Availability
Showing In Stock Items. Show All 13 Items.
On Sale
Why convert your LML's fuel system from a CP4 to a CP3? Since its introduction, the CP4 has proven to be less reliable and less capable than the CP3 used in previous Duramax platforms—resulting in costly repairs for owners when a CP4 fails. You can improve your LML Duramax's reliability and fueling capability, as well as avoid costly failure with Fleece Performance LML CP3 conversion kits. They provide OEM fit-and-finish features, like Fleece's exclusive molded hoses for the fuel feed and return, high flow CP3 fuel fittings, and their valley feed line to support aftermarket lift pump applications. Fleece Performance LML CP3 conversion kits are offered with or without pump and the pump kits come in two different style pumps—a Bosch CP3 injection pump or Bosch CP3 pump with heavy-duty 10mm cam. Choose the kit that is right for you. All kits include: * CP3 to rail high pressure fuel line * High-flow CP3 feed and return fuel fittings * Preformed fuel feed and return fuel hoses * CP3 mounting adapter * Dosing injector distribution block, feed and return lines * FCA extension harness * Low pressure fuel feed line * Hardware kit
Not Yet Reviewed
$1,999.00
—
$2,599.00
$1,699.15
—
$2,209.15
On Sale
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$349.95
—
$649.95
$314.95
—
$583.95
On Sale
When it comes to converting to EFI, it's important for the fuel pump to be installed in a cool area and what better place than in the gas tank itself. The pump is cooled by the fuel, it's quieter plus there's no chance of fuel starvation. To help ease the installation of an in-tank pump, we offer a new Go Fuel In-Tank Module assembly. This universal billet assembly can be used on tanks with a depth of 6 to 15 inches. The billet aluminum was designed with the supply and return ports in a parallel position to help route the fuel lines easily and evenly. The vent port is on the other side to ease routing the line near the fill tube. The two fuel ports are threaded to accept -6 AN O-ring boss fittings for a secure, leak-free connection. The cut-to-fit bracket secures a 340 LPH pump capable of providing fuel to 600 horsepower engines. To ensure clean fuel is pulled into the pump, two size of sock/filters are provided, a standard 11 square-inch design as well as a large, 35 square-inch version. Go Fuel in-tank modules are a direct fit into fuel tanks offered by TANKS Inc.
( 26 )
$150.00
—
$532.00
$135.00
—
$478.80
On Sale
Holley in-tank retrofit fuel modules are the easiest way to convert your vehicle's factory tank or fuel cell to an in-tank, EFI fuel system—and gain all the benefits of a Holley Hydramat reservoir, as well. This conversion requires only basic tools, no welding or fabrication. The low-profile, aluminum module design includes a billet pump hanger bracket to control vibration; Holley's innovative clamping system and integrated fuel pump allow you to locate the module anywhere in the tank beside your existing sending unit. Once installed, simply hook up your fuel lines and your power source/ground, and you're ready to roll. Holley in-tank retrofit modules are available with fuel pumps for both return and returnless-style systems—and models to support various liters per hour (LPH). Additional details: * Installs in any fuel tank to fit a wide range of applications * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance * Clamping system allows you to rotate the unit 360 degrees for easier clocking of plumbing and wiring * Hydramat fuel reservoir's 3 x 15 in. mounting flange has six clocking pin locations for 360 degree adjustment * Black anodized aluminum construction to resist corrosion * 1/4 in. NPT ports available for numerous plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Optional rollover valve available
( 9 )
$799.95
—
$999.95
$718.95
—
$898.95
On Sale
You will not find an easier way to upgrade your fuel system than the Holley Sniper OE Style 350 LPH EFI Fuel Pump Modules. They are a direct replacement that fits your factory fuel tank, so you don't have to guess when it comes to something as important to your project as the fuel system. Because it was designed as a direct replacement for your factory pick-up and sending unit, there is no need to purchase a custom EFI fuel tank. You can even retain your factory fuel line. Simply connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earl's Vapor Guard Line. Features: * The in-tank fuel pump module is a high-pressure unit that flows 350 liters per hour (LPH) and is capable of supporting EFI (electronic fuel injection) engines producing up to 750 horsepower * Includes a pre-calibrated fuel-level sending unit designed to work with the factory fuel gauge for your application * Solves all the usual issues of converting from carburetor to EFI
( 28 )
$339.95
—
$649.95
$305.95
—
$583.95
On Sale
When converting your fuel system to a return-style EFI setup, the biggest challenge can be plumbing the fuel lines. Holley has found a way to make this job easier! They offer EFI filter regulator assemblies to simplify your installation—by combining the fuel filter and regulator in one unit that can be mounted in the rear of the vehicle. Mounting in the rear means less line to run for a return and less mess. These regulators feature a 175 gph, 10 micron fuel filter built-in. The regulators are preset at 59.5 psi. They're available with 3/8 in. NPT or -8 AN port sizes to match most common EFI fuel systems. Simplify your EFI conversion, or clean up the plumbing on your current EFI system, by installing a Holley EFI filter regulator. (Diecast EFI fuel regulators are also available by Holley.)
( 23 )
$232.95
$209.65
On Sale
Holley diecast in-tank retrofit fuel pump modules are quick and easy ways to convert your factory tank or fuel cell into an EFI in-tank fuel system, while also adding the benefits of a Holley HydraMat in the process! The conversion is easily accomplished with basic tools and requires no welding or fabrication. The aluminum module design includes a diecast pump hanger bracket to control pump vibration, while also providing a low-profile design to fit where space is at a premium. Holley's innovative clamping system and integrated fuel pump makes it a simple install. Interested in an EFI retrofit kit, but can't get past the complicated fuel system? Holley diecast in-tank retrofit fuel pump modules are your solution. They're available in various flow rates, as well as return and returnless versions. Features include: * Installs in any fuel tank from 6.5 in. to 12 in. deep (depending on kit) to fit a wide variety of applications * The low-profile design is only 1.275 in. above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit * The clamping system allows you to rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations under your ride * Includes innovative Holley HydraMat to ensure consistent fuel supply. The 3 in. x 15 in. HydraMat mounting flange has six clocking pin locations to allow for 360 degrees of adjustment to clear sending unit levels or any tank floor restrictions that you might encounter * Diecast aluminum construction for corrosion resistance and long-lasting good looks * 1/4 in. NPT ports for a wide variety of plumbing options * Ideal for Terminator EFI, Sniper EFI, MSD Atomic EFI, or any TBI or EFI conversion * Two different fuel pumps are available—255 lph or 400 lph for both return and returnless-style systems
( 13 )
$399.95
—
$777.95
$359.95
—
$583.95
On Sale
These fuel pump block-off plates cover the opening left when you convert from a mechanical to an electric fuel pump. They're made from precision-cut steel that's highly polished and chrome plated. Gaskets are included.
( 28 )
$13.99
—
$18.86
$9.09
—
$12.59
On Sale
JET adjustable TPI fuel pressure regulators enable you to obtain maximum efficiency and horsepower gains in a tuned port injection system. Unlike other designs, these JET regulators incorporate a steel insert on the adjuster to avoid stripping. Convert your factory regulator to an adjustable-style TPI fuel pressure regulator for the performance you demand!
( 3 )
$119.96
$107.96
On Sale
Holley Street Performance mechanical fuel pumps are designed to work with stock or mildly modified engines. Ranging in performance styles of 80 to 225 gph, their body castings can be rotated 360 degrees to ease mounting in difficult places and they have large orifices for high flow rates. These pumps are not compatible with methanol or alcohol fuels and should not be used with fuel injection systems. A fuel pressure regulator is required for 130 gph versions.
( 357 )
$142.95
—
$236.95
$121.95
—
$213.25
On Sale
Holley Sniper offers OE-style 255 lph EFI fuel pump modules for a wide range of vehicles, including many Chevy, Pontiac, Buick, Oldsmobile, GMC, Ford, Mercury, Jeep, Dodge and Plymouth cars and trucks from the 1950s, '60s, '70s, and '80s. These in-tank modules are high-pressure units that flow 255 liters per hour (LPH) and are capable of supporting electronic fuel injection (EFI) engines producing up to 550 hp. A pre-calibrated fuel level sending unit designed to work with the factory fuel gauge for this application is included. Each module also features a HydraMat filter which has a unique internal reservoir that keeps fuel available at the pick-up and also provides protection from contaminates. Fuel pressure is internally regulated to 58 psi, eliminating the added expense and effort of purchasing and installing an external fuel pressure regulator; no separate return line is required because these modules return excess fuel right inside the tank! The Holley Sniper EFI fuel pump module was designed as a direct replacement for your factory pick-up and sending unit. There's no need to purchase a custom EFI fuel tank. You can even retain the factory fuel hard line—just connect the outlet of the pump module to the hard line on your vehicle with EFI-rated fuel hose and hose clamps available in the Earls Vapor Guard line.
( 10 )
$449.95
—
$514.95
$403.95
—
$462.95
On Sale
Mr. Gasket mechanical fuel pumps are rated from 80 to 110 gph in a variety of applications for many Chevrolet, Ford, Chrysler, and Pontiac V8 engines. Mr. Gasket fuel pumps are suitable for use with street performance and high-output racing applications when a mechanical pump is desired or required. Features include: * Shutoff pressure pre-set from 6.5 to 8 psi depending on application * Fuel pressure regulator is not required due to built-in shutoff * Heavy-duty aluminum construction for continuous high-rpm operation * Lower pump body can be clocked in different positions to adapt to orientation requirements * Inlets and outlets tapped for 1/4 in. or 3/8 in. NPT to match specific applications
( 32 )
$110.95
—
$199.95
$99.85
—
$179.95
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
