Availability
Showing In Stock Items. Show All 19 Items.
On Sale
BD Diesel exhaust manifold turbo adapters are an inexpensive alternative to replacing the manifold. These adapters allow for quicker changes back and forth between different turbo mounts without changing the manifold. For quick changes of your turbo head units BD Diesel has you covered.
( 1 )
$144.95
$130.46
On Sale
Holley boost control solenoids are designed for optimal performance when using the boost control function of Holley EFI. Some setups require two solenoids and some require one. They're driven by a Pulse Width Modulated (PWM) output of the ECU. It is advised NOT to use the PWM+ outputs on a Holley HP ECU, but rather use the PWM- outputs. If you have a Holley Dominator ECU, use either the PWM- outputs or a PWM+ output on the J2B connector.
( 4 )
$449.95
$403.95
On Sale
Increase the horsepower in your Cummins with a BD Diesel Iron Horn Cummins turbo kit. These packages are available for a variety of specific year, make, model, and engine applications. Features and benefits include: * Increased airflow for more power, response, and reliability * Replace your factory turbo with a 300 Series SX-E BorgWarner T4 flange turbo * Includes a BD Performance Plus exhaust manifold and gaskets * No extra piping required; turbo drops into place for an easy, clean installation
( 1 )
$2,094.00
—
$2,169.00
$1,884.60
—
$1,952.10
On Sale
Summit Racing™ turbocharger replacement kits are engineered packages with upgraded components needed to replace your high-mileage stock turbos. These one-click kits give you what you need to do the job correctly and address some of the shortcomings of the factory system. Check out the features below: * Brand new direct-fit turbos * Cast stainless exhaust manifolds improved flow and durability * Inconel manifold studs and stainless hardware kit * MLS stainless gaskets * Improved coolant line kits
Not Yet Reviewed
$2,441.92
$2,299.99
On Sale
Turbosmart Gen-V Pro-Gate electronic wastegates feature a Gen-V wastegate body, so you can be confident the mounting orientation will match your existing manifold and outlet hardware. Built on the successful class leading Gen-V Comp-Gate 50 architecture, these units have stellar flow capacity and heat handling characteristics, as well as unparalleled control. There are no springs or hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone are minimum boost levels associated with base spring pressure or heat related issues with hoses. If your manifold priority is good enough, you can set your boost anywhere from zero up to "all of it" from a laptop or tuning interface. Additional features: * Aluminum and cast stainless steel construction * Black anodized finish on top cap * Nitronic 40 valve guide and high-temperature 347 SS body * Liquid cooled, electronic actuator * Strap-type V-band clamps * 1/8 in. NPT * User adjustable actuator position * Onboard analog 0-5 V wastegate position sensor * Onboard analog 0-5 V actuator temperature sensor
Not Yet Reviewed
$1,128.95
$903.16
On Sale
Turbosmart Gen-V Comp-Gate electronic wastegates are built on the successful, class leading Gen-V Comp-Gate 40 architecture. Starting with a Turbosmart Gen-V wastegate body, you can be confident the mounting orientation will match your existing manifold and outlet hardware. The Gen-V Comp-Gate 40 already had class leading flow capacity and heat handling characteristics. There are no springs, no hoses and no boost reference signal, nor any of the limitations associated with any of them. Gone, are minimum boost levels associated with base spring pressure or the heat related issues with hoses. If your manifold priority is good enough, you can set boost anywhere from zero up to "all of it" from your laptop or tuning interface. Additional features: * Aluminum and cast stainless steel construction * Black anodized finish on top cap * Nitronic 40 valve guide and high-temperature 347 SS body * Liquid cooled, electronic actuator * Strap-type V-band clamps * 1/8 in. NPT * User adjustable actuator position * Onboard analog 0-5 V wastegate position sensor * Onboard analog 0-5 V actuator temperature sensor
Not Yet Reviewed
$981.95
$785.56
On Sale
Turbosmart Gen-V electronic anti-lag valves are perfect for motorsport and high-performance applications featuring fully electronic actuation, removing the need for the solenoids and tanks of traditional pneumatic systems. They feature a 40mm valve diameter and purpose designed actuator housing. Multiple fittings are also supplied for ease of fitment and fabrication. The fresh air valve allows incoming charged fresh air from the turbo to be diverted safely into the exhaust manifold pre-turbine wheel with throttle at low opening angles. This allows for safer spooling of the turbocharger without potentially damaging the throttle based late combustion event style anti-lag that can induce high engine stresses and break connecting rods. For engineered performance, choose Turbosmart.
Not Yet Reviewed
$1,091.95
$873.56
On Sale
APR DTR6054 turbocharger systems are direct replacements for the EA888 Gen 3 engine. These upgrades include matching software for various vehicles and mods, providing up to 491 hp and 425 lbs.-ft. of torque, depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the Golf R, S3, and TT S platform with fueling upgrades. For dedicated race cars the turbocharger is designed with plenty of headroom to go even further on your own! Designed and developed from the ground up by APR, DTR6054 turbochargers do not require a core and there's no additional downtime. They are built using an aluminum anti-surge compressor cover with appropriate A/R matched to a larger aircraft-grade, 6061 billet aluminum 60mm compressor wheel, a turbine housing cast with high-temperature 310 stainless steel to take the heat and abuse seen on a road course, and a nickel-based superalloy K418 high-flow 54mm turbine wheel. A German dual ceramic ball bearing center section provides smooth and reliable operation with a better transient response, eliminating the factory failure-prone journal bearing design. Each kit includes the complete turbocharger with compressor inlet pipe, compressor outlet hose, T-bolt clamps, gaskets, O-rings, exhaust ring, exhaust V-band, exhaust manifold gasket, studs, bolts, and washers, oil and coolant line O-rings, and APR's ECU upgrades for select vehicles. The upgrade uses your factory electronic wastegate and diverter valve, and connects to your factory exhaust, intake, turbo outlet pipe, and oil and coolant lines. Tested at various road courses, APR's DTR6054 turbocharger systems do not spike torque hard or run on the edge of what the factory rods and pistons have been known to handle, making them as safe on the stock engine as possible for these power levels. Additional features: * Over 30 percent compressor flow compared to the factory turbocharger * Various software levels depending on fueling modifications, including stock fueling * Supports 91, 93, 100, and 104 AKI in all configurations * Supports E60-E85 with fueling upgrades (Golf R/S3/TT S platform only) * VSR balanced turbocharger center housing rotating assembly (CHRA) for reliable operation * Oversized cast turbo inlet pipe connects directly to factory or upgraded intake system * Machined turbocharger speed sensor port with included billet block-off plug * Silicone discharge hose with APR EZ-flow stepped lips included (no turbo muffler) * Integrated diverter valve (DV) port * Available in turbo kit only, turbo kit with low- and high-pressure fuel pump, or turbo kit with low- and high-pressure fuel pump and multi-port injection
Not Yet Reviewed
$2,099.95
—
$3,399.95
$1,888.95
—
$3,058.95
On Sale
Roush 2018-19 5.0L F-150 Phase 1 supercharger kits are an industry-leading calibrated systems. Boosting performance to 650 hp for the 2018-19 Ford F-150 5.0L V8, the Roush 2.65L Phase 1 calibrated supercharger kit is part of the TVS (Twin Vortices Series) line of superchargers developed by Roush Performance, raising the bar for performance and reliability. Eaton's TVS technology rotating assembly delivers more power and better fuel economy in a highly-engineered package and is part of the same line that has been used and proven for years in Roush-built Ford Mustangs. The Roush R2650 TVS supercharger is a roots-type positive displacement supercharger that features twin 4-lobe rotors that are twisted 170 degrees. By comparison, the original Eaton supercharger rotating assembly featured three lobes twisted 60 degrees. The fourth lobe and the added twist, provides a long list of benefits including: greatly enhanced thermal efficiency, higher volumetric capacity, higher operating speeds, a smoother, more efficient flow of air into the engine, and improved noise and vibration characteristics. Unlike turbocharging, the Roush R2650 TVS supercharger provides instant throttle response and can generate increased power through the engine's entire power band. Features include: * Features R2650 rotating assembly along with newly-designed, high-flowing front inlet and outlet ports that greatly enhance thermal and volumetric efficiency across the entire rpm range * Custom, all-aluminum high efficiency intercooler and low temperature radiator along with high-capacity degas bottle provides substantial cooling technology * Increased durability with bigger bearings and thicker timing gears * Fuel charging assembly with Roush-designed upper and lower aluminum intake manifolds * Heavy-duty, first sheave FEAD system reduces stress on the engine * Roush Performance calibration included (to be downloaded using the Roush RDT software) * All necessary installation hardware
( 1 )
$8,199.99
$7,461.99
On Sale
An all-new addition to the Turbosmart lineup is the fresh air Gen-V (Anti-Lag Valve (ALV40) for motorsport applications. They feature a 40mm valve diameter, a purpose-designed actuator housing—and multiple fittings for ease of fitment and fabrication. The anti-lag valve allows for incoming charged fresh air from the turbo to be diverted safely into the exhaust manifold pre-turbine wheel. With the throttle at low opening angles, this allows for safer spooling of the turbocharger—without the potentially damaging throttle-based late combustion anti-lag that can induce high engine stresses and break connecting rods. The ALV is a sealed twin chamber design, with the top port being the primary control port. The spring is designed to open under vacuum conditions to allow for the air to bypass into the exhaust manifold; while the lower chamber is for twin port control methods—to control the valve irrespective of manifold pressure. The shaft seal allows for leak-proof operation.
Not Yet Reviewed
$529.95
$423.96
On Sale
Do you want more power under the hood of your Ford? Roush R2300 Roushcharger kits are just what you need. Featuring a TVS (Twin Vortices Series) supercharger, these kits create big performance with unsurpassed reliability. They also feature 4-lobe rotors and high-flow inlets and outlets for more volumetric capacity at higher rpm to give you serious ground-pounding power. Available in several configurations, depending on your power needs and application, Roush R2300 Roushcharger kits are sure to have your Mustang beating all of the competition and ruling the streets.
Not Yet Reviewed
$7,749.99
$7,052.49
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
