Availability
Showing In Stock Items. Show All 18 Items.
On Sale
Fleece Performance offers Cheetah FMW VNT turbochargers for a variety of diesel trucks to enhance your driving experience. These drop-in replacements come with a Fleece-engineered 63mm FMW compressor wheel and high-flow Cheetah turbine wheel. You'll enjoy the spool-up and throttle response of a small turbo and still get the big top-end power you're looking for. Rated at up to 650 rear wheel horsepower (depending on model), this is the ultimate combination for dual-purpose applications. If you're towing during the week and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket. Order the turbo model recommended for your vehicle. Additional details: * Stock appearing: Uses the stock housings with updated internals. This allows you to keep all factory systems intact, yet enables you to safely run 40 psi of boost. No aftermarket components or modifications needed for installation. * Proven Technology: Built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. * Powerful Yet Responsive: Turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. * Exclusive FMW wheel technology: – Forged milled wheels – Faster spool-up – Increased throttle response – Broader torque curve
( 2 )
$1,979.00
—
$2,649.00
$1,682.15
—
$2,251.65
On Sale
If you're seeking exciting performance out of a drop-in-and-go unit, then you need Fleece Performance Cheetah FMW HX35 turbochargers. They feature a high-flow turbine wheel, a 63mm FMW compressor, and reduced EGTs. These turbos do not require specialized tuning, and yet they provide quick response, excellent overall drivability, and support up to 650 RWHP. Whether you want more seat-of-the-pants performance, or torque for towing, Fleece Performance Cheetah FMW HX35 turbochargers have you covered. Important application information: Customers with 1994-2002 vehicles need to look at the pictures of part numbers FLE-FPE-HX35-GTC, -LWG, and -SWG and compare the wastegate orientation and bracket on stock units to find the correct turbo. Refer to the Notes section for additional information.
Not Yet Reviewed
$1,699.00
$1,444.15
On Sale
Edelbrock E-Force GM truck and SUV Stage 1 Street Legal supercharger kits up the power in your late model GM truck or SUV. These GM Supercharger systems are specially designed for each application and will allow you to boost your towing performance to impressive levels. These systems feature long intake runners for maximum low end torque making them ideal for towing and off-road performance applications.
( 5 )
$7,931.95
—
$10,803.95
$7,138.76
—
$9,723.56
On Sale
Edelbrock E-Force universal supercharger systems are designed for engine swaps into street rods and muscle cars. They feature 12 in. long runners for maximum low-end torque and great drivability. They're capable of an incredible 600+ flywheel horsepower and 550+ lbs.-ft. of torque. If you're looking for a supercharger system for your hot rod to provide instantly reliable horsepower with low boost for minimum stress on your engine, look no further than an Edelbrock E-Force universal supercharger system—exactly what you need for your engine swap project. Order the model recommended for your year/make and engine application. Edelbrock E-Force universal supercharger systems include the following components: * Supercharger manifold assembly * Cast aluminum tensioner/idler bracket * Cast aluminum engine valley tray * Heavy-duty automatic belt tensioner * Dual, high-capacity, bar and plate, intercoolers * High-flow 95mm mass airflow sensor housing * Extruded aluminum fuel rails with -6 AN lines * Custom-molded intercooler hoses with quick-connect fittings * Electric intercooler water pump * Intercooler recovery tank * Fuel injectors * Steel idler pulleys with heavy-duty, high-speed bearings * High-flow conical air filter * Edelbrock aluminum engine covers * Plug and play, electrical harness, installation hardware * 3.5 in. supercharger pulley
Not Yet Reviewed
$7,658.95
—
$8,766.95
$6,893.06
—
$7,890.26
On Sale
Now you can get more power for your Pentastar equipped JK! These all-new Edelbrock E-Force Jeep Wrangler supercharger kits are designed exclusively for the Pentastar 3.6L V6 engine. They'll increase torque for improved towing and off-road performance when you need it the most, while retaining great daily driving manners. The superchargers have been designed from the ground-up, and utilize the Eaton Gen VI 1320 TVS rotor assembly for maximum efficiency in a compact package. The manifold assembly also features a dual-pass intercooler for reduced air temperature. Edelbrock E-Force Jeep Wrangler Supercharger Kits have great looks, as well, black powdercoated with machined highlights for durability and a unique appearance to give your engine compartment a distinctive look. Here are a few more Edelbrock E-Force Jeep Wrangler supercharger kit features: * Exclusive design fits under the stock hood * Bolt-on installation * Self-contained oil system with 100,000 mile service interval (no drilling or plumbing required) * Electronic PCM programming module with application-specific tuning * Integrated bypass valve for minimal decrease in fuel economy
( 2 )
$6,772.95
—
$8,025.95
$6,095.66
—
$7,223.36
On Sale
Edelbrock E-Force Colorado/Canyon Stage 1 street-legal supercharger kits are exclusively tailored to boost the performance of your popular midsized truck. If you opted for the "best in class" horsepower of the V6, but wish you had more towing capability and torque, these kits allow you to have the best of both worlds with 340 hp and 303 ft.-lbs. of torque. Each of these E-Force superchargers increases the V6's engine power output by 24 percent and are designed to fit under your stock Colorado/Canyon hood--with no modifications. Special features of these Edelbrock E-Force Stage 1 supercharger kits: * Eaton R1740 rotor assembly with an integrated air-to-water intercooler core and front-mount heat exchanger for low inlet air temperature and increased power * Durable black powdercoat finish that blends nicely into the engine compartment * Integrated bypass valve for maximum fuel efficiency * True bolt-on installation with no modification to stock hood or body * Self-contained oiling system with a 100,000 mile service interval * 3-year/36,000 mile powertrain warranty coverage, when applicable * Full-color step-by-step instructions
( 5 )
$6,152.95
—
$6,939.95
$5,537.66
—
$6,245.96
On Sale
Edelbrock E-Force Corvette C6 stage 1 street-legal supercharger kits are exclusively tailored to boost your performance. The unique features on these kits are 12 in. long intake runners that allow for maximum low-end torque. Plus, these Edelbrock E-Force street legal supercharger kits fit under the stock hood with no modifications.
( 3 )
$9,477.95
—
$10,215.95
$8,530.16
—
$9,194.36
On Sale
Edelbrock E-Force Camaro V6 Stage 1 street legal supercharger kits are exclusively tailored to transform your Camaro into a force to be reckoned with! If you opted for the fuel efficiency of the V6, but wish you had more horsepower and torque, these kits allow you to have the best of both worlds—with 376 hp and 319 lbs.-ft. of torque at the rear wheels. The superchargers are available with or without a tune. Special product features: * Eaton R1740 rotor assembly with an integrated air-to-water intercooler core and front-mount heat exchanger for low inlet air temperature and increased power * Durable black powdercoat finish that blends nicely into the engine compartment * Integrated bypass valve for maximum fuel efficiency * True bolt-on installation with no modification to stock hood or body * Self-contained oiling system with a 100,000 mile service interval * 3-year/36,000 mile powertrain warranty coverage, when applicable * Full-color step-by-step instructions
( 1 )
$6,152.95
—
$7,042.95
$5,537.66
—
$6,338.66
On Sale
Edelbrock E-Force Mustang Stage 1 Street Legal supercharger kits transform your Mustang into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 degrees of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. These Mustang supercharger systems are exclusively designed to provide instant, reliable and safe horsepower for a stock Mustang with low boost for minimum stress on the engine. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.
( 2 )
$7,296.95
—
$9,396.95
$6,567.26
—
$8,457.26
On Sale
Does your HEMI equipped Challenger, Charger, Magnum, 300, or RAM Truck need more power? Then equip your ride with an Edelbrock E-Force Chrysler Stage 1 street legal supercharger system—the most efficient supercharger on the market for the popular Chrysler 5.7L, 6.1L, and 6.4L HEMI engines. These complete supercharger systems provide maximum flow, minimum temperature rise, quiet operation and reliability only the Edelbrock name can guarantee. They feature minimum air restriction in and out of the supercharger for optimal flow; and they include individual 7 in. long intake runners that allow for maximum low-end torque and great drivability. These systems are also available in a Stage 3 Pro Tuner system based on the Stage 1 system, but paired down to the essential components for your custom race builds. Order the model recommended for your application. Optional supplemental warranties are available (Stage 1 only) to give you peace of mind when installing an Edelbrock supercharger system on your brand new vehicle.
( 4 )
$9,189.95
—
$10,598.95
$8,270.96
—
$9,539.06
On Sale
Give your Ram truck more towing power with our new E-Force Stage 1 street legal supercharger systems. This complete supercharger system provides maximum flow, minimum temperature rise, quiet operation and reliability. It features minimum air restriction in and out of the supercharger for optimal flow and performance. The individual 7 in. long intake runners allow for maximum low end torque for towing and off-road applications while maintaining great daily driving manners.
( 4 )
$9,096.95
$8,187.26
On Sale
APR DTR8868 turbocharger systems are direct replacements for the EA839 3.0L turbo engine. These upgrades include matching software for various vehicles and mods, providing up to 620 hp (571 AWHP) and 422 lbs.-ft. of torque (572 AWT), depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the S4, S5, and SQ5 platforms with fueling upgrades. For dedicated race cars, the turbocharger is designed with plenty of headroom to go even further on your own. The APR Stage 3 software is designed to avoid hard-spiking in the lower RPM band or running on the edge of what the factory rods and pistons should handle. Particular attention was paid toward component protections for exhaust gas temperature (EGT), back pressure safety (EMAP), turbocharger discharge temperatures, and fueling system capabilities. As rising exhaust gas temperatures require more fuel, the system will lower lambda to cool EGT without taxing the injection system with excessive on-times. Secondary protections will limit output for safety. The HPFP software helps increase headroom without over-driving the pressure to the injection system. The need for limiting power under extreme prolonged use (like tracking the vehicle), is greatly reduced, and the optional upgraded HPFP dramatically increases ethanol output. Note: Specific software is required to use this system, and an upgrade from lower stage systems is included for various vehicles. Software compatibility must be checked before purchase as the software installs to your vehicle's factory ECU. Currently, software can only be installed by an authorized APR dealer. Software is available in two formats: for use with the stock HPFP or for use with the APR HPFP. Additional APR DTR8868 turbocharger systems features, items, and specifications include: * Does not require a core and no additional downtime * Designed to bolt to factory location with factory-style connections * German dual ceramic ball bearing center section eliminates failure-prone journal bearing design * Smooth and reliable operation with a better transient response * Upgraded compressor cover with matching A/R * Larger aircraft-grade, 6061 billet aluminum 88mm compressor wheel * Turbine housing cast with high-temperature 310 stainless steel * Turbine A/R matched to nickel-based super-alloy K418 high-flow 54mm turbine wheel * Each rotating group is VSR (vibration sort rig) balanced for reliable operation * Includes complete turbocharger with a calibrated wastegate actuator and diverter valve * All necessary single-install hardware, gaskets, and clamps * Intake system adapter provides maximum flow-through as optional upgrade for factory intake * ECU software upgrade designed for factory engine and remains emissions-compliant * Supports 91, 93, 100, and 104 AKII, and E60-E85 in North America * Supports 95, 98, 104, 108 RON, and E60-E85 everywhere else * Integrated DV (Diverter Valve) port with OEM DV included
Not Yet Reviewed
$3,299.95
$2,968.95
On Sale
Bigger is better. Dinan high performance heat exchangers, with their larger stature, elicit increased efficiency, plus twice the effectiveness of your stock setup. Impressive power gains and a wider power band, along with astounding cooling characteristics, nearly guarantee that "heat soak" is a thing of the past. Benefits of the Dinan high performance heat exchangers: * Consistent +10 hp/+20 lbs.-ft. of torque on the stock engine tune. Additional gains realized when used in conjunction with the Stage 3 DinanTronics performance tuner. * 60 percent more core volume and 19 percent more face area than stock * 40mm thick Dinan cooler vs. 24mm thick stock cooler * An average of 9 degrees water temperature reduction to the intercooler across the rpm range. Colder water improves intercooler efficiency and allows the intake air to be cooled on average by an additional 6 degrees across the rpm range compared to stock. * Significant reduction in tendency to heat soak * Rubber-mounted for vibration isolation * Track-tested to ensure consistent performance under extreme conditions
Not Yet Reviewed
$549.95
$493.95
On Sale
Lower restriction plus increased airflow, multiplied with horsepower and torque, equals AEM Induction intercooler charge pipes! The pipes feature free-flowing, mandrel-bent, powdercoated aluminum tubes to replace your restrictive factory intercooler piping. The aerodynamic AEM charge pipes are engineered to reduce turbocharged air pressure loss, as well as dramatically increase airflow, allowing your turbocharger to spool up quicker. This perfect equation produces noticeable horsepower gains, plus improved acceleration and drivability. Depending on the pipe chosen, your charge pipes will allow for the use of aftermarket bypass or blow-off valves, or will feature ports that accommodate water-methanol or nitrous oxide injection kits. Both are compatible with AEM air intakes and deliver under-the-hood style. The right formula for performance and power comes in AEM Induction intercooler charge pipes. All intercooler pipes include the AEM lifetime limited warranty.
Not Yet Reviewed
$262.99
$212.99
On Sale
Do you need more power? Bolt on Edelbrock E-Force supercharger kits and give your stock F-150 a big boost of Edelbrock power. These systems are exclusively designed for each application and will allow you to increase your performance with impressive horsepower and torque. These 50-state legal systems feature an Eaton Gen VI supercharger rotating assembly seamlessly integrated into the intake manifold and uniquely oriented, allowing for amazing intake runner length and low-end torque. They're ideal for towing and off-road performance. Give your workhorse the boost it deserves--bolt on made-in-America Edelbrock E-Force supercharger kits.
( 5 )
$7,958.95
—
$9,572.95
$7,163.06
—
$8,615.66
On Sale
Edelbrock E-Force TVS2300 Mustang Stage 2 track system supercharger kits will transform your Mustang into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS2300 supercharger rotors, featuring a four lobe design with a full 160 degrees of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. They feature minimum air restriction in and out of the supercharger, along with individual long intake runners for maximum low end torque for great off throttle performance. Claim the track with the added influence of these E-Force supercharger kits from Edelbrock.
Not Yet Reviewed
$8,204.95
$7,384.46
On Sale
APR DTR6054 turbocharger systems are direct replacements for the EA888 Gen 3 engine. These upgrades include matching software for various vehicles and mods, providing up to 491 hp and 425 lbs.-ft. of torque, depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the Golf R, S3, and TT S platform with fueling upgrades. For dedicated race cars the turbocharger is designed with plenty of headroom to go even further on your own! Designed and developed from the ground up by APR, DTR6054 turbochargers do not require a core and there's no additional downtime. They are built using an aluminum anti-surge compressor cover with appropriate A/R matched to a larger aircraft-grade, 6061 billet aluminum 60mm compressor wheel, a turbine housing cast with high-temperature 310 stainless steel to take the heat and abuse seen on a road course, and a nickel-based superalloy K418 high-flow 54mm turbine wheel. A German dual ceramic ball bearing center section provides smooth and reliable operation with a better transient response, eliminating the factory failure-prone journal bearing design. Each kit includes the complete turbocharger with compressor inlet pipe, compressor outlet hose, T-bolt clamps, gaskets, O-rings, exhaust ring, exhaust V-band, exhaust manifold gasket, studs, bolts, and washers, oil and coolant line O-rings, and APR's ECU upgrades for select vehicles. The upgrade uses your factory electronic wastegate and diverter valve, and connects to your factory exhaust, intake, turbo outlet pipe, and oil and coolant lines. Tested at various road courses, APR's DTR6054 turbocharger systems do not spike torque hard or run on the edge of what the factory rods and pistons have been known to handle, making them as safe on the stock engine as possible for these power levels. Additional features: * Over 30 percent compressor flow compared to the factory turbocharger * Various software levels depending on fueling modifications, including stock fueling * Supports 91, 93, 100, and 104 AKI in all configurations * Supports E60-E85 with fueling upgrades (Golf R/S3/TT S platform only) * VSR balanced turbocharger center housing rotating assembly (CHRA) for reliable operation * Oversized cast turbo inlet pipe connects directly to factory or upgraded intake system * Machined turbocharger speed sensor port with included billet block-off plug * Silicone discharge hose with APR EZ-flow stepped lips included (no turbo muffler) * Integrated diverter valve (DV) port * Available in turbo kit only, turbo kit with low- and high-pressure fuel pump, or turbo kit with low- and high-pressure fuel pump and multi-port injection
Not Yet Reviewed
$2,099.95
$1,888.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
