Availability
On Sale
The new line of Edelbrock VRS-4150 Race and Performance carburetors are packed with features that will appeal to racers, engine builders and carb tuners, as well as the hot street enthusiast looking to improve performance. The VRS-4150 carburetors are street friendly but race ready—and the one-piece, cast aluminum bodies fit all 4150 and 4500 carb flange manifolds—without requiring an adapter plate. With the new VRS Series carburetors many attributes, they make for easy tuning and great versatility in many applications. They are available in 650, 750, 850, and 950 cfm models, select the model suited to your application needs. Features, specs, and benefits: * A street throttle arm, PTFE-coated throttle shafts and built-in provisions for a standard GM three-wire TPS mount add features to the carburetor that are ideal for any user * Multiple vacuum hook-ups keep this carburetor usable on the street but still ready for the track with larger capacity fuel bowls and four circuit billet metering blocks with screw-in emulsion bleeds * The 20 percent larger capacity fuel bowls feature internal ribs to control fuel slosh, and a sculpted baffle directs incoming fuel to the sides to minimize bubbles * The floats have corner cuts to avoid shutting off the fuel flow during hard cornering, and jet extender notches and jet extenders in the rear to keep the jets covered in fuel under hard acceleration * Users are able to externally adjust idle bypass air as the adjustment screws are accessible without removing the air cleaner/scoop * The advanced idle circuit features interchangeable idle discharge jets in all four corners to allow for a smooth, clean idle with the use of big, low-vacuum camshafts * Normally found only in high end racing carbs, the VRS includes fully adjustable intermediate fuel circuits, which help to provide incredible throttle response * For greater control at high rpm, the high speed/main fuel circuit is split into two bleed circuits—one each for the lower and upper sections * As an additional feature, the power valves are located on both primaries and secondary's that support optimized jetting—the power valve will add fuel as necessary while the power valve protection circuit prevents diaphragm damage from backfires
( 16 )
$827.95
—
$1,047.95
$745.16
—
$943.16
On Sale
Holley EFI LS Hi-Ram intake manifold bases are cost-effective alternatives to fabricated sheet metal for high performance applications where induction system height is not limited. Coupling these cast aluminum Hi-Rams with the high flowing LS-style cylinder heads has outstanding potential for N/A and forced induction applications at a budget-minded cost. These modular lower manifolds accept a wide range of carbureted and EFI tops, making them attractive to builders and fabricators as the perfect foundations for custom induction systems. Fuel rails are included and machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flows and dampen pressure pulsations in the fuel system. The aggressive, bold, race-bred styling of Holley GM LS modular Hi-Ram lower manifolds will make bad intentions clear for drag race, muscle car, marine, off-road, sand rails, pulling trucks, track, and street-rod applications.
( 1 )
$899.95
—
$999.95
$808.95
—
$898.95
On Sale
Holley Strip Dominator intake manifolds are classics that have been making power for Chevys for almost as long as Holley has been making carburetors. They're proven power builders, engineered to achieve maximum performance. Their single plane design, with a deep, open plenum and isolated runners, produces good power from 4,500 rpm to 7,600 rpm for small blocks, and up to 8,500 rpm on big blocks. There is no exhaust heat crossover.
( 35 )
$399.95
—
$471.95
$359.95
—
$423.95
On Sale
These Quick Fuel FOUR DOOR power valves feature an exclusive in-house design that has become the preference of professional race teams in virtually every circuit where carburetors are used. They have a greater flow capacity, a quicker response rate, and tighter limit bands that allow engine builders to precisely tune the power enrichment phase of their calibration. All Quick Fuel FOUR DOOR power valves are hand-tested and set to the stamped value. Their thicker molded diaphragm adds increased protection against backfire-induced rupture.
( 51 )
$13.97
$12.57
On Sale
In head-to-head dyno testing, Holley Keith Dorton Signature series intake manifolds outperformed the nearest competition by 25 HP at 7,100 rpm. Engineered by Holley and professional engine builder Keith Dorton, their single plane design yields superior power in the 4,500 rpm to 8,500 rpm range. They fit 23 degree, standard-port Chevy small block heads, have a square bore mounting flange, and are ideal for classes requiring cast iron heads and un-ported manifolds. They're designed for Oval Track and drag racing.
( 2 )
$564.95
$507.95
On Sale
FiTech Nitro-Port cast LS3 500 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
FiTech Nitro-Port cast LS3 1000 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
FiTech Nitro-Port cast LS1 1000 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
FiTech Nitro-Port cast LS3 750 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 2007 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
FiTech Nitro-Port Series cast intake manifolds are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. These manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
( 1 )
$715.00
$572.00
On Sale
FiTech Nitro-Port cast LS1 750 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
FiTech Nitro-Port cast LS1 500 hp EFI loaded intake manifold kits are engineered for serious street and strip enthusiasts, providing power, precision, and versatility to LS1 and LS3 platforms. Designed with performance and adaptability in mind, Nitro-Port manifolds feature a low-profile, modular design ideal for tight engine bays while supplying aggressive performance gains. Short runners support high-RPM power, and -8 AN fuel rails with -8 ORB fittings ensure consistent high-flow fuel delivery under demanding conditions. For those pushing the limits, integrated nitrous/water injection bungs offer easy expandability, while rear-mounted vacuum and pressure ports keep plumbing clean and accessible. The manifolds also include a rear-mounted MAP sensor location for simplified installation. The Nitro-Port accepts 92mm, 102mm, and drive-by-wire throttle bodies with a straight throttle body mounting flange, allowing builders more flexibility across multiple LS configurations. Whether you're building a high-revving track machine or a show-stopping street car, FiTech Nitro-Port cast manifolds deliver the performance, reliability, and engineering excellence customers expect from FiTech Fuel Injection. * Models are available for a variety of Chevy engines from 1997 and up.
Not Yet Reviewed
$1,200.00
$960.00
On Sale
NOS Sniper EFI wet nitrous kits are the perfect upgrades for budget-minded builders who want the easy bolt-on power that made nitrous famous. Sniper EFI kits feature the exclusive NOS soft-plume fogger nozzle that finely atomizes the fuel for superior nitrous and fuel distribution. Sniper kits include all necessary installation components and will provide up to 75 hp in 4- and 6-cylinder engines—and up to 150 hp in 8-cylinder engines. Order the universal or recommended kit to best fit your vehicle and engine application.
( 5 )
$849.95
$763.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
