Availability
Showing In Stock Items. Show All 15 Items.
On Sale
Summit Racing™ intake manifold and installation Pro Packs are now all in one part number. With Summit Racing™ intake manifold and installation Pro Packs, you can get your satin-finished, square-bore intake, plus all of the installation items that you need to finish the job, and save time and money! These Pro Packs also include Loctite black RTV sealant.
( 42 )
$506.85
$358.85
On Sale
Weiand dual plane Stealth intake manifolds feature long, separated runners for bottom-end and mid-range power, plus a special runner design and larger plenum to flow the air needed for high-rpm horsepower. They mount single, square-mount 4-barrels and make power from idle all the way to 6,000 rpm. That makes Stealth manifolds the perfect choice for your street/strip vehicle. Order the size and style needed for your cylinder head application.
( 154 )
$435.95
$391.95
On Sale
Get super performance from Mr. Gasket! These Grade 5 hex head bolts are black coated plated for protection and appearance. They feature a generous underhead radius for added strength, and hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
( 4 )
$31.44
$28.30
On Sale
These Holley intake manifold adapter kits let you mount older intake manifolds to the newer style center-bolt cylinder heads. They include four angled spacers with matching Allen head bolts to adapt Holley intake manifolds to the new-style heads.
Not Yet Reviewed
$399.95
$359.95
On Sale
Summit Racing™ tunnel ram and carburetor Pro Packs are made for horsepower, pure and simple. For folks with smaller cubic inch engines, we offer Weiand tunnel ram intakes with 450 cfm Holleys that'll deliver the horsepower you crave without saddling your rig with too much carb. For big-motor fans, we have the combo with 600 cfm Holleys. We include the linkage, too! Choose the cylinder head style application needed for your specific vehicle, and enjoy the enhanced performance of a Summit™ Pro Pack!
( 6 )
$1,686.84
$1,588.84
On Sale
These Edelbrock Victor EFI intake manifolds make it simple to convert competition engines to electronic fuel injection. They have injector bosses precisely positioned and machined for excellent fuel spray patterns and maximum power. These manifolds require a universal 4-barrel throttle body, fuel rail set, fuel injectors, fuel pump, and regulator, which are each sold separately.
( 2 )
$509.95
$407.96
On Sale
Edelbrock Performer RPM Air-Gap intake manifolds incorporate race-winning technology that's been used on Victor Series competition intakes for years. The open air space from the Air-Gap design separates the runners from the heat of the lifter-valley cover. So, the air/fuel mixture stays cooler all the way to the heads, which produces a denser charge for more power. Runners are tuned to move the power band 1,000 rpm higher than Performer Air-Gap manifolds, from idle to 5,500 rpm up to 1,500 to 6,500 rpm.
( 440 )
$648.95
—
$681.95
$519.16
—
$545.56
On Sale
These Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs include all of the necessary parts to change out your engine's induction system. They feature an aluminum intake manifold, carburetor, air cleaner, carburetor studs, and gaskets. Available for Ford, Chevy, Mopar, and Pontiac, these Summit Racing™ intake manifold, carburetor, and air cleaner Pro Packs will give your engine increased horsepower and torque and better drivability.
( 127 )
$824.87
—
$1,157.51
$775.87
—
$1,050.51
On Sale
Weiand Action Plus intake manifolds are designed for use as stock replacements, with improved power and torque characteristics. They're 180 degree, dual plane types, with a carburetor flange that'll accept either stock or aftermarket performance carburetors. Their effective rpm range runs from idle to 6,000 rpm. With their high-flow runner design and ability to produce increased power with little modification, it's no wonder these manifolds are so popular.
( 65 )
$412.95
$268.95
On Sale
Holley EFI Gen III Hemi Hi-Ram intake manifolds are for high performance applications where induction system height is not limited. Able to add even more power to your engine, these manifolds have large intake ports and a modular base design with runner lengths and tapered cross-sections that will perform well for a wide range of engine configurations. Their aggressive, bold, race-bred styling will make bad intentions clear for drag race, muscle car, marine, off-road, sandrails, pulling trucks, track, and street-rod applications. Holley EFI Gen III Hemi Hi-Ram intake manifolds feature cast aluminum construction offered with a natural satin or black finish. They are available with either a 95 or 105mm LS-style throttle body or as the manifold base alone for custom induction systems. Features and benefits: * Modular design base accepts a wide range of EFI tops and can be used as the foundation for custom induction systems * EFI fuel rails are machined for -8 AN O-ring fittings with passages large enough to accommodate high fuel flow and dampen pressure pulsations in the fuel system * Intended for use on naturally aspirated, forced induction, or nitrous engines in the 5.7L to 7.2+L range, and maximum power at 7,500 to 8,500 rpm * Works with Gen III Hemi injectors and Bosch EV-1 style injectors * O-ring seal to head offer superior OE-style sealing and are easy to replace * Billet oil fill cap offers an attractive low-profile design * Positive Crankcase Ventilation (PCV) ports with adapter fittings * Port for OE-style Manifold Absolute Pressure (MAP) sensor (1 or 2 Bar) * Cast-in pads for adding nitrous nozzles
( 2 )
$999.95
—
$1,499.95
$898.95
—
$1,348.95
On Sale
Holley Strip Dominator intake manifolds are classics that have been making power for Chevys for almost as long as Holley has been making carburetors. They're proven power builders, engineered to achieve maximum performance. Their single plane design, with a deep, open plenum and isolated runners, produces good power from 4,500 rpm to 7,600 rpm for small blocks, and up to 8,500 rpm on big blocks. There is no exhaust heat crossover.
( 35 )
$471.95
$423.95
On Sale
These CrossWind intake manifolds from Professional Products feature identical plenum and runner designs to the Typhoon. The main difference is that there is an open area under the plenum chamber. This feature is sometimes called an air gap design. The air flowing under the plenum provides a cooler charge for the incoming air with less heat transfer from the engine. This cooler air charge provides additional power.
( 43 )
$248.99
$224.09
On Sale
Holley EFI Gen III Hemi single plane intake manifolds provide maximum hood clearance combined with plenum and runner geometry that provides a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The isolated design of the air/fuel passages helps to increase charge air density and performance. Holley EFI Gen III Hemi single plane intake manifolds are great for turbocharger, centrifugal blower, or NOS power adders. Features: * Minimum carburetor flange height for maximum clearance to hood * 4150-type throttle/carb flange * Cast aluminum construction * Billet fuel rails * Billet aluminum oil fill cap * Mounting brackets for use with either Bosch EV1 or Gen III Hemi OEM fuel injectors * O-ring seals around ports * Natural or black finish available
( 2 )
$630.95
—
$649.95
$566.95
—
$583.95
On Sale
Holley single plane carbureted intake manifolds are designed to provide a broad rpm powerband for high performance street/strip engine applications to a maximum engine speed of 7,500 rpm. The carburetor mounting pads will accept all stock or aftermarket square-bore carburetors with manual or electric chokes. These Holley intake manifolds are also engineered to accept most stock hardware and accessory brackets—but offer performance features like: an updated plenum divider area; a 1 in. shorter height than their Strip Dominator manifold; and a choice of two distributor clamp locations. The isolated design of the air/fuel passages helps to increase charge air density and performance. Features include: * Single-plane with isolated plenum * Square-bore carburetor mounting flange * Isolated water crossover * Power band: 2,500 to 7,500 rpm * Height: Front 4.18 in., rear 5.28 in. * Port size: 1.92 in. height, 1.20 in. width
( 9 )
$573.95
$515.95
On Sale
Edelbrock Pro-Flo XT EFI intake manifolds combine a user-friendly design with the latest technology. They're manufactured from aluminum and are available in a natural, polished, or black powdercoat finish for ultimate protection. Pro-Flo XT EFI intakes feature eight equal-length tapered runners and a large plenum. The fuel-injected manifolds are designed to deliver maximum horsepower and a broad torque curve throughout the 1,500 to 7,000 rpm range. Choose the model designed for your vehicle and cylinder head style application.
( 15 )
$702.95
$562.36
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
