Availability
Showing In Stock Items. Show All 26 Items.
On Sale
Holley Sniper 3.5 GPM Twin Pump and Manifold Kits are designed for high performance naturally aspirated and forced induction EFI vehicles. The twin pump manifold utilizes -10 AN male inlet and -8 AN male outlet connections for easy installation on new applications and for quick replacement of existing competitor fuel pumps. They support over 1,000 hp Compatible with Gasoline or E85. The Max Flow is 3.5 gpm @13.5V and 4 gpm @18V. The pump manifold assembly is made from billet, anodized, and laser etched for good looks. The manifold inlet and outlet manifolds have 2 ORB ports each to accommodate for different mounting and plumbing situations. Plugs are included to seal off unused ports. The kit includes connectors, seals and detailed assembly instructions. Holley Sniper 3.5 GPM Twin Pump and Manifold Kits feature: * Max amperage: 20A (per pump) * Rated for gas and E-85, pump life will be diminished if used with 100 percent ethanol fuels * Billet, anodized, laser etched components for good looks * Manifold -10 AN male inlet fitting and -8 AN male outlet fitting included, others must be purchased separately * Pump I/O: -8 AN ORB * Pumps can be staged or ran in parallel * Inlet and outlet manifolds have 2 ORB ports each to accommodate for different mounting and plumbing situations. Plugs are included to seal off unused ports * Wiring kits for each pump that contain connectors and seals included * Detailed assembly instructions included * Can be used in both EFI and carbureted fuel systems
( 2 )
$435.95
$391.95
On Sale
Holley Sniper in-tank retrofit fuel pump modules offer the easiest way to convert your vehicle to an in-tank EFI fuel system. Available in return and returnless versions, these 340 lph pumps are easy to install with basic hand tools and require no welding or fabrication. They include a diecast pump hanger bracket to control pump vibration in a low-profile design that's perfect wherever space is at a premium. You can locate the module beside your existing sending unit anywhere in the tank and rotate it a full 360 degrees to work flawlessly with various plumbing and wiring configurations. Once the module is installed, all you need to do is connect your power source/ground and fuel lines. Up your fuel game with an assist from the Holley Sniper in-tank retrofit fuel pump modules best suited for your application. Features and specs include: * Models available for various fuel tank depths, including adjustable (7-12 in.) versions * The low-profile design is only 1.275 in. thick above the tank mounting surface for added clearance when needed * The innovative clamping system allows you to locate the module anywhere in the tank beside your existing sending unit and rotate the unit 360 degrees for easier clocking of the plumbing and wiring locations * Diecast aluminum construction for corrosion resistance and long-lasting good looks
( 28 )
$649.95
$583.95
On Sale
Holley billet EFI return-style fuel pressure regulators are space saving options when mounting on the end of the fuel rail or near the throttle body. They are preset at 59.5 psi, and the cap can be removed and re-oriented to suit the desired fuel routing. These Holley EFI fuel pressure regulators feature 6061 T-6 billet aluminum construction, and are machined for all SAE6 ports with three -6 AN fittings included, plus an extra plug to replace one fitting when installed post throttle body/fuel rail. They are compatible with Holley Sniper or Sniper Stealth among other applications, and available with either an all-black or a black/clear anodized finish.
( 6 )
$249.95
$224.95
On Sale
Holley bypass fuel pressure regulator kits are part of a complete line of fuel system products from Holley. Offering several different kits, each features a billet or diecast aluminum regulator with an adjustable psi for precise fuel pressure changes and they are finished for corrosion resistance and good looks. The regulators are fitted with a 1/8 in. NPT gauge port and include an Earl's fuel pressure gauge, three adapter fittings, a barbed fitting for the vacuum port, a mounting bracket, and all necessary hardware. Choose the kit to best fit your project's needs and performance.
( 30 )
$269.95
$242.95
On Sale
Part of Holley's complete line of fuel system products, Holley HP billet fuel pressure regulators are available in a variety of configurations for carbureted or fuel injected engines. Some versions are even adaptable to either carburetors or EFI. They allow you to upgrade a carbureted system to EFI without replacing the fuel pressure regulator. All HP billet fuel pressure regulators feature a 2-port design, provide for precise fuel pressure adjustments, and are available in your choice of demand (no return line) or by-pass (with a return line) styles. Depending on the model, they are for use only with electric fuel pumps, or with either mechanical or electric pumps. Designed for street/strip applications, they are CNC-machined from 6061 T-6 billet aluminum for strength and have bright dip anodized black bodies with clear dip anodized tops for corrosion resistance and good looks. Whatever your fuel system needs, Holley has you covered. Depending on model, features may include: * Adjustable from 4 to 65 psi for use with EFI or carburetors * 4.5 to 9 psi adjustment range for use with carburetors only * EFI-only models are adjustable from 15 to 65 psi * Two port sizes available, 3/8 in. NPT or -6 AN inlet/outlet and return (where applicable) * Fitting for manifold reference * 1/8 in. NPT gauge port * Boost reference--1:1
( 161 )
$149.95
—
$272.95
$134.95
—
$245.65
On Sale
Aeromotive VaporWorx KPM1500 fuel pump/returnless PWM control systems include a KPM1500 fuel pump modified with a high-pressure regulator, returnless pulse width modulation control system, and other modifications to make them work properly for most US-based vehicles. The KPM1500 features twin OEM Bosch PWM compatible pumps, fully re-engineered pump support system, robust venturi pump systems, integral safety overpressure valves, and a built-in anti-reversion/check valve, making each fuel pump very much like an OEM part. The outlet nipple has been strengthened to reduce the chances of breakage, and their operation is smooth, quiet, and easy to control. VaporWorx PWM (pulse width modulation) kit contains everything needed to drive the KPM1500 electrically in either constant/static or manifold referenced pressure modes. These kits are intended to be used as standalone control systems. No additional relays, Hobb's switches, etc. are needed. Features: * VaporWorx modified KPM1500 fuel pump module make the OEM chassis wiring plug-and-play * Approximately 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. Practically eliminates vapor lock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Total size 4 in. L x 2.1 in. W x 1 5/8 in. H * Over-temperature shutdown with automatic reset operates indefinitely without damage * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies (where appropriate)
Not Yet Reviewed
$2,917.70
$2,625.93
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM kits for ZL1 fuel pump modules have everything needed to provide a standalone, OE-type returnless fuel system with constant or manifold referenced fuel pressure. When used with the popular and affordable GM Gen5 ZL1 Camaro, C7 Corvette, Aeromotive Super ZL1, and many other GM-compatible fuel pump modules, these systems will provide constant pressure or any base pressure with a 1:1 manifold referenced (supplied MAP sensor based) fuel pressure—operating like a mechanical fuel pressure regulator would with the ECM calibrated in the same manner. The simplicity of these kits comes with connecting the supplied standalone MAP sensor to the pressurized side of the intake manifold, just like connecting a boost gauge or manifold referenced fuel pressure regulator. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected. BoostWorx ZL1 controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
( 1 )
$525.15
—
$577.15
$472.64
—
$519.44
On Sale
Holley Sniper EFI universal bypass fuel regulators are for use with fuel systems in street or track applications. They feature adjustable base pressure from 40-130 psi, a gauge port, and a boost reference port. These regulators are ideal for vehicles/systems where superior flow and pressure control are needed. Each unit is precision-machined from 6061-T6 billet aluminum for strength and durability—and features a black, bright dip anodized body and clear bright dip anodized top for corrosion resistance and good looks. Choose from -6 or -8 AN inlet/outlet return fitting sizes. Product features: * Longer spring for wider range of adjustment (40-130 psi) * Oversized bypass orifice and corrugated diaphragm for superior flow * Constructed of billet aluminum with a black anodized base and top for good looks * Offered in -6 and -8 ORB configurations * Used in systems with a return line back to tank * 1/8 in.-NPT boost reference port (ratio 1:1) * 1/8 in.-NPT fuel gauge port * Alcohol fuel and race gas compatible * Includes mounting bracket, hardware, and an 1/8 in.-NPT barb fitting for manifold reference
( 1 )
$188.95
$170.05
On Sale
Aeromotive VaporWorx ReturnX return-type PWM controllers have everything needed to provide a standalone fuel pump speed control system. Available for single or dual pump, naturally aspirated or supercharged applications, no switches, relays, or Hobb's switches are needed when using these ReturnX systems. Controllers have primary and secondary output with the primary providing sufficient pump speed to maintain fuel pressure during idle/cruise while the secondary pump follows at a lower duty cycle. This leader/follower arrangement delivers a smooth ramp-up in pump speed until both pumps are at full output. For carbureted and EFI applications, simply attach the supplied standalone MAP sensor hose to a manifold vacuum source (naturally aspirated) or past the supercharger/turbocharger and make at-idle controller adjustments--the VaporWorx controller will do the rest. Select the single or dual naturally aspirated or supercharged version needed for your setup. Key features: * Works with all brushed-type fuel pumps * Typical power reduction to the pump(s) of 45 to 75 percent * Standalone MAP-based fuel pump speed control * Carburetor and EFI capability Benefits: * Everything needed electrically to drive the fuel pump(s) * A significant reduction in the average fuel pump power requirement resulting in lower fuel temperatures and longer pump life * 40 to 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset will operate indefinitely without damage * Short circuit output protection will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating range -- Can be used with voltage boosters -- Lower than 10 V applied to the turn-on circuit will cause controller shutdown to protect from an AFR lean condition
( 1 )
$502.90
—
$630.20
$452.61
—
$567.18
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM controllers for dual fuel pump applications have everything needed to provide a standalone, OE-type returnless fuel system. They provide a 1:1 manifold referenced fuel pressure using the VaporWorx supplied standalone MAP sensor and mounting bracket, acting just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. BoostWorx PWM dual-pump controllers feature: * Everything needed electrically to drive the fuel pump module--no relays or Hobb's switches are required * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection with automatic reset * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor * Second pump turn-on set to 4 psi * The PWM controller supports Aeromotive's line of 340 lph in-tank pump
Not Yet Reviewed
$683.25
$614.92
On Sale
FASS Fuel Systems adjustable fuel pressure regulators are intended for aftermarket performance applications requiring higher fuel pressures than a typical daily driver. These applications can vary from drag race vehicles, competition pulling trucks, or high performance marine applications. FASS regulators have pre-drilled and tapped fuel pressure gauge ports that will make adjusting your regulator simple, eliminating any guesswork. In addition, FASS added a performance benefit by engineering a boost compensation port. This will allow you to run a line from your manifold to increase fuel pressure—very beneficial when under active acceleration and fuel demand has been increased. Additional product features: * Adjustable fuel pressure from 0-100 psi * Built-in fuel pressure port * Boost compensation port * 1/2 in. NPT fuel line inlet and outlet
( 5 )
$141.55
$127.40
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM kits for Ford GT have everything needed to provide a standalone, manifold referenced, OE-type returnless fuel system. When used with the low-cost Ford/Motorcraft PFS1215 fuel module, the systems will provide a 42 to 60 psi base pressure with a 1:1 manifold referenced fuel pressure change for up to 25 psi of boost--just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. The system's key to simplicity is the standalone manifold pressure sensor that tells the BoostWorx controller how to adjust the fuel pressure. Simply connect the hose from the pressure sensor mount to the intake manifold, set the fuel pressure according to the need, and you're done. The controllers can also be used with any engine that needs to have a separate MAP sensor for manifold referenced fuel pressure, and they can be used in constant pressure mode by removing the vacuum line or MAP sensor wiring, and the controller will provide a constant pressure. BoostWorx GT controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability when combined with the OEM-style fuel module * A minimum 50 percent reduction in power to the fuel pump during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
Not Yet Reviewed
$577.15
$519.44
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM kits for CTS-V fuel pump modules have everything needed to provide a standalone, OE-type returnless fuel system with constant or manifold referenced fuel pressure. When used with GM CTS-V2 and compatible fuel pump modules, this system will provide constant pressure or any base pressure with a 1:1 manifold referenced (supplied MAP sensor based) fuel pressure—operating just like a mechanical fuel pressure regulator would with the ECM calibrated in the same manner. The simplicity of these kits comes with connecting the supplied standalone MAP sensor to the pressurized side of the intake manifold, just like connecting a boost gauge or manifold referenced fuel pressure regulator. For constant fuel pressure simply leave the MAP sensor portion of the kit disconnected. BoostWorx CTS-V controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
Not Yet Reviewed
$577.15
$519.44
On Sale
Aeromotive VaporWorx BoostWorx PWM controllers for CTS-V LSA applications have everything needed to provide a standalone, OE-type returnless fuel system that meets the GM LSA crate engine fuel pressure requirements. Please note, these kits are intended to be used with the GM LSA ECM and a wiring kit for the LSA engine only. When used with the CTS-V fuel module, these controllers provide the needed manifold referenced (MAP sensor based) fuel pressure that cannot be met with traditional return-type pressure regulators. BoostWorx PWM CTS-V LSA fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, external regulators, or return lines needed -- 750 hp capable * Unmatched low fuel level capability when used with an OEM-style fuel module * Calibrated specifically for the LSA crate engine controller * A 50 percent reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness from the controller to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition
Not Yet Reviewed
$502.90
$452.61
On Sale
MSD electric fuel pump boosters will supply your electric fuel pump with increased voltage in relation to the manifold boost pressure. The amount of voltage is adjustable with a potentiometer, from a range of an additional 1.5 V to a maximum output of 22 V, over a range of 5–30 psi.
( 1 )
$699.95
$628.95
On Sale
Aeromotive fuel pressure regulator breathers make ideal replacements (where required) for the vacuum/boost ports found on all Aeromotive bypass regulators. They're machined from quality materials and feature male threads. A sintered brass filter allows air to move into and out of the regulator cap as needed while preventing dirt and debris from entering. Aeromotive fuel pressure regulator breathers work perfectly for any application that does not require fuel pressure to be influenced by manifold pressure.
( 3 )
$9.85
$8.86
On Sale
Turbosmart fuel pressure regulators ensure maximum precision with smooth fuel pressure delivery. Manufactured from billet aluminum that's anodized, these hand-assembled Turbosmart regulators provide a stable 1:1 ratio between fuel and manifold pressure. The regulators feature an easy screw and lock adjustment and work well with mechanical and electric fuel pumps. Several models are available for race cars with up to 3,000 hp fuel systems (FPR-3000) and modified street cars with up to 800 hp fuel systems (FPR-800) using a fuel pump. If you've installed fuel injectors or a high-flow fuel pump, or you're trying to maximize your standard fuel system for the extra power mods you've added, these regulators are ideal. Maintaining constant fuel pressure under all conditions from idle to full throttle is the function of Turbosmart fuel pressure regulators.
( 1 )
$235.95
—
$256.95
$188.76
—
$205.56
On Sale
Aeromotive VaporWorx BoostWorx PWM controllers for ZL1 LSA applications have everything needed to provide a standalone, OE-type returnless fuel system that meets the GM LSA crate engine fuel pressure requirements. Please note, these kits are intended to be used with the GM LSA ECM and a wiring kit for the LSA engine only. When used with the Gen5/6 Camaro ZL1 fuel module, these controllers provide the needed manifold referenced (MAP sensor based) fuel pressure that cannot be met with traditional return-type pressure regulators. BoostWorx PWM ZL1 LSA fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, external regulators, or return lines needed -- 650 hp capable * Unmatched low fuel level capability when used with an OEM-style fuel module * Calibrated specifically for the LSA crate engine controller * A 50 percent reduction in power to the fuel module during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness from the controller to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition
Not Yet Reviewed
$502.90
$452.61
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM kits for Ford GT500 have everything needed to provide a standalone, manifold referenced, OE-type returnless fuel system. When used with the low-cost Ford/Motorcraft PFS1314 fuel module, the systems will provide a 42 to 60 psi base pressure with a 1:1 manifold referenced fuel pressure change for up to 25 psi of boost--just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. The system's key to simplicity is the standalone manifold pressure sensor that tells the BoostWorx controller how to adjust the fuel pressure. Simply connect the hose from the pressure sensor mount to the intake manifold, set the fuel pressure according to the need, and you're done. The controllers can also be used with any engine that needs to have a separate MAP sensor for manifold referenced fuel pressure. BoostWorx GT500 controllers feature: * Everything needed electrically to drive the fuel pump module--no relays, external regulators, or return lines are required * Unmatched low fuel level capability when combined with the OEM-style fuel module * A minimum 50 percent reduction in power to the fuel pump during idle and cruise vs. traditional systems * 40-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection that will operate indefinitely without damage * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor
Not Yet Reviewed
$577.15
$519.44
On Sale
Aeromotive VaporWorx BoostWorx PWM controllers for DualX ZL1 universal applications simplify installation and increase overall fuel system performance for dual OEM ZL1 fuel module applications. DualX uses a progressive ramping strategy with connections on the controller for the primary (pump 1) and follower (pump 2). The follower pump runs at lower duty cycle than the primary, allowing the follower pump to be on at all times, but at a lower average power, and allowing the pumps in the follower module to continually fill the reservoir with fuel, so it is ready to feed the engine under the most challenging conditions. As the primary pump increases in duty cycle, so does the follower, and once the primary is at 100 percent, the follower continues to increase to 100 percent duty cycle, as needed. This strategy is automatic and requires no user programming or adjustments. BoostWorx PWM DualX ZL1 fuel module controllers feature: * Everything needed electrically to drive the fuel pump module -- No relays, Hobb's switches, or filters needed -- OEM fuel level sensor can be used if desired * Unmatched low fuel level capability * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * Single 20 ft. wiring harness to the fuel module * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * Can be used in constant or manifold referenced fuel pressure modes -- Manifold referenced suggested to further reduce electrical demand
Not Yet Reviewed
$630.20
$567.18
On Sale
Aeromotive VaporWorx BoostWorx returnless PWM controllers for triple fuel pump applications have everything needed to provide a standalone, OE-type returnless fuel system. They provide a 1:1 manifold referenced fuel pressure using the VaporWorx supplied standalone MAP sensor and mounting bracket, acting just like a mechanical fuel pressure regulator would with the ECM tuned in the same manner. BoostWorx PWM triple-pump controllers feature: * Everything needed electrically to drive the fuel pump module--no relays or Hobb's switches are required * Up to a 2/3 reduction in power to the fuel module during idle and cruise vs. traditional systems * 80-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection with automatic reset * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate * All cross-linked polyethylene wiring * UL94 rated components used throughout * Integrates into the OE ECM to allow all safety systems to remain functional * 10 to 22 V operating capacity -- Can be used with voltage boosters -- Lower than 10 V applied to the turn on circuit will cause controller shutdown to protect from an AFR lean condition * Must be used in manifold referenced fuel pressure mode * Billet aluminum VaporWorx MAP sensor bracket and 3bar pressure sensor * Second pump turn-on set to 4 psi * The PWM controller supports Aeromotive's line of 340 lph in-tank pumps
Not Yet Reviewed
$683.25
$614.92
On Sale
Aeromotive BoostWorx returnless KPM1500 PWM electronics kits are compatible anywhere that a Gen5 Camaro/SS/CTS-V-type fuel pump module is used and needs a standalone returnless control system. They include the needed parts to convert the KPM1500 (not included) for higher pressure and/or use with a standalone returnless PWM control system. Using pulse width modulation (PWM) is effective in keeping fuel temperatures down and relieving the electrical system of excessive load. These kits can drive the fuel pump electrically in either constant/static or manifold referenced pressure modes. Features: * Everything needed electrically to drive the KPM1500 fuel pump in a standalone arrangement (no fuel system control module) * Approximate 71 percent+ reduction in power to the fuel pump during idle/cruise vs. running both pumps full speed all the time. * Practically eliminates vaporlock/cavitation caused by overheated fuel * Fully returnless (external inline filter required) * 60-amp minimum continuous power rating in a compact controller package * Over-temperature shutdown with automatic reset * Short circuit protection * OEM Delphi/Aptiv connections for terminals, seals, and connector bodies, where appropriate. * All cross-linked polyethylene wiring * Safety overpressure regulator to replace the KPM 50 psi part * UL94 rated components used throughout
Not Yet Reviewed
$530.45
$477.40
On Sale
aFe DFS 780 fuel pumps are powered by your stock ignition and can be run independently or in parallel with the factory fuel pump. They feature helical bronze spur gears that are more forgiving of contaminants than steel gears and they run quieter than normal straight-cut gears. The billet aluminum manifold holds the fuel pump and houses the clear high-impact polycarbonate sight glass for visual inspection of fuel. These fuel pumps are supplied with a plug-and-play wiring harness with Deutsch weather-proof connectors; no cutting or modification is required for installation. High-quality Viton® seals are used, making them compatible with both diesel and biodiesel fuels.
( 1 )
$808.00
—
$999.00
$727.20
—
$899.10
On Sale
Aeromotive offers true billet fuel pressure regulators designed to meet the performance requirements of Ford engines. Their Ford fuel pressure regulators feature a stainless steel spring, custom-designed to provide the regulation required by Ford's 4.6 and 5.0L engines.
( 47 )
$256.75
$231.08
Modal Header
Truck / SUV
Jeep®
Restoration
Stock Replacement
Late Model Muscle
Tools
Gifts, Clothing, & More
Circle Track
Street Rod
Powersports
Paint & Body
Marine
Jr Dragster
