Availability
Showing In Stock Items. Show All 26 Items.
On Sale
Dual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer Series square bore or Thunder Series AVS carburetors. Dyno tests showed an extra 5 hp and 9 lbs.-ft. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000 to 4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!
( 314 )
$227.95
—
$652.95
$205.16
—
$522.36
On Sale
Edelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.
( 570 )
$216.95
—
$659.95
$195.26
—
$565.16
On Sale
Summit Racing™ induction kit Pro Packs start with the Edelbrock EPS Performer intake manifold, which builds horsepower and torque from idle to 5,500 rpm. Summit Racing™ induction kits also include an Edelbrock 600 cfm Performer carburetor and a 14 in. chrome steel Summit Racing™ air cleaner, plus zinc plated Summit Racing™ carb studs, a Summit Racing™ stainless steel intake bolt kit, and a Fel-Pro Printoseal intake manifold gasket set. These kits are compatible with both the 260 hp and 290 hp versions of this engine and are designed for smooth street performance.
( 23 )
$774.86
$706.98
On Sale
Weiand Street Warrior intake manifolds are designed for use on stock or stroker combinations and more efficient cylinder heads. With new cam designs came the need for Street Warrior intake manifolds to support these combinations. Designed with Computational Fluid Dynamics software, Street Warrior intake manifolds rise to the challenge and deliver the performance to conquer the competition. Do you want maximum horsepower and torque from today's engines? Then choose Street Warrior intake manifolds.
( 140 )
$279.95
—
$499.95
$251.95
—
$448.95
On Sale
Weiand Action Plus intake manifolds are designed for use as stock replacements, with improved power and torque characteristics. They're 180 degree, dual plane types, with a carburetor flange that'll accept either stock or aftermarket performance carburetors. Their effective rpm range runs from idle to 6,000 rpm. With their high-flow runner design and ability to produce increased power with little modification, it's no wonder these manifolds are so popular.
( 65 )
$377.95
—
$412.95
$268.95
—
$340.15
On Sale
Edelbrock Performer RPM LS1 intake manifolds are manifold-only packages that allow you the opportunity to use a carburetor on these originally computer-controlled engines. Edelbrock LS1 intake manifolds are manufactured from aluminum and offer you the ability to maximize torque and increase the power curves of your engine. Are you going back to the traditional carburetor? Rely on Edelbrock Performer RPM intake manifolds.
( 12 )
$407.95
—
$638.95
$367.16
—
$511.16
On Sale
Holley EFI LS single plane mid-rise intake manifolds are great for your higher horsepower engine. Featuring cast aluminum construction, these manifolds are also great for centrifugal blower, turbocharged, or NOS mild power adder applications. The efficient casting design is lightweight--11.5 lbs.--with consistent wall thickness and strong mounting flanges. The optimized runner layout and constant cross sectional area offer a broad torque curve, with the best vehicle performance from 2,500 to 7,000 rpm. The mid-rise design offers minimum carb mounting flange height--without sacrificing power--and is another plus for vehicles with minimum hood modifications. Holley EFI LS single plane mid-rise intake manifolds include zinc-plated hex head cap mounting bolts and washers, pipe plugs to block manifold vacuum and MAP sensor ports, and Viton® O-ring cylinder head mounting flange gaskets for an OEM-style seal.
( 9 )
$479.95
—
$549.95
$430.95
—
$493.95
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$766.85
—
$1,894.62
$698.27
—
$1,811.64
On Sale
Revolutionize the way your engine performs with power-boosting Weiand Track Warrior intake manifolds! Designed for high performance engine applications, they are ideal for mean street machines as well as for competition super-class big block powerplants. They are computer engineered and dyno-proven to produce more horsepower and torque as a result of superior cylinder-to-cylinder distribution, giving the Track Warriors the edge over the competition and ensures safe, consistent air/fuel ratios for your engine. Plus, permanent mold castings provide weight savings of 10 to 20 percent over traditional sand cast pieces while maintaining inform wall thickness for porting. So, when you look for the pinnacle of performance, price and quality, just look to Weiand.
( 26 )
$463.95
—
$549.95
$302.95
—
$493.95
On Sale
Performance Design XS intake manifolds break the mold of existing intake manifold architecture to maximize available space under the hood. When designing the optimum intake runner length and shape, the fuel rail gets in the way—so they moved it—inside the intake manifold! Those billet fuel rails feature an external quick-disconnect near the stock location. Testing proved these models, featuring injection-molded, glass-reinforced nylon construction, made horsepower and torque gains on a stock engine—with increasing gains as the engine got more aggressive with camshaft and exhaust upgrades! Other product features and specifications include: * Modular runners with three staggered lengths for best performance * Forward-facing throttle body flanges (90-101mm, 103mm, and 112mm) * Full assembly can be reversed on the engine * Fits under the cowl hood of a C6 Chevy Corvette * Factory MAP sensor location * PCV and canister purge solenoid OEM connections * Accepts standard EV6 LS3/LS7-style injectors * Injector extension wires pass through sealed grommets * Maximum recommended boost is 20 psi * Carbon fiber center bolt cover * Includes stainless steel hardware for installation * Includes molded port, plenum, and throttle seals
( 1 )
$999.99
$899.99
On Sale
Holley's low-profile intake manifold for Ford's 7.3L Godzilla engine, when paired with a 20-340/20-340BK oil pan and accessory drive kit, allows for easy installation into vintage vehicles, kit cars, and other space-restricted applications while retaining the factory hood. The design focus for these manifolds was equal cylinder distribution and great street manners. The low-profile intake manifolds offer a much cleaner alternative to the original plastic intake; they provide anywhere from 2 to 3.5 in. of additional clearance, will correct the OE throttle body angle by 55 degrees, and increase the opening to 92mm. With three throttle body options, sturdy cast aluminum construction, a removable lower panel, and long runners to maintain the 7.3L's already substantial torque offering, this is a must-have for any Godzilla project. Throttle Body Options: * 1) 1986-1993 5.0L Mustang style drive-by-cable throttle bodies * 2) 2020-2023 7.3L drive-by-wire throttle body * 3) 2020-2023 GT500 drive-by-wire throttle body (requires P/N 300-903) Compatible Engine Components: * 1) Factory accessories as well as Holley accessory drives (except for 20-380 and 97-409) * 2) Factory fuel rails and Holley 534-265 / 534-266 billet rails Intake manifold features: * Lower profile (2+ inches) than the OE intake manifold * Sturdy cast aluminum construction that will hold up to the elements and forced induction * Perfect complement to Holley's Godzilla accessory drive and oiling system (20-320 / 20-320BK / 20-340 / 20-340BK) for fitment into tight engine bays * Removable lower intake panel that can be removed for additional porting, nitrous, etc. * Incorporates long runners for solid low-end torque * Includes throttle body gasket and all necessary O-rings and adapters to mount to the engine * Compatible with OE or Holley accessory drives and OE or Holley fuel rails * Corrects OE throttle body angle by 55 degrees * Available in natural or black powdercoat finish
Not Yet Reviewed
$927.95
—
$949.95
$617.95
—
$834.95
On Sale
Summit Racing™ induction kit Pro Packs have an Edelbrock Performer RPM intake manifold designed to produce an excellent balance of broad torque, upper-rpm horsepower, and throttle response for the street, with a maximum performance of 1,500-6,500 rpm. To top them off, we've added an Edelbrock Performer 600 cfm carburetor, a 14 in. chrome steel Summit Racing™ air cleaner, zinc plated Summit Racing™ carb studs, a set of ARP black-oxide coated chromoly intake manifold bolts, and a Fel-Pro Printoseal intake manifold gasket set.
( 1 )
$945.86
$861.78
On Sale
If you want to build a carbureted LS3 engine. Edelbrock's Performer RPM LS3 intake manifolds afford you that opportunity. Originally computer-controlled engines, you can top your LS3 with one of these Performer RPM manifolds and a carburetor to gain maximum power and a broad torque curve. They include provisions for a timing control module, passages for clean-look wiring, and a special throttle/transmission bracket to make these units an easy retro-fit. Go carbureted with Edelbrock Performer RPM LS3 intake manifolds.
( 1 )
$422.95
$380.66
On Sale
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$637.95
—
$945.95
$510.36
—
$756.76
On Sale
Holley EFI Gen V LT single plane intake manifolds are designed with an optimized runner layout and a constant cross-sectional area, resulting in a broad torque curve with the best vehicle performance from 2,500 to 7,000 rpm. The single-plane design provides the lowest throttle body flange height possible, while providing maximum performance all the way to 7,000 rpm. The cast aluminum construction makes these manifolds great choices for centrifugal blowers, turbochargers, or NOS applications. They are sold for pre-emissions control applications only and will not accept stock components and hardware. Available in two finishes, choose the one you prefer. Features: * Optimized runner layout and constant cross sectional area--broad torque curve * Minimum carburetor flange height--fit in vehicles with minimum hood modifications * Provides classic engine bay look of carburetor-style intake * Cast aluminum construction--great manifold for centrifugal blower, turbocharged, or NOS mild power adder applications * Efficient casting design--lightweight, consistent wall thicknesses, improved casting quality * Weight: 11.5 lbs. * Height: (front) 5.417 in. to the lifter valley cover flange at the engine block front flange and bellhousing flange * Port size: 2.33 in. height x 1.27 in. wide * FKM O-ring intake to cylinder head gaskets Notes: These intake manifolds are meant for GM Gen V LT engines equipped with OE-type GM Gen V LT cylinder heads where the intake flange bolt pattern and intake port opening locations match the OE Gen V LT port configuration. They are intended for OE direct injection and a 4150 EFI throttle body. Holley accessories available to allow the installation of a GM LS 92mm or 105mm drive-by-wire throttle body. Holley EFI Gen V LT 300-940 manifold is meant for street and performance engine applications with 5.3 to 6.2+ liters of displacement and maximum engine speeds of 6,000 to 7,000 rpm (depending on the engine combination). 4150/4160 square bore flange.
Not Yet Reviewed
$449.95
$403.95
On Sale
Victor intake manifolds make use of Edelbrock's extensive knowledge of induction technology to produce maximum power and torque and are designed for all forms of competition. These single-plane, high-rise manifolds are arguably the most popular and flexible manifolds in racing today. You'll find them on oval tracks, in drag racing, and on NASCAR engines because they boost power where these engines need it the most--from 3,000 rpm to 8,500 rpm. All Victors have extra material for port matching and are available to fit either square bore or Dominator carb flanges.
( 24 )
$476.95
—
$681.95
$429.26
—
$545.56
On Sale
Get super performance from Mr. Gasket! These Grade 5 hex head bolts are black coated plated for protection and appearance. They feature a generous underhead radius for added strength, and hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
( 4 )
$31.44
$28.30
On Sale
Holley continues to push the envelope of intake design with their latest offering: the Sniper fabricated dual plenum intake manifolds! This unique "dual plenum" design offers increased airflow and even dispersion of air to intake ports—solving the two most common problems experienced with many intakes. The manifolds are available in configurations and options for year/make and engine applications from the 1990s and up. Features and benefits of Holley Sniper fabricated dual plenum intake manifolds include: * Dual plenum design—ideal for street max effort engines and boosted applications * 3mm (1/8 in.) thick T-6061 sheet aluminum construction (for durability in high horsepower and boosted conditions) * 100 percent TIG-welded * Available in a choice of bright silver or black anodized finish * Equal runner lengths with tapered intake plenums designed to increase velocity and more evenly distribute airflow to all cylinders * Available in 92mm and 102mm bore throttle body openings * Long intake runner lengths (12.75 in.) offer low-end torque and operating range of 1600-6800 rpm
( 2 )
$1,449.95
—
$1,549.95
$797.95
—
$1,303.95
On Sale
These Grade 5 hex head and socket head intake manifold bolts are bright zinc plated for protection and appearance. Kits include hardened flat washers for uniform torque and to prevent galling on aluminum intake manifolds.
( 14 )
$17.60
—
$22.94
$15.84
—
$20.65
On Sale
Edelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct "line-of-sight" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.
( 53 )
$811.95
—
$1,687.95
$649.56
—
$1,350.36
On Sale
For maximum performance in normally aspirated competition applications, Weiand Hi-Ram Tunnel Ram intake manifolds are the manifold of choice. They're designed primarily for drag racing, truck/tractor pulls, and performance marine applications where high rpm is required but bottom-end torque isn't. With their patented D-shaped port runners and large plenum chamber, the manifolds provide optimum thrust of the air/fuel mixture to the intake ports. They mount either single or dual square-mount carbs and, depending on the application, have power bands that run from 2,500 rpm to as high as 9,000 rpm. Separate tops and runners are available for some manifolds. Order the model recommended for your year/make, engine, and cylinder head application.
( 31 )
$828.95
$745.95
On Sale
Holley LS 2x4 dual plane fuel injection intake manifolds allow you to install dual throttle bodies on your late model LS Series engines. Their dual plane, equal-distribution layout produces great midrange torque without compromising top-end power. The manifolds feature all cast aluminum construction, a wide 1,500 to 7,000 rpm power band range, and can accept dual inline mounted 1,000 cfm throttle bodies with a 1.750 in. maximum throttle bore diameter.
Not Yet Reviewed
$699.95
$384.95
On Sale
Summit Racing™ induction kit Pro Packs have a GM Performance Parts intake manifold designed to produce an excellent balance of broad torque, upper-rpm horsepower, and throttle response for the street. To top them off, we've added a Holley Street Avenger 770 cfm carburetor, a 14 in. chrome steel Summit Racing™ air cleaner, zinc plated Summit Racing™ carb studs, a set of ARP black-oxide coated chromoly intake manifold bolts, and a Fel-Pro Printoseal intake manifold gasket set.
Not Yet Reviewed
$1,328.36
$1,257.36
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
