.32 gpm at 45 psi and 2.63 gpm at 6 psi. This maximum flow and filtration ensure top performance when using gasoline, alcohol, or blended fuels. The housing is machined from 6061-T6 billet aluminum and then hard anodized black, while all sealing gaskets and O-rings are made of Viton®, proven to resist chemicals and extreme temperatures. The end caps have been machined with -10 AN female fittings and an O-ring receiver groove. Inside, the fabric element can filter as low as 7 microns. AEM Electronics universal high-flow inline fuel filters measure 2 in. O.D. by 10 in. long for an easy and versatile installation. Replacement filter cartridges are commonly available, sold separately. Clean fuel means better performance—trust the AEM racing solutions that are engineered to outperform!
Not Yet Reviewed
$99.95
—
$145.95
$89.95
—
$131.35
On Sale
AEM Electronics water/methanol injection system reservoirs are an important component to reduce engine knock and improve horsepower. They feature an integral fluid level sensor, so you never have to worry about running out when the boost is needed. Whether you want to upgrade the amount of fluid held in reserve, or just want to have a replacement on hand, AEM Electronics has you covered. These plastic reservoirs are available in multiple sizes.
( 3 )
$160.95
—
$217.95
$144.85
—
$196.15
On Sale
A tweak here and a trim there—AEM universal trim pots will shape your engine's efficiency for performance. These 12-position trim pots can be used with virtually any engine management system to adjust a number of trims … from fuel and ignition timing to boost and more. Included in each pack is the 12-position trim pot with flying lead that has 12 in. insulated, color-coded wires, two brushed silver trim position decals with ranges from -5 to +6 and 0 to +11, and knob decals. AEM trim pot specifications: * Total resistance: 14.3KO * Cycles minimum: 10,000 * Positions: 12 * Degree rotation: 330 * Mounting: 3/8 in. hole * Jam nut: 1/2 in. hex * Knob set screw: 1/16 in. Allen * Supply current: 5 Vdc
( 7 )
$38.10
$34.29
On Sale
AEM Electronics offers a cleaner flow of water/methanol for your engine with their injection filters. Their filters not only protect the internals of your engine, but the working components of the water/methanol pump as well! Your AEM injection kit is a great, low-cost way to increase the power of your gas or diesel engine, and using their water/methanol injection filters will help to increase pump life. Built from rugged polypropylene, these filters are easy to install, completely serviceable, and fit most systems on the market today. The stainless steel mesh strainer filters foreign particles as small as 40 microns without significant reduced flow. Feed your engine clean fuel with AEM Electronics water/methanol injection filters.
( 7 )
$49.95
$44.95
On Sale
Restore the performance of your high-mileage fuel pressure regulator with AEM Electronics fuel pressure regulator rebuild kits. You'll regain the accuracy and performance that your regulator had when it was new.
( 1 )
$65.35
$58.85
On Sale
AEM water/methanol injection pumps help to increase the power of your engine. These recirculation-style pumps make great replacements for most water/methanol kits. Or, use them when creating your own special setup. AEM upgrades their pumps to ensure consistent fluid delivery for optimum performance with no erratic on/off pulsing, unlike older switched-styles. Their water/methanol injection pumps are designed with Santoprene diaphragms and EPDM seals to withstand the harshest of alcohol mixes. For better performance, consider an AEM water/methanol injection pump.
( 11 )
$199.95
$179.95
On Sale
AEM Electronics high-volume fuel rails feature a 1/2 in. fuel bore capable of flowing enough fuel to support most high-horsepower applications. Their large bore also dampens back pulses created by larger injectors and works perfectly with stock injector sizes. An additional port is included to accommodate a nitrous setup or fuel pressure gauge. Instructions, hardware, fittings, and injector O-rings are also included.
( 7 )
$159.95
—
$173.95
$143.95
—
$156.55
On Sale
AEM Electronics offers a full line of replacement components for your water/methanol injection system. These components are direct replacements for the original pieces, so you can be assured of the highest quality and a correct fit.
( 4 )
$206.95
$186.25
On Sale
These AEM Electronics water/methanol injection pump and jet kits are intended for those who don't have room to mount even a one gallon tank, resulting in the use of the factory washer bottle. Kits include: * Check valve integrated into the nozzle that prevents unintended fluid flow * Boost referenced progressive controller * One injector and three nozzles to cover a wide range of horsepower levels * High-pressure 200 psi recirculation-style pump * LED dash light for system status * 20 ft. of injection tubing
( 1 )
$499.95
$448.95
On Sale
These high performance fuel filters from AEM Electronics are capable of supporting power applications of up to 500 hp. They feature double O-ring seals for added leak protection and their 6061 aluminum bodies provide excellent durability. These application-specific filters fit in your stock location and are easily assembled and disassembled, thanks to their large, machined hexes on the top and bottom. They're also available in your choice of anodized colors to match your other accessories.
Not Yet Reviewed
$162.95
$146.65
On Sale
Mr. Gasket micro electronic fuel pumps are compatible with gasoline, alcohol, diesel, and E85 fuels and additives (depending on the model). They feature solid-state, worry-free electronics and eliminate vapor lock and flooding. Great as stand-alone or booster pumps, the micro units are self-priming and have a simple 2-wire design. They work with 12 V negative-ground systems and include mounting hardware. Mr. Gasket micro electronic fuel pumps will supply adequate fuel, time and time again.
( 79 )
$63.79
—
$111.95
$47.84
—
$89.95
On Sale
FUELAB 529 Series electronic fuel pressure regulators work directly with the FUELAB Prodigy line of fuel pumps to reduce heat build-up and vapor lock conditions related to street/strip operation. Set the pressure mechanically like a traditional bypass regulator and let their demand-based speed control take care of the rest! These regulators generate a signal to the pump to control the return line flow rate. This feature reduces current draw while at low engine output to prevent fuel overheating--which could lead to system failure. Additional info: * Designed for use with FUELAB® Prodigy fuel pumps (41401,41402,41403,42401, and 42402 only) * Patented method for demand-based flow control; able to detect changes in demand before change in rail pressure is realized * Automatically reduces current draw at low flow demand * Additional analog output to track actual fuel system capacity * Independent system--no other connections, control boxes, or calibration required * Gasoline, diesel, methanol, and ethanol fuel compatible * Billet aluminum construction with anodized finish * Fine thread pitch for precise pressure adjustment * Versatile mounting bracket and stainless steel hardware * 1/8 in. NPT gauge port with plug for external pressure gauge * 1/8 in. NPT pressure reference port with barbed fitting
Not Yet Reviewed
$550.00
—
$560.00
$495.00
—
$504.00
On Sale
AEM CD-7 plug-and-play adapter cables make CD dashes the perfect racing displays for track day enthusiasts who want to be able to see engine and vehicle data but are still running a factory ECU. For CD dash owners with CAN OBD-II who are already using the dash and receiving channels from a data logger or other CAN-enabled device, you can now add additional channels through the OBD connection with no additional wiring!
( 1 )
$40.28
$22.15
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
