Availability
Showing In Stock Items. Show All 27 Items.
On Sale
Fleece Performance offers Cheetah FMW VNT turbochargers for a variety of diesel trucks to enhance your driving experience. These drop-in replacements come with a Fleece-engineered 63mm FMW compressor wheel and high-flow Cheetah turbine wheel. You'll enjoy the spool-up and throttle response of a small turbo and still get the big top-end power you're looking for. Rated at up to 650 rear wheel horsepower (depending on model), this is the ultimate combination for dual-purpose applications. If you're towing during the week and sled pulling on the weekend, the 63mm FMW VNT Cheetah is just the ticket. Order the turbo model recommended for your vehicle. Additional details: * Stock appearing: Uses the stock housings with updated internals. This allows you to keep all factory systems intact, yet enables you to safely run 40 psi of boost. No aftermarket components or modifications needed for installation. * Proven Technology: Built with genuine Garrett Turbocharger parts. They feature upgraded shaft bearings and 360 degree thrust bearings. * Powerful Yet Responsive: Turbochargers spool like stock, thanks to the variable nozzle technology (VNT) which allows the turbo to act smaller upon spool-up and then open up to flow more exhaust on the top end. * Exclusive FMW wheel technology: – Forged milled wheels – Faster spool-up – Increased throttle response – Broader torque curve
( 2 )
$1,979.00
—
$2,649.00
$1,682.15
—
$2,251.65
On Sale
APR intercooler systems result in repeatable performance—even in the most demanding of situations. These massive front-mounted upgrades dramatically reduce intake air temperature (IAT), minimize heat soak, and provide increased performance in easy-to-install, direct bolt-on designs. The superior effectiveness and performance of APR systems is focused around core selection, end tank design, and specific install location for each application. Balancing all the necessary characteristics, APR's engineers perfected units with exceptional cooling and lowered pressure loss across the core, while maintaining critical airflow to components behind the system—delivering maximum performance and far exceeding the capabilities of factory intercoolers. Features may include: * Aluminum construction * Large bar-and-plate design with densely packed staggered and louvered fins * Smooth cast aluminum end tanks engineered for low turbulence/restriction and maximum flow * Pressure tested to prevent power robbing boost leaks * Full directions and APR world-renowned customer support * Some systems may include CNC-bent and TIG-welded mounting brackets, high-quality multi-ply silicone inlet and outlet hoses, T-bolt clamps, and billet MAP sensor housings
Not Yet Reviewed
$999.95
—
$2,199.95
$898.95
—
$1,978.95
On Sale
Put the finishing touches on your truck with high-quality Fleece Performance turbo drain tube kits. The tubes are braided stainless steel for durability on the exterior, and reinforced with rubber tubing for flow and maximum flexibility. The kits contain everything you need to connect an S300/S400 turbo drain back to the factory drain location on the Cummins block when using a fixed vane geometry turbo. Kit contains: * Drain tube (20 in. end-to-end) * Cummins turbo drain tube adapter * Turbo drain flange adapter * Turbo drain gasket * 7/8 in.-14 to -10 AN fitting * Two 3/8in.-16 flange head bolts * Two 10mm x 1.5 flange head bolts
( 3 )
$99.95
$84.96
On Sale
Put the finishing touch on your truck by easily connecting the turbo to the factory drain location on your Cummins block with high quality Fleece Performance drain tube adapters.
( 3 )
$19.99
$16.99
On Sale
Edelbrock E-Force C7 Stage 1 Street Legal Corvette supercharger systems are for those of you who don't believe 460 hp from the factory is enough! These systems are designed with the same precision as the new Corvette, making them the perfect forced induction solution for your C7. Best of all, E-Force superchargers fit under the stock hood with no modifications, allowing you to retain the factory look of this highly engineered masterpiece. Take your Corvette to the next level of power with Edelbrock E-Force C7 supercharger kits!
Not Yet Reviewed
$10,159.95
—
$10,165.95
$9,143.96
—
$9,149.36
On Sale
K&N charge pipes are made of free-flowing, mandrel-bent aluminum tubes designed to replace the restrictive factory intercooler piping on specific turbo charged vehicles and offer a wide range of performance customization options. K&N charge pipes are engineered to reduce turbo charged air pressure loss, as well as dramatically increase air flow from the turbo through the intercooler. Constructed from lightweight aluminum with a durable gunmetal gray powder coated finish, the charge pipes are easy to install with commonly available tools and they are backed by K&N's 10-year/million-mile limited warranty.
( 2 )
$314.99
—
$629.99
$264.99
—
$579.99
On Sale
APR DTR8868 turbocharger systems are direct replacements for the EA839 3.0L turbo engine. These upgrades include matching software for various vehicles and mods, providing up to 620 hp (571 AWHP) and 422 lbs.-ft. of torque (572 AWT), depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the S4, S5, and SQ5 platforms with fueling upgrades. For dedicated race cars, the turbocharger is designed with plenty of headroom to go even further on your own. The APR Stage 3 software is designed to avoid hard-spiking in the lower RPM band or running on the edge of what the factory rods and pistons should handle. Particular attention was paid toward component protections for exhaust gas temperature (EGT), back pressure safety (EMAP), turbocharger discharge temperatures, and fueling system capabilities. As rising exhaust gas temperatures require more fuel, the system will lower lambda to cool EGT without taxing the injection system with excessive on-times. Secondary protections will limit output for safety. The HPFP software helps increase headroom without over-driving the pressure to the injection system. The need for limiting power under extreme prolonged use (like tracking the vehicle), is greatly reduced, and the optional upgraded HPFP dramatically increases ethanol output. Note: Specific software is required to use this system, and an upgrade from lower stage systems is included for various vehicles. Software compatibility must be checked before purchase as the software installs to your vehicle's factory ECU. Currently, software can only be installed by an authorized APR dealer. Software is available in two formats: for use with the stock HPFP or for use with the APR HPFP. Additional APR DTR8868 turbocharger systems features, items, and specifications include: * Does not require a core and no additional downtime * Designed to bolt to factory location with factory-style connections * German dual ceramic ball bearing center section eliminates failure-prone journal bearing design * Smooth and reliable operation with a better transient response * Upgraded compressor cover with matching A/R * Larger aircraft-grade, 6061 billet aluminum 88mm compressor wheel * Turbine housing cast with high-temperature 310 stainless steel * Turbine A/R matched to nickel-based super-alloy K418 high-flow 54mm turbine wheel * Each rotating group is VSR (vibration sort rig) balanced for reliable operation * Includes complete turbocharger with a calibrated wastegate actuator and diverter valve * All necessary single-install hardware, gaskets, and clamps * Intake system adapter provides maximum flow-through as optional upgrade for factory intake * ECU software upgrade designed for factory engine and remains emissions-compliant * Supports 91, 93, 100, and 104 AKII, and E60-E85 in North America * Supports 95, 98, 104, 108 RON, and E60-E85 everywhere else * Integrated DV (Diverter Valve) port with OEM DV included
Not Yet Reviewed
$3,299.95
$2,968.95
On Sale
Replace your failure prone rubber hose, plastic pipe, and worm clamps with one of these APR charge pipe and hose kits. APR offers the charge pipe and hose kits as a comprehensive upgrade for the 2.0T EA888 Gen 4 engine that addresses each component between the turbocharger and intercooler, and from intercooler to throttle body. This system increases air flow through smooth an uninterrupted airflow paths, and provides increased performance, turbocharger sound, and reliability by upgrading each of the factory components. Kits do vary, and each kit is comprised of multiple components otherwise sold on their own, which in turn saves you time and money. Order the kit designed to fit your application needs. Charge hose features: * Direct replacement parts * Increases performance through smooth airflow paths and reduced boost leak points * Multi-Ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish * Emissions friendly Charge pipe features: * Direct replacement parts * Increases performance through smooth airflow paths and reduced boost leak points * Strong aluminum pipes that resist cracking and melting like OEM components * Billet aluminum meth/sensor bung with NPT tap (TB inlet pipe) * Billet aluminum MAP sensor bungs (TB inlet pipe) * Removes the restrictive and failure prone throttle body inlet internals (TB inlet pipe) * No-slip bead rolled pipe ends * TIG-welded mounting brackets * Full 60mm setup * Satin black finish * Emissions friendly Turbo muffler pipe and hose features: * Direct replacement parts * Complete system replaces the factory turbo muffler and outlet hose * Increases outlet cross sectional area 66 percent by replacing both parts * Reduces outlet restriction * Increases performance through increased size, smooth airflow paths, and reduced boost leak points * Enhanced turbocharger sound * Faster turbocharger spool with better power delivery * CNC-machined billet aluminum muffler pipe * Integrated PCV vent path * Satin black finish on the turbo muffler pipe * Multi-ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish on the hose * Emissions friendly
Not Yet Reviewed
$799.95
$324.95
On Sale
APR DTR6054 turbocharger systems are direct replacements for the EA888 Gen 3 engine. These upgrades include matching software for various vehicles and mods, providing up to 491 hp and 425 lbs.-ft. of torque, depending on vehicle platform and fueling, all while keeping emissions components unmodified. The software supports premium pump fuel grades, race fuel grades, and even ethanol on the Golf R, S3, and TT S platform with fueling upgrades. For dedicated race cars the turbocharger is designed with plenty of headroom to go even further on your own! Designed and developed from the ground up by APR, DTR6054 turbochargers do not require a core and there's no additional downtime. They are built using an aluminum anti-surge compressor cover with appropriate A/R matched to a larger aircraft-grade, 6061 billet aluminum 60mm compressor wheel, a turbine housing cast with high-temperature 310 stainless steel to take the heat and abuse seen on a road course, and a nickel-based superalloy K418 high-flow 54mm turbine wheel. A German dual ceramic ball bearing center section provides smooth and reliable operation with a better transient response, eliminating the factory failure-prone journal bearing design. Each kit includes the complete turbocharger with compressor inlet pipe, compressor outlet hose, T-bolt clamps, gaskets, O-rings, exhaust ring, exhaust V-band, exhaust manifold gasket, studs, bolts, and washers, oil and coolant line O-rings, and APR's ECU upgrades for select vehicles. The upgrade uses your factory electronic wastegate and diverter valve, and connects to your factory exhaust, intake, turbo outlet pipe, and oil and coolant lines. Tested at various road courses, APR's DTR6054 turbocharger systems do not spike torque hard or run on the edge of what the factory rods and pistons have been known to handle, making them as safe on the stock engine as possible for these power levels. Additional features: * Over 30 percent compressor flow compared to the factory turbocharger * Various software levels depending on fueling modifications, including stock fueling * Supports 91, 93, 100, and 104 AKI in all configurations * Supports E60-E85 with fueling upgrades (Golf R/S3/TT S platform only) * VSR balanced turbocharger center housing rotating assembly (CHRA) for reliable operation * Oversized cast turbo inlet pipe connects directly to factory or upgraded intake system * Machined turbocharger speed sensor port with included billet block-off plug * Silicone discharge hose with APR EZ-flow stepped lips included (no turbo muffler) * Integrated diverter valve (DV) port * Available in turbo kit only, turbo kit with low- and high-pressure fuel pump, or turbo kit with low- and high-pressure fuel pump and multi-port injection
Not Yet Reviewed
$2,099.95
$1,888.95
On Sale
Lower restriction plus increased airflow, multiplied with horsepower and torque, equals AEM Induction intercooler charge pipes! The pipes feature free-flowing, mandrel-bent, powdercoated aluminum tubes to replace your restrictive factory intercooler piping. The aerodynamic AEM charge pipes are engineered to reduce turbocharged air pressure loss, as well as dramatically increase airflow, allowing your turbocharger to spool up quicker. This perfect equation produces noticeable horsepower gains, plus improved acceleration and drivability. Depending on the pipe chosen, your charge pipes will allow for the use of aftermarket bypass or blow-off valves, or will feature ports that accommodate water-methanol or nitrous oxide injection kits. Both are compatible with AEM air intakes and deliver under-the-hood style. The right formula for performance and power comes in AEM Induction intercooler charge pipes. All intercooler pipes include the AEM lifetime limited warranty.
Not Yet Reviewed
$262.99
$212.99
On Sale
Summit Racing™ turbocharger replacement kits are engineered packages with upgraded components needed to replace your high-mileage stock turbos. These one-click kits give you what you need to do the job correctly and address some of the shortcomings of the factory system. Check out the features below: * Brand new direct-fit turbos * Cast stainless exhaust manifolds improved flow and durability * Inconel manifold studs and stainless hardware kit * MLS stainless gaskets * Improved coolant line kits
Not Yet Reviewed
$2,441.92
$2,299.99
On Sale
APR carbon fiber intercooler ducts for the Porsche 992 3.0T dramatically lower intake air temperature (IAT) by increasing airflow through the ambient air path of the intercooler cores. In doing so, the engine makes more power and sustains power levels for longer—as IAT is kept away from the knock threshold of the engine and IAT-based power reduction safety routines of the factory ECU. Multiple back-to-back wide-open-throttle acceleration tests proved APR intercooler ducts reduced IAT as much as 9.6 degrees C (17.3 degrees F) or 15 percent better than stock! The APR intercooler ducts are made from carbon fiber, allowing the cooling ducts to be formed to the exact shape necessary to fit into the tight engine bay within the 992's rear-end. The vents allow for maximum flow through the system, while continuing to connect the system to the rest of the factory ducting. Everything simply slides into place with no extra hardware required. A gorgeous matte finish with a gloss APR logo adorns the system, giving it a motorsport-inspired feel, which is unfortunately tucked out of view with the rear bumper installed. Testing: The 911 must be tested on the street, rather than a dyno, to capture real world cooling data. This is especially true because of the rear engine design. In real world driving, air is forced through the cooling ducts differently than it is on a stationary dyno, even with excellent cooling fans. During development, APR engineers fully instrumented the engine to find the limitations of the factory hardware. It was quickly determined the factory intercoolers struggled with airflow through the ambient cooling paths. By redesigning the cooling ducts, more high-pressure ambient air could be forced through the system to maximize effectiveness of the coolers. To illustrate their importance, wide open throttle acceleration tests were conducted for roughly 11 seconds, both with stock cooling ducts and APR cooling ducts. IAT was measured post-intercooler with high-quality thermocouples. Ten back-to-back tests were conducted with each setup, and the results were averaged together. With the stock ducts in place, IAT rose to 66.2 degrees C (151.2 degrees F). This is above the factory knock threshold of 60 degrees C (140 degrees F) and is approaching the ECU power reduction limiter at 70 degrees C (158 degrees F). Once this IAT threshold is crossed, the ECU will begin aggressively reducing engine power to protect the engine. By simply swapping to the APR intercooler ducts, IAT dropped 15 percent, or 9.6 degrees C (17.3 degrees F), leveling off at 56.6 degrees C (133.9 degrees F). This is below the knock threshold and safely away from the power reduction threshold! APR Intercooler ducts are a simple and cost effective upgraded to the 992 3.0T and should be considered by any customer, at any stage of performance, looking to maximize the performance of their 911! Product features: * Improved intake air temperature (IAT) by 15 percent over stock * Organic matte carbon fiber design with gloss APR logo * Lightweight material and design * No extra hardware required * Plug-and-play upgrade * Retains factory intercooler post-housing ducting * Excellent performance per dollar upgrade for the Porsche 911 * Emissions compliant
Not Yet Reviewed
$699.95
$384.95
On Sale
APR intercooler hoses replace the factory rubber hoses and worm-gear clamps with high-quality multi-ply silicone hoses and strong Clampco T-bolt clamps. The interior of the hoses are smooth and lined with a Fluorosilicone material designed to resist oil degradation and extend component life. EZ-Flow stepped lips within the hoses allow for a smooth connection from hose to pipe for uninterrupted airflow. APR pays close attention to the airflow path and provide as few bends and tight radius turns as possible. Furthermore, the hose material adheres to its mating surface under high temperature to help create a stronger leak and slip free connection. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. Features: * Direct replacement parts * Hoses are compatible with both OEM and upgraded APR charge pipes and intercoolers * Increases performance through smooth airflow paths and reduced boost leak points * Multi-ply silicone hose construction resists swelling and tearing * Fluorosilicone interior hose surfaces for oil degradation resistance * Strong Clampco T-bolt clamps for a secure high-boost connection * EZ-Flow stepped interior lips for a smooth airflow path * Full 60mm setup * Black finish * Emissions friendly
Not Yet Reviewed
$173.95
$49.95
On Sale
Dinan Big Turbos are the ultimate upgrades for racing enthusiasts to fully maximize the power output of your engine. The compressor wheel inside the turbocharger is increased in size enabling additional boost pressures, and thus increased horsepower at higher engine speeds--all while retaining efficiency. These are with an upgraded thrust system to ensure reliable and prolonged life. They are available as brand new units with a new stock turbine custom cast and manufactured, or as rebuilt factory units machined to Dinan specifications. Both come with an upgraded thrust system to ensure reliable, prolonged life. Dinan Big Turbos feature: * Larger billet compressor/impeller wheel that allows 30 percent greater flow over stock which then enables additional boost to be realized while retaining efficiency. * Dinan Installation instructions detail a procedure which is quicker than BMW's turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only). * Includes O-rings and gaskets needed for complete installation on a RWD vehicle only.
Not Yet Reviewed
$1,799.95
$1,618.95
On Sale
APR boost hose systems deliver the ultimate, direct-replacement upgrade for your factory hoses. Optimized to minimize boost leaks, reduce turbulence and other performance degradations, the 4-ply silicone provides thickness and strength characteristics necessary to support boost levels far beyond the engine's capabilities. The hoses are designed with APR's EZ-Flow stepped design for increased airflow—and they added a fluorosilicone internal lining to ensure the hoses do not rapidly deteriorate over time when exposed to oil and gasoline from PCV and EVAP systems. Stainless steel Clampco T-bolt clamps prevent the hoses from coming loose under heavy pressure; and under high temperatures, the silicone adheres to its mating surface, further minimizing leaks and hose slippage. APR boost hose systems are a great solution that directly replaces your factory rubber hoses for maximum performance, longevity, and insurance against power-robbing boost leaks. Order the kit recommended for your vehicle.
Not Yet Reviewed
$324.95
$292.45
On Sale
APR turbo outlet pipes replace the factory plastic pipe with a high-quality aluminum pipe that is a constant diameter within. APR pays close attention to the airflow paths and provide as few bends and tight radius turns as possible to maximize performance. Unlike the factory plastic pipes, APR's won't melt and crack under extreme conditions. This direct replacement piece additionally deletes the turbo muffler, which is integrated into the pipe on the Golf R/S3 and similar platform vehicles. The pipe features bead rolled connection points to resist hose slippage, and all mounting brackets are TIG-welded to the pipe for a strong connection. Finally, the pipe is finished in an attractive satin black finish. This all results in a more reliable setup and increased performance through a smooth and strong uninterrupted airflow path. Plus, these hoses are compatible with both OEM and upgraded APR charge hoses.
Not Yet Reviewed
$209.95
$99.95
On Sale
APR Coolant Performance Systems are massive, front-mounted intercooler upgrades that dramatically reduce intake air temperature, minimize heat soak, and provide increased performance. They're up to 140 percent larger than the stock unit and feature a self-bleeding cooling circuit to ensure continual peak operating performance. The systems are easy to maintain and fully integrated into the factory cooling circuit. This upgrade is highly recommended at every stage. Order the model designed for your vehicle application.
Not Yet Reviewed
$1,499.95
$1,348.95
On Sale
Eliminate the installation headaches associated with non-flexible OE drain lines with Fleece Performance silicone turbo drain tube kits. Each kit features a larger inner diameter, smooth silicone hose for longevity and durability, and black anodized billet aluminum flange with integral O-ring for leak-free performance. Fleece's patent pending drain hose simplifies turbocharger installation and will ensure proper oil drainage from your turbocharger. Kits include new fasteners and are designed for use with all Cummins equipped Dodge Ram factory-style turbochargers, VGT or HX35 and HY35-style turbochargers, as well as aftermarket drop-in replacements, like Fleece's Cheetah Series. Choose the turbo drain line kit designed for your Cummins.
( 3 )
$94.99
$80.74
On Sale
Dinan intercoolers elicit impressive power gains and a wider power band, along with astounding cooling characteristics—nearly guaranteeing that "heat soak" is a thing of the past. Heat robs power, and greater power gains are achieved with a larger high performance intercooler. Dinan intercoolers provide a major increase in face area, along with an equally impressive increase in volume—substantially reducing the pressure drop to 0.8 psi, as well as providing for more efficient heat exchange and more consistent output power. The core design allows two separate cores to be working in conjunction with one another at all times. This doubling of resources is directly responsible for the huge improvement in the delta from charge air temperature to ambient temperature. "Cool down" time is also reduced, enabling your car to produce full power under varying driving conditions such as stop and go traffic. This leaves the chances of being susceptible to heat soak nearly non-existent. The systems have been engineered to be as direct a replacement as possible to the stock units, requiring only minor modifications for a clean, factory-like installation. The increased thermal efficiency provided by the Dinan intercoolers will also enhance turbocharger reliability in addition to overall power.
Not Yet Reviewed
$999.95
$649.95
On Sale
Edelbrock E-Force supercharger kits use a positive displacement supercharger that is capable of producing over 500 hp. These kits include the supercharger with Eaton internals, a manifold, drive pulleys, a belt, and all necessary items for installation. Edelbrock E-Force superchargers are designed to provide more horsepower per pound of boost than their competitors, from off-idle through the rest of the rpm range. Plus, their internal bypass valve practically eliminates parasitic loss, consuming less than 1/3 of one horsepower at 60 mph. NOTE: They are not compatible with HEI distributors.
( 8 )
$3,644.95
$3,280.46
On Sale
Edelbrock E-Force Camaro SS Stage 3 pro-tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI 2300 TVS supercharger rotating assembly--a seamless design with minimal elements to eliminate problems and increase airflow. The air is kept cool with a high-capacity air-to-water intercooler and a low-temperature heat exchanger. Start your custom-built racer on a winning foundation that's made in America with these Edelbrock E-Force Camaro SS Stage 3 pro-tuner supercharger kits. These systems are for competition racing use only.
( 1 )
$7,508.95
$6,758.06
On Sale
Edelbrock E-Force Corvette C7 Stage 2 Track System supercharger kits transform your C7 Corvette into a force to be reckoned with! The kits utilize Eaton's Gen VI supercharger rotors, featuring the reliability for which Eaton is known. The Stage 2 system includes an intake manifold, pulley, belt and tune for the next step up for your C7. Dominate the track with the added influence of these E-Force supercharger kits from Edelbrock. All 2017 and later Corvette supercharger systems will require the ECM to be sent in for programming.
( 1 )
$10,255.95
—
$10,269.95
$9,230.36
—
$9,242.96
On Sale
Edelbrock E-Force Corvette C7 Stage 3 pro-tuner supercharger kits include all of the essential components that a racer or tuner would need to build a custom supercharged racing setup. They offer the flexibility of choosing the right pulley, cold air intake, etc. for any custom supercharged installation. At the heart of these E-Force supercharger kits is the Eaton Gen VI supercharger rotating assembly--a seamless design with minimal elements to eliminate problems and increase airflow. The air is kept cool with a high-capacity air-to-water intercooler and a low-temperature heat exchanger. Start your custom-built racer on a winning foundation with these Edelbrock E-Force Corvette C7 Stage 3 pro-tuner supercharger kits. These systems are for competition racing use only.
Not Yet Reviewed
$9,051.95
$8,146.76
On Sale
Edelbrock E-Force Camaro SS Stage 1 street legal supercharger kits transform your Camaro into a force to be reckoned with! The kits utilize Eaton's Gen VI TVS supercharger rotors, featuring a four lobe design with a full 160 deg. of twist for maximum flow, minimum temperature rise, quiet operation, and the reliability for which Eaton is known. The Edelbrock E-Force Camaro SS street legal supercharger kits are a complete system that maximizes efficiency and performance by minimizing air restriction into, and out of, the supercharger. The supercharger housing itself is integrated into the intake manifold for a seamless design with minimal components, eliminating the possibility of vacuum leaks between gasket surfaces. The system also utilizes a front drive, front inlet configuration giving it the shortest, least restrictive inlet path on the market. The upper plenum area is enclosed by a top cover that has been designed to provide an appealing and distinctive under-hood appearance. This configuration allows for a compact package that can fit under the stock hood and cowl of the Camaro, without sacrificing runner length, or intercooler area. Edelbrock E-Force Camaro SS street legal supercharger kits provide neck snapping performance that is safe to operate on a completely stock engine. The kits are 50-state emission legal, and come with a 3-year 36,000 mile warranty (restrictions apply) so that there are no worries when installing it on a brand new car. Claim the streets with the added influence of these E-Force supercharger kits from Edelbrock.
( 3 )
$8,739.95
—
$9,286.95
$7,865.96
—
$8,358.26
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
